Cable Commissioning Meaning Jobs in Usa

Cable Technician - Onsite in Arlington, VA

Your Impact
Own your opportunity to support mission-critical operations for the largest government agency in the nation. Make a meaningful impact by advancing the Department of Defense's mission to keep our country safe and secure.

Job Description:

AGE Solutions is looking for a Cable Technician to join our team onsite at the Pentagon in Arlington, VA in support of our DoD customer. Due to the nature of work this role entails, telecommuting is not permitted and will require the employee to report full-time onsite.

The Cable Technician is responsible for installation and documentation of new and/or updated Inside Plant cable infrastructure to include conduit, cable trays, copper, coax, fiber and all associated elements in the Pentagon, Mark Center & buildings within the National Capital Region (NCR).

Responsibilities Include:

• 
  
• Analyzes, administers, and maintains telecommunications and network cabling infrastructure.
  
• Responsible for tasks assigned by Coordinators in connection with service orders and repair activities related to Category 6 cabling, Voice over IP networks (VOIP), and fiber optic cabling infrastructure.
  
• Installs, maintains and repairs voice and data communications systems.
  
• Interprets service orders, circuit diagrams, and electrical schematics.
  
• Tests, locates, installs, and repairs cabling infrastructure associated with trouble calls, and performs routine maintenance.
  
• Verifies work order information and receipt of all necessary equipment and information.
  
• Verifies service by testing installed cabling, identifying, correcting, or escalating problems.
  
• Well versed in the use of network cabling test equipment including network testers, copper cable testers, fiber OTDRs and fiber power meters.
  
• Documents network by labeling and routing equipment and cables; recording configuration diagrams and specifications.
  
• Maintains network by troubleshooting and repairing outages; testing network back-up procedures; updating documentation.
  
• Identify, track and remove abandoned cable, and keep cable neatly tied and bundled while maintaining safety standards.
  
• Dress, terminate and test cables and components including CAT6 and fiber optic cabling.
  
• Must follow JSP and commercial best practice procedures, standards required for installation of cable racks, wiring of the racks and testing required during installation.
  
• Participates in special projects as required.
  

What you'll need to succeed (Required):

• 
  
• Citizenship and Clearance:
  
  • 
    
  • US Citizenship is required.
    
  • Must have and maintain an active DoD Top Secret security clearance.
    
  
  
  
• Education:
  
  • 
    
  • Associate's degree.
    
  • An additional 2 years of related technical experience may be substituted in lieu of degree.
    
  
  
  
• Years of Experience:
  
  • 
    
  • A minimum of 3 years' experience (5 years without an associate degree)
    
  
  
  
• Skills and Knowledge:
  
  • 
    
  • Must be familiar with BICSI rules, regulations, and standards.
    
  • Must have the ability to communicate effectively to personnel of various expertise levels, possess robust customer support skills in a high visibility environment, and maintain a high attention to detail and accuracy.
    
  • In-depth knowledge of TDM networks.
    
  • Ability to work with power tools and ladders.
    
  • Ability to work well with others and communicate with supervisors.
    
  • Computer literate with basic Networking Skills.
    
  • Maintain current knowledge of relevant technologies as assigned.
    
  
  
  
• Travel Required: 25-50%
  

Preferred Qualifications:

• 
  
• Certification:
  
  • 
    
  • BICSI Installer 1 (INST1) | Building Industry Consulting Service International (BICSI) - Must be willing to obtain within 90 days of joining.
    
  
  
  

Work Environment and Physical Demand:

• 
  
• Prolonged periods of sitting and working at a computer.
  
• May require ability to lift up to 50 lbs.
  
• May require the ability to crawl on the floor and in tight spaces, and climb ladders and elevated platforms to install equipment, cables, and fiber.
  

Compensation: $65,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

AGE Solutions is preparing for a significant contract supporting the Joint Service Provider (JSP) Enterprise Transport Management (ETM) program. We're seeking hands-on, field-ready professionals to lead and execute structured cabling projects cross secure government environments. These roles require deep experience with fiber layouts, cable pathways, inside/outside plant, and installation best practices per BICSI standards.

Who We're Looking For:

• 
  
• RCDD Technicians, Fiber Leads, Infrastructure Installers
  
• Execute large-scale fiber and copper infrastructure projects
  
• Read and implement cable layouts and splicing diagrams
  
• Maintain compliance with pathway and safety standards
  
• Incumbents encouraged to apply
  

Clearance: TS/SCI
Certifications: RCDD, BICSI
Experience: 10 to 25 years

This position is part of a pipeline for a future opportunity supporting the JSP ETM program. Employment is contingent upon contract award and government customer approval. AGE Solutions is actively engaging talent ahead of award and encourages both current incumbents and new candidates to express interest.

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

• 
  
• Assist with managing projects, plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects.
  
• The commissioning experts adhere to a thorough quality management/QC process and procedures.
  
• Participate in daily commissioning activity meetings which services include: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation.
  
• Prepare commissioning test procedures and reports with limited supervision as needed; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals.
  
• Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning.
  
• Integrated system testing; Load Bank Testing; Compilation of all testing procedure results.
  
• Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc.
  
• System Assembly; Commission plan preparation; Follow company QC process and procedures.
  
• Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project.
  
• Interface with clients, contractors, equipment vendors and owners' agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc.
  

• 
  
• 3-5 years' experience in the Engineering Field
  
• A/E experience working in complex facilities or mission critical projects a big plus
  
• Previous Data Center / Mission Critical experience is preferred
  
• Electrical equipment testing experience in a Critical Facilities / facility environment
  
• Experience with IEEE/ASHRAE procedures and protocols a plus
  
• Possess basic knowledge of systems design for various projects
  
• Experience using Microsoft Word, Excel, and Microsoft Project
  
• Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction)
  
• Up to 75% travel
  
• Must be a US Citizen
  

• 
  
• Bachelor's / Associates Degree in engineering a plus or comparable experience
  

• 
  
• Occasionally move objects 10-50lbs.
  
• Frequently required to stand, walk, stoop, kneel, crouch or crawl.
  
• Occasionally required to sit and climb or balance.
  
• Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Manage projects, plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects.
  
• The commissioning experts adhere to a thorough quality management/QC process and procedures.
  
• Participate in daily commissioning activity meetings which services include: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation.
  
• Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals.
  
• Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning.
  
• Integrated system testing; Load Bank Testing; Compilation of all testing procedure results.
  
• Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc.
  
• System Assembly; Commission plan preparation; Follow company QC process and procedures.
  
• Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project.
  
• Interface with clients, contractors, equipment vendors and owners' agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc.
  
• Verify results of test reports
  
• Assist with field troubleshooting of commissioned equipment as needed.
  
• Must be US citizen
  
• Must be able to travel approximately 75% of time
  

• 
  
• Bachelor's / Associates Degree in engineering a plus or comparable experience
  
• 3-5 experience in the Engineering Field
  
• A/E experience working in complex facilities or mission critical projects a big plus
  
• Previous Data Center / Mission Critical experience a must
  
• Electrical equipment testing experience in a Critical Facilities / facility environment
  
• Experience with IEEE/ASHRAE procedures and protocols a plus
  
• Possess basic knowledge of systems design for various projects
  

• 
  
• Experience using Microsoft Word, Excel, and Microsoft Project
  

• 
  
• No Certificates or licenses required
  

• 
  
• No supervisory responsibilities with this position
  

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
  

Title: Lead Electrical Commissioning Supervisor

-Start Date ASAP

-Per Diem offered

-Mobilization and Demobilization Package

-Project duration: 8-9 months

-Comprehensive benefits package

Job Description:

Adding three, 250 MW, dual-fuel, simple-cycle Siemens combustion turbines.

Expanding and modifying the existing substation at Cass County Station.

Installing water and fuel-oil storage tanks and converting existing generators to dual-fuel.

Field Supervision

Direct electrical commissioning technicians

Coordinate with construction electricians

Work alongside GE Reps

Coordinate with Commissioning Manager

Coordinate with OPPD (owner) representatives

System Walkdowns

Verify installation is complete and correct

Review drawings against field installation

Identify deficiencies and create punch lists

Ensure redlines are captured

Testing & Energization

Review and execute commissioning test procedures

Oversee:

Megger testing

Relay testing

Functional checks

Loop checks

Breaker testing

Transformer testing

Lead first energization of systems

Safety Leadership

Lead pre-job briefs

Develop energization plans

Ensure lock-out/tag-out (LOTO) compliance

Control electrical hazard boundaries

Enforce arc flash safety protocols

Documentation

Review test reports

Sign off on system turnover packages

Track commissioning schedule progress

Update issue logs and deficiency tracking

Coordination & Communication

Attend daily coordination meetings

Work with mechanical commissioning for system integration

Coordinate with protection engineers

Interface with OPPD for approvals and hold points

Qualifications:

• Must have previous Lead Electrical Commissioning experience
• Must have Simple Cycle turbine commissioning experience
• Immediate Hire
• Must be authorized to work in the US

Job Purpose:

The Lead Electrical Commissioning Supervisor (“LECS”) is generally responsible for planning, coordinating and ensuring safe and orderly progress of the work of Electrical Commissioning Specialists assigned to pre-commissioning, commissioning, testing and initial operations of systems and equipment as are placed under his/her care by the Commissioning Manager (“CM”). LECS will additionally be responsible for performing electrical startup work as necessary to maintain scheduled progress as determined by the CM.

Main Job Function:

• Submit such periodic progress and planning reports as may be required by the CM, ensuring that all documentation, tools, equipment, craft support and other resources necessary to the proper and timely performance of his/her assigned tasks are identified with sufficient advance notice to CM to support the startup schedule.
• Verify that the turnover packages relating to systems under his/her care contain sufficient information enabling the safe and orderly performance of mechanical commissioning work.
• Prepare and submit for the approval of CM detailed commissioning procedures referencing and interpreting the requirements of equipment suppliers, design documents, and governing codes and standards for each system and piece of equipment placed under his/her care.
• Responsible for implementing and enforcing the Lockout-Tag Out (“LOTO”) safety procedures at all times and for each element of systems assigned to his/her care and responsibility.
• Responsible to coordinate and participate in the inspection of construction works as may be assigned by CM.
• Responsible for any other duties assigned to him/her.

Working Conditions:

The duties and responsibilities are generally performed in a plant or support services environment. The position generally involves:

• occasional sitting;
• frequent standing,
• occasional walking;
• moderate to heavy lifting and carrying (50lbs.+);
• frequent kneeling,
• twisting and balancing;
• occasional climbing; frequent reaching;
• frequent pushing/pulling,
• grasping and operation of machinery.
• 80% of the work is outside; 20% inside.

The environmental conditions generally include:

• Frequent exposure to the elements (ie., heat, cold, rain)
• the majority of the work will be outside or in a construction-like atmosphere;
• hazardous conditions.
• The use of protective clothing and/or personal devices is generally required.

• 
  
• Collaborate with engineering, project management, and commissioning teams to gather information and understand project goals and objectives.
  
• Review project plans, technical drawings, and specifications to gain a deep understanding of the systems being commissioned.
  
• Develop and maintain accurate and up-to-date documentation, including commissioning plans, test procedures, checklists, operating manuals, and technical reports.
  
• Communicate effectively with project stakeholders and team members to gather information and address any questions or concerns related to the documentation.
  
• Ensure that all documentation complies with project requirements, industry standards, and regulatory guidelines.
  
• Continuously update and improve existing commissioning documentation based on feedback and lessons learned from previous projects.
  
• Conduct thorough reviews and technical editing of documents to ensure accuracy, clarity, and consistency.
  
• Assist in training sessions to educate project team members and end-users on key project commissioning processes and procedures.
  
• Establish and maintain an efficient document control system to manage project documents, including drawings, specifications, test reports, procedures, and other project-related documentation.
  
• Implement document control procedures and protocols to ensure compliance with internal quality standards, industry regulations, and client requirements.
  
• Organize, label, and maintain electronic document repositories to ensure easy retrieval and accessibility of information.
  
• Collaborate with project teams to ensure that all project-related documentation aligns with company quality standards, procedures, and industry best practices.
  
• Conduct regular quality checks and audits on documents to verify accuracy, consistency, and completeness.
  
• Identify and address any inconsistencies, errors, or discrepancies in documentation and / or reports promptly and proactively.
  
• Liaise with project managers, engineers, and other stakeholders to understand document requirements, project milestones, and updates.
  
• Coordinate with project teams to track and manage the submission, review, and approval of documents according to project schedules.
  

• 
  
• 0-2 years' experience as a Project Administrator, Document Controller, QA/QC Coordinator, or similar role within the construction or engineering industry preferred.
  
• In-depth knowledge of commissioning processes and procedures.
  
• Strong understanding of HVAC systems, electrical systems, plumbing, and other building systems.
  
• Excellent written and verbal communication skills.
  
• Strong organizational skills with attention to detail.
  
• Strong interpersonal skills to collaborate effectively with cross-functional teams and stakeholders.
  
• Familiarity with industry standards, quality management systems, and regulatory requirements.
  
• Must be able to travel up to 30%
  

• 
  
• Bachelor's degree or relevant field preferred.
  

• 
  
• Proficiency in using documentation tools, such as Microsoft Office, Adobe Acrobat, Blue Beam, Smart Sheets, and project management software.
  

• 
  
• Proficiency with various Commissioning Software platforms.
  

• 
  
• Stand or sit for long periods of time.
  
• Work outdoors in summer heat and winter cold.
  
• Be able to walk long distances up to 5 miles a day.
  

• 
  
• A competitive salary
  
• Medical, dental, vision, life, and disability insurance
  
• Paid time off
  
• Tuition reimbursement
  
• 401k Retirement Plan
  
• Military Reserve pay offset
  
• Paid maternity leave
  

EdgeCore Digital Infrastructure serves the world’s largest cloud and internet companies with both ready-for-occupancy and build-to-suit data center campuses that are designed for density. Privately held and backed by committed equity to fund an aggregate amount of over USD $16.5 billion in development, EdgeCore enables hyperscale customer requirements by proactively investing in regions that provide the land and power necessary to support and scale AI and cloud technology. While working thoughtfully with the communities in which we do business, our data center campuses are built at scale to meet key performance specifications, safety metrics and sustainability objectives. EdgeCore has data center campuses in six North American markets with plans to expand into new regions in 2026 and beyond. For more information, please visit .

Career Opportunity

This role is ideal for an experienced commissioning professional who thrives in complex, mission-critical environments. As the Regional Commissioning Manager, you’ll lead commissioning efforts across multiple data center projects in the East Region, ensuring mechanical, electrical, fire life safety, and automation systems meet design specifications and customer requirements. Your support in other markets, including travel, may be required based on business needs. You will collaborate with industry leading engineers, contractors, and clients to improve processes, drive quality, and support sustainable, scalable infrastructure. The ideal candidate will deliver projects on schedule and budget while establishing commissioning standards and fostering high-performance teams.

Key Responsibilities:

• Lead commissioning of large-scale, mission critical data center projects within the region.
• Manage regional commissioning teams, providing guidance, mentorship, and performance oversight.
• Develop, refine, and implement quality and commissioning procedures, policies, and standards.
• Coordinate cross-functional teams including engineering, construction, operations, and IT to resolve technical challenges.
• Oversee site inspections, functional performance tests, and Factory Witness Testing to ensure system readiness.
• Manage client communications, providing updates, milestone tracking, and expectations management.
• Drive continuous improvement by identifying recurring issues and implementing process enhancements.
• Ensure compliance with safety, sustainability, and regulatory requirements.
• Monitor project scope, schedule, and budget to meet delivery objectives.
• Act as the final quality gatekeeper for all commissioned systems prior to operational handover.
• Security is a shared responsibility. All employees are required to comply with company security policies and procedures and to help protect company information, systems, and assets in the course of their daily work.

Your Experience and Qualifications

• At least5 years of commissioning experience, preferably in mission-critical environments (data centers, large-scale infrastructure).
• Minimum 3 years leadership experience in a mission-critical environment preferred
• Strong knowledge of electrical, mechanical, fire life safety, and control systems; familiarity with ASHRAE, NETA, NFPA, and industry standards.
• Experience developing commissioning plans, test scripts, and QA/QC procedures.
• Proven track record to manage multiple projects, budgets, and timelines simultaneously.
• Excellent interpersonal and client-facing skills; ability to translate technical details into clear updates.
• Proven ability to manage client relationships and coordinate multiple stakeholders.
• Travel expected to be approximately 20 - 30% but may increase as the business and volume of work evolves.
• Must pass a pre-employment background check.

What We Offer

• Full-time salaried, exempt role: Includes equity compensation and a performance-based annual bonus.
• Annual base salary range: $170,000 - $200,000, depending on experience.
• In-office expectations: This role requires in-office presence four days per week.
• This role is located in Sterling, Virginia, with free on-site parking.
• Medical, dental, and vision insurance: Includes a $0-premium medical plan option (employee only option).
• Flexible Spending Accounts & Health Spending Account: Health & Dependent Care FSA, Limited-Purpose FSA, and an HSA with a company contribution.
• Paid time off: 120 hours of annual paid time off, 11 paid holidays, 7 sick days, and 8 hours of volunteer time annually.
• Retirement savings: 401(k) retirement savings plan with a company contribution.
• Life and disability insurance: Company-paid life and disability insurance.
• Parental leave: Paid parental leave for eligible new parents, available after meeting service requirements.
• Employee assistance program (EAP): Confidential support services for employees and their families, including counseling, financial guidance, and legal resources.
• Educational assistance: Company-sponsored educational reimbursement for approved courses and certifications.
• Employee support & discounts: Access to company-sponsored discount programs and employee well-being resources.

Commissioning Manager I/II – Data Center

Iowa - Travel packages available for people out of state.

Full-Time | Mission Critical / Data Center Projects

A leading mission-critical construction team is seeking a Commissioning Project Manager to support a major 420+ MW hyperscale data center project in Iowa. This role offers the opportunity to work with cutting-edge technology, collaborate with industry experts, and grow within a fast-paced, innovative environment.

Role Overview

The Commissioning Manager I oversees assigned commissioning scopes, ensuring proper installation, start-up, and full functionality of equipment, systems, and facilities. This position works closely with contractors, project teams, and operations staff throughout the commissioning lifecycle and typically reports to the Senior Commissioning Manager.

Key Responsibilities

• Manage commissioning activities across Levels 1–5, including planning, scheduling, and subcontract coordination
• Lead project meetings and communicate progress, risks, and expectations to stakeholders
• Provide weekly reporting on scope, schedule, and budget performance
• Ensure commissioning processes meet quality standards and client expectations
• Review submittals, designs, drawings, and commissioning documentation
• Develop start-up procedures, functional test scripts, and IST scripts
• Oversee project closeout, including O&M turnover, training, and final documentation
• Collaborate with safety, engineering, quality control, and trade partners to resolve schedule or cost issues
• Troubleshoot installation and operational problems and coordinate resolutions
• Review NETA and thermal imaging test documentation
• Create energization and load banking plans
• Lead Level 3 device testing and support Level 4 testing for EPMS and BMS systems
• Conduct pre-commissioning equipment checks and perform integrated systems testing
• Manage dispute resolution within delegated authority
• Recommend value engineering opportunities
• Mentor team members and support ongoing development

Experience

• Minimum 5 years of construction project management, mechanical, or electrical experience
• At least 3 years in HVAC, fire protection, controls, or electrical testing
• Data center commissioning experience with hyperscale clients preferred
• Demonstrated leadership and mentorship experience
• Familiarity with construction law, business practices, and LEAN principles is beneficial
• OSHA 10 or 30 preferred (or willingness to obtain)

Skills

• Strong leadership and team development abilities
• Excellent problem-solving, analytical, and negotiation skills
• Clear written and verbal communication
• Highly organized with strong attention to detail
• Solid understanding of commissioning practices for electrical and mechanical systems

Technology

• Proficient with Microsoft Office
• Experience with Procore, JDE, Bluebeam, and scheduling software (training provided)

What’s Offered

• Competitive compensation and bonus program
• Comprehensive benefits package (including HSA/FSA options)
• Employer-paid disability and life insurance
• Generous paid time off
• 401(k) with company match
• Tuition reimbursement
• Fully paid parental leave
• Additional voluntary benefits
• Corporate wellness program with incentives

Commissioning Manager (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Commissioning Manager leads the planning, coordination, and execution of commissioning activities for mission-critical data center systems. This role drives readiness, sequence, documentation, and issue closure from late construction through startup, functional testing, integrated systems testing (IST), and turnover to Operations.

You’ll partner closely with the owner/client team, GC, trade partners, vendors, and the Commissioning Agent (CxA) to ensure systems are installed correctly, started safely, tested thoroughly, documented completely, and turned over in a predictable, operations-ready manner.

Typical Project Types

• Ground-up hyperscale and enterprise data center builds
• Brownfield upgrades and retrofits in operating facilities
• Campus expansions and phased turnovers
• Fit-outs and accelerated customer deployment work

Key Responsibilities

Commissioning Planning & Execution (Primary)

• Build and manage the commissioning execution plan aligned to the master schedule and turnover strategy.
• Lead readiness planning for startup, functional testing, and IST, ensuring prerequisites and sequence are understood and met.
• Coordinate vendor participation (UPS, switchgear, generators, BAS/BMS, chillers, CRAHs, etc.) and manage field execution windows.

Readiness, Prerequisites & Constraint Removal (Primary)

• Maintain and drive closure of readiness checklists: construction completion, labeling, point-to-point, LOTO boundaries, access, housekeeping, temporary conditions, and documentation.
• Track constraints daily/weekly; escalate blockers early with clear impacts and recovery options.

Testing, Documentation & Issue Management (Primary)

• Own the commissioning issue/deficiency process: log, triage, assign, verify fixes, and close out.
• Ensure test documentation is complete and organized (prefunctional checklists, functional tests, trend logs, IR scans where applicable, TAB reports, flushing/cleanliness records, etc.).
• Support the CxA in maintaining testing standards, witness plans, and results traceability.

Coordination & Stakeholder Management (Primary)

• Facilitate commissioning-focused meetings and coordinate across CSA/MEP teams to protect testing windows.
• Communicate clearly with the owner/client team and GC leadership on progress, risks, and weekly priorities.

Turnover to Operations (Primary)

• Coordinate turnover packages by system/area/phase: as-builts, O&Ms, training plans, warranties, spares, and final acceptance documentation.
• Drive punch and closeout closure to meet “ops-ready” standards—not just “construction complete.”

Safety & Controls (Supporting/Primary as Needed)

• Enforce safe testing practices including LOTO planning, energization coordination, and access controls during commissioning activities.

Knowledge, Skills & Abilities

• Strong understanding of mission-critical MEP systems and the commissioning flow (prefunctional → functional → IST → turnover).
• Proven ability to lead cross-functional teams under schedule pressure with high documentation rigor.
• Strong troubleshooting mindset and ownership of issue closure.
• Excellent communication and stakeholder management skills.
• Familiarity with field technology and documentation platforms (Procore/ACC, Bluebeam, MS Office; commissioning tools a plus).
• Working understanding of CPM logic, milestone management, and short-interval planning.

Experience & Education (Typical)

• 7+ years of mission-critical construction/MEP leadership, commissioning leadership, or similar (data center experience strongly preferred).
• OSHA 30 preferred (or willingness to obtain).
• NFPA 70E awareness/training is a strong plus for energization environments.

• 
  
• Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents
  
• Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes
  
• Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials
  
• Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes
  
• Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems
  
• Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule
  
• Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance
  
• Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements
  
• Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes
  
• Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project
  
• Liaise the Technical Engineer for submission of material submittals to Consultant
  
• Develop and maintain inspection reports
  
• Ensure compliance to federal and state laws, as well as company standards and specifications
  
• Maintain calibration of quality testing equipment
  
• Perform inspections across all stages of production
  
• Advising on procedures to improve production efficiency
  
• Prepare and maintain test data for review
  
• Evaluate data and draft reports, noting any relevant deviations from existing standards
  
• Identify areas for quality control improvement and implement new methods accordingly
  
• Communicate quality or compliance concerns with urgency
  

• 
  
• Technical Military MOS, trade school and/or degree
  
• Experience and/or education and internship in complex facilities or mission critical projects is preferred
  
• Any civilian or military technical certifications is a plus
  
• Experience with writing and enforcing standard operating procedures (SOPs)
  
• Solid understanding of test equipment & software
  
• Minimum of 2-4 years of inspection and/or production experience
  
• Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions
  
• Demonstrated ability to work independently with minimal supervision
  
• Excellent organizational skills
  
• Demonstrated ability to analyze and interpret information
  
• Must be a US Citizen
  
• Must be willing to travel 75%
  

• 
  
• Advanced Excel skills preferred
  
• Experience using Microsoft Office Suite, Word and Microsoft Project
  
• Basic knowledge of systems design for various projects
  

• 
  
• No certificates or licenses required
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high.