Bioconductor Install Specific Version Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services.

Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential.

QA Engineer

General Description: Responsible for testing Android applications to ensure quality, performance, and usability. Executes manual and automated tests, identifies defects, and works with developers to resolve issues across devices and OS versions.

- Starting compensation is based on experience.

- No H1 Sponsorship.

- Must Already be in Chicago, IL or willing to relocate at own cost

Primary Responsibilities/Tasks:

• Conduct Google compliance testing to ensure adherence to Google Play policies, Android compatibility requirements, and certification standards.
• Identify, document, and track defects using defect management tools; verify fixes and ensure proper resolution.
• Collaborate with developers, product managers, and cross-functional teams to clarify requirements and test scenarios.
• Support lab testing environments, including device setup, configuration, and maintenance.
• Ensure compliance with internal quality standards and lab conformance requirements.
• Provide customer-facing lab support, including issue replication, troubleshooting, and validation.
  
  

Work Experience Requirements:

• 1+ years of experience in Android mobile application testing.
• Strong understanding of Android OS architecture, device fragmentation, and app lifecycle.
• Experience with automation tools (e.g., Appium, Espresso).
• Experience with ADB, Logcat, and debugging tools.
• Knowledge of Agile/Scrum methodologies.
• Strong analytical, troubleshooting, and communication skills
• Experience in testing Android applications to ensure quality, performance, and usability. Executes manual and automated tests, identifies defects, and works with developers to resolve issues across devices and OS versions: 1+ years (Preferred)

Education Requirements: Bachelor of Science in related engineering major (EE, CE, etc.)

The Ideal Candidate. At ArcLight Wireless, our strength comes from a diverse group of talented, creative, and ambitious professionals. An exceptional candidate will possess experience in testing Android applications to ensure quality, performance, and usability. Executes manual and automated tests, identifies defects, and works with developers to resolve issues across devices and OS versions.

Ability to commute/relocate:

• Chicago, IL: Reliably commute or planning to relocate before starting work (Required)

Applicants have rights under Federal Employment Laws:

Type: Full-time

Benefits:

• 401(k)
• Health insurance
• Paid time off
  
  

Compensation

The expected salary range for this position is $48,000-$52,000 per year. This range represents the minimum and maximum base salary we reasonably expect to pay for this role. Actual compensation within the range will depend on skills, experience, and qualifications.

Our Benefits

We care about your total well-being and will support you with the following, subject to your location and role.

• Health: Medical, dental and vision insurance, life insurance, employee assistance programs.
• Wealth: In addition to base pay, we offer 401(k) with company match (immediate vesting upon enrollment).
• Happiness:
  • Professional Growth: Online training courses, virtual and classroom development experiences, tuition reimbursement program
  • Work-Life Balance: Paid-time off and family leave

In compliance with applicable state and local pay transparency laws, we provide clear and equitable compensation information for all applicants.

Position anticipated to close May 4, 2026.

Additional information

SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.

This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company’s rights to assign or reassign duties and responsibilities to this job at any time.

If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call 2 for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Overview:

For more than 40 years, Sunrise Landscape, a commercial landscape maintenance, design, and installation company, has been serving Florida with a commitment to service excellence. They have an opportunity for an experienced multi-market landscape leader to join the team. Although the role will direct the landscape construction and installation sectors of the business across the Tampa and Ft. Myers markets, we are seeking someone with experience in either maintenance or installation. This role has full accountability for project execution, financial performance, safety, and growth of the installation division, including complex commercial and residential landscape construction projects.

In this role, you will oversee all aspects of the installation lifecycle—from pre-construction planning and estimating through project execution, close-out, and warranty—while ensuring projects are delivered on time, on budget, and to design and quality standards. This position plays a critical role in driving profitable growth, professionalizing construction operations, and scaling the installation business organically and through acquisitions.

The ideal candidate is an experienced landscape leader with broad landscape knowledge as well as excellent business acumen and team leadership skills.

Key Responsibilities:

Financial & Business Performance

• Own and deliver installation division financial results, including revenue growth, gross margin, project profitability, and cash flow.
• Maintain full P&L responsibility for the Tampa and Ft. Myers installation operations.
• Establish annual budgets, forecasts, and production plans aligned with company goals.
• Analyze project financials, job cost reports, and margin performance to identify risks and improvement opportunities.
• Ensure accurate estimating, cost tracking, change order management, and billing processes.

Project & Construction Management

• Oversee all landscape installation and construction projects from pre-construction through completion.
• Ensure project plans, schedules, and scopes are clearly defined, resourced, and executed.
• Review and approve project schedules, work plans, and sequencing to ensure efficiency and quality.
• Manage project risk, change orders, and issue resolution to protect margin and client satisfaction.
• Ensure projects are completed on time, within budget, and in accordance with approved designs and specifications.

Operations & Resource Management

• Lead daily installation operations, including crew deployment, equipment utilization, and subcontractor coordination.
• Optimize labor productivity, equipment usage, and material procurement.
• Oversee fleet, tools, and asset management to support construction activities.
• Develop standardized construction processes and best practices across markets.

People Leadership

• Lead, develop, and retain high-performing construction leaders, including Project Managers, Superintendents, Foremen, and field crews.
• Train skilled installation and construction professionals.
• Establish clear performance expectations and accountability for project delivery.
• Coach leaders on project management, financial discipline, safety, and people leadership.
• Build bench strength and succession plans for critical construction roles.

Safety, Quality & Compliance

• Champion a safety-first culture across all installation projects.
• Ensure compliance with OSHA, local, state, and federal safety regulations.
• Enforce quality standards, workmanship expectations, and inspection protocols.
• Proactively identify and mitigate project, operational, and safety risks.

Client & Stakeholder Management

• Serve as senior point of escalation for clients, developers, general contractors, and partners.
• Participate in key client meetings, project reviews, and issue resolution.
• Build long-term relationships with clients, designers, and trade partners.
• Ensure a professional, responsive, and solutions-oriented client experience.

Required Skills and Qualifications:

• 10–15 years of progressive leadership experience in landscape installation/construction or with deep landscape maintenance backgrounds.
• Bachelor’s degree in Construction Management, Landscape Architecture, Engineering, or a related field required.
• Proven experience managing complex, project-based operations with full P&L accountability.
• Deep understanding of landscape construction, project planning, scheduling, and job cost management.
• Demonstrated ability to interpret landscape designs, construction drawings, and specifications.
• Strong financial acumen, including estimating, budgeting, cost control, and margin management.
• Proven experience leading, developing, and holding landscape teams accountable.
• Excellent communication and stakeholder management skills.
• High degree of professionalism, discretion, and sound judgment.
• Experience with construction/project management software and financial systems.
• Experience operating across multiple locations or markets preferred.

Responsibilities Include:

Responsible for safety performance of job assignments and maintain good housekeeping.

Work from complicated drawings, specifications and sketches and can completely follow through on job assignments.

Install, operate test, calibrate, maintain, and repair various types of measurement and control instruments, electronic, mechanical, or pneumatic, either manual or automatic. These instruments record, indicate or control, heating value, humidity or dew point, specific gravity, temperature, combustible mixtures, flow, height, odorant, volume, liquid level, speed, weight, and time. Also included are analyzers (chemical, mechanical and electronic), telematics or remote transmission, alarms and safety devices, clocks, and regulators. Installs wells, tubing, and thermocouples.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, metering stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary test and instrument maintenance on such installations.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, meeting stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary tests and instrument maintenance on such installations.

Remove and install values/regulations4 inches and under.

Paint and install simple support for instruments and electrical equipment.

Installs simple supports and equipment.

Must possess the ability to perform all duties of a Technician and a Junior Technician.

Carry and operate radio when necessary.

Must be able to identify material needed to complete jobs as well as remove it from the storeroom.

Directly assist in the development of lower graded classification as required.

Directs lower graded classification as required.

Understand the hazards of natural gas/LNG and is experienced working on natural gas/LNG applications.

Must understand cryogenic applications.

Must make reports for all repairs, tests inspections, and calibrations of instruments.

Must qualify as an operator of plant vehicles such as trucks (dump, flat, pick-up, forklift, bobcat and loader, etc.).

Clean and prepare surface (steel, wood, etc.) for painting by washing, scrubbing, wire brushing, scrapping, and chipping. Apply primer and finish coating.

Clean equipment, check oil, gas and water levels. Reports and defective parts that may need repairs on plant vehicles.

May have the ability to operate all mill workshop tools, band saw, chop box, table saw etc.

Must be able to assist in opening and closing hand valves.

Craft Specialty Work

Service and repair DCS equipment.

Calibrate and troubleshoot instruments loops.

Service analyzer and recording instruments.

Check and maintain combustible gas indicators.

Check and maintain plant odorization system

Maintain water and CO2 analyzers.

Install, set up and calibrate new devices.

Set-up, program and install plant transmitter as needed or required.

Maintain M&R station valves and regulations.

Operate various test equipment and plant system.

Check and maintain Scott freedom oxygen detectors plant wide.

Install, set-up and program Moore site-programmable volt and milliamp limit trip alarms.

Set-up and install chart recorders.

Maintain Sensit Gold Gas Detector, calibrate and repair.

Maintain manual loading stations.

Install and maintain Hazardous Detection System components.

Install, program and set-up smart process control instrumentation.

Note: Only those trained or certified in the following craft specialties may perform these tasks.

General:

Safety is the responsibility of everyone.

Safe driving is the responsibility of everyone.

Future technological advancements in computing monitoring, and date recording do not change essential functions of the job description unless the technological advancements are deemed substantial and increase the workload.

Must maintain current TWIC {Transportation Worker Identification Credential).

Must be current with OQ (Operator Qualification) to perform job duties and remain in compliance.

Able to work in inclement weather and general gas plant conditions.

Must be able to work in confined spaces when required.

Must be able to climb ladders/stairs and work at extreme heights when required.

Must be able to don/doff a full-face respirator when required.

Must be always clean shaven (PGW Respirator Readiness policy 007-10).

Must wear PPE (FR clothing, steel/composite toe work boots - no sneaker type, hard hat, safety glasses etc.-when required.

Must possess high reach, forklift, rigging and signaling training etc.

Must be knowledgeable of the Plant’s Emergency Alarm System.

Must be able to work extended hours and shifts if conditions are required.

Qualifications:

High School Diploma/GED required.

Must possess and maintain a valid driver's license.

Must acquire and maintain a CDL License.

Certified Control Technician by the International Society of Automation {ISA) or similar preferred.

Promotion to this position requires demonstrated ability to perform the job functions. Must pass a written test and (Hands on Test).

This is a drug testing position.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Are you an experienced boiler installation professional looking to take the next step in your career? Chapman Bros. is seeking a highly skilled Lead Boiler Installer Technician to join our growing team in Cranford, NJ. With more than 50 years of delivering top-quality heating services to residential customers, Chapman Bros. has built a reputation for excellence, professionalism, and customer-focused service.

As a Lead Boiler Installer, you will bring your 10+ years of expertise to oversee, install, and commission boiler systems with precision and leadership. If you're ready to elevate your career with a company that values craftsmanship, teamwork, and continued growth, we'd love to hear from you!

• Install, replace, and commission residential boiler systems, including steam, hot water, and high-efficiency units
• Configure and optimize hydronic heating systems, including piping, pumps, zone controls, and venting
• Perform system start-up, testing, and calibration to ensure safe and efficient operation

• Serve as the lead technician on installation projects, directing team members and coordinating onsite workflow
• Train junior installers on proper techniques, safety procedures, and installation standards

• Diagnose and resolve issues related to boilers, burners, controls, and overall system performance
• Identify potential installation complications and recommend effective solutions

• Clearly explain boiler replacement or installation processes to homeowners
• Provide system operation guidance and ensure customer satisfaction upon project completion

• Use ServiceTitan (or similar software) to document installation details, track materials, and update job status
• Maintain accurate and organized records in compliance with company and regulatory standards

• Ensure all installations meet local, state, and national mechanical and building codes
• Adhere to strict safety protocols for equipment handling, combustion safety, and jobsite practices

• Provide expert recommendations on boiler types, efficiency options, and system upgrades
• Stay informed on emerging technology, energy-efficient equipment, and industry best practices

• 10 years of experience installing and commissioning HVAC/boiler systems
• Strong working knowledge of hydronic systems, steam systems, venting, circulators, controls, and piping
• Experience leading installation teams or serving in a senior installer role
• Ability to read and interpret blueprints, schematics, and manufacturer specifications
• Licensing: Valid HVAC or related license in the state of New Jersey preferred
• EPA Certification: EPA Type II or Universal Certification required
• Gas piping certification or equivalent experience strongly preferred
• Experience with ServiceTitan or similar service-management software is a plus

Other Requirements

• Excellent communication and customer-service skills
• Strong problem-solving ability and attention to detail
• Leadership mindset with the ability to mentor and support team members
• Professional, reliable, and safety-focused
• Valid driver's license with a clean driving record
• Ability to lift 50+ lbs and work in attics, basements, crawlspaces, and other residential environments

Join our team at Chapman Bros. and become part of a company that values both its customers and employees. Apply today to start your career with a leading home services provider and be part of the Apex Service Partners network!

Chapman Bros. may conduct a pre-employment background check and drug test, subject to applicable laws.

Chapman Bros. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Job Info

Position: Finish Carpenter

Travel: required throughout PA and MD

Pay: $24.00/hr- $31.00/hr (Based on experience)

We are currently looking for Finish Carpenters to join our Wagman Construction Group across PA and MD projects. Work is performed outdoors year-round. Employees will be exposed to wet, muddy, cold, hot and humid weather conditions. This individual must have the ability to communicate and work well with others.

A finish carpenter is a skilled tradesperson who constructs, repairs, and installs structures and fixtures made of wood and other materials. They work on a variety of projects, from building frameworks and installing components like doors and windows, to creating custom cabinetry and performing repairs. Carpenters utilize both hand and power tools and often work from blueprints and specifications to ensure accurate and safe construction. Brief Paragraph describing the position.

This is a safety sensitive position requiring work on construction sites with various safety hazards inherent in heavy construction.

This position is subject to drug testing and compliance policies associated with our status as a Federal Contractor.

As a full-service general contractor, Wagman Construction facilitates growth and development in senor living, healthcare, higher education, urban, institutional and industrial markets in central Pennsylvania, Virginia and Maryland.

Responsibilities:

• Layout and install casework, cabinets, countertops, and backsplashes. Must be able to scribe countertops and filler panels to adjoining surfaces.
• Install hollow metal frames, doors, windows, and all hardware.
• Install rehung doors and hardware.
• Install running tri including crown, base, casing, chair rail, shoe molding, windowsills, and aprons.
• Install deck and stair railing systems.
• Hang and finish drywall.
• Install residential flooring including LVT, sheet vinyl, carpet tile, and wood (excluding rolled carpet).
• Install ceramic floor and wall tile.
• Install suspended ceiling grid and acoustical ceiling tile.
• Paint walls, trim, doors, and all other surfaces
• Install wire shelving, toilet accessories, white boards, signage, ADA handrails, wall protection, and other miscellaneous specialties.
• Install residential appliances including water and electrical hookups (no gas connections).

Physical Requirements:

• Must be able to lift up to 60 pounds from ground level to waist level and 30 pounds to above shoulder level throughout work shift
• Continuous standing and walking required throughout a scheduled work shift
• Must be able to climb ladders
• Must be able to bend, squat, kneel and crawl
• Must be able to perform simple grasping and fine manipulation tasks with both hands
• Must have the ability to reach, lift and perform work above shoulder height - and the ability to work on uneven surfaces and in confined spaces
• Required to have acceptable corrected vision (in both eyes) and acceptable corrected hearing
• Must be able to work outdoors in wet, muddy, cold, hot and humid weather

Job Benefits:

Wagman wants to keep employees and their families happy and healthy and offers a comprehensive benefits package to all full-time employees that includes:

• Medical/Vision/Dental Insurance
• Flexible Spending Accounts for Healthcare and Dependent Care
• Disability and Life Insurance
• Wellness Programs that include Orthopedic Care
• 401(k) Retirement Plan with Company Matching Contribution
• Tuition Reimbursement
• Employee Assistance Program
• Adoption Assistance
• 8 paid holidays
• Paid Time Off

Our Values

Wagman’s Core Values of integrity, mutual respect, safety, innovation, sense of urgency, and community are an integral part of every decision and every plan made at Wagman and these values have laid the foundation for our success and longevity for our past, present, and future.

Consistently being recognized with national and regional awards for projects, safety and community is a testament of our commitment to these values. Beyond the buildings and bridges which connect and improve our communities, Wagman has community engagement programs and initiatives which help to build better, for our people.

Wagman Culture

Wagman is committed to cultivating a workforce and preserving a culture built on our core values. Our people are our most valuable assets. We value the diverse identities, experiences, perspectives, backgrounds capabilities and talents that our people bring to Wagman.

From hiring to training, development, and promotions to special events, Wagman is committed to providing equal and equitable opportunities and rewarding experiences. As a family business providing a safe and healthy work environment in accordance with our mission, we foster diverse and inclusive work experiences and a sense of belonging.

Wagman is an affirmative action and equal opportunity employer. We recognize and value our diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Wagman is proud to be an EEO/AA employer M/F/D/V.