Binary Defense Jobs in Usa
2,038 positions found — Page 11
B
Electro-Mechanical Assembler
Salary not disclosed
Electro-Mechanical Assembler Location: Orlando, FL Job ID: #72251 Pay Range: $20-24 ph (W2) Duration: 6 mos We are seeking an experienced electromechanical assembler capable of performing IPC compliant crimping, soldering, hardware installation (screws, bolts, nuts) and routing wires of all gauges on a variety of electromechanical sub assemblies.
The role requires reading and interpreting engineering drawings, schematics, and detailed work instructions to create initial layouts, operate hand and power tools, jigs, saws, and torque equipment, and conduct continuity checks on work?in?process and finished parts.
Candidates must have 3+ years of hands-on experience (aerospace, defense, industrial, or automotive).
Duties include repetitive and non repetitive production tasks, online quality inspections per specifications, and the ability to disassemble, modify, rework, and/or reassemble assemblies in development.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
The role requires reading and interpreting engineering drawings, schematics, and detailed work instructions to create initial layouts, operate hand and power tools, jigs, saws, and torque equipment, and conduct continuity checks on work?in?process and finished parts.
Candidates must have 3+ years of hands-on experience (aerospace, defense, industrial, or automotive).
Duties include repetitive and non repetitive production tasks, online quality inspections per specifications, and the ability to disassemble, modify, rework, and/or reassemble assemblies in development.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
B
Assembly / Manufacturing Technician - 2nd Shift
🏢 Butler Aerospace and Defense
Salary not disclosed
Assembly / Manufacturing Technician
- 2nd Shift Location: West Des Moines, IA 50265 Job ID: #72227 Pay Range: $16-20 Shift: 1st shift, M
- F 7:00am
- 3:30pm, some mandatory & voluntary over time on SATs ON-SITE work only Open to US Citizens & US Permanent Residents Entry-Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing doing Assembly, Machine Operations, Inspection or Calibration THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Entrylevel will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
Manufacturing Technician (ONSITE): Operates production equipment.
Constructs, maintains, and test mechanical systems and components/assemblies.
Candidate would have manufacturing and/ or small hand tools experience preferably.
Job Details:
* Follows blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met.
* Performs troubleshooting, calibrations or modifications of hardware, fixtures and software.
* Uses measuring and diagnostic tools to test and modify systems and components/assemblies.
* Maintains records of production and reports any issues while following standard procedures.
* Interprets data and accurately records time changes, test data, parts usage, etc.
* Uses mechanical or Optical equipment, including computers use and lasers use.
* Provides technical solutions to engineering.
* Ensures systems and components/assemblies meet established specifications.
* Reworks and repairs various mechanical and electromechanical systems and components/assemblies as needed.
* May assist engineering with the design of components and prototypes.
* May train and mentor new technicians.
* Exhibits Company's Leadership Behaviors and Values.
* Supports and follows all rules/guidelines/standards set by EHS, Quality and CI functions as set by assigned leader and position.
* Perform other duties as assigned including working extended shifts/overtime as required by the business.
* May be trained/certified in multiple skills.
* Entry Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
* US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices.
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
- 2nd Shift Location: West Des Moines, IA 50265 Job ID: #72227 Pay Range: $16-20 Shift: 1st shift, M
- F 7:00am
- 3:30pm, some mandatory & voluntary over time on SATs ON-SITE work only Open to US Citizens & US Permanent Residents Entry-Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing doing Assembly, Machine Operations, Inspection or Calibration THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Entrylevel will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
Manufacturing Technician (ONSITE): Operates production equipment.
Constructs, maintains, and test mechanical systems and components/assemblies.
Candidate would have manufacturing and/ or small hand tools experience preferably.
Job Details:
* Follows blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met.
* Performs troubleshooting, calibrations or modifications of hardware, fixtures and software.
* Uses measuring and diagnostic tools to test and modify systems and components/assemblies.
* Maintains records of production and reports any issues while following standard procedures.
* Interprets data and accurately records time changes, test data, parts usage, etc.
* Uses mechanical or Optical equipment, including computers use and lasers use.
* Provides technical solutions to engineering.
* Ensures systems and components/assemblies meet established specifications.
* Reworks and repairs various mechanical and electromechanical systems and components/assemblies as needed.
* May assist engineering with the design of components and prototypes.
* May train and mentor new technicians.
* Exhibits Company's Leadership Behaviors and Values.
* Supports and follows all rules/guidelines/standards set by EHS, Quality and CI functions as set by assigned leader and position.
* Perform other duties as assigned including working extended shifts/overtime as required by the business.
* May be trained/certified in multiple skills.
* Entry Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
* US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices.
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
Not Specified
B
Maintenance Writer
🏢 Butler Aerospace and Defense
Salary not disclosed
Maintenance Writer Location: Remote Job ID: #72279 Pay Range: $35-45 The deadline to apply is 04/10/2026 Citizenship Requirement: U.S.
Person with the ability to work in the U.S.
(No foreign nationals) Security Clearance Level: Clearance Required (Basic Sikorsky clearance) Min years of experience: See job description in next section Summary/Objective Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring maintenance publications.
This position is in support of contracted technical publication revision services and the creation of new publications.
This is a remote work position.
Areas of Responsibility/Essential Functions
* Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft maintenance publications.
* Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft maintenance publications
* Research, writing, and development of portions of aircraft maintenance publications according to the governing specification and published standard work
* Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
* Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature.
Judgment required compiling and selecting technical data for text and illustrations
* Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of aircraft maintenance publications
* Provide frequent status to supervision
* Meet established internal and external delivery milestones
* Interface with engineers over the content and review of the publications when required
* Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.
Competencies Technical Skills, Knowledge, and Abilities
* Ability to write maintenance procedures from engineering drawings, specifications, performance data, or other similar literature
* Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
* Ability to read and interpret assembly/installation blueprints, technical publications, vendor data, and various forms of engineering data
* Ability to read and interpret military and commercial specification and standards
* Strong analytical and complex problem-solving skills
* Ability to self-edit written and graphical work
* Proficient with desktop publishing using content management software
* Proficient with SGML/XML structured document authoring such as Arbor Text or equivalent
* Proficient with various research (i.e., customer-specific) applications for technical issues
* Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
* Required:
- Sikorsky Aircraft technical publications experience
- S1000D experience
- Experience with Contenta content management software and XyVision publishing software Interpersonal and Communication Skills
* Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
* Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
* Ability to work collaboratively with others
* Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
* Ability to demonstrate initiative and be self-motivated
* Organizational skills
* Time management skills
* Detail orientation
* Task and goal-orientation
* Quality-driven
* Responsive and time-sensitive to customer's delivery schedule
* Strong, customer-focused work ethic and positive attitude
* Ability to mentor less experienced and knowledgeable writers on the team Work Experience Minimum 3 years technical writing experience Required Education
* Requires knowledge of technical publications writing.
Must have understanding of engineering specifications drawings, designs, and English composition.
* Associate or Bachelor's degree, or equivalent trade experience Supervisory Responsibility This position has no supervisory responsibilities.
Work Authorization/Security Clearance
* Work authorization: Must be a U.S.
person with the ability to work in the U.S.
* Security clearance: Required for some assignments at Top Secret level Work Environment
* This is a remote work position.
* This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.
Travel Limited travel maybe required to support validations.
Position Type/Expected Hours of Work
- This is a full-time Exempt position requiring a 40-hour work week.
- Occasional overtime and possible weekend work are also required to meet customers' needs.
- Work schedules must be approved by supervision.
The employee must be working during the six "core" work hours of 9:00 a.m.
to 3:00 p.m.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Person with the ability to work in the U.S.
(No foreign nationals) Security Clearance Level: Clearance Required (Basic Sikorsky clearance) Min years of experience: See job description in next section Summary/Objective Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring maintenance publications.
This position is in support of contracted technical publication revision services and the creation of new publications.
This is a remote work position.
Areas of Responsibility/Essential Functions
* Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft maintenance publications.
* Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft maintenance publications
* Research, writing, and development of portions of aircraft maintenance publications according to the governing specification and published standard work
* Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
* Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature.
Judgment required compiling and selecting technical data for text and illustrations
* Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of aircraft maintenance publications
* Provide frequent status to supervision
* Meet established internal and external delivery milestones
* Interface with engineers over the content and review of the publications when required
* Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.
Competencies Technical Skills, Knowledge, and Abilities
* Ability to write maintenance procedures from engineering drawings, specifications, performance data, or other similar literature
* Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
* Ability to read and interpret assembly/installation blueprints, technical publications, vendor data, and various forms of engineering data
* Ability to read and interpret military and commercial specification and standards
* Strong analytical and complex problem-solving skills
* Ability to self-edit written and graphical work
* Proficient with desktop publishing using content management software
* Proficient with SGML/XML structured document authoring such as Arbor Text or equivalent
* Proficient with various research (i.e., customer-specific) applications for technical issues
* Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
* Required:
- Sikorsky Aircraft technical publications experience
- S1000D experience
- Experience with Contenta content management software and XyVision publishing software Interpersonal and Communication Skills
* Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
* Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
* Ability to work collaboratively with others
* Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
* Ability to demonstrate initiative and be self-motivated
* Organizational skills
* Time management skills
* Detail orientation
* Task and goal-orientation
* Quality-driven
* Responsive and time-sensitive to customer's delivery schedule
* Strong, customer-focused work ethic and positive attitude
* Ability to mentor less experienced and knowledgeable writers on the team Work Experience Minimum 3 years technical writing experience Required Education
* Requires knowledge of technical publications writing.
Must have understanding of engineering specifications drawings, designs, and English composition.
* Associate or Bachelor's degree, or equivalent trade experience Supervisory Responsibility This position has no supervisory responsibilities.
Work Authorization/Security Clearance
* Work authorization: Must be a U.S.
person with the ability to work in the U.S.
* Security clearance: Required for some assignments at Top Secret level Work Environment
* This is a remote work position.
* This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.
Travel Limited travel maybe required to support validations.
Position Type/Expected Hours of Work
- This is a full-time Exempt position requiring a 40-hour work week.
- Occasional overtime and possible weekend work are also required to meet customers' needs.
- Work schedules must be approved by supervision.
The employee must be working during the six "core" work hours of 9:00 a.m.
to 3:00 p.m.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
B
Inspector, 1st Shift (manufacturing)
🏢 Butler Aerospace and Defense
Salary not disclosed
Inspector, 1st Shift (manufacturing) Location: West Des Moines, IA (50265) Job ID: #72244 Pay Range: $17-19 Shift: 1st shift, M
- F 7:00am
- 3:30pm, some mandatory & voluntary over time on SATs ON-SITE work only Open to US Citizens & US Permanent Residents Preferring Some previous Inspection experience in a manufacturing or production environment THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Inspects product incoming from suppliers, in-process, or final inspection for conformity to ensure the quality and integrity of the material and assemblies are produced to meet drawing specifications, tolerances, corporate procedures and customer requirements.
Assist quality engineer(s) in source inspection of produce.
Assist quality engineer(s) in the creation and maintenance of quality system.
May act as an FAA delegate.
Essential Responsibilities: o May coordinate and manage shipment of final product
- being shipped out from the plant.
o Prepare to inspect by interpreting blueprints, data, and manuals to determine specifications, inspections and testing procedures.
o Review paperwork to ensure completion and accuracy of all documents including routers, flow card, First Articles, etc.
o Inspect product to verify conformance to specification of the parts by measuring dimensions using instruments such as gages, calipers, comparators micrometers, etc.
o Work with Quality Engineers to approve source files and ensure that they are current as well as, assist in identifying required changes and updates, Assist Quality Engineers in training of additional source inspectors.
Assist quality Engineers in conducting customer FAIR's in addition to assisting with corrective actions.
o Oversee customer requirements audit system.
o Develop and conduct IOS book and gage kit audits.
o Coordinate and conduct training on gage use, gage calibrations and gage system software.
o Assist in the training of new inspectors by coordination and conducting training of inspections on IOS book requirements, gage kit development, and annual gage reviews.
o Works under direct supervision.
Normally follows established procedures on routine work.
Requires instructions on new assignments.
o Applies basic job skills and company policies and procedures to complete assigned tasks.
o Tasks are semi-routine in nature, but recognizes the need for some judgment o Perform visual inspection on parts utilizing IOS books and PowerPoint slides (Source files) associated with the part to ensure produce conformance.
o Support and follow all rules/guidelines/standards set by EHS, Quality, and CI functions as set by your leader and position.
o Over 40 hours per week as scheduled to meet business needs.
o All other duties as assigned including working extended shifts/overtime as required by the business.
o Willingness to work nonstandard hours o Some Holiday hours may be required based on business need o Working extended shifts/overtime as required by the business US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
- F 7:00am
- 3:30pm, some mandatory & voluntary over time on SATs ON-SITE work only Open to US Citizens & US Permanent Residents Preferring Some previous Inspection experience in a manufacturing or production environment THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Inspects product incoming from suppliers, in-process, or final inspection for conformity to ensure the quality and integrity of the material and assemblies are produced to meet drawing specifications, tolerances, corporate procedures and customer requirements.
Assist quality engineer(s) in source inspection of produce.
Assist quality engineer(s) in the creation and maintenance of quality system.
May act as an FAA delegate.
Essential Responsibilities: o May coordinate and manage shipment of final product
- being shipped out from the plant.
o Prepare to inspect by interpreting blueprints, data, and manuals to determine specifications, inspections and testing procedures.
o Review paperwork to ensure completion and accuracy of all documents including routers, flow card, First Articles, etc.
o Inspect product to verify conformance to specification of the parts by measuring dimensions using instruments such as gages, calipers, comparators micrometers, etc.
o Work with Quality Engineers to approve source files and ensure that they are current as well as, assist in identifying required changes and updates, Assist Quality Engineers in training of additional source inspectors.
Assist quality Engineers in conducting customer FAIR's in addition to assisting with corrective actions.
o Oversee customer requirements audit system.
o Develop and conduct IOS book and gage kit audits.
o Coordinate and conduct training on gage use, gage calibrations and gage system software.
o Assist in the training of new inspectors by coordination and conducting training of inspections on IOS book requirements, gage kit development, and annual gage reviews.
o Works under direct supervision.
Normally follows established procedures on routine work.
Requires instructions on new assignments.
o Applies basic job skills and company policies and procedures to complete assigned tasks.
o Tasks are semi-routine in nature, but recognizes the need for some judgment o Perform visual inspection on parts utilizing IOS books and PowerPoint slides (Source files) associated with the part to ensure produce conformance.
o Support and follow all rules/guidelines/standards set by EHS, Quality, and CI functions as set by your leader and position.
o Over 40 hours per week as scheduled to meet business needs.
o All other duties as assigned including working extended shifts/overtime as required by the business.
o Willingness to work nonstandard hours o Some Holiday hours may be required based on business need o Working extended shifts/overtime as required by the business US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
B
Technical Writer
✦ New 🏢 Butler Aerospace and Defense
Salary not disclosed
Technical Writer Location: Remote Job ID: #72278 Pay Range: $35-45
- Depends on experience and education The deadline to apply is 04/10/2026 Citizenship Requirement: U.S.
Person with the ability to work in the U.S.
Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring maintenance publications.
This position is in support of contracted technical publication revision services and the creation of new publications.
This is a remote work position.
Areas of Responsibility/Essential Functions:
* Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft maintenance publications.
* Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft maintenance publications
* Research, writing, and development of portions of aircraft maintenance publications according to the governing specification and published standard work
* Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
* Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature.
Judgment required compiling and selecting technical data for text and illustrations
* Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of aircraft maintenance publications
* Provide frequent status to supervision
* Meet established internal and external delivery milestones
* Interface with engineers over the content and review of the publications when required
* Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.
Competencies -Technical Skills, Knowledge, and Abilities
* Ability to write maintenance procedures from engineering drawings, specifications, performance data, or other similar literature
* Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
* Ability to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical publications, vendor data, and various forms of engineering data
* Ability to read and interpret military and commercial specification and standards
* Strong analytical and complex problem-solving skills
* Ability to self-edit written and graphical work
* Proficient with desktop publishing using content management software
* Proficient with SGML/XML structured document authoring such as Arbor Text or equivalent
* Proficient with various research (i.e., customer-specific) applications for technical issues
* Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office Required:
- Aircraft technical publications experience
- S1000D experience
- Experience with Contenta content management software and XyVision publishing software Interpersonal and Communication Skills
* Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
* Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
* Ability to work collaboratively with others
* Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
* Ability to demonstrate initiative and be self-motivated
* Organizational skills
* Time management skills
* Detail orientation
* Task and goal-orientation
* Quality-driven
* Responsive and time-sensitive to customer's delivery schedule
* Strong, customer-focused work ethic and positive attitude
* Ability to mentor less experienced and knowledgeable writers on the team Education/Work Experience: Minimum 3 years technical writing experience Requires knowledge of technical publications writing.
Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor's degree, or equivalent trade experience.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
- Depends on experience and education The deadline to apply is 04/10/2026 Citizenship Requirement: U.S.
Person with the ability to work in the U.S.
Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring maintenance publications.
This position is in support of contracted technical publication revision services and the creation of new publications.
This is a remote work position.
Areas of Responsibility/Essential Functions:
* Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft maintenance publications.
* Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft maintenance publications
* Research, writing, and development of portions of aircraft maintenance publications according to the governing specification and published standard work
* Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
* Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature.
Judgment required compiling and selecting technical data for text and illustrations
* Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of aircraft maintenance publications
* Provide frequent status to supervision
* Meet established internal and external delivery milestones
* Interface with engineers over the content and review of the publications when required
* Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.
Competencies -Technical Skills, Knowledge, and Abilities
* Ability to write maintenance procedures from engineering drawings, specifications, performance data, or other similar literature
* Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
* Ability to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical publications, vendor data, and various forms of engineering data
* Ability to read and interpret military and commercial specification and standards
* Strong analytical and complex problem-solving skills
* Ability to self-edit written and graphical work
* Proficient with desktop publishing using content management software
* Proficient with SGML/XML structured document authoring such as Arbor Text or equivalent
* Proficient with various research (i.e., customer-specific) applications for technical issues
* Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office Required:
- Aircraft technical publications experience
- S1000D experience
- Experience with Contenta content management software and XyVision publishing software Interpersonal and Communication Skills
* Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
* Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
* Ability to work collaboratively with others
* Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
* Ability to demonstrate initiative and be self-motivated
* Organizational skills
* Time management skills
* Detail orientation
* Task and goal-orientation
* Quality-driven
* Responsive and time-sensitive to customer's delivery schedule
* Strong, customer-focused work ethic and positive attitude
* Ability to mentor less experienced and knowledgeable writers on the team Education/Work Experience: Minimum 3 years technical writing experience Requires knowledge of technical publications writing.
Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor's degree, or equivalent trade experience.
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
Not Specified
B
Assembler - 2nd Shift
✦ New 🏢 Butler Aerospace and Defense
Salary not disclosed
Assembler I, 2nd Shift (electronics or mechanical) Location: Phoenix, AZ (85034) Job ID: #72269 Pay Range: $19-22 Work is: Simple Assembly Preferred Skills: Read blue prints and or a BOM
- Bill of Material, hand/power tools and measuring tools Open to US citizens or permanent residents 1st Shift: 1st shift, M
- F 6:00am
- 230pm
- some over time on SATs 2nd Shift: 2nd Shift, M
- F 2:30pm
- 1130pm
- some over time on SATs ON-SITE work only THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
DESCRIPTIONS:
- Completes simple assembly operations of large or medium-sized components with use of machinery of a machine.
- Performs repetitive work to meet company quotas.
PREFERRED QUALIFICATIONS:
- Prefer ability to read blue prints and/ or (BOM) Bills of Material
- it is a list of Instructions on how to assemble a product and the raw materials, components, sub-assemblies, and quantities required to manufacture a finished product.
Job Description for Electrical Assembler 1 (Basic)
- Plans and performs a variety of Simple Mechanical or Electro-mechanical assembly, tests, fabrications, and inspection operations on various products in standard and non-standard environments to maintain flow of work.
- Reads, interprets and follows blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions.
* Operates hand tools, Power tools, electrical tools, hand cutters, measuring equipment and light equipment.
* Maintains inventory of product in work stations.
* Performs quality work checks, identifies product defects and records identified defects.
* Reworks and/or repairs assembled equipment and products according to engineering specification changes.
* Performs all work in accordance with quality standards and established safety procedures.
* Maintains a clean and safe work area.
* Ability to lift up to 40 lbs.
* Must be able to work in a standing position up to 8 hours per day Works under immediate supervision.
Normally receives detailed instructions on all work.
Develops basic job skills and learns company policies and procedures to complete routine tasks Tasks are routine/repetitive in nature, requiring limited judgment.
Has little or no role in decision-making.
HS Diploma.
In the absence of a HS diploma or GED, 2 years of relevant experience is required US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
- Bill of Material, hand/power tools and measuring tools Open to US citizens or permanent residents 1st Shift: 1st shift, M
- F 6:00am
- 230pm
- some over time on SATs 2nd Shift: 2nd Shift, M
- F 2:30pm
- 1130pm
- some over time on SATs ON-SITE work only THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
DESCRIPTIONS:
- Completes simple assembly operations of large or medium-sized components with use of machinery of a machine.
- Performs repetitive work to meet company quotas.
PREFERRED QUALIFICATIONS:
- Prefer ability to read blue prints and/ or (BOM) Bills of Material
- it is a list of Instructions on how to assemble a product and the raw materials, components, sub-assemblies, and quantities required to manufacture a finished product.
Job Description for Electrical Assembler 1 (Basic)
- Plans and performs a variety of Simple Mechanical or Electro-mechanical assembly, tests, fabrications, and inspection operations on various products in standard and non-standard environments to maintain flow of work.
- Reads, interprets and follows blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions.
* Operates hand tools, Power tools, electrical tools, hand cutters, measuring equipment and light equipment.
* Maintains inventory of product in work stations.
* Performs quality work checks, identifies product defects and records identified defects.
* Reworks and/or repairs assembled equipment and products according to engineering specification changes.
* Performs all work in accordance with quality standards and established safety procedures.
* Maintains a clean and safe work area.
* Ability to lift up to 40 lbs.
* Must be able to work in a standing position up to 8 hours per day Works under immediate supervision.
Normally receives detailed instructions on all work.
Develops basic job skills and learns company policies and procedures to complete routine tasks Tasks are routine/repetitive in nature, requiring limited judgment.
Has little or no role in decision-making.
HS Diploma.
In the absence of a HS diploma or GED, 2 years of relevant experience is required US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
Not Specified
D
Psychologist (Clinical)
Salary not disclosed
Clinical Psychologist (GS- Carl R. Darnall Army Medical Center, Fort Cavazos, TX
*Recruitment/Relocation Incentives may be authorized
*Student loan repayment may be authorized
*Advance In-Hire may be authorized
Fort Cavazos is located in the beautiful 'hill and lake' country of Central Texas between Killeen and Copperas Cove and is approximately 60 miles north of the capital city of Austin, 50 miles south of Waco, 160 miles south of Dallas, and 150 miles north of San Antonio.
Founded in 1942, this 340-sq.-mile military base is the Army's Premier Installation to train and deploy heavy forces.
A 214,968 acre installation, Fort Cavazos is now the largest active duty armored post in the U.S. Armed Forces and the only post in the United States capable of stationing and training two Armored Divisions.
The rolling, semi-arid terrain is ideal for multifaceted training and testing of military units and individuals. Additionally, the Killeen community is a model of support for Army families. There are lots of resources and networks available to assist you.
Working for the Department of Defense comes with an abundance of benefits and perks to include competitive compensation packages, paid-time off, medical benefits, student loan repayments, and retirement package with Thrift Savings Plan to include matching employer contributions. For more information, please visit the following link:
Responsibilities
1. CLINICAL ASSESSMENT: Screens and interviews patients, and performs bio-psychological social evaluations, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Monitors and evaluates completeness of patient intake. Selects, approves, and documents treatment priorities through a treatment plan. Reviews level of care for appropriateness. Evaluates and approves referral sources. Prepares and delivers briefings and presentations. Conducts meetings, conferences, etc. Establishes cooperative agreements among various treatment providers. Monitors, evaluates, and approves use of community resources. Provides reports and approves consults.
2. THERAPY, CASE STAFFING, AND TREATMENT: Conducts therapy, monitors, approves, and documents all treatment planning, and provides advice for case staffing, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Reviews and approves the appropriate modality of each patient. Develops treatment processes and procedures for orientation of patients.
3. ADMINISTRATION: Executes performance initiatives (PI) through revision of clinical standards and procedures; performs special actions and a variety of program administrative duties; and performs a wide variety of quality management/quality assurance (QM/QA) duties to meet Joint Commission on Accreditation of Healthcare Organizations (JCAHO) requirements, using expert knowledge of the general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Evaluates clinical records and monitors all test administration and scoring for quality assurance. Evaluates environment of care. Monitors all risk management issues and takes appropriate action. Establishes and executes performance initiatives. Establishes and monitors objective behavioral outcome measures. Develops and revises professional service plans. Evaluates and revises standard operating procedures.
4. TESTING: Oversees and interprets appropriate tests, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to clinical psychology; expert knowledge of the full range of psychological testing; knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze patient assessments; skill in written communication; and skill in oral communication. Monitors, maintains, and secures test instrument inventory. Approves selection of various tests. Interprets various complex tests. Provides consultation regarding testing and interpreting issues. Evaluates test results for release. Evaluates diagnostic summaries.
5. PROFESSIONAL DEVELOPMENT ACTIVITIES: Develops, implements, and evaluates professional development activities, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to clinical psychology; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Coordinates inter-departmental in-service training. Evaluates scope of practice and modifies, as required. Evaluates training opportunities. Evaluates orientation activities. Attends American Psychology Association or the National Association of Social Workers approved continuing education training. Adheres to the applicable Code of Ethics. Evaluates professional development activities.
PERFORMS OTHER DUTIES AS ASSIGNED.
Qualifications
Who May Apply: US Citizens
Degree: Doctoral Degree (Ph.D. or equivalent) directly related to full professional work in clinical psychology.
Specialized Experience: One year of specialized experience which includes performing psychological evaluations, developing behavioral health treatment plans, and providing psychological counseling services. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
License: The Clinical Psychologist position requires a current, active, valid, unrestricted clinical license to practice Psychology independently, offered by a U.S. State, District of Columbia, commonwealth, territory or jurisdiction.
Must be Basic Life Support (BLS) certified.
*Recruitment/Relocation Incentives may be authorized
*Student loan repayment may be authorized
*Advance In-Hire may be authorized
Fort Cavazos is located in the beautiful 'hill and lake' country of Central Texas between Killeen and Copperas Cove and is approximately 60 miles north of the capital city of Austin, 50 miles south of Waco, 160 miles south of Dallas, and 150 miles north of San Antonio.
Founded in 1942, this 340-sq.-mile military base is the Army's Premier Installation to train and deploy heavy forces.
A 214,968 acre installation, Fort Cavazos is now the largest active duty armored post in the U.S. Armed Forces and the only post in the United States capable of stationing and training two Armored Divisions.
The rolling, semi-arid terrain is ideal for multifaceted training and testing of military units and individuals. Additionally, the Killeen community is a model of support for Army families. There are lots of resources and networks available to assist you.
Working for the Department of Defense comes with an abundance of benefits and perks to include competitive compensation packages, paid-time off, medical benefits, student loan repayments, and retirement package with Thrift Savings Plan to include matching employer contributions. For more information, please visit the following link:
Responsibilities
1. CLINICAL ASSESSMENT: Screens and interviews patients, and performs bio-psychological social evaluations, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Monitors and evaluates completeness of patient intake. Selects, approves, and documents treatment priorities through a treatment plan. Reviews level of care for appropriateness. Evaluates and approves referral sources. Prepares and delivers briefings and presentations. Conducts meetings, conferences, etc. Establishes cooperative agreements among various treatment providers. Monitors, evaluates, and approves use of community resources. Provides reports and approves consults.
2. THERAPY, CASE STAFFING, AND TREATMENT: Conducts therapy, monitors, approves, and documents all treatment planning, and provides advice for case staffing, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Reviews and approves the appropriate modality of each patient. Develops treatment processes and procedures for orientation of patients.
3. ADMINISTRATION: Executes performance initiatives (PI) through revision of clinical standards and procedures; performs special actions and a variety of program administrative duties; and performs a wide variety of quality management/quality assurance (QM/QA) duties to meet Joint Commission on Accreditation of Healthcare Organizations (JCAHO) requirements, using expert knowledge of the general and specific concepts, principles, procedures, and practices relating to psychological counseling; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Evaluates clinical records and monitors all test administration and scoring for quality assurance. Evaluates environment of care. Monitors all risk management issues and takes appropriate action. Establishes and executes performance initiatives. Establishes and monitors objective behavioral outcome measures. Develops and revises professional service plans. Evaluates and revises standard operating procedures.
4. TESTING: Oversees and interprets appropriate tests, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to clinical psychology; expert knowledge of the full range of psychological testing; knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze patient assessments; skill in written communication; and skill in oral communication. Monitors, maintains, and secures test instrument inventory. Approves selection of various tests. Interprets various complex tests. Provides consultation regarding testing and interpreting issues. Evaluates test results for release. Evaluates diagnostic summaries.
5. PROFESSIONAL DEVELOPMENT ACTIVITIES: Develops, implements, and evaluates professional development activities, using expert knowledge of general and specific concepts, principles, procedures, and practices relating to clinical psychology; expert knowledge of the full range of psychological testing; expert knowledge of psychodynamics, psychopathology, and therapeutic techniques; ability to analyze clinical assessments of patients; skill in written communication; and skill in oral communication. Coordinates inter-departmental in-service training. Evaluates scope of practice and modifies, as required. Evaluates training opportunities. Evaluates orientation activities. Attends American Psychology Association or the National Association of Social Workers approved continuing education training. Adheres to the applicable Code of Ethics. Evaluates professional development activities.
PERFORMS OTHER DUTIES AS ASSIGNED.
Qualifications
Who May Apply: US Citizens
Degree: Doctoral Degree (Ph.D. or equivalent) directly related to full professional work in clinical psychology.
Specialized Experience: One year of specialized experience which includes performing psychological evaluations, developing behavioral health treatment plans, and providing psychological counseling services. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
License: The Clinical Psychologist position requires a current, active, valid, unrestricted clinical license to practice Psychology independently, offered by a U.S. State, District of Columbia, commonwealth, territory or jurisdiction.
Must be Basic Life Support (BLS) certified.
Not Specified
A
Computer Systems Specialist - Basic
Salary not disclosed
About Us
AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future.
AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future.
AGE Solutions is seeking a Computer Systems Specialist to support a DoD Local Area Network (LAN) engineering team. The selected candidate will work daily from a customer facility in Columbus, OH.
Responsibilities Include:
- Under general direction, provide technical support using computer equipment and applications on a wide area network (WAN) or large local area network (LAN).
- Monitor, install, test, and resolve problems with computer network hardware and software.
- Adapt existing software to accommodate the database needs of departments.
- Develop and/or maintain systems, tools, Intranet and Internet Web sites, and perform related duties as required.
Required Skills, Qualifications and Experience:
- Experience:
- Two years of progressive IT experience.
- Clearance:
- Secret clearance with an adjudicated IT-I qualifying investigation (DoD Top Secret).
- Certifications:
- DoD 8570 IAM I Certification (Security+)
- Network+ or other relevant Telecommunication certifications
- Location:
- This role is fully onsite in Columbus, OH and requires approximately 20% travel within the United States.
Work Environment and Physical Demand:
- Must be able to work at a computer for extended periods of time.
Compensation: $48,000+
At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.
- 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
- Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
- 401(k) with Match: We match 3% of your contributions with immediate vesting.
- Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
- Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
- Parental Leave: 15 days of fully paid leave for new parents, because family matters.
- Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
- Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
- Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
At AGE, you'll do work that matters, supported by a company that delivers for its people.
Not Specified
Q
Mechanical Designer & Drafter - Secret Clearance
Salary not disclosed
Quest Defense Systems and Solutions is looking for Mechanical Design/Drafter to be responsible for assisting with designing, developing, documenting, and maintenance of Technical Data Packages (TDP).
Applicants must be US Citizen and be able to obtain and maintain a security clearance. This position is 100% on site in Tucson, Arizona
Role & Responsibilities:
• Create dimensioned detail drawings compliant with industry, using Client Engineering Document Standards (EDS) and manufacturing standards.
• Dimension detail drawings ensuring they are accurate, complete and dimensioned to support program requirements and tolerance build up analysis.
• Update detail drawings throughout the various review cycles per engineering input and Implement drawing updates as per engineering change requests
• Utilize company modeling best practices and adhere to TE One Page processes
• Collaborate effectively cross functionally, building relationships with downstream reviewers and releasers.
• Use software in recommended methods which promote consistency for ease of revision and reduction in model/drawing complexity.
Required Skills (Technical Competency):
• Typically requires a University Degree or equivalent experience and minimum (2) years of prior relevant experience or An Advanced Degree in a related field
• Proficiency using CAD tools (i.e. Creo, AutoCAD, Solidworks, etc)
• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance
Desired (not required):
• Experience with CAD solid modeling tools and analysis tools with an emphasis on ProE / CREO Parametric
• Experience with creating design drawing packages
• Experience in Model Based Engineering or Model Based Design
• Previous Internship and/or Co-Op
Physical Requirements & Work Environment:
• Mostly Office Environments, Occasional Shop Floor involvement.
• Substantial amounts of telephone and computer work.
• Heavily Regulated Industries with strict adherence to procedures.
• Flexibility to meet business deadlines by staying late or arriving early.
• Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM
• Ability to use personal transportation to visit customer locations.
• Due to the nature of the work, all candidates must be a U.S. Citizen.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Full compensation package is based on candidate experience and certifications
Not Specified
D
Senior FPGA Engineer
Salary not disclosed
Senior FPGA Engineer
Delta Information Systems is seeking a hands-on Senior FPGA Engineer with strong RF communications and DSP experience under our GDP division to design and develop real-world aerospace telemetry hardware.
Job Overview
This role focuses on FPGA/DSP design for RF receivers, taking designs from MATLAB modeling through FPGA implementation, board bring-up, and system integration. You’ll work on mission-critical products used in flight test, missile test, range safety, and space applications.
This is a hardware focused engineering role, not a software only position. Candidates should have hands-on FPGA and board-level experience.
This is an onsite position located in Horsham, PA. Hybrid option may be considered. No employer visa sponsorship is available.
Responsibilities
- FPGA/DSP design and debug for telemetry RF receivers
- VHDL-based FPGA design, simulation, and verification
- MATLAB modeling to support DSP and system architecture
- Board-level development, PCB oversight, and lab bring-up
- Integration of embedded CPU and FPGA designs
- Cross-functional collaboration with engineering and marketing
- Documentation: requirements, test plans, design reviews
- Jira-based issue tracking and design reviews
Qualifications
- BS in Electrical Engineering
- 5+ years in DSP-based product development
- Hands-on FPGA design experience (VHDL)
- RF receiver signal processing experience
- Familiarity with modulation schemes (PCM/FM, SOQPSK)
- Familiarity with FEC techniques (LDPC, Viterbi)
- FPGA simulation + MATLAB experience
- Lab experience with test equipment
- Embedded C/C++ a plus
- U.S. Persons Only (ITAR/EAR)
This position may require exposure to information, which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be “U.S. persons” within the meaning of U.S. regulations.
Compensation
- Salary Range: $135,000-$165,000 (based on experience)
- 100% PAID COVERAGE for Medical, Dental, and Vision for the Employee and Dependents
- 401(k) Employer Match
- Employee Stock Ownership Program (company funded)
- Life Insurance (company funded)
- Short-Term Disability (company funded)
- Long-Term Disability (company funded)
- 80 hours (Vacation)
- 40 hours (Sick Leave)
- 11 days (Paid Holidays
- HealthCare FSA
- Dependent Care FSA
What We Offer
- Opportunities for training, certifications, and career growth.
- A mission-driven culture where your work contributes to national security.
- Exposure to advanced technologies and programs critical to the aerospace and defense sector.
Why Join Delta
- 50+ years in aerospace telemetry
- Engineers own designs end-to-end
- Small, experienced team with minimal bureaucracy
- Hardware that ships, flies, and is used in the field
About Delta Information Systems, Inc.®
Delta Information Systems (DIS) is an industry-leading supplier of high-quality aerospace telemetry products for Flight Test, Missile Test, Range Safety, Launch Support and Satellite Command and Control applications. Their products address the complete telemetry chain from Data Acquisition, Storage, Transport and Distribution to Telemetry Processing and Display. DIS customers include all DoD entities, all Major Primes, Integrators, Gov Labs, Aircraft & Missile Manufacturers, & Launch Facilities.
In addition, Delta Information Systems (DIS) designs and develops sophisticated electronic equipment that is specifically designed to reliably operate in harsh environments. They deliver critical video communications capability for manned and unmanned Intelligence, Surveillance and Reconnaissance (ISR) programs.
Not Specified
jobs by
✓ All jobs loaded