Basys Processing Reviews Jobs in Usa

Insight Global is seeking Technical Evaluation Review Board/CCB Coordinator to join our team for an exciting opportunity to work on a unique government contract. The contract assists in acquisition and technical sustainment engineering and will augment government resources. The coordinator manages government technical review board submissions, ensuring all programs meet required deliverables and are fully prepared for review before board meetings. They control document accuracy, track changes, and maintain compliant review packages across all stakeholders. The role requires confidently driving engineers and IPTs to meet requirements and deadlines, including pushing back when inputs are incomplete. This is a highly organized, assertive position focused on accountability, readiness, and execution.

Must Haves:

• BS/MS in engineering/specialty area
• 7 yrs directly related experience (5 yrs with MS degree)
• Active secret level security clearance or higher
• Strong planning, coordination, and organizational skills with the ability to manage multiple priorities
• Demonstrated experience developing, maintaining, and assessing technical baselines within controlled programs
• Familiarity with engineering standards, manufacturing methods, and configuration management practices, including military and ASME-guided environments
• Working knowledge of technical drawing conventions and engineering documentation controls
• Proficiency with Microsoft Office tools to prepare data-driven reports, metrics, and formal documentation
• High attention to detail, strong writing and verbal communication skills, and the ability to manage time effectively
• Ability to sit on-site at Hill AFB in Clearfield, UT Monday-Wednesday

Plusses:

• Experience supporting configuration and data management activities within a defense or government program environment
• Working knowledge of Air Force or DoD engineering release processes, configuration control standards, and technical documentation lifecycle management
• Familiarity with Engineering Change Proposals (ECPs), Interface Control Documents (ICDs), and associated revision and audit activities
• Prior involvement with functional and physical configuration audits, including coordination with suppliers or government facilities
• Training or certification in configuration or data management disciplines (e.g., CMPIC or similar)
• Demonstrated ability to maintain and protect complex engineering baselines for hardware and software systems
• Strong judgment and decision-making skills aligned with regulatory, contractual, and policy requirements
• Commitment to continuous learning and maintaining up-to-date technical proficiency

The Estimator is responsible for ensuring all flooring bids are technically accurate, competitively structured, and financially sound before submission to customers. This role serves as the final quality control checkpoint for bid accuracy, scope alignment, and margin protection across new construction and large project bids.  

They will work closely with sales, estimating, purchasing, and operations to ensure bids are properly structured, risk is identified early, and projects are prepared for successful execution. 

This position requires extensive experience in flooring estimating, construction bidding, and plan/spec review, with the ability to identify scope gaps, quantity errors, and pricing risks before bids are released. This role plays a critical part in protecting company margin, preventing costly project mistakes, and improving bid quality across the organization. 

Primary Responsibilities:

Bid Strategy & Quality Control

• Review large and complex flooring bids prior to submission.
• Validate takeoffs, material quantities, labor assumptions, and pricing structures.
• Ensure bids align with project plans, specifications, and scope requirements.
• Identify risk areas such as:
• Scope gaps
• Quantity miscalculations
• Incorrect product specifications
• Margin erosion
• Installation complexity
• Provide feedback and corrections to estimators and sales teams before submission.

Preconstruction Review

• Review architectural plans and specifications for flooring scope.
• Confirm scope alignment between drawings, specifications, and proposals.
• Identify missing scope or potential change order risks prior to bid submission.
• Assist estimating team in improving bid structure and consistency.

Margin Protection

• Ensure bids meet company margin expectations.
• Identify pricing risks before customer submission.
• Flag bids that require leadership review.

Bid Process Improvement

• Identify recurring estimating errors and training opportunities.
• Develop internal bid review standards and checklists.
• Support ongoing estimator training and quality improvement.

Post-Award Project Validation

• Review awarded bids to confirm final scope and pricing accuracy.
• Ensure project setup in ERP reflects the approved bid structure.
• Confirm correct materials, quantities, and pricing before purchasing.

Cross-Department Coordination

• Work closely with sales, estimating, purchasing, operations, and finance to ensure projects are properly prepared for execution.

Required Experience

• 5–10+ years of construction estimating experience
• Extensive flooring estimating experience
• Experience reviewing construction plans and specifications
• Strong knowledge of flooring materials and installation methods
• Experience preparing or reviewing large project bids
• Strong understanding of construction scopes and subcontractor bidding
• Advanced Excel skills
• Experience with estimating software

Preferred

• Experience estimating large multifamily or production builder projects
• Experience with takeoff software such as:
• MeasureSquare
• PlanSwift
• Bluebeam

No Recruiters, please.

At a Glance

Company: Karl Storz
Location: Franklin, MA (On-site)
Job Type: Full-Time
Pay Range: $97,900 – $127,400 per year (DOE)
Shift: Day Shift | Monday – Friday
Overtime: As Needed
Experience Level: Senior (5+ years machining/manufacturing experience)
Education: Bachelor’s Degree Required (Mechanical or Industrial Engineering)
Industry: Medical Device Manufacturing
Apply: Directly through hireCNC

---

Why This Role Exists

This role exists to support ongoing product innovation, process optimization, and production scalability within a high-precision medical manufacturing environment.

At Karl Storz, this Process Engineer plays a key role in developing, improving, and sustaining CNC machining processes used to produce complex surgical components — ensuring efficiency, quality, regulatory compliance, and long-term manufacturability.

---

The Work You’ll Be Doing

In this role, you will:

• 
  
• Develop machining processes and operation sheets from engineering data
  
• Implement new manufacturing methods, tooling, and equipment improvements
  
• Optimize processes for quality, efficiency, and cost reduction
  
• Design assembly tooling, jigs, fixtures, and production aids
  
• Lead cross-functional projects from concept through implementation
  
• Analyze manufacturing data and drive corrective actions with Quality teams
  
• Evaluate outside processes and vendors for performance and reliability
  
• Support capacity planning and equipment selection decisions
  
• Create clear documentation to support production and compliance
  
• Train personnel and provide daily technical support to production teams
  
• Ensure compliance with FDA, ISO 13485, ISO 9001, and GMP standards
  

---

Machines, Controls & Manufacturing Environment

You’ll support machining operations involving:

Equipment: Multi-axis CNC mills, lathes, and precision machining systems
Inspection Tools: CMM, profilometers, vision systems, precision metrology equipment
Process Tools: SPC methods, Lean manufacturing techniques
ERP Systems: SAP, Oracle, or similar

---

Materials You’ll Work With

• 
  
• Stainless Steel
  
• Nitinol
  
• Nickel Alloys
  
• Other medical-grade materials
  

---

What We’re Looking ForRequired:

• 
  
• Bachelor’s degree in Mechanical or Industrial Engineering
  
• 5+ years of manufacturing or machining-related experience
  
• Strong knowledge of CNC machining processes and equipment
  
• Proficiency with GD&T and precision metrology
  
• Experience developing and improving manufacturing processes
  
• Strong documentation and project management skills
  
• Ability to manage multiple priorities in a regulated environment
  
• Excellent communication and cross-functional collaboration skills
  

Preferred:

• 
  
• Medical device manufacturing experience
  
• Lean Manufacturing or Six Sigma certification
  
• Fixture and tooling design experience
  
• GMP / FDA-regulated environment experience
  
• ERP experience (SAP or Oracle)
  

---

Why Engineers Like Working Here

Professionals choose Karl Storz because:

• 
  
• Clean, modern, climate-controlled manufacturing facility
  
• Meaningful work supporting life-saving medical technologies
  
• Strong collaboration between engineering, production, and quality
  
• Stable workload with long-term growth opportunities
  
• Competitive salary and comprehensive benefits
  
• Tuition reimbursement (up to $5,250/year)
  
• 401(k) with 60% match on first 6%
  
• 3 weeks vacation + 11 paid holidays
  
• Up to 8 weeks fully paid parental leave
  

---

Pay, Benefits & Schedule

Pay Range: $97,900 – $127,400 per year (based on experience)

Benefits Include:

• 
  
• Medical, dental, vision
  
• 401(k) with company match
  
• PTO + paid holidays
  
• Tuition reimbursement
  
• Parental leave
  
• Life, STD/LTD insurance
  
• Flexible Spending Accounts
  
• Wellness and fitness reimbursement
  
• Pet insurance options
  

Schedule:
Day Shift | Monday – Friday

Overtime: As needed

---

Apply

Interested candidates can apply directly through hireCNC.

Apply Now or Save This Job to come back later.

Performs a variety of quality and/or safety checks to ensure compliance with quality standards, reliability standards, and all specifications. Assists with troubleshooting and resolving quality issues through audits, sampling, inspection, and functional testing. Supports implementation of new quality processes.  

At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day.  We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily.  

Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed.   At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today!  

Key Responsibilities

1. 
   
2. Monitors processes to ensure compliance with food safety, regulatory and company compliance, including GMP, HACCP, and SOPs.
   
3. Collects microbiological and product samples for testing and evaluation.
   
4. Performs checks of product quality against specifications.
   
5. Assists with audits of the process, GMP’s, food safety, and customer audits.
   
6. Investigates issues related to Quality and Food Safety.
   
7. Records findings and assists with troubleshooting quality, safety, or sanitation issues.
   
8. Applies holds to nonconforming products and materials.
   
9. Assists with product improvement projects.
   
10. Assists with data verification and quality metrics reporting.
    

Minimum Qualifications (Educations & Experience)

• 
  
• High school diploma, GED, or equivalent
  
• 1+ year of experience or the knowledge, skills, and abilities to succeed in the role
  

Knowledge, Skills, and Abilities

Butterball Core Competencies

Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies:

• 
  
• Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs.
  
• Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity.
  
• Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead.
  
• Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen.
  
• Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate.
  

Essential Knowledge, Skills, and Abilities

• 
  
• Knowledge of workplace safety rules
  
• Basic understanding of manufacturing processes
  
• Good math skills
  
• Ability to speak, read, and write in English
  
• Good communication and customer service skills with the ability to interact at all levels
  
• Excellent attention to detail
  
• Firm problem-solving, organization, time-management, and critical thinking skills
  
• Ability to understand and follow directions to ensure compliance with all applicable standards and regulations
  

Preferred Knowledge, Skills, and Abilities

Physical Demands

• 
  
• While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus.
  

Working Conditions & Travel Requirements

• 
  
• Work will be performed in a variety of conditions. Occasionally in a climate-controlled office environment(s) and primarily in a manufacturing plant environment with varying conditions, such as cold areas, wet areas, warm areas, chemicals, and other site conditions. This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment.
  
• The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection.
  
• Occasional travel may be required.
  

Disclaimer

We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. 

This position is deemed Safety Sensitive for purposes of Butterball’s Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. 

The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer. 

Position Title Specimen Processing Tech
- Night Shift
- Fri.

- Mon.

Nights
- Full Time Bell Hospital Position Summary / Career Interest: The Specimen Processing Technician is a position within the clinical laboratory and microbiology that is responsible for managing specimens once they arrive in the department and handling multiple pre-analytical variables.

Depending on the area of the lab, this may include, but are not limited to: positive patient identification, correct tube types, specimen conditions and integrity and how they affect laboratory results.

The Specimen Processing Technician accepts samples in the laboratory and performs tasks including releasing orders out of the Hospital Information System (HIS), receiving specimens in the Laboratory Information System (LIS), and processing specimens to include aliquoting and preparation for the automation line.

The specimen Processing Technician troubleshoots specimen and order issues and communicates with care providers across the Health System.

The Specimen Processing Technician working in Microbiology is responsible for performing pre-analytic functions such as: specimen receipt, sterile processing, specimen manipulation including sonication and tissue grinding, determination of appropriate culture media for different specimen types and plating.

The Specimen Processing Technician follows regulatory, accreditation, safety and hospital standards, policies and procedures, and participates in quality assurance and quality improvement activities.

Responsibilities and Essential Job Functions Creates Registration encounters, releases orders out of HIS when indicated; receives samples in LIS; prints barcode labels and affixes labels to specimens.

Completes order entry functions or paperwork as required.

Ensures proper container type, centrifugation, specimen sterility, and transport conditions for specimens.

Ensures positive patient identification, correct specimen collection and handling/transport; performs specimen processing duties and prioritizes based on urgency Ensures the specimen and orders received are appropriate for requested testing.

Prioritizes specimens based on clinical urgency.

- Performs specimen processing duties including but not limited to: aliquoting urine and body fluid samples, supply storage, Kanban supply, inventory monitoring and storing patient samples appropriately.

In Microbiology, uses sterile techniques to handle, manipulate, and inoculate specimens on to culture media, including but not limited to determination of selecting the correct culture media based on specimen, order and protocols, sterile aliquoting, sonification and tissue grinding.

Assists in pathology specimen preservation, by adding formalin to specimens, and/or paging residents or providers as needed.

Fields inquiries and communicates information in written and verbal formats.

Answers the phone and provides customer service to internal and external customers following established standards.

Consults Specimen Processing Coordinator, supervisor or lab leadership when appropriate.

Assists other staff with processing questions or automation line issues.

Assists with training new hires, students, or medical students, if applicable.

Disposes of bio-hazardous materials, chemical waste, sharps and other potentially hazardous materials according to policy and strictly adheres to safety and infection control procedures.

Uses and wears PPE (Personal Protective Equipment) as necessary to perform job duties safely and minimize risk.

Other duties as assigned.

Must be able to perform the professional, clinical and or technical competencies of the assigned unit or department.

These statements are intended to describe the essential functions of the job and are not intended to be an exhaustive list of all responsibilities.

Skills and duties may vary dependent upon your department or unit.

Other duties may be assigned as required.

Required Education and Experience High School Graduate 6 months of experience in a clinical laboratory
- working with biological specimens Preferred Education and Experience Completion of a Phlebotomy program 1 or more years of experience in specimen collection and processing.

Required Licensure and Certification If required by position to be filled, must obtain Department of Transportation and International Air Transportation Association certification within 180 Days Time Type: Full time Job Requisition ID: R-46315 Important information for you to know as you apply: The health system is an equal employment opportunity employer.

Qualified applicants are considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, ancestry, age, disability, veteran status, genetic information, or any other legally-protected status.

See also Diversity, Equity & Inclusion .

The health system provides reasonable accommodations to qualified individuals with disabilities.

If you need to request reasonable accommodations for your disability as you navigate the recruitment process, please let our recruiters know by requesting an Accommodation Request form using this link .

Employment with the health system is contingent upon, among other things, agreeing to the health-system-dispute-resolution-program.pdf and signing the agreement to the DRP.

Need help finding the right job? We can recommend jobs specifically for you! Create a custom Job Alert by selecting criteria that suit your career interests.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

We are Boeing Global Services (BGS) Engineering team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We provide engineering design and support, including aftermarket modifications, and are innovating to make product and services safety even stronger. Join us and put your passion, determination, and skill to work building the future! #TheFutureIsBuiltHere #ChangeTheWorld

BGS is seeking an Experienced Mechanical Design Review Engineer within Government Training Engineering (GTE) in Hazelwood, MO or Oklahoma City, OK. The GTE Hardware Design team is responsible for the design and development of aircrew & maintenance training devices.

A successful candidate will have detail-oriented Drawing Quality Check Engineer mindset with strong design fundamentals, cross-discipline engineering insight, and practical PLM experience to ensure accurate, manufacturable documentation and controlled product data. This person influences design early, reduces downstream issues through clear drawings and constructive feedback, maintains reliable part and PLM records, and collaborates effectively with engineers to support smooth product development and production readiness across all GTE Training platforms.

Position Responsibilities:

• Review and validate engineering drawings and markups for completeness, accuracy, and adherence to company standards and specifications
• Maintain PLM user groups and actively manage part catalog records and device application data to ensure up-to-date, auditable configurations
• Provide clear, constructive feedback and training to a multi-discipline engineering team, fostering continuous improvement and knowledge sharing
• Work independently with high motivation and accountability, prioritizing tasks and driving timely resolution with minimal supervision
• Communicate professionally and collaboratively across teams, resolving issues diplomatically and maintaining positive working relationships

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering or related field
• Experience with product lifecycle
• 5 or more years’ related work experience or an equivalent combination of technical education and experience
• Basic understanding of Microsoft office and tools

Preferred Qualifications (Desired Skills/Experience):

• 10+ years of experience in a design environment
• Deep understanding of design, production, and build processes, enabling you to identify manufacturability improvements, reduce rework, and provide actionable recommendations that influence early product design decisions
• Strong grasp of design principles and techniques, including drafting standards, tolerancing, GD&T, and drawing best practices, to ensure clear, unambiguous documentation and consistent interpretation across teams
• Broad familiarity with multiple engineering disciplines (electrical, mechanical, and systems), allowing you to interpret cross-discipline requirements, anticipate integration issues, and communicate effectively with subject-matter experts
• Experience with PLM tools (ex. CMPRO or Teamcenter), including creating and maintaining part records, managing change processes, configuring user groups, and extracting accurate device application and BOM data for downstream stakeholders

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $96,050 - $140,300

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.