Basic Level Excel Test Jobs Remote Jobs in Usa

• 
  
• Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents
  
• Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes
  
• Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials
  
• Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes
  
• Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems
  
• Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule
  
• Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance
  
• Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements
  
• Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes
  
• Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project
  
• Liaise the Technical Engineer for submission of material submittals to Consultant
  
• Develop and maintain inspection reports
  
• Ensure compliance to federal and state laws, as well as company standards and specifications
  
• Maintain calibration of quality testing equipment
  
• Perform inspections across all stages of production
  
• Advising on procedures to improve production efficiency
  
• Prepare and maintain test data for review
  
• Evaluate data and draft reports, noting any relevant deviations from existing standards
  
• Identify areas for quality control improvement and implement new methods accordingly
  
• Communicate quality or compliance concerns with urgency
  

• 
  
• Technical Military MOS, trade school and/or degree
  
• Experience and/or education and internship in complex facilities or mission critical projects is preferred
  
• Any civilian or military technical certifications is a plus
  
• Experience with writing and enforcing standard operating procedures (SOPs)
  
• Solid understanding of test equipment & software
  
• Minimum of 5-9 years of inspection and/or production experience
  
• Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions
  
• Demonstrated ability to work independently with minimal supervision
  
• Excellent organizational skills
  
• Demonstrated ability to analyze and interpret information
  
• Must be a US citizen
  
• Must be able to travel 70%
  
• Must live reasonably close to Shreveport, LA
  

• 
  
• Advanced Excel skills preferred
  
• Experience using Microsoft Office Suite, Word and Microsoft Project
  
• Basic knowledge of systems design for various projects
  

• 
  
• No certificates or licenses required
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high.
  

Job Description

Job Summary:

Manages a team of chemists/scientists/technicians and executes pressure sensitive adhesive (PSA) tape prototype development, scale-up, and product launch in various applications. The group leader will focus on platform technology development, new product development for customer-driven projects, as well as continuous improvement and cost reduction of existing products and processes. Emphasis on acrylic polymer synthesis, silicone and rubber adhesive formulations, PSA rheology, knowledge of tape assemblies, backing material selection, and release liner familiarity. Works with customers and AR teams to collect design input and develop new product design strategies. Technical and laboratory lead in developing new adhesive solutions, robust products, and basic production processes that can be successfully commercialized.

Essential Functions:

• Establishes and directs research programs for new product development and product/process improvement of current products. Responsible for complex basic research and/or product development projects.
• Leads lab personnel and facilitates development of product constructions and processes; designs & conducts chemical experiments on both lab- and production-scale; designs and specifies production scale processes and contributes to product validation.
• Conducts and directs required laboratory work to develop new PSA and tape assemblies including polymerization, formulation, coating and testing. Develops new products that lead to sustainable commercial revenue.
• Completes any necessary regulatory forms. Ensures team follows similar protocols and procedures.
• Implements and executes product development to align with Stage Gate timelines and sets prioritization with the Director of Innovation and Product Management team. Meets technical commitments in order to complete project progression dates and milestones on time.
• Drives patent strategy (reading, planning, and execution) within the team to align with goals established by the Director of Innovation.
• Consults with Director of Innovation, Product Management, Operations, Quality and Sales personnel on group priorities and strategy. Active role in setting overall Innovation direction & strategy. Participates in business planning process with one or more business as appropriate. Establishes program priorities, objectives and responsibilities for group. Ensures effective communication of Innovation program progress for own work and for overall group.
• Functions as a technical lead on product development teams. Leads cross-functional product development teams to ensure effective prototype development, to drive prototypes to commercial products, and to translate findings into impactful business revenue.
• Participates and occasionally leads establishment and implementation of R&D policies and procedures. May be responsible for specified lab areas.
• Interfaces with customers on new product applications and networks externally to assure highest level of competence is maintained.
• Develops skills within the team and evaluates performance of department personnel. Mentors and and coaches associates to effectively work in the department in addition to promoting a collaborative work environment (within the department and cross-functionally). Executes performance reviews annually.
• Makes identifiable and substantial contributions to continuous improvement. Performs all duties consistent with established AR guidelines consistent with ISO-9001 and those elements of GMP deemed necessary to support our business (as outlined in the Quality Manual). Actively complies with and endorses Department and Company objectives.
• Responsible for the proper disposal of hazardous waste into the proper labeled containers and drums.

Additional Responsibilities:

• Perform other related duties as assigned by management.

Job Specifications:

• BS degree (or higher) in chemistry, chemical engineering, polymer science or materials science and/or significant industrial experience. Ph.D. degree preferred but not required.
• Greater than 3 years adhesive formulation, mixing process and coating process experience. Demonstrates detailed knowledge of required chemical and physical test methods for PSA characterization. Requires an aptitude to use sensitive test equipment.
• Basic understanding and familiarity with adhesive chemistries and coating technologies. Familiarity and understanding of various adhesive chemistries (acrylic, silicone, rubber).
• Understanding of adhesive tape constructions (backing materials, release liner selection, adhesive chemistries, etc.)
• Knowledge of PSA rheology, dynamic mechanical analysis, and other physical polymer characterization methods
• Supervisory experience preferred with experience managing a team of scientists in product development, technology platform expansion, and patent filing.
• Demonstrated technology and/or product development capability.
• Expertise required in Stage Gate processes and how to move projects through the pipeline with discipline, efficiency, and accountability
• Excellent program prioritization and coordination skills, ability to manage multiple priorities
• Ability and willingness to work effectively in a diverse, disciplined team environment with limited supervision. Ability to work independently and drive project execution with limited guidance.
• Excellent program prioritization and coordination skills, ability to manage multiple priorities.Agility to adapt and shift to changing priorities, proactively anticipating obstacles, and flexibility to seek out alternative solutions when faced with meeting customer design inputs and timelines
• Must communicate fluently in English
• Ability to maintain confidentiality of AR information
• Excellent oral & written communication skills
• Excellent interpersonal skills
• Knowledge of computers & related word processing, spreadsheet & e-mail software – Microsoft preferred
• Ability to employ statistical analysis techniques. Familiarity with design of experiments software and set-up, ability to employ statistical analysis techniques
• Ability to develop and present effective technical presentations to internal and external customers.

Candidates must be U.S. Citizens or Green Card holders ONLY.

Location: Columbus, OH (must live locally or be willing to relocate)

ComResource is looking for a Senior Full-Stack Engineer to join our high-performing agile development team. In this role, you’ll work across all layers of complex software applications, contributing both as a hands-on developer and a collaborative team member.

As a senior engineer, you will lead key initiatives, help define engineering best practices, and support your peers through complex technical challenges. You’ll be the go-to expert for critical features and components, playing a central role in delivering technology solutions that are safer, more efficient, and more cost-effective.

Key Technologies: Java, Spring Boot, JavaScript/React, REST APIs, Cloud platforms (AWS preferred)

Essential Duties & Responsibilities:

Software Development

• Develop high-quality software features and components that integrate into complex solutions.
• Write code that is well-structured, readable, maintainable, testable, and performant using standard software craftsmanship techniques.
• Participate in sizing decisions and complexity evaluations for initiatives.
• Pair with other engineers and apply clean-code practices to produce high-quality work.

Testing & Quality Assurance

• Create comprehensive testing strategies, including performance, security, regression, and automation testing.
• Develop unit, integration, and automated acceptance tests based on requirements.
• Build automated tests for both positive and negative scenarios.
• Utilize test-driven development (TDD) to guide implementation and coach peers on TDD and testing best practices.

Data Management, Infrastructure & Integrations

• Define data storage and access strategies and make informed design decisions using knowledge of data modeling, storage, and transmission.
• Apply basic ML and data analytics understanding to maximize business value through data transformation.
• Design system integration strategies leveraging cloud and managed services.
• Utilize infrastructure-as-code concepts to design reusable modules, support container orchestration, and assist with data migration.

Operations

• Build highly dependable features and systems using operational best practices such as monitoring, logging, metrics, and system-health visibility.
• Advocate for and contribute to deployment automation and operational excellence.
• Manage build pipelines and write code to collect, monitor, and display key metrics.

Security & Compliance

• Develop software with a security-first mindset using knowledge of security protocols, secure coding techniques, and protection of sensitive information (including PHI).
• Proactively identify and mitigate potential security threats.
• Implement basic security safeguards and leverage threat modeling for system-level security.

Product & User Experience

• Build features with a strong focus on usability and user experience.
• Enhance user-facing applications, create reusable interaction patterns, and support UI/UX best practices.
• Translate design goals into functional, user-facing implementations.
• Address technical and design debt based on priority and impact.

Requirements & Design

• Collaborate with stakeholders to understand business context and communicate technical considerations.
• Write detailed technical stories that translate business needs into clear, actionable specifications.
• Apply architectural guidance to new challenges and make cost-effective feature design decisions.

Required Skills & Experience:

• Minimum of 6 years of professional software engineering experience
• Highly motivated, self-driven, and technically inquisitive, with a strong desire to learn and grow.
• Proficiency in one or more server-side programming languages (Java and Spring Boot preferred).
• Experience with one or more client-side programming languages (JavaScript and React preferred).
• Hands-on experience developing, deploying, and supporting REST services and microservices.
• Familiarity with cloud platforms for storage, compute, and infrastructure as code; experience with Kubernetes and AWS is preferred.
• Knowledge of relational and non-relational databases, along with messaging systems.
• Ability to positively influence team outcomes—mentors peers, contributes to decision-making, and drives innovation.
• Strong collaboration skills with business stakeholders; experience proposing product features to enhance product value is a plus.
• Excellent written and verbal communication skills.
• Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Information Systems, IT, or a related field; equivalent work experience will also be considered.

• 
  
• Establish and execute Audit/Surveillance Plans for SUBSAFE / Level I / Corporate Component Repair Program (CCRP), Modernization and Manufacturing contract work.
  
• Establishes basic Test and Inspection Plans for projects. Perform in-process work surveillances, safety surveillances and conduct final work-package review after work-completion.
  
• Performs internal audit of to monitor compliance with company procedures and performs external audits to evaluate supplier suitability for use. Develop trend analysis and reports.
  
• Prepares Corrective Action Requests, and Preventative Action requests as related to production work to ensure compliance with established policies, procedures and work instructions.
  
• Assists Program Managers, Project Managers, and Supervisors/Foreman in the understanding of NAVSEA Standard Item and other customer related requirements to ensure work is conducted accurately and safely.
  
• Assists in the development of written procedures for Safety, Hull, Mechanical, and Electrical Trades work and tasks
  
• Monitors compliance with company Quality and Safety Management Systems, Workmanship standards and Customer requirements.
  
• Develops safety, quality control and inspection procedures for inclusion in test and inspection plans for production Work-Packages.
  
• Defines test standards and specifies test equipment associated with requirements established in test and inspection plans.
  
• Schedules and Conducts Safety/Quality Assurance inspections, Audit and Surveillances.
  
• Performs Audits and evaluations of Suppliers/Subcontractors.
  
• Works with customer QA/Safety representatives to coordinate inspection and acceptance activities.
  
• Reviews QA/Safety control requirements with customer representative to assure compliance with requirements.
  
• Reviews contractually required quality/safety documentation for accuracy and completeness for project/job/contract completion.
  
• Maintain OQE records retention.
  

• High School GED Diploma or equivalent and specialized training and certifications in Quality Assurance with 10 years total waterfront experience with training and experience in Quality Assurance to include minimum 7 years extensive SUBSAFE/SOC Shipboard/CCRP quality oversight experience.

• 
  
• Bachelors Degree and 4 years waterfront SUBSAFE/SOC Shipboard/CCRP quality experience.
  
• Bachelor's Degree may be substituted with a completed Maritime Trade School / Apprenticeship with 5 years waterfront Quality Assurance experience OR 6 years' military service with specialized training and experience in Quality Assurance to include minimum 5 years extensive SUBSAFE/SOC Shipboard/CCRP quality oversight experience.
  

• 
  
• Must be able to obtain and maintain access to U.S Military bases and shipyards for performance of job duties.
  
• Must be able to obtain and maintain Secret Security Clearance.
  
• Pursuant to the various government contractual requirements, all applicants must be a U.S. Citizen.
  

• 
  
• Knowledge and experience in Submarine systems within SUBSAFE / SOC Boundary to include repair, overhaul, inspection and testing of shipboard systems.
  
• Knowledge and experience in Submarine Corporate Component Repair Program Assets (valves, actuators, hydraulic cylinders, etc.) to include repair, overhaul, inspection and testing of CCRP assets.
  
• Knowledgeable in shipyard, maritime, and commercial work practices, quality assurance, safety, Metal-work and contracting methods.
  
• Knowledge of Navy ship repair processes and procedures.
  
• Knowledge of OSHA Regulations for Shipyard Employment, NAVSEA Standard Items, Joint Fleet Maintenance Manual (JFMM), NAVSHIPS Tech Manuals (NSTM), SUBSAFE, DSS-SOC and DOD Standards, Military Specifications, Performance Standards, and other customer related specifications and standards
  
• Knowledgeable in all aspects of workplace Safety.
  
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
  
• Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
  
• Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective fabrication or manufacture and distribution of products.
  

• 
  
• Able to conduct audits and surveillances.
  
• Able to conduct tests and inspections of products, services, or processes to evaluate quality or performance.
  
• Effective written and oral communication skills.
  
• Able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
  
• Effective interpersonal skills and able to lead/teach others.
  
• Effective problem solving skills. Provides sound judgment and decision.
  
• Proficient in Microsoft Office programs including but not limited to Word, Excel, Power Point and Access
  

• 
  
• Able to understand written sentences and paragraphs in work related documents.
  
• Able to read structural, mechanical and electrical drawings.
  
• Able to anticipate problem and apply general rules to specific problems to produce answers that make sense.
  
• Able to generate or use different sets of rules for combining or grouping things in different ways.
  

• 
  
• Must be able to physically access ships, small craft, and submarines.
  
• Able operate in: confined Spaces, noisy environment, heavy Industrial conditions, high traffic areas, office environment, meetings and multiple locations.
  
• Able to Remain calm in: Stressful situations including; high pressure production schedule, strict workmanship requirements, customer interface, regulatory requirements.
  
• Able to lift, carry and move objects at least 25 lbs. in weight.
  
• Visual acuity and manual dexterity.
  

Everything we do is underscored by a why and that why is one another.

Location: Altru Clinic | Crookston 400 S. Minnesota St. Crookston, MN 56716 Pay Range: $20.75 - $31.12

Summary: The Medical Assistant answers the telephone and routes calls, prepares patients for exams and assists with procedures. This position identifies basic signs and symptoms of deviations from normal health status and provides basic information and reports to the nurse. The Medical Assistant assures lab work, tests, procedures and surgeries are scheduled and notifies pre-authorization and hospital of applicable cases.

Essential Job Functions:

• Answers telephone and directs calls as appropriate in a prompt manner. Prepares patients for exams and assists with procedures, per provider request.
• Reports the patient's self-report/symptoms of pain promptly according to standard operating procedure.
• Gathers and documents relevant information about the patient's visit using information from the patient/patient's family and previous medical records.
• Assures lab work, tests, procedures and surgeries are scheduled according to standard operating procedure. Follow standard operating procedures for pre-authorization and hospital of applicable cases.
• Identifies basic signs and symptoms of deviations from normal health status and provides basic information which licensed nurses use in identification of problems and needs.
• Administers medication using the 6 Rights and according to standard operating procedure.
• Demonstrate competency and ability to carry out department functions including location, set-up and use of equipment used for the assigned area.
• Performs other duties as assigned or needed to meet the needs of the department/organization.

• Medical Assistant Certified | American Association for Medical Assistants | Prior to Start Date | HR Primary Sources
• Medical Assistant Certified | National Heathcareer Association (NHA) | Prior to Start Date | HR Primary Sources
• Medical Assistant Certified | National Center for Competency Testing (NCCT) | Prior to Start Date | HR Primary Sources
• Medical Assistant - Registered | American Medical Technologist (AMT) | Prior to Start Date | HR Primary Sources
• Basic Life Support (BLS) | American Heart Association (AHA) | Within 90 days of Start Date | Learning Management System

• Prior to Start: Must be certified in one of the following: AAMA, NHA or NCCT or Registered with AMT.

Language Requirements: This position requires proficiency in reading, writing, and speaking English to ensure effective communication in the workplace and with patients, families, and team members.

Physical Demands:

• Sit: Frequently (34-66%)
• Stand: Frequently (34-66%)
• Walk: Frequently (34-66%)
• Stoop/Bend: Occasionally (5-33%)
• Reach: Continuously (67-100%)
• Crawl: Rarely (1-4%)
• Squat/Crouch/Kneel: Frequently (34-66%)
• Twist: Occasionally (5-33%)
• Handle/Finger/Feel: Continuously (67-100%)
• See: Continuously (67-100%)
• Hear: Continuously (67-100%)

Weight Demands:

• Lift -Floor to Waist Level: Medium (20-40 pounds)
• Carry: Medium (20-40 pounds)
• Push/Pull: Medium (20-40 pounds)
• Slide/Transfer: Medium (20-40 pounds)

Working Conditions:

• Indoor: Continuously (67-100%)
• Outdoor: Not Applicable
• Extreme Temperature: Not Applicable

Driving Requirement Definitions:

• Professional Drivers: Persons who drive as their main responsibility OR transport passengers or hazardous materials.
• Frequent Drivers: Persons whose main responsibility is not driving, but drive daily or almost daily.
• Occasional Drivers: Persons who drive from once per month to as frequently as once per week.
• Infrequent Drivers: Persons who are generally not expected to drive.

Driving Requirement for this position: Infrequent Driver

Making a real difference. For one another.

To take the best care of our patients and community including friends, family, and neighbors we need people who are committed to growth, excellence, and one another.

At Altru, you'll find a culture where support and teamwork are at the heart of what we do. You'll have opportunities to advance your skills, work with the latest technologies, experience the fulfillment that comes from giving back, and take your career wherever you want it to go.

Join our team and be a part of a small community with a big heart.

Altru offers a comprehensive benefits package to its full- and part-time employees. Excellent benefits include a health plan and 401(k) retirement plan. Other benefits include a dental plan, vision plan, life and disability insurance, education assistance, paid time off (PTO)

By clicking the "Apply" button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda's Privacy Notice and Terms of Use. I further attest that all information I submit in my employment application is true to the best of my knowledge.

Job Description

Please take this virtual tour to get a sneak peek of one of our Plasma Donation Centers.

Join Our Team as a Paramedic in Pittsburgh, PA!

Are you a compassionate EMT-Paramedic looking to make a real difference? We're looking for someone like you to join our team in Pittsburgh, where you'll work alongside dedicated professionals who share your passion for helping others.

At our organization, you'll find more than just a job—you'll find a supportive, fun, and mission-driven culture where your work truly matters. Whether you're just starting out or looking to grow your career, we offer a path forward with real opportunities for advancement, including leadership roles.

Here's what we offer:

• A diverse, welcoming culture where you're treated like family
• No overnight shifts! Enjoy a better work-life balance
• Benefits starting on Day 1—because you shouldn't have to wait
• Debt-Free Education – earn your degree with no out-of-pocket costs
• Paid Training to set you up for success
• Real opportunities to grow your career and move into management
• A chance to save lives and make an impact—without putting your own at risk

About the role:The Plasma Center Medical Support Specialist EMT - P is responsible for delivering safe and efficient quality nursing care to patients. This role involves examining patients, administering prescribed medicine, and facilitating healing and comfort. The position requires advanced knowledge of operational procedures and tools, obtained through extensive work experience and vocational or technical education.How you will contribute:* Work under limited supervision for non-routine situations* Lead daily operations and train, delegate, and review the work of lower-level employees* Examine patients and administer prescribed medicine* Ensure accurate patient records by documenting medical history* Apply patient safety protocols in care settings* Perform phlebotomy tasks such as blood draws following established guidelines* Conduct electrocardiography tasks, understanding basic operational procedures* Utilize medical terminology appropriately in patient care situations* Respond to medical emergencies following center SOPs* Assess donor eligibility based on medical history and physical examination findingsSkills and qualifications:* Applies basic principles of medical history documentation under supervision, ensuring accurate patient records.* Understands patient safety protocols and applies them under supervision in care settings.* Performs basic phlebotomy tasks such as blood draws under supervision, following established guidelines.* Conducts simple electrocardiography tasks under supervision, understanding basic operational procedures.* Utilizes medical terminology appropriately in routine patient care situations with guidance.* Maintains Basic Life Support certification, ready to respond to emergencies.* Prepares patients for medical procedures under supervision, providing clear instructions.* Inputs patient data into digital systems, ensuring accuracy and confidentiality.* Conducts patient interviews, handling basic inquiries with ongoing coaching.* Performs blood testing procedures, interpreting results under supervision.* Responds to medical emergencies, following center SOPs effectively.* Assesses donor eligibility based on medical history and physical examination findings.As the most advanced technical operations level within Takeda, you are in a non-supervisory position that calls for a profound understanding of technical processes within one's specialty. You typically hold a high school diploma complemented by extensive relevant working experience and any necessary certifications. You will be expected to anticipate trends, connect disparate information, and coordinate activities that may impact areas outside your immediate remit. In this capacity, you will handle complex assignments that necessitate a unique and specialized set of skills, leading not just the workflow but also ensuring the quality of technical processes. Your autonomous working style within established procedures empowers you to propose process enhancements and sometimes operate without predefined methods, guided by experience and organizational guidelines.

About BioLife Plasma Services

Every day, the donors you meet will motivate you. The high-quality plasma you collect will become life-changing medicines. Here, a commitment to customer service and quality is expected. You will report to the Plasma Center Manager and will perform as a Medical Support Specialist (Plasma Center Nurse) to support plasma center operations.

BioLife Plasma Services is a subsidiary of Takeda Pharmaceutical Company Ltd.

About the role:

Every day, the donors you meet will motivate you. The high-quality plasma you collect will become life-changing medicines. Here, a commitment to customer service and quality is expected. You will determine donor eligibility to donate plasma, management of donor adverse events, review of laboratory test results, and donor notification of unsuitable test results. The Medical Support Specialist (Plasma Center Nurse) works under the guidance of the Center Manager (or Assistant Manager as applicable) for operational guidance and under the management of the Center Physician for medical issues. The Medical Support Specialist will be familiar with regulations of the plasma collection industry or a manufacturing environment. The Medical Support Specialist follows guidance provided by BioLife Medical Affairs and provides center level support of environmental, health and safety (EHS).

How you will contribute

• You will determine donor eligibility; to include, proper management of informed consent, AIDS education and confidential self-exclusion, medical history interview and acceptance requirements, physical examination, blood testing, and reviewing Serological Protein Electrophoresis (SPE).
• You will evaluate donor reaction(s), which occurs at the facility as outlined in the SOPs. Follow applicable SOPs for medical emergencies including the development of Center Physician's standing orders and donor transport to emergency care facilities.
• You will refer to the Center Physician or Medical Affairs (as applicable) when in need of providing unacceptable findings to donors, or guidance concerning medical or technical issues, including donor safety and eligibility.
• You will support the Hepatitis B and Seasonal Flu vaccination programs for employees as applicable.
• You will manage employee incidents and determine whether further evaluation is required by occupational health/ER. Refer to EHS guidance regarding employee incidents.

• You can be a Pandemic Coordinator when authorized by EHS and support investigations associated with pandemic threats within the local community as indicated by EHS or Medical Affairs.

What you bring to Takeda:

• High school diploma or equivalent to including graduate equivalent of a recognized educational nursing program with state requirements
• Currently licensed or certified in the state where responsibilities will be assigned: EMT-Paramedic

• Current Cardiopulmonary Resuscitation (CPR) and AED certification
• Fulfill state requirements (in state of licensure) for basic IV therapy
• Satisfactorily complete the FDA approved training requirements for BioLife Medical Support Specialist
• Two years in a clinical or hospital setting

More about us:

At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work.

Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to bring Better Health and a Brighter Future to people around the world.

BioLife Compensation and Benefits Summary

About PFX™

We engineer leading fluid solutions that keep the world moving and we’re building a better future while we do it. As a vertically integrated global powerhouse, we operate 17 manufacturing facilities and 4 R&D centers across the world, delivering performance from lab to road in over 40 countries.

PFX Group™ brings together a family of trusted companies including Recochem, Prestone, Adam’s Polishes, B&B Blending, Kost USA, Ultra Clear, POR and Auto-Chem, each with deep expertise, regional insight, and a shared commitment to engineering excellence.

From automotive and heavy-duty thermal management systems to household and industrial solutions, our products are built for performance, reliability, and a commitment to sustainability. Join us and be part of a team that’s redefining what’s possible in fluid technology.

Job Summary:

We are currently seeking an applicant interested in a long-term position in the Cincinnati Technology Center CTC conducting analytical testing to support, production, product stewardship, and technical services growth. A person with 5 -10 years of experience in analytical laboratory testing is preferred. Job assignments are varied; thus, flexibility is essential.

As part of the Technical Services team, a Senior technician must be able to work on multiple services projects or Development test items simultaneously. Duties include but are not limited to running and troubleshooting and monitoring analytical laboratory testing equipment, conducting wet chemistry tests to evaluate automotive products, analyzing test results and reporting results with limited supervision. An interest in automobile and industrial fluid technology and application is highly desirable.

The Analytical Senior Laboratory Technician plays an integral role in technical services of the PFX Group/KOSTUSA. The responsibilities include the setup, testing, and documentation of analytical testing specifically liquid or gas chromatography, based out of the KOSTUSA, CTC Site. The Cincinnati Technology Center CTC Analytical laboratory performs ICP, IC, HPLC, GC, FT-IR and physical property testing on automotive, heavy duty, heat transfer fluid, Fire Resistant Hydraulic fluid (HFC type) and Gas dehydration. The Analytical Technician will be expected to run a variety of analytical tests in a demanding fast-paced environment with the internal Technical Services team as well as external partners to support the services, and solve problems based on the needs of the business.

Job Functions

Job assignments are varied, and flexibility is essential. Basic requirements include.

• Conducts activities following established Corporate and Site Safety procedures and notifies the Supervisor of any unsafe conditions or practices in the area.
• Prepares materials, sets up, and runs instruments and reports analytical test results.
• Operates physical, chemical, optical, and analytical equipment for samples submitted to the CTC Analytical laboratory.
• Responsible for instrument calibrations, verifications, and calibration standards
• Maintains instrumentation calibration reference standards
• Maintains instruments and coordinates annual PM’s, service calls, and service contracts
• Manages collecting and shipping samples for 3rd party analysis
• Records and tabulates data in laboratory notebook in legal form following defined procedures.
• Observes irregularities, unusual behavior, or trends in tests, and interprets causes.
• Performs troubleshooting on instrumentation when needed to diagnose and resolve issues.
• Communicates the results of work to Manager following prescribed procedures.
• Work with sample tracking database, including entering, reporting and logging out samples.
• Prepares periodic written reports.
• Other duties assigned.

Key Responsibilities

• Plan, schedule and carry out to completion, sample testing in accordance with CTC Management system with limited supervision. Communicates results, conclusions and recommendations in person and in formal written reports.
• Must be able to safely follow detailed Analytical test procedures, making observations, recording test data into spreadsheets and laboratory notebooks, and summarizing data into presentable form.
• Assist in the preparation of departmental documentation including Standard Operating Procedures, job safety analysis procedures and project technical reports. Support/design new and novel analytical test procedures/methods to support services.
• Ensure that samples are reported on time, meeting quality and turnaround targets.
• Answer technical enquiries related to your work accurately and quickly.
• Conduct research to stay up to date with analytical instrument trends and submit ideas for cost saving and new or improved test method opportunities.
• Drive improved standards of safety and housekeeping and Senior initiatives to improve laboratory practices.
• Ensure that all activities within the laboratory are risk assessed and documented.
• Possess good oral communication skills and a flexible approach to work. Conducts self in a professional manner and exerts a positive impact upon the morale and attitude of other team members.

Qualifications

• Minimum education required is Bachelors of Science degree level in chemistry or equivalent science with 5 – 10 years of experience in an analytical laboratory.
• Must be able to follow instructions, work independently and safely in a laboratory environment and work on several projects at the same time.
• Strong written communication skills are required.
• A background in analytical instruments, preferably within the consumer products industry, is a plus.
• Ability to work well with peers is required.
• Ability/desire to grow technically through continued education and learning is essential.
• Analysis to application experience

What We Offer

• Competitive compensation
• Career growth opportunities – we prioritize internal promotions
• Generous 401k match
• Comprehensive health benefits, including medical, vision and dental coverage and Telemedicine
• Paid vacation and holidays
• Tuition assistance program – support for continued education and professional development

Please note: A pre-employment background check, including a criminal record check and drug testing, is required.

PFX is proud to be an equal opportunity employer and is committed to fostering a diverse and inclusive workplace.

Position Description

Ryder is hiring a Senior Level Diesel Technician in Winston Salem, NC — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $28.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Tuesday through Saturday
  
  
• Hours: First Shift 7:00 am to 3:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Nick or text “Winston” to 9

to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/17/2026 10:06 AM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City WINSTON SALEM

Location (Posting Location) : Postal Code 27101

Category Technicians/Service Employees5

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NC-GREENSBORO | US-NC-Lexington | US-NC-Burlington

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $30.00/Hr.

Max Pay USD $30.00/Hr.