Basic Excel Test Answers Jobs in Usa
19,065 positions found — Page 5
- Day Shift General Summary The Run Test Technician 3 is responsible for performing final functional testing, verification, and troubleshooting of industrial gas compressors/processing skids and PLC control panels prior to shipment.
This role ensures equipment meets safety, performance, and customer specifications by conducting run tests, analyzing data, and working closely with engineering, production, and quality teams.
Principle Duties & Responsibilities : Conduct Functional Run tests on natural gas compressor packages and PLC-based control panels in accordance with company procedures and customer specifications.
Verify proper operation of engines, compressors, control systems, and instrumentation.
Set up test environments, including fuel, electrical, and control connections.
Operate and monitor compressors during start-up, load, and shutdown cycles.
Test and validate PLC control logic, safety interlocks, alarms, and shutdown sequences.
Record and analyze test data to ensure compliance with performance and safety standards.
Identify, troubleshoot, and resolve mechanical, electrical, and control system issues.
Collaborate with engineering teams to provide feedback on design improvements and test outcomes.
Maintain calibration, cleanliness, and readiness of test equipment and facilities.
Adhere to all safety standards, environmental regulations, and company quality policies.
Accountability Responsibilities : Ensure all testing procedures are conducted in compliance with company and industry safety standards Demonstrate leadership in implementing and maintaining the 5S program Complete and properly sign off the GPS Traveler for each module or project Maintain detailed test records, issue reports, and document any non-conformances or deviations Recommend improvements to testing procedures to reduce downtime and enhance product reliability Influence Responsibilities : Act as a technical resource and role model for peers and junior technicians Promote a culture of safety, quality, and continuous improvement across teams Influence cross-functional collaboration by sharing insights and driving alignment on testing standards and expectations Encourage proactive problem-solving and accountability throughout the testing and assembly process Coordinate with the Manufacturing Supervisor(s) on potential quality issues or delays to projects Provide Technical feedback to assembly and engineering on design issues or deficiencies.
Provide feedback to other Supervisors, Manufacturing Engineers, and other team members regarding potential process improvements.
Required Support : Assist Supervisors training new employees.
Ensure all testing procedures are conducted in full compliance with OSHA, company, and industry safety standards.
Provide directions to resolve project issues based on Engineering recommendations Approve initiation of unit testing as needed.
Collaborate with Engineering, Production, and Quality Control to resolve testing issues efficiently.
Qualifications: Minimum of 3-5 years of experience troubleshooting PLC control panels and/or operating Caterpillar and Waukesha engines.
Proficiency in interpreting engineering documentation, including P&lDs, General Arrangement drawings, and Electrical schematics.
Hands-on experience with Caterpillar and Waukesha engines.
Familiarity with Ariel and Dresser Rand compressors.
Strong analytical and problem-solving abilities.
Excellent verbal and written communication skills.
Demonstrate dependability, motivation, and self-direction.
High attention to detail and strong organizational skills Ability to work effectively with minimal daily supervision.
Capable of providing guidance and leadership to junior personnel as needed.
Working Conditions: Fast-paced general office environment.
Many tasks have high degrees of time sensitivity.
Domestic and international travel is possible on occasion.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema at (63 or) Vignesh Chinnaiyan at (224) 507-1296 Title: Test Method Validation Engineer Duration: 6 Months with potential to extend and convertion to FTE Location: San Diego, CA Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Shift Time
- 8 AM to 5 PM Overtime Hours: Possible Description: Meet the team: Join a dynamic and collaborative multi-disciplined engineering team at client.
We support the organization by standing up pilot manufacturing lines for new product development.
These manufacturing lines are intended to prototype, evaluate and validate product designs.
This role is crucial to develop the software systems which capture, store and view the data which is produced from the manufacturing line.
Where you come in: Develop test methods through Measurement System Analysis (MSA) and/or Gage Repeatability and Reproducibility (GRandR) methodology to assess and improve measurement reliability Lead Test Method Validation (TMV) activities including protocol development, execution, and reporting.
Create and release test fixtures or equipment including CAD, drawings, prototyping, fabrication and implementation into a manufacturing environment Plan and perform Design of Experiment (DOE) to characterize and determine optimal processing and/or test methods Design, document and optimize new manufacturing process/assembly steps and operating procedures for new stations, equipment, and processes within a regulated quality system.
Analyze data using statistical tools (JMP or Minitab) to evaluate method/process performance and identify areas for improvement.
Collaborate cross-functionally with RandD, Quality, and Manufacturing teams to ensure test methods meet product and business requirements.
Author and maintain validation documentation including protocols, reports, and risk assessments.
Looking for Mechanical system testing, leak, pressure testing, water-immersive system testing, and eventually Electromechanical testing is a must-have need.
Open to non-medical candidates; need to be a strong fit.
What makes you successful: Strong problem solving skills when validating both destructive and non-destructive test methods.
Highly familiar with vision-based metrology equipment Have a preventative mindset through anticipating potential problems.
Excellent written and oral communication skills.
Flexibility to occasionally work 2nd shift based on equipment availability.
Proficiency in statistical analysis software (e.g.
JMP, Minitab) Experience with project management tools such as JIRA, Confluence, Smartsheet Experience with MSA (Measurement System Analysis) or GR-R methodology will be required.
Experience with CAD is a must-have.
SolidWorks will be preferred.
Required Skills (top 3 non-negotiables): End-to-end Test Method Validation (TMV) or Gauge RandR Vision-based equipment for Dimensional Inspection Medical Device Industry Exp Preferred Skills (nice to have) Mechanical Tensile or Compression Testing (Instron) Statistical Data Experience JMP or Minitab Process Development (DOE) Overall Experience: Ideal will be 6-9 years; 4-5 years will be considered.
Software Skills Required: JMP or Minitab is preferred, but not required Education Requirements: BS in Mechanical Engineering or Bioengineering Number of Interviews: 2 rounds About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Medical Device, Test Method Validation, Gauge Randamp;R
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Scientist, Integration and Test Engineering (CITE)
Job Code: 33805
Job Location: Palm Bay, FL
Job Schedule: 9/80 (Every other Friday off)
Job Description:
The Chief Integration & Test Engineer (CITE) will oversee system verification and test planning for the integration of the spacecraft bus, mission payload, and communication payload, culminating in end-to-end testing. Responsibilities include leading a team of I&T engineers through the product life cycle, from initial requirement analysis for testability to designing and developing test plans and flows. Additionally, this role involves defining, planning, and implementing strategies for test, verification, validation, qualification, and acceptance testing.
Essential Functions:
Provide mastery-level system integration and test engineering expertise to a team.
Lead space hardware and software integration and verification testing at acceptance, proto-flight, and qualification levels for all relevant environments (vibration, thermal, vacuum)
Develop verification plans, test procedures, and test flows, and lead the execution of test procedures.
Document test results in reports to ensure system requirements are met.
Lead requirements verification for components, subsystems, and systems.
managing the Test Bed and Simulators used during integration and test activities.
Identify and resolve technical issues and anomalies during integration and testing, collaborating with cross-functional teams to address discrepancies.
Collaborate with cross-discipline teams (systems, mechanical, structural, thermal, power, optical, RF, electrical) in development, integration, and execution.
Represent Space Integration & Test engineering during major system level design reviews including System Requirements Review (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), and Pre-Shipment Review (PSR)
Qualifications:
Bachelor's Degree and a minimum of 12 years of engineering experience. Graduate Degree and a minimum of 10 years of engineering experience. In lieu of a degree, a minimum of 16 years of engineering experience
Experience with system-level space requirements verification, including allocation, testability, flow down, analysis, testing, and demonstration.
Experience executing all phases of space vehicle programs (SRR, PDR, CDR, IRR, TRR, PSR, etc.)
Experience with space hardware/software integration, testing, and troubleshooting
Experience with Flat Sats and simulators
Secret Clearance
Preferred Additional Skills:
Technical leadership experience in an SI&T role
Experience designing Mechanical Ground Support Equipment (MGSE) and/or Electrical Ground Support Equipment (EGSE) for large space vehicles.
Strong understanding in space vehicle subsystem designs: Power, Thermal, Communications (Optical or RF), Data Management, Structures, Mechanisms, GNC, Propulsion, Configuration/Packaging, Software, Fault Management, Harness
Proficiency with Interface Definition Documents (IDDs) and Interface Control Drawings (ICDs)
Expertise in requirements management, traceability, and verification using IBM Rational DOORS and MBSE tools (CAMEO)
Experience directly interfacing with customers (both prime contractors and end customers) to resolve technical issues during the development and sell-off of space hardware.
Experience in risk management
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Duration: 6 months
Location: 5525 Morehouse Drive, San Diego, CA 92121
Job Description
Principal Duties and Responsibilities:
Level of Responsibility:
* Works under close supervision.
* Responsible for own work. Decision-making is limited. Impact of decisions is readily apparent. Errors made typically only impact timeline (i.e., require additional time to correct).
* Requires verbal and written communication skills to convey basic, routine factual information about day-to-day activities to others who are fully knowledgeable in the subject area.
* Some tasks require multiple steps which must be performed in a specific order; directions or manuals can accurately document the steps necessary to perform the task.
* Some creativity may be required to troubleshoot technical problems or deal with novel circumstances.
* Limited problem solving required, generally in the nature of troubleshooting simple processes or technology.
The responsibilities of this role do not include:
* Does not provide supervision to others.
* Does not have financial accountability.
* Has no influence over key organizational decisions.
* Does not have a role in strategic planning
Top 5 Required Skills
1. Experience with Debugs and troubleshoots
2. Set-up of specialized test equipment experience
3. Problem solving and troubleshooting simple processes or technology experience
Technologies
* MTeams
Keywords
* debugging
* troubleshooting, testing
Education Requirement
* High School Diploma or equivalent.
Min Years of Experience Required
* 1+ year of semiconductor, RF testing, or related work experience
Physical Requirements
* Pushing Weight Limit = 25
* Pulling Weight Limit = 25
* Lifting Weight Limit = 25
* Forklift Required (Y/N): No
Driving Requirements
* Are there driving responsibilities no matter how minimal with this role? No
* If yes, how many hours per week? N/A
With a passion for life
Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.
Are you looking for an inspiring career? You just found it.
Job Overview
The R&D Test Engineer is responsible for being the lead in development of test methodology and test plan development supporting the verification and validation testing for medical devices, including improvements. This position will also support the authoring and execution of test protocols. This position is an individual contributor role.
Job Responsibilities and Essential Duties:
- Translate Design Requirements into Design Verification and Validation (V&V) Testing
- Own Test Method Validation (TMV) for novel testing approaches
- Design test setup and methodology for product testing
- Own novel complex protocol development
- Lead test failure investigations and document deviations
- Chair cross-functional reviews for protocols, test reports, and deviations
- Research different test methods and standards
- Advise and support improvements to verification and validation SOPs and tools
- Write work instructions, protocols, reports
- Perform other product development and laboratory tasks on an as-needed basis
Required Knowledge, Skills and Abilities:
- Meet the qualifications of the job through education, training, or prior experience
- Experience with current industry practices for performing and documenting verification
- Ability to communicate within the discipline and with others who are perhaps not as technically trained
- Ability to work collaboratively with others and share deliverable responsibilities among the team
- Work in an organized, methodical manner
- Excellent written and oral communication skills
- Adequate computer skills (Microsoft Office Suite)
- Able to take precise measurements
- Able to solve problems
- Able to troubleshoot
- Able to analyze & interpret data
Minimum Requirements:
- Bachelor's degree in R&D or Engineering preferred
- 3-5 years' experience in R&D or related field
Quality Requirements:
Build Quality into all aspects of their work by maintaining compliance with all quality requirements.
- Ensure compliance with all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
- Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
- Attend all required Quality & Compliance training at the specified interval.
- Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
Environmental/Safety/Physical Work Conditions:
- Use of computer and telephone equipment and other related office accessories/devices to complete assignments
- Able to lift to 15 lbs.
- Ability and willingness to travel to outside test labs to execute/support any offsite lab testing activities
- Wear face masks and PPE wherever required.
- Integrate environmental considerations into all aspects of work and maintaining compliance to all environmental, health, and safety requirements
- Ensure review of all processes and activities for potential environmental improvements and implement necessary changes as applicable to the job function.
- Must have general understanding, at a minimum, of Getinge Environmental Policy.
- Consider environmental legislation and regulations as a minimum requirement
- May require sitting or standing for long periods of time depending on the project.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
$90,000-$105,000/annually + 4% STIP
#LI-LG1
About us
With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.
Benefits at Getinge:
At Getinge, we offer a comprehensive benefits package, which includes:
- Health, Dental, and Vision insurance benefits
- 401k plan with company match
- Paid Time Off
- Wellness initiative & Health Assistance Resources
- Life Insurance
- Short and Long Term Disability Benefits
- Health and Dependent Care Flexible Spending Accounts
- Commuter Benefits
- Parental and Caregiver Leave
- Tuition Reimbursement
Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.
**Be visionary**
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.?
We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.
**Job Description**
We are seeking a dynamic **Sales Engineer (SE)** to drive business growth for our **Ethernet Test and Analysis Solutions** in the Americas. This individual will be responsible for identifying, developing, and closing sales opportunities for Teledyne LeCroy's **Xena** and **SierraNet** product lines within data center, semiconductor, and networking equipment markets.
The ideal candidate is a technically strong, customer-focused professional with a proven track record selling **Ethernet, Layer 1-3 test, or network analysis equipment** . You'll collaborate closely with Field Application Engineers, Product Management, and global Sales Leadership to meet revenue goals and strengthen strategic customer relationships.
**Key Responsibilities**
+ Develop and execute strategic account plans to achieve sales targets within assigned territory.
+ Engage with design, validation, and test engineering teams at leading semiconductor, system, and network OEMs.
+ Present and demonstrate Teledyne LeCroy's Xena traffic generators, Chimera impairment emulators, and SierraNet analyzers to both technical and executive audiences.
+ Manage the full sales cycle - from lead qualification and technical proof-of-concept to quotation, negotiation, and close.
+ Collaborate with inside sales and marketing teams to build pipeline and drive regional campaigns.
+ Provide customer feedback to Product Management for roadmap alignment and feature prioritization.
+ Represent Teledyne LeCroy at industry events, conferences, and technical workshops.
**Required Qualifications**
+ **Bachelor's degree** in Electrical Engineering, Computer Engineering, or related technical field.
+ **5+ years of experience** in technical sales or applications engineering within the **test & measurement** or **network equipment** industry.
+ Proven experience selling **Ethernet, Layer 1-3 test equipment, BERTs, traffic generators, or analyzers** (e.g., Keysight, Viavi, Spirent, EXFO, etc.).
+ Strong understanding of **Ethernet protocols, PHY/SerDes, and Layer 1-3 technologies** (100G, 400G, 800G, 1.6T).
+ Ability to engage both technically and strategically with engineers, managers, and executives.
+ Excellent communication, presentation, and interpersonal skills.
+ Self-motivated and organized, with the ability to work independently in a regional role.
**Preferred Qualifications**
+ Familiarity with **CMIS, RS-FEC, PAM4, AN/LT, or coherent optics** test methodologies.
+ Existing relationships with key accounts in the **San Francisco** **Bay Area semiconductor or networking ecosystem** .
+ Experience with CRM tools (Dynamics 365 or Salesforce).
**Why Join Us**
+ Be part of a global leader shaping next-generation Ethernet and protocol test technologies.
+ Work with cutting-edge solutions supporting 400G-1.6T, coherent optics, and advanced network architectures.
+ Competitive base salary, uncapped commission, and comprehensive benefits.
+ Collaborative culture with global technical and sales support.
**Salary Range:**
$150,400.00-$200,500.000
**Pay Transparency**
The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position.
Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.
Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. ?
You may not realize it, but Teledyne enables many of the products and services you use every day **.**
Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.
From fewer hassles and better pay to flexible home time, were creating a more empowering and rewarding driving experience.
- Earn 54 - 64 CPM*
- Top 20% of our OTR Drivers earn $1,450 - $2,100+ weekly
- Average 2,000 miles per week
- Choose home time that works for you!
- Sign-on bonuses available in limited areas*
- Newer trucks averaging 18 months
- Convenient home base terminals
- 401(k) match + stock purchase plan
- Health, dental, & vision Insurance with prescription benefits for employees and dependents
At U.S. Xpress, were driven to safely provide creative and reliable freight solutions while cultivating a workplace where our people thrive. Whether youre a shipper, driver, or part of our support team, were committed to safety, integrity, empowerment, and tenacity in all we do.
- Paid orientation
- Short-term & long-term disability insurance
- Basic & supplemental life insurance
- Accidental Death & Dismemberment insurance
- Accident insurance
- Hospital Indemnity & Critical Illness coverage
- Health Care & Flexible Spending accounts
- Paid vacation after 1 year
- Employee assistance program
- 24/7 driver support
- Tuition reimbursement
- Pet insurance
- Must have Class A License (CDL A)
- Must be 21 years or older
- 3 months of verifiable experience
- No more than 2 CMV on-road preventable accidents
- No major CMV preventable accidents in the last 5 years
- No more than 2 moving violations
- No DUI/DWI within the past 5 years, or 10 years if the offense occurred while holding a CDL
- Must be able to pass a DOT physical and drug test. No drug-related conviction within the past 5 years, or 10 years if the offense occurred while holding a CDL. No positive/refused tests in the past 10 years with CDL-A/CLP
- SAP drivers are not eligible for hire
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Plan, write, and execute manual, CMM, and Vision System inspections
- Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
- Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
- Document and record inspection results and properly file hard and electronic copies
- Interpret drawings and schematics.
- Initiate nonconformance reports (NCR's) for all nonconforming material.
- Perform inspections using the microscope.
- Perform first-article reports using various inspection tools.
- Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
- Uphold the company core values
- Other duties as assigned
SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following:
- Must have the knowledge and experience necessary for the position.
- Must be able to follow instructions and procedures and work with minimal supervision.
- Must be capable of reading drawings and inspecting the work being performed.
- Strong understanding of GD&T.
- Manual and/or CMM inspection experience.
- Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
- Practical knowledge of Microsoft Office (Word, Excel, Outlook).
- Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
EDUCATION and/or EXPERIENCE:
- High school diploma or general education degree (GED)
- Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions.
MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environments, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required.
NOTE: This job description identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems Inc. This job description is subject to change based on the needs of the position and/or the company.
Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who:
- Is not a United States citizen
- Is not lawfully admitted for permanent residence in the U.S.
- Does not have politically protected status (embassy, refugee, or asylum)
- Has dual U.S. / foreign citizenship
Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer
*****CONTRACT ROLE*****
*****CONTRACT ROLE*****
*****CONTRACT ROLE*****
Role : UAT Test Lead
Location : Austin, TX (5x/ week onsite)
Job Description :
8+ years of experience managing User Acceptance Testing (UAT) as a test lead for complex, highly integrated projects
Understanding of sales and sales operations processes in consumer channel sales or similar environment is highly preferred
Well versed in multiple styles of Release and Change Management processes including Agile/Scrum, Waterfall, and Iterative; Experience in an Agile environment is a must
Hands-on experience with Salesforce platform is preferred
Understanding of test automation framework design models and best practices
Solid understanding of project management approaches, tools and phases of the project lifecycle
Strong verbal and written communication skills with the ability to communicate at all organizational levels
Ability to facilitate brainstorming sessions to gather lessons learned from implementation with business and BPR, and Information Technology group (IS&T)
Excellent teamwork and ability to influence others (horizontally and vertically) to instill accountability to achieve results
Experience working on projects for teams based outside the U.S.
Strong level of customer focus and attention to detail
Ability to thrive in an ambiguous environment and multi tasking
High level of professionalism, energy and sense of urgency to "make things happen"
In this role, you will :
- Facilitate successful release of system enhancements / new functionalities from development to production
- Create Release processes and documentation to minimize customer impact during changes
Management of end to end UAT activities including test process management, team coordination and communication of test results
- Lead cross-functional team to support each Release project plan and post Release/Change review and coach other PM's
- Work closely with project team to understand business requirements
- Review requirements documents to ensure that requirements are testable
- Develop test strategy, test plans, test cases, test scripts and test reports on multiple projects of varying size
- Create and maintain the test data for UAT scripts.
- Create, maintain, and report UAT metrics including SLAs and KPIs
- Validate that user expectations are achieved during the testing process
- Document and communicate UAT related risks to Project Management
- Coordinate smoke testing, facilitate sales environment planning and PROD refreshes, and review master data flows
- Facilitate triage calls and drive issues to resolution with IS&T and business partners to get closure on open issues
- Create and maintain overall UAT knowledge repository for the BPR team
- Provide UAT best practices and templates; Incorporate lessons learned to improve test planning and execution
Note : If you are interested please share me your resumes to or else reach me at 4804076920.
System Integration Test Lead
Summary:
We are seeking a Technical Program Manager (TPM) with system-level experience to tackle new challenges and leverage your expertise in this dynamic role. This company offers a fast-faced, innovate culture with abundant information, requiring you to quickly process and develop clear plans to resolve issue efficiently.
Be part of a leading consumer technology company and make a significant impact by leading programs and driving manufacturing test readiness!
Responsibilities :
- Oversee the preparation and execution of test readiness activities, including managing the transition from Surface-Mount Technology (SMT) to final assembly across all phases of product New Product Introduction (NPI) development.
- Plan, execute, and complete dry runs to ensure manufacturing test readiness for NPI builds, identifying potential issues before full production.
- Quickly identify, troubleshoot, and resolve any test-related issues that arise during the build process, ensuring minimal disruption and maintaining timelines
- Create and implement strategic plans for addressing problems, ensuring timely and effective solutions.
- Work closely with engineering, manufacturing, and other cross-functional teams to ensure seamless communication and alignment on project goals and deliverables
- Regularly track and report on the status of test progress, readiness, and outcomes, ensuring transparency and accountability throughout the project lifecycle
- Continuously refine and improve test processes and methodologies to enhance quality, efficiency, and product maturity, ensuring compliance with industry standards and best practices
- Ensure product test quality standard and manufacturing criteria are met
Requirements
- Proven experience in program management or test readiness at the system level, with a strong background in hardware and software integration
- Understanding of HW/SW architecture and interoperability of a complex systems
- Strong analytical and problem-solving skills, with the ability to thrive in a fast-paced environment
- Excellent communication and organizational skills, with the ability to articulate complex issues clearly
- Knowledge and experience in New Product Introduction (NPI) for consumer products, enabling efficient issue resolution and build execution
- Experience in consumer product manufacturing tests and hardware/software integration is a plus
- Engineering degree in ME, CE, EE or Physical Sciences prefer
Location: Cupertino, CA (Hybrid, Tuesdays - Thursdays Onsite)
Duration: 12-36+ Months
Pate Rate Range: $70/hr - $80/hr (DOE)
