Automatic Controls Equipment Systems Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

BEPC Inc. provides Specialized Engineering Solutions and IT Project Management services to Fortune 500 companies in the Life Science and Technology industries. BEPC Mexico, a division of BEPC Incorporated, provides and manages consulting services for Automotive and Medical device companies throughout Mexico and around the globe.

The Senior Automation & Controls Engineer is responsible for leading the design, development, implementation, validation, and continuous improvement of automated equipment and control systems. This role combines strong technical expertise in PLC-based automation, electrical and pneumatic systems, equipment validation, and project leadership within regulated manufacturing environments, preferably in the medical device industry.

KEY RESPONSABILITIES:

• Lead and manage electrical and control system projects, ensuring alignment with scope, budget, and schedule.
• Design, develop, program, and troubleshoot PLC-based control systems (Allen-Bradley, Siemens, Keyence, Beckhoff, Schneider).
• Develop and implement HMI/SCADA applications (FactoryTalk View, Aveva Edge, Ignition, TIA Portal, etc.).
• Integrate VFDs, servo systems, motion control, robots (e.g., Mitsubishi), and machine vision systems (Cognex, Keyence, DataMan).
• Participate in the design and implementation of new automated equipment and capacity expansion projects.
• Execute and oversee Factory Acceptance Tests (FAT), User Acceptance Tests (UAT/BUAT), and internal testing activities.
• Lead and support equipment validation activities (IQ, OQ, PQ) in compliance with FDA and ISO 13485 standards.
• Ensure proper integration with Manufacturing Execution Systems (MES) and Warehouse Control Systems (WCS), when applicable.
• Generate and maintain technical documentation, including BOMs, electrical schematics, panel layouts, validation protocols, and reports.
• Perform advanced troubleshooting of electrical, pneumatic, mechanical, and control systems.
• Oversee preventive and corrective maintenance strategies to improve equipment reliability and efficiency.
• Collaborate cross-functionally with Manufacturing, Quality, R&D, Maintenance, and external stakeholders.
• Provide technical leadership, delegate tasks effectively, and mentor junior engineers and technicians.
• Support continuous improvement initiatives focused on efficiency, safety, and process optimization.
• Ensure compliance with safety and regulatory requirements in regulated manufacturing environments.

QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, Mechatronics, Automation, Mechanical Engineering, or related field.
• 7+ years of experience in industrial automation and controls engineering.
• Strong expertise in PLC programming (Allen-Bradley, Siemens; others desirable).
• Advanced knowledge of electrical controls, schematics, and pneumatic systems.
• Experience with servo systems, VFDs, motion control, and robotics integration.
• Experience in executing FAT, UAT, and equipment validation (IQ/OQ/PQ).
• Proficiency in AutoCAD / AutoCAD Electrical.
• Strong troubleshooting skills in automation and manufacturing systems.
• Ability to manage multiple concurrent projects.
• Upper-intermediate to advanced English proficiency (written and spoken).
• Availability to work on a 2–3 month fixed-term contract.
• Authorized to work in the location where the position is posted. Be a U.S. Citizen, Permanent Resident, or hold a valid TN Visa.

PREFERRED QUALIFICATIONS:

• Strong project planning, budgeting, and stakeholder communication skills.
• Experience in warehouse automation, material handling, or the post/parcel sector.
• Knowledge of networking protocols (Ethernet/IP, Profinet, Serial).
• 3+ years of experience in regulated environments (medical device preferred).
• Experience with MES/WCS integration.
• Familiarity with FDA regulations and ISO 13485.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Our client in Grand Rapids is seeking a skilled Controls Technician to join their growing team in a hands-on, high-impact role. This is a great opportunity for a technically inclined professional with strong electrical and automation experience to take ownership of critical systems within a fast-paced, manufacturing environment. The successful candidate will focus on installing, programming, troubleshooting, and maintaining control systems for all test and assembly equipment on-site.

This is a Night shift position with a 6PM-6AM schedule on a '2-2-3 schedule' (2 days on 2 days off, 3 days on etc.- rotating with every other weekend off. 60hrs one week, 24 the next. 1.5x pay for overtime! )

If you're passionate about automation, eager to roll up your sleeves on a variety of challenging projects, and thrive in environments where continuous improvement is the norm, this role could be the perfect fit.

Responsibilities:

• Install, program, test, and calibrate control systems and related hardware/software for assembly and test equipment
• Perform preventative and corrective maintenance on all test and assembly equipment
• Troubleshoot and repair electrical and electronic equipment including programmable controls, drives, power supplies, and PLC systems
• Improve automation processes, optimize equipment utilization (OEE), and reduce downtime through continuous improvement initiatives
• Collaborate with external vendors on equipment upgrades, repairs, and sourcing
• Start up and shut down machinery in alignment with company safety and OSHA protocols
• Advise operators and fellow technicians on safe and efficient equipment operation
• Interpret electrical schematics, engineering drawings, and specifications for troubleshooting and maintenance
• Manage small-scale automation projects independently from concept through implementation
• Ensure compliance with local and national electrical codes
• Maintain documentation and communicate potential issues to leadership
• Support cross-functional teams and contribute to a positive team environment

Qualifications:

• High school diploma or equivalent required
• 2+yrs of experience in troubleshooting and repairing control systems and automated equipment
• 2+yrs of PLC and HMI programming
• Familiarity with industrial electrical codes and safety practices
• Ability to read and interpret schematics, blueprints, and engineering documentation

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Avantor | NuSil is looking for a Quality Control Supervisor to join our team supporting manufacturing of high-purity silicone products. In this role you will provide leadership, technical, and strategic guidance, supporting quality operations for chemical manufacturing in an ISO 9001 and AS9100 certified environment.You will also drive and engage with continuous improvement activities to support the QC lab and overall business objectives.

This role will be a full-time, 2nd shift: 3:00pm - 11:30pm, onsite position based out of our Carpinteria, CA facility.If you are a transformative leader seeking an exciting opportunity to drive quality initiatives - let's talk!

What we're looking for

• Education: High School completion or equivalent (GED) is required; Bachelor's degree in Biology, Biochemistry, Chemistry or science related field is highly preferred
• Experience: 3 years of related/applicable lab or manufacturing experience is highly preferred
  • A proven leader, in a manufacturing and QC lab environment, that can contribute to maturing Quality functions, systems and risk-based processes to achieve business objectives
  • A quality, compliance, and business minded individual that values a growth mindset, partnerships, and collaboration
  • Excellent communication, interpersonal and people management skills
  • Demonstrated knowledge on the application of regulated quality and production risk-based processes
  • Strong analytical and problem-solving skills
• Collaboration Tool: Familiarity with MS Office (Word, Excel, Access)
• Preferred Qualifications:
  • Minimum 1 year of supervisory experience and/or leading a team
  • Preferred experience in quality systems, quality assurance, and quality control
  • Experience with a regulated ISO 9001 and/or AS9100 manufacturing environment

How you will thrive and create an impact

• Directly supervises the quality control staff, monitor individual skills and abilities for most efficient operation; follow progress of work; anticipates or investigates delays of inadequate performance; take corrective action within limits of established practice; aid other departments as needed.
• Provides on the floor and technical support to quality control associates
• Support and enforce the quality system, regulatory policies and work instructions.
• Maintain quality and quantity of output; arrange for equipment, materials and supplies to be available for work assignments; see that equipment is given proper care; troubleshoot faulty operations to determine cause and arrange for required repair and maintenance.
• Provide or arrange for training and cross-training to employees in the performance of duties; assist and instruct personnel as necessary to insure proper flow of work through department.
• Provide guidance to all level Technicians including test methods, analytical technique, good laboratory practice, paperwork completion, equipment, schedule interpretation, and LIMS support.
• Review and approval of controlled Quality Control documents including but not limited to: specifications, procedures, work instructions, validation protocols and validation reports.
• Ensure department documents and procedures are up to date and reflect current practice; revising procedures & processes when needed.
• Performs investigations for laboratory out of specification results, safety related incidents and/or processes related to the QC laboratory.
• Work with customers, regulatory agents and vendors during audits and site visits.
• Understands regulatory requirements for 21 CFR820, ISO 17025, EXCiPACT, GLP, GMP including USP/EP general practices and procedures.
• Proactively maintains current industry and regulatory knowledge for medical devices, ISO 17025, GMP principles and current analytical technology.
• Assist in determining priority of urgent items and appropriate action plan to effectuate priority.
• Approve rejections and rework actions as recommended by Quality Control Technicians.
• Enforce prescribed safety rules and regulations; insure that work areas are maintained in a neat and orderly condition; perform safety and security procedures to open and close buildings and facilities.
• Performs other duties as assigned.

KNOWLEDGE SKILLS AND ABILITIES (Those necessary to perform the job competently)

• Strong interpersonal and organizational skills
• Ability to work in a team environment
• Ability to identify and resolve issues
• Strong decision making skills
• Ability to lead a team and provide guidance
• Strong attention to detail
• Strong communication skills

ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions)

Typically works in a lab environment with adequate lighting and ventilation and a normal range of temperature and noise level. At times, may be exposed to a variety of different chemicals including flammables, corrosives, oxidizers and others.

Work assignments are diversified. Examples of past precedent are used to resolve work problems. New alternatives may be developed to resolve problems.

A frequent volume of work and deadlines impose strain on routine basis.

Minimal physical effort is required. Work is mostly sedentary but does require walking, standing, bending, reaching, lifting or carrying objects that typically weigh less than 10 lbs.

#LI-Onsite

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing is seeking a Senior Systems Integration Certification Engineer to lead regulatory and airworthiness compliance activities for the Systems Integration team on the 777-9 program.

The Systems Integration Certification team works closely with systems focals, equipment managers, and other stakeholders to drive integration and execution on key deliverables to enable certification testing and readiness for program milestones.

This role will play an exciting part in helping achieve 777-9 type certification by leading preparation and submission of certification artifacts, shaping certification strategy, and coordinating cross-functional activities to demonstrate airworthiness.Position Overview:Prepare certification documents and artifacts for submission to Regulatory Administration and FAA stakeholders; ensure artifacts are complete, traceable, and aligned to applicable requirements.Lead collaboration with internal and external stakeholders (including system focals, equipment managers, ALIT, Reg Admin, and program IPTs) to define artifacts, validate compliance, and document airworthiness and regulatory complianceCollaborate with system focals and equipment managers to compile certification documents required to achieve program milestones and achieve type certification.Integrate cross-functionally within the Systems IPT and with stakeholders across the program to define framework, strategy, criteria, and content to satisfy regulatory guidance and achieve certification milestones.Review regulatory requirements and evaluate impacts to products and schedulesLead development of compliance documents and other artifacts that establish airworthiness and safetyLead a team of individual contributors: coordinate daily work, communicate status and help needed, align priorities to key milestones, and articulate constraints and resource needs as they arise.Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience in aerospace certification, regulatory compliance, or systems integration with progressively increasing responsibility.

Demonstrated experience preparing certification documents and artifacts for submission to regulatory authorities (FAA and/or equivalent), and ensuring those artifacts meet regulatory expectations.

Strong cross-functional collaboration and communication skills Experience reviewing regulatory and customer requirements and evaluating impacts to products, systems, and services Experience leading and coordinating the day-to-day work of individual contributors Strong technical writing, problem-solving, and communication skills; demonstrated ability to present technical positions to leadershipPreferred Qualifications (Desired Skills and Experience): Master's degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Familiarity with FAA, EASA, and other international regulatory frameworks, advisory material, and airworthiness standards Experience leading certification efforts for integrated systems (avionics, flight controls, propulsion, mission systems) across large-scale programs Experience working in a global regulatory environment and leading cross-cultural teams Experience using compliance management tools and document control systems to compile and track certification artifactsDrug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range : $141,100
- $190,900 Applications for this position will be accepted until Mar.

21, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Industry: Pharmaceuticals

Title: Quality Control Analyst III

Job ID: NORT000022

Location: Norton, MA

Duration: 10 months contract (+Possibility of extension)

This position is onsite and will be primarily located in Norton, MA. There may be occasional responsibilities at a secondary location in Cambridge, MA.

Overview

The Quality Control Operations (QCO) LEQ Analyst III plays a crucial role in supporting the department's efforts to maintain the highest standards of quality and compliance from development through to commercialization. This position is responsible for supporting and executing laboratory equipment qualification activities in compliance with USP and applicable regulatory requirements. This role ensures laboratory instruments are fit for intended use throughout their lifecycle and supports data integrity, compliance, and continuous improvement within the laboratory quality system. By ensuring these critical activities are executed with precision, the LEQ Analyst III significantly contributes to routine laboratory operations, thereby enhancing the overall efficiency and effectiveness of the QC functions .

Key Responsibilities (including but not limited to):

• Perform and support laboratory equipment qualification activities, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) in accordance with USP .
• Classify laboratory instruments (Groups A, B, and C) and determine appropriate qualification strategies.
• Review and approve qualification protocols, test scripts, and reports.
• Support equipment lifecycle management, including calibration, maintenance, requalification, and change control.
• Review vendor documentation (URS, manuals, certificates) to support qualification and compliance.
• Investigate and document deviations, discrepancies, and out-of-tolerance events related to equipment performance.
• Ensure qualification activities comply with internal SOPs, cGMP, data integrity principles, and regulatory expectations (e.g., FDA, EMA).
• Collaborate with laboratory staff, quality assurance, validation, facilities, and vendors to resolve equipment-related issues.
• Maintain accurate and complete documentation in electronic quality systems.
• Support audits and inspections by providing qualification documentation and technical explanations as needed.
• Adhere to internal standards, policies, and SOPs, as well as regulatory and industry standards (e.g., GMP, GLP, ICH guidelines) to maintain the highest levels of quality and compliance.
• Actively participate in continuous improvement efforts by identifying and suggesting enhancements to laboratory processes, particularly those related to efficiency and reliability.
• Actively participate in continuous improvement initiatives aimed at enhancing QC processes and procedures, increasing laboratory efficiency and effectiveness.

Qualifications

• B.S. in chemistry, biology, or biochemistry, or related scientific field ;
• Pharmaceutical/Biotech industry experience with 6-10 years in a GMP Quality Control function or equivalent, relevant industry experience
• Hands-on experience with laboratory equipment qualification in a regulated environment.
• Strong working knowledge of USP and laboratory instrument lifecycle management.
• Familiarity with cGMP, GLP, and data integrity requirements.
• Experience with common laboratory instruments (e.g., HPLC, GC, balances, dissolution, UV/Vis, pH meters, spectrometers).
• Ability to write clear, compliant technical documentation.
• Strong organizational skills with the ability to manage multiple tasks simultaneously and autonomously
• Excellent communication and teamwork abilities, capable of working effectively in a collaborative environment
• Experience in pharmaceutical, biotech, or contract testing laboratory environments.
• Exposure to computerized systems validation (CSV) as it relates to laboratory instruments.
• Familiarity with calibration and maintenance programs.
• Experience supporting regulatory inspections or internal audits.

$95,000 – $130,000 Depending on Experience plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability

RemX is seeking a Controls Engineer to design electrical systems, develop PLC/HMI software, and support automated packaging equipment for a global OEM. The ideal candidate will have experience with PLC programming, electrical schematics, panel design, and supporting equipment startup and troubleshooting. This role offers the opportunity to work with advanced automation technology and contribute to high-performance packaging machinery used worldwide.

Note: This position requires 10% travel

• $95,000 – $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability
• 3+ years of PLC/HMI programming and electrical design experience
• Work with automated equipment used in advanced packaging and processing systems
• Join a global OEM known for innovation, technical depth, and long-term employee development

The Company:

• Over 50+ year-old OEM manufacturing company of high-precision machinery, particularly for the industrial automation and manufacturing industries
• Become part of a team-focused technical group that values collaboration and teamwork
• Excellent Compensation: $95,000 – $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability

The Position:

• Design and develop PLC, HMI, servo, and motion control programs for automated packaging machinery (Rockwell, Siemens, B&R)
• Create and update electrical schematics, control panel layouts, and power distribution designs using AutoCAD Electrical
• Support equipment startup, debugging, and commissioning at the facility and occasionally at customer sites
• Provide troubleshooting support to assembly teams and field service technicians for electrical and software-related issues
• Develop system upgrades, enhancements, and solutions for field-reported issues
• Collaborate with engineering and project management to support project schedules and machine build timelines
• Ensure all designs follow applicable regulations including NEC, NFPA 70, and cGMP
• Participate in training, trade shows, and technical events to stay current with industry trends and competitive technologies

The Details:

• 3+ years of experience in automation, controls engineering, or machinery manufacturing
• Hands-on experience with PLCs, HMIs, and motion control systems (Rockwell, Siemens, B&R)

Maintenance Tech III (Electrical & Controls)

About Shaw Bakers

At Shaw Bakers, we love mixing renowned French techniques with state-of-the-art process innovation to bring delicious baked goods to our local community through our legendary local Cafes, as well as national retail partners across North America. We are an aggressive, fast-growing company with a full pipeline of exciting new projects, products, and employment opportunities.

About The Role

We are looking for a reliable and experienced Mechanical & Controls Technician, capable of installation, maintenance, troubleshooting, minor programming, and repair of electrical, mechanical, and automated control systems in an industrial or manufacturing environment. This position combines electrical, mechanical, and controls knowledge, ensuring systems function within design parameters safely and efficiently at our Shaw Bakers’ manufacturing facility in San Leandro.

Core Responsibilities

Responsibilities and essential job functions include but are not limited to the following:

• Controls & Electrical Duties: Troubleshoot and repair electrical and electronic systems, motor controllers, variable frequency drives (VFD), servo systems, and motor starters. Diagnose PLC alarms and repair or replace sensors, actuators, input/output modules and other control devices as required.
• Vendor Coordination: Point of contact with vendors for PLC hardware/software issues or upgrades, and general mechanical and electrical equipment repair.
• Mechanical Duties: Inspect, maintain, and repair mechanical systems, including motors, pumps, compressors, conveyors, production machinery, and related equipment. Perform diagnostic tests, identify faults, and implement repairs or part replacements. Ensure preventive maintenance procedures are followed to minimize downtime.
• Documentation & Compliance: Maintain detailed records of maintenance, diagnostics, calibrations, and system modifications. Prepare technical reports, schematics, and manuals. Ensure all work adheres to safety, environmental, and regulatory standards.
• Training and Support: Providing technical expertise and hands on training and development for operators and maintenance techs on an ongoing basis.
• Proactive Engagement: Perform area walkthroughs and inspections of the facility and equipment to identify and resolve issues proactively.
• Comply with Health & Safety Policies: Follows and ensures health and safety policies are always the first task.
• Collaboration: Effectively collaborate with other departments and vendors to develop, plan, and implement projects to improve company efficiency, safety, and overall throughput.

Skills & Experience Required

• 5+ years of Industrial Control Systems Maintenance required, including hands-on experience with motor controls, VFDs, servos, DeviceNet, and PLC troubleshooting.
• 5+ years of Mechanical Maintenance, including troubleshooting, from a manufacturing or industrial environment required.
• Technical Skills: Ability to read and interpret electrical schematics, mechanical blueprints, wiring diagrams, and pneumatic/hydraulic schematics. Proficient with diagnostic tools. Strong troubleshooting skills for both mechanical and electrical systems.
• Knowledge of automation software and HMIs a plus.
• Experience with Ladder logic programming a plus.
• Experience reporting daily metrics in a CMM.
• Ability to operate in a rapidly changing environment.
• Excellent communication and interpersonal skills.

Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment.

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!

Job Location: Dallas, TX

Signing Bonus Details:

• Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days)
• Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days)

Essential functions:

• Wire all controls and motors for watertube and firetube boilers and auxiliary equipment.
• Rebuild control valves and regulators.
• Build and test control panel using Engineering wiring schematic and layout.
• Build and test fuel skids using Engineering wiring schematic and layout.
• Build and test condensate tanks and deaerators.
• Trim out firetube and watertube boilers.
• Perform start-up of Rental boilers in field.
• Assist departments as required.
• Reads blueprints and wiring schematics.
• Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers.
• Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler.
• Able to fire and set combustion on boiler with all types of pneumatic controls.
• Able to fire and set combustion on boiler with all types of electrical controls.
• Able to train other employee’s on the operation and controls of boilers.
• Maintain condition of and inventory of all tools and monitors.
• Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results.
• Ensure duties and company projects are accomplished in an efficient and cost effective manner.
• Support peers and management with internal and external projects.
• Adhere to company policies.
• Other duties as assigned.

Basic Requirements:

Education:

• High School diploma or equivalent

Experience:

• Minimum of two (2) years of electrical troubleshooting/ technical background.

Other Requirements:

• Must possess a valid drivers license with a safe driving record
• Must be able to read and work from blueprints and schematics.
• Must be able to follow written and verbal instructions.
• Mechanical and electrical background a must.
• Must have the ability and knowledge to trouble shoot systems without the appropriate schematic.

Physical Skill & Effort:

Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing.

Working Conditions and Hazards:

Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions.

Benefits of being a Cleaver-Brooks Sales & Service Employee:

• Competitive salary
• Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability
• Cash matching 401(k) plan
• Employee assistance program (EAP)
• Pet insurance
• Employee discount program
• Tuition assistance
• Paid time off and 11 paid holidays

Who is Cleaver-Brooks Sales & Service:

Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace.

We are a 24/7 customer driven operation.

This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Cleaver-Brooks, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity for a Senior Design & Analysis Engineer to become part of Boeing Test & Evaluation (BT&E) Vehicle Management System (VMS) team in Berkeley, MO or Hazelwood, MO.

You will enable the VMS organization to continue to advance its technologies in support of our Phantom Works and Fixed-Wing programs. The team is responsible for developing integration test assets, real-time software test environments, subsystem/system testing, and evaluating system performance in simulation lab environment. Simulation and modeling are utilized to assist in requirements development, software and hardware development, and equipment verification and validation.

Position Responsibilities:

• Lead major design activities for hardware/software products

• Mentor junior engineers in design practices and processes; oversee the quality of their work products

• Develop architectures for test systems

• Select components for hardware designs and support the procurement and fabrication of hardware designs

• Integrate hardware systems and/or software together in a test setting

• Operate complex test stations, electronic test equipment, and test software

• Test and validate to ensure system designs meet operational and functional requirements

• Solve problems concerning fielded hardware and software over the entire product lifecycle

• Interface with programs/customers in developing requirements, in establishing statements of work, and in providing status and performance

• Develop estimates for new work by gathering data from other BT&E partners and from team actuals

• Develop detailed schedules and drive team performance to meet schedules

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 9 years of experience with avionics testing and integration

• 3 years of experience with test station design or test system design

• 3 years of experience with the development of Flight Controls or Flight Controls Systems such as Flight Control Computers/Vehicle Management System Computers, Actuators, Air Data Probes, and Navigation Systems

• Experience preparing test plans, writing test procedures, and performing tests to gather artifacts

Preferred Qualifications (Desired Skills/Experience):

• 9 years of experience designing and integrating Flight Controls or Flight Controls Systems

• 3 years experience leading other engineers in major projects

• Experience with MATLAB, Simulink, and/or real-time operating systems

• Experience with software programming and creating scripts for automated testing

• Experience with MIL-HDBK-516C

Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $129,200 - $174,800

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Conduct routine sampling/testing following PMO Chapter 7 and company requirements.
• Maintain and calibrate water analysis equipment (e.g. chlorine meters, turbidity meters…).
• Maintain accurate logs for raw, treated, and post-treatment water.
• Conduct trend analysis to identify areas with continuous improvement opportunity.

• Monitor and maintain water treatment, filtration, RO, UV and/or chemical dosing systems.
• Manage water inventory through planning and predicting production of potable water and purchase of city water.
• Ensure proper functioning of backflow preventers, piping, storage tanks and distribution systems.
• Participate in maintenance planning and troubleshooting of water system components.
• Maintain sanitary design and hygienic standards for all water contact infrastructure, including:
• CIP rinse and final rinse water.
• Direct-contact water used in equipment, valves, and product pathways.
• Auxiliary systems (condensate of whey/evaporator water reuse, RO water, softened water).
• Ensure proper function and sanitation of water filtration, reverse osmosis/polishers, chemical treatment (chlorination, chlorine dioxide generation…), UV systems, and CIP integrated water routes.
• Partner with Maintenance to troubleshoot water heaters, boilers, supply lines, and backflow preventers.

• Ensure water quality meets PMO Chapter 7 requirements, FDA/FSMA Preventive Controls, and state dairy regulations.
• Maintain complete water system records for FDA/state inspections, IMS audits, and third-party audits.
• Support hazard analyses (HACCP/PC) with specific focus on water as an ingredient and indirect-contact risk factor.
• Lead water-related corrective action investigations and preventive action documentation.

• Maintain water sampling schedules, test results, calibration records, and system maintenance documentation.
• Update and manage SOPs and SSOPs for dairy water systems, CIP water use, and water testing protocols.
• Provide monthly reports to Quality/Food Safety leadership summarizing trends, deviations, and system performance.
• Identify opportunities to optimize water usage, reduce chemical consumption, and improve microbial control.

• Train CIP operators, production, and sanitation teams on proper water quality expectations and testing procedures.
• Support Engineering during new equipment installations or modifications to ensure water contact areas meet sanitary design.
• Serve as the dairy plant's subject matter expert during customer visits, SQF/BRC audits, and regulatory inspections.

• Associate's or Bachelor's degree in Food Science, Dairy Science, Microbiology, Environmental Science, or related field—or equivalent experience.
• 2+ years in dairy manufacturing, water treatment, or environmental monitoring.
• Understanding of CIP systems, dairy sanitation, and hygienic design principles.
• Familiarity with PMO Chapter 7, FSMA, and state dairy regulatory requirements.
• Experience with microbial testing, water analysis equipment, and trend evaluation.

• Bilingual in English/Spanish.
• HACCP and/or Preventive Controls Qualified Individual certification.
• Experience with RO systems, evaporator condensate reuse (COW), and dairy utility systems.
• Knowledge of SSOP development, CIP troubleshooting, and environmental microbiology.