Automatic Controls Equipment Systems Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are looking to hire a Registered Nurse to join our EP Cath Lab Team at MercyOne Genesis in Davenport, Iowa!

Schedule:

• M-F, first shift hours--40 hours per pay period

• Call one night per week and every 4th-6th weekend

Responsibilities:

• Provides direct patient care activities in the Cath Lab & other applicable procedural areas implementing an outcome-based plan of care

• Identifies learning needs and implements a plan for the patient, conducts patient and family teaching and documents teaching done

• Appropriately uses equipment required to perform Cath Lab procedures

• Understands varying treatment needs and approaches for patients across the life span, as appropriate to the department

• Performs independently in the role of scrub tech, circulator, and hemodynamic monitor and obtains data collection with physiologic calculations specific to the procedure performed and documents

• Initiates BLS/ACLS protocols as appropriate in cardiac emergencies

• Provides care utilizing critical thinking skills based on patients' needs and acuity, and is consistent with policies and procedures of the department 

• Coordinates and provides care with a team approach

• Demonstrates clinical competency 

• Facilitates medication administration, initiates and manages IV therapy

• Assures medication safety by following the “5 Rights of Medication Administration” 

• Manages patient’s pain in accordance with policy

• Monitors and manages conscious sedation/sedated patients in accordance with policy

• Responsible for daily count of controlled substances

• Cross trained to work in other procedural areas as needed

• Assists with and implements appropriate interventions during Cardiovascular Procedures under the direction of a licensed professional

• Communicates relevant clinical information to optimize patient outcomes to phys. and other health care professionals

• Documents completely and legibly

• Conducts an initial assessment and ongoing assessments

• Completes initial assessment in accordance with policy

• Completes ongoing assessments based on patient’s individual needs and/or unit specific time frames 

• Identifies problems, needs and/or changes in patient conditions and implements interventions

• Performs indirect patient care activities to maintain department standards

• Cleans and maintains equipment as needed

• Assures all patient care and storage areas are clean and organized

• Assists with supply ordering as assigned

• Participates in unit-based quality monitoring of patient/procedural outcomes

• Charges patient account for procedures and supplies in a timely manner

• Demonstrates responsibility for cost-containment in daily practice

• Identifies process improvement opportunities and supports change within the department/organization

• Participates in and supports precepting and mentoring activities for new employees in the lab as requested by manager

• Does follow up calls to patients as assigned. (customer service, fluoro time) 

• Familiar with regulatory requirements and assists with surveys as assigned

• Based on principles of growth and development, provides care appropriate to the age-related needs of the patients served on his/her assigned unit, which may include: 18-65 Yrs: Adults and 65+ Yrs: Geriatrics 

• Collects, analyzes, interprets and applies age-specific data

• Performs tasks/procedures, uses equipment in an age-appropriate manner

• Communicates and works with others in an age-appropriate manner

• Adheres to all safety, infection control and colleague health policies and procedures

• Attends required safety programs

• Appropriately and consistently uses the personal protective equipment required of the job

• Knows and can demonstrate departmental emergency procedures for fire, disaster and other emergency situations

• Reports and removes unsafe equipment/furniture

• Asks for assistance when needed to assure safety for all involved

• Maintains a safe working environment and practices safe working habits

• Maintains a working knowledge of applicable Federal, State, and local laws and regulations, Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manne

ARM EnerTech Associates, LLC (AETA) is a wholly owned subsidiary of ARM Group Enterprises Inc. AETA is seeking a self-driven and experienced Sr. Automation Specialist / Electrical Engineer who has a strong business acumen and embodies an ownership mentality. As a Sr. Automation Specialist / Electrical Engineer, you will collaborate with a team of multi-disciplined engineers and scientist, project managers, CAD designers, and other staff to service our Northeast US based clients’ needs. This role will establish client relationships, define client needs, develop winning strategies, prepare proposals, and manage the development, design and permitting of a wide range of projects related to automation, control systems, and control panel design. The successful applicant will be a highly motivated, resourceful, well-organized, and a cooperative producer and manager that is able to meet project goals, schedules, and budgets.

Responsibilities

• Manage and coordinate the development, design, and execution of multiple projects simultaneously.
• Develop project scopes, objectives, proposals, and budgets while effectively communicating with key stakeholders.
• Oversee project schedules, coordinate with subcontractors, and manage resources to ensure timely completion within budget.
• Responsible and accountable for projects including design of industrial controls systems including PLCs, HMIs, SCADA systems, and motor drives.
• Prepare, review, and update design drawings using AutoCAD.
• Support and lead on-site Site Acceptance Testing (SAT), system startup, and training functions related to PLC & HMI hardware and programming.
• Manage projects budgets to ensure they are delivered on time and under budget.
• Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.
• Communicate and interface with clients and vendors.
• Writing technical documentation such as: Functional Descriptions, Functional Specifications, Test Documents, Reports, etc.
• Provide mentorship to junior engineers and contribute to technical knowledge-sharing within the team.

Requirements

• 10+ years’ expertise in industrial control systems, PLC/PAC programming, HMIs, VFDs, and SCADA systems.
• Proficiency in Microsoft Office Suite; experience with AutoCAD or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Comfortable working around energized power distribution equipment and related control systems.
• Requires travel to job sites including overnight stays to provide on-site commissioning, troubleshooting, customer support and training.
• Strong organizational and project management skills with the ability to manage multiple complex projects.
• Excellent communication and leadership skills with the ability to interact with clients and team members effectively.
• A proactive, problem-solving mindset with the ability to work independently and collaboratively.

Preferred Requirements:

• Degree in Electrical Engineering or Computer Engineering.
• Experience in Siemens and Allen-Bradley automation components.
• Knowledge of UL508A Control Panel design and standards.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Overview:

“Together We Make Life Better”. Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows for all employees to feel valued and safe to give their opinions and improve our company.

Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries.

Responsibilities:

Completes work according to standard procedures on assignments from Senior Document Control clerk.

Assignments are completed efficiently and on time.

Ensures quality for completed personal work assignments.

Prepares memos, letters, meeting minutes, reports, forms and other documents using company or client word processors. Types and proofreads from dictation or draft by others.

Organizes and maintains project files under close supervision.

Operates equipment, i.e. padding machine, binding, paper cutter to produce document packages per instructions from requestor.

May operate reproduction equipment such as blueprint, high-speed copiers, offset devices, etc. to produce legible documents.

Reports to the Senior Document Control Clerk for team or group assignment and determination of standards.

May receive direction and/or work from other managers/supervisors.

Accommodates needs from all employees for file management and document processing.

Works pursuant to direction in a consistent manner according to established procedures.

May require direction to appropriately accommodate new circumstances.

Develops a familiarity with engineering, construction, and process terminology.

Uses the following office equipment, such as PC’s, printers, typewriters, fax machines, copiers, telephone equipment, and various other office machines to complete work.

Qualifications:

Holistic understanding of Document Management, Information Management, and Self-guided, confident in their field, and able to adapt/learn on the fly.

Understanding of how information technology works and how it's utilized in these instances.

Software Experience Required: Microsoft Office, SharePoint, and EDMS

Education Requirements:

Minimum of 5 years relevant industry work experience.

EEO Statement:

Tata Consulting Engineers USA, LLC (“TCE”) is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.

In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system.

Fraud Alert:

Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised all email communications from TCE will come from our business email addresses, which end in '@ '. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our website at

Provide on-site operational U.S. Marine Corps and Navy C2/C4I Systems experience to work Naval Integration issues related to Marine Corps and Navy C4I assets aboard Amphibious Assault Ships and to provide technical and program support to Maritime Expeditionary Warfare (MExW), Deputy Commandant, Combat Development & Integration (DC, CD&I), located at Quantico, VA.

Responsibilities and Duties:

• Drawing upon C4ISR system experience in Joint and Naval mission accomplishments, conduct analysis of and develop documentation on system data exchanges. Support the analysis of amphibious C4I/C5I system requirements (primarily USMC C4I systems), integration and capability development. Defines, designs and develops system requirements.
• Represent USMC interests with various International, National, DoD, Joint and Navy stakeholders that develop C4ISR policy.
• Assist in creating an integrated amphibious C4I architecture for afloat MAGTF that allows for configuration and baseline control of deployed Operational Nodes and systems.
• Prepare a MEU/Afloat MAGTF for deployment aboard amphibious warfare vessels by tracking system's standards compatibility and interoperability certifications.
• Work with acquisition professionals to ensure effective and economical acquisition and life cycle sustainment for products, equipment, and systems by assisting in business case development (requirements) and cost/benefit analyses for proposed systems.
• Perform document analysis; requirements parsing, taxonomy alignment, reports generation, abstraction outline, and capability set mapping that will further enable analysis of highly complex business problems to be solved with automated systems.
• Analyze system interface problems, data definitions and user interface design issues to include a variety of detailed systems factors; input/output requirements, information flow, hardware and software requirements, and reliability characteristics.
• Facilitate user discussions and analyses to develop/refine system requirements, arbitrate conflicts between stakeholders, and recommend optimum integrated systems design approaches.
• Maintain mapping of USMC, USN and Joint Systems to MAGTF Afloat required capabilities in support of the annual Afloat MAGTF C4 Required Capabilities (AMC4RC) Letter.
• Draft and present reports, studies, formal briefings, and business cases analyses (requirements) as required by the customer. Draft and edit the annual AMC4RC Letter in accordance with DoD documentation standards and Marine Corps style guides.
• Conduct gap reviews, reconciliation, attend meetings, draft summary with key points, decisions made, and issues of contention noted. Maintain current knowledge of relevant technologies as assigned.
• Support various networking projects and tasks including network architecture and design analysis, network systems engineering, network and C2 systems integration, test planning, and testing and documentation of military networking systems.
• Provide engineering and IT services focused on solutions and customer-centric support to Naval networks/CANES/ISNS issues. Provide expertise in the design, analysis, engineering, implementation, and/or operation of USMC/Naval IT networks.
• Coordinate design of subsystems and integration of total system. Defines system support requirements to include monitoring, capacity, staffing and patching/updating. Analyzes and resolves program support deficiencies.
• Represent USMC interests through the participation in Service, Naval, and Joint level working groups, exercises, and wargames as a C4I SME.
• Coordinate for C5I integration of manned aircraft, unmanned aircraft, and aviation command and control systems aboard Naval ships and within the Naval Operational Architecture.
• Facilitate the integration of Artificial Intelligence/Machine Learning systems aboard amphibious ships for use by the Afloat MAGTF.

Supplementary/Administrative Duties

• Assist in responding to specific technical tasks assigned to MExW in the Enterprise Task Management Software Solution / Task Management Tool.
• Prepare meeting minutes and deliver to Branch Head.
• Prepare and submit monthly accomplishment reports to the Project Manager.
• Prepare and submit travel requests, reimbursement forms and trip reports as necessary.
• Complete required annual government contractor training.
• Assist in publishing the Maritime Expeditionary Warfare Annual Report.

Skills/Qualifications

• Capable of working efficiently within a military staff environment that requires coordination at the Navy & Marine Corps service and Joint Staff levels.
• Understanding of current and legacy information and communication exchange systems for both ashore and afloat Marine Corps units.
• The candidate must possess excellent interpersonal, communications, and presentation skills.
• Proficiency in Microsoft Office applications (especially Word, Excel, and PowerPoint) is required.

Education/Experience/Knowledge:

• Bachelor’s degree from an accredited College or University in Information Systems Management or related field and at least 8 years of relevant experience is required. In lieu of a degree, 12 years of substantive, relevant experience is applicable. Experience is a higher-level discriminator over educational achievements.
• The candidate must have advanced knowledge of the principles, practices, and procedures used in systems engineering, analysis, and design. The candidate will provide technical expertise and lead the analysis of highly complex systems - working with acquisition professionals and operational forces to develop system requirements, resolve interface and performance issues, and develop / evaluate new systems that are cost effective and meet user requirements.
• The candidate must have a solid knowledge of Marine Corps and Navy organizational structures and functions.

Location: The primary workplace will be at Headquarters Marine Corps, Combat Development & Integration (HQMC CD&I) General Raymond G. Davis Center (Bldg. 3300), 3300 Russell Rd, Quantico, VA 22134.

Work Environment:

• On-site Office Environment, amongst mixed military/civilian/contractor personnel.
• Employees will be exposed to a wide variety of people with differing functions, personalities, and abilities.

Physical Demands:

• Work is generally sedentary; there could be a requirement to assist in moving and repositioning computer systems, servers, and other office equipment weighing no more than 50 pounds per person (e.g., two-man lift 100 lbs.).
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Schedule: Full Time/40 hours per week. Mon-Fri/8 hours a day. Normal working hours are 8:00 AM – 4:00 PM (0800 – 1600).

License and Other Requirements:

• Hold a valid US Driver’s License, with ability to operate private, and commercial owned motor vehicles (Rental), as required for commuting and travel.
• Must be able to obtain a contractor's common access card, which will stand as identification for instructors and will enable them to access government owned computer equipment and Non-secure Internet Protocol.

Salary and Benefits: As stated during the interview/hiring process.

Security Clearance: Possess an active U.S. Secret level security clearance. As required, obtain a Secure Internet Protocol (SIPR) access token for access to government SIPR computers terminals

Travel: Travel to other government facilities, other contractor facilities, and/or ships will be required. Travel may be required on weekends and could include CONUS and OCONUS locations. The exact dates and duration of travel will vary dependent upon location and requirements of individual events to include planning, attendance at meetings, conferences and/or wargames.

Job Title: Fabrication Quality Control (QC) Manager

Location: Long Beach, MS (Open to Relocation)

Employment Type: Direct Hire

Work Environment: 100% Onsite

Travel: 0–5% local travel to fabrication shop, office, or job sites as needed

Compensation

• Salary: $102,000 – $136,000 annually (based on experience)
• Bonus: Discretionary annual bonus

Position Summary

Wheeler Staffing Partners is seeking an experienced Fabrication Quality Control (QC) Manager to oversee and manage quality control and assurance processes for fabrication operations supporting industrial and process piping projects. This role provides technical leadership to ensure fabricated products meet industry standards, regulatory requirements, project specifications, and client expectations.

The QC Manager will work closely with estimating, engineering, and fabrication teams to ensure consistent quality, compliance with applicable codes, and continuous improvement in fabrication processes. The ideal candidate has experience within pipe fabrication, process piping, or mechanical subcontractor environments, along with strong knowledge of engineering drawings, fabrication methods, and estimating standards.

Key Responsibilities

Quality Control Leadership

• Develop, implement, and maintain quality control standards and procedures aligned with industry codes, project specifications, and client requirements
• Oversee daily inspection of machinery, equipment, fabrication processes, and working conditions to ensure compliance with quality and regulatory standards
• Prepare daily inspection reports and provide recommendations for corrective actions when quality issues are identified
• Establish and maintain quality assurance policies, procedures, and quality manuals supporting ISO 9001:2015 and ASME certification standards

Fabrication Quality Oversight

• Perform and document in-process inspections and verification for piping, plumbing, and sheet metal fabrication
• Ensure fabricated products meet project design specifications, applicable codes, and client requirements
• Inspect fabrication documentation and maintain records required for quality compliance and project documentation
• Prepare project turnover documentation and quality packages for completed work

Welding & NDE Management

• Test and certify welders and welding procedures according to applicable codes
• Maintain welder continuity logs in compliance with industry standards
• Coordinate and schedule contract Non-Destructive Examination (NDE) testing as required

Regulatory Compliance

• Ensure all quality control activities comply with industry regulations, codes, and project standards
• Monitor regulatory changes affecting fabrication and piping standards and communicate updates to internal teams

Data Analysis & Continuous Improvement

• Analyze quality metrics, trends, and performance data to identify opportunities for process improvement and defect reduction
• Conduct root cause analysis and support corrective and preventative actions
• Lead or support cross-functional quality improvement initiatives that enhance operational efficiency and product quality

Estimating & Bid Support

• Review Requests for Quotation (RFQs) and assist estimating teams with quality requirements and bid specifications
• Support cost estimating efforts related to fabrication processes and project requirements
• Utilize established KPI metrics to determine performance factors and labor hour calculations during estimate development

Cross-Functional Collaboration

• Partner with estimating, engineering, project planning, and fabrication teams to resolve quality concerns and implement corrective actions
• Support development of fabrication strategies for new projects or process improvements

Training & Team Development

• Provide training, coaching, and mentorship to quality control personnel and fabrication staff on quality standards and best practices
• Promote a culture of safety, quality, and continuous improvement throughout fabrication operations

Required Qualifications

• 5+ years of quality control experience within pipe fabrication, industrial/process piping, or mechanical subcontractor environments
• Experience working in a fabrication shop environment
• Ability to read and interpret engineering drawings, specifications, and fabrication documentation
• Experience with cost estimating related to fabrication and piping work
• Knowledge of pipe fabrication methods, materials, and project specifications
• Familiarity with process piping unit rates and estimating references such as ’73 Price Book or Page & Nations
• Strong analytical, documentation, and quality inspection skills
• Ability to manage multiple projects in a fast-paced fabrication environment

Preferred Qualifications

• Experience with modular estimating
• Experience utilizing KPI metrics for labor hour build-up and performance factors
• Certified Welding Inspector (CWI) certification preferred
• ASNT Level II certification in ASME B31 piping preferred
• Advanced proficiency in Microsoft Excel and Microsoft Office Suite

Skills & Competencies

• Strong leadership and quality management capabilities
• Advanced knowledge of fabrication quality standards and inspection procedures
• Strong analytical and problem-solving skills
• Excellent communication and documentation abilities
• Ability to collaborate across engineering, fabrication, and project teams
• High attention to detail and commitment to quality standards

Work Environment

This position operates primarily within a fabrication shop and office environment and may include exposure to industrial work settings, including equipment, welding operations, and fabrication processes.

Why Work with Wheeler Staffing Partners

Wheeler Staffing Partners connects skilled professionals with leading organizations across the United States. Our team is dedicated to helping candidates find opportunities that align with their expertise, career goals, and long-term professional growth while providing personalized support throughout the hiring process.

Details:

Job Title: API EM Quality Assurance Professional

Location: Indianapolis, IN

Duration: 12+ Months Contract (extendable)

Pay Range: $70 - $77 per hour on W2.

Qualifications:

At Client, we serve an extraordinary purpose. We make a difference for people around the globe by discovering, developing and delivering medicines that help them live longer, healthier, more active lives. Not only do we deliver breakthrough medications, but you also can count on us to develop creative solutions to support communities through philanthropy and volunteerism.

Join the energetic and growing Active Pharmaceutical Ingredient - External Manufacturing Organization (API-EM) that delivers a diverse portfolio of medicines essential to our patients around the world. The API EM Quality Assurance for Quality Control provides support to all QC activities at Contract Manufacturing organizations (CMs). The QA for QC position is essential for ensuring that all QC testing is in accordance with the validated methods and are compliant to cGMPs and regulatory commitments.

Basic Requirements:

• BS in a science-related field such as Pharmacy, Chemistry, Biological Sciences or related Life Sciences.

• 5+ years of GMP Quality Control Laboratory knowledge and/or experience in API or finished product manufacturing, QA or Engineering.

• Additional Preferences:

• Testing experience with Small Molecule

• Thorough technical understanding of quality systems and regulatory requirements relating to quality control laboratories

• Knowledge of pharmaceutical manufacturing operations.

• Demonstrated coaching and mentoring skills.

• Experience in root cause analysis.

• Demonstrated application of statistical skills.

• Demonstrated strong written and verbal communications skills.

• Strong attention to detail.

• Proficiency with computer system applications.

• Excellent interpersonal skills and networking skills.

• Ability to organize and prioritize multiple tasks.

• Ability to influence diverse groups and manage relationships.

Education Requirements:

• BS in a science-related field such as Pharmacy, Chemistry, Biological Sciences or related Life Sciences.

Other Information:

• Must complete required training for API EM Quality Assurance.

• No certifications required.

• Tasks require entering manufacturing and laboratory areas which require wearing appropriate PPE.

• Must be able to support 24 hour/day operations.

• Up to 20% travel US & OUS.

Responsibilities:

Key Objectives/Deliverables:

• Serve as a liaison between CMs and Client.

• Provide quality oversight of Quality control activities at CMs including being the initial point of contact for all quality-related issues with testing.

• Provide quality oversight of CM method validation or method transfer activities

• Escalate quality issues at CMs to Client's QA management.

• Assist in the establishment and revisions of Quality Agreements with affiliates and customers.

• Ensure compliance to Quality Agreements and Manufacturing Responsibilities Documents (MRDs).

• Coordinate and perform quality responsibilities of API shipments for stability testing. Provide quality oversight of API EM stability program.

• Participate in regulatory inspection preparations with CMs.

• Ensure that documented checks have been completed for the Certificates of Testing and Certificates of Environmental Monitoring (where applicable), and deviations, changes and batch documentation that demonstrates requirements have been met prior to batch release.

• Provide quality support of Quality Control with the focus on holistic review of key activities associated with or impacting the quality control testing including deviations, change controls and countermeasures.

• Assess the impact of analytical deviation investigations and changes and ensure that all appropriate records are documented and retrievable.

• Maintain awareness of external regulatory agency findings which individually or collectively reference the quality of the product.

• Review and approve documents including, but not limited to, analytical procedures, change control proposals, deviations, analytical equipment qualifications, analytical methods and computerized system validations.

• Participate in APR activities.

• Participate in projects to improve productivity.

• Participate in Joint Process (JPT) and Post Launch Optimization (PLOT) Teams.

Control Panel Builder

PACIV stands for Process Automation, Controls, Instrumentation, and Validation.

Please Note: PACIV does not engage with external recruitment agencies. We kindly request that agencies do not contact us regarding this posting.

PACIV is a global leader in industrial automation and process control solutions, serving clients in the life sciences, pharmaceutical, medical device, food & beverage, and utilities sectors, specializing in delivering compliant, high-performance automation systems tailored to regulated environments.

We are looking for a skilled Control Panel Builder to join our team in Indianapolis, IN. In this role, you will take ownership of assembling and wiring high‑quality electrical control panels that power a wide range of industrial automation and power distribution systems. You will work hands‑on with circuit breakers, relays, and controllers, contributing directly to the reliable performance of equipment used across multiple industries.

This position requires direct employment.

We do not consider C2C (Corp-to-Corp) or 1099 contract arrangements.

Job Responsibilities

• Read and interpret technical drawings, electrical schematics, and layouts to ensure accurate panel assembly and functionality.
• Perform testing and troubleshooting of control panels, verify proper operation and compliance with all safety and quality standards.
• Support shop operations, including inventory management, material requests, scheduling, shipping/receiving, and maintenance of tools.
• Collaborate with clients and engineering teams to troubleshoot and resolve technical issues during fabrication.
• Apply strong analytical and problem-solving skills in electrical and instrumentation work, while adapting to changing priorities and project requirements.
• Demonstrate resilience under pressure, accountability within a team environment, and a results-driven, self-motivated approach.
• Exhibit excellent interpersonal and communication skills (verbal and presentation), strong organizational abilities, and proficiency with computer systems.

Qualifications

• Electrical Technician Certification or an equivalent credential preferred, High School Diploma or GED required.
• Minimum 3 years’ experience building and assembling electrical control panels.
• Ability to read and interpret electrical schematics for systems operating at 24 VDC, 120 VAC, and 480 VAC.
• Working knowledge of PLC systems & platforms; Allen Bradley, Siemens, Rockwell, or Schnider preferred.

Compensation & Benefits Highlights

PACIV offers a competitive salary with a comprehensive benefits package designed to support the well-being and financial future of our employees

• Generous Paid Time Off - Vacation, sick leave, and company-recognized holidays.
• Healthcare Coverage - PACIV covers 90% of your healthcare premium
• Health Savings Account (HSA) – Bi-monthly company contributions to cover out-of-pocket medical expenses.
• 401(k) Retirement Plan - Company match up to 4% & full vestiture on enrollment date

PACIV is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. PACIV complies with all applicable federal, state, and local laws regarding non-discrimination and affirmative action. Employment is contingent upon successful completion of background checks and eligibility to work in the United States.