Automatic Controls Equipment Systems Jobs in Usa

• 
  
• Need to be able to travel for the first 2 weeks of job for onboarding training and safety education (travel to company site for training - travel paid by company)
  

• 
  
• Need to be able to travel for the first 2 weeks of job for onboarding training and safety education (travel to company site for training - travel paid by company)
  

The Broward County Board of County Commissioners is seeking qualified candidates for Animal Control Officer to support the Animal Care Division.

Benefits of Broward County Employment

High Deductible Health Plan - bi-weekly premiums:

Single $10.90 / Family $80.79

Includes a County Funded Health Savings Account of up to $2000 Annually

Consumer Driven Health Plan - bi-weekly premiums:

Single $82.58 / Family $286.79

Florida Retirement System (FRS) - Pension or Investment Plan

457 Deferred Compensation employee match

Eleven (11) paid holidays each year

Vacation (Paid Time Off) = 2 weeks per year

Up to 40 hours of Job Basis Leave for eligible positions

Tuition Reimbursement (Up to 2K annually)

Paid Parental Leave

Works under general supervision, independently developing work methods and sequences.

Minimum Education and Experience Requirements

- Associate's degree or higher in animal sciences, veterinary sciences, law enforcement or closely related field
- NACHO Certification Levels I-III (National Animal Control Association)
- Basic Law Enforcement Recruit Training Certificate
- 2+ years of experience working as an animal care specialist or similar
- Knowledge of streets, roads, and locations within Broward County
- NACA and/or FACA certification
- Florida euthanasia certification
- Chemical Immobilization Certification

Additional Information:

This position is considered a safety-sensitive position. Candidates selected for employment will be subject to pre-employment verifications to include but not limited to; post-offer physical examination/drug test and clearance of the Department of Children and Families Affidavit of Good Moral Character.

Responds to complaint calls in order of priority to, set traps, capture loose, stray, sick, injured, or abandoned animals; investigate animal abuse, neglect, and/or nuisance.

Conducts general investigations of animal related problems including, but not limited to animal cruelty and neglect, aggressive and dangerous dogs, animals running at-large, barking, permitting, licensing and impounding of animals all which may involve hostile, irate or distressed members of the public, in a tactful, professional and effective manner.

Patrols an assigned zone in order to identify/capture stray animals, responds to calls/complaints, and enforces animal care ordinances; captures a variety of animals in order to protect the community and to protect animals from injury/death.

Apprehends and confines stray, injured, aggressive/dangerous and nuisance animals in the most safe, humane and approved manner possible. Transports animals to sheltering facility and/or veterinary clinic.

Performs routine medical procedures/evaluation upon animals while in the field including but not limited to, conducts basic medical triage as needed; euthanize animals if necessary and permitted; and administers first-aid when necessary.

Performs routine medical procedures/evaluation upon incoming animals including but not limited to, administers oral and injectable medications; conducts basic medical triage as needed; euthanize animals if necessary and permitted; and administers first-aid when necessary.

Mediates animal issues between citizens; educates members of the public about laws and regulations on animal care; takes immediate action if necessary; gathers evidence and information for further investigation as indicated; documents information; consults with supervisors and/or management staff regarding cases of a complex or unusual nature; works with local law enforcement agencies, issues civil citations to responsible parties for animal-related issues; provides testimony on investigations and findings; performs related duties as assigned.

Maintains and uses controlled drugs in accordance with law and policy for humane euthanasia, sedation or chemical capture of animals.

Works with other community professionals such as police officers, court officials and veterinarians.

Prepares written investigative reports that may be introduced as legal court evidence.

Answers telephone calls from citizens and dispatches calls for service to other field staff on a rotational basis as assigned.

Interacts with the public in order to educate people regarding animal behavior, animal care ordinances, and basic animal care procedures; explains Broward County animal care policies, procedures, and fees; assists with adoptions, and resolves animal care ordinance related issues.

Assists public with issues of pet identification and reuniting pets with their owners.

Responds to night emergency calls on a rotating basis; assists fellow specialists as requested and/or necessary; works overtime as necessary to complete duties.

Follows safety procedures, utilizes safety equipment, and monitors work environment to ensure safety of employees and other individuals.

Operates a laptop/computer and other common office equipment necessary to complete the duties assigned.

Operates issued animal capture, restraint and transport equipment necessary to complete the duties assigned.

Transports shelter animals to appropriate veterinarian hospital, participates in public events as directed, and communicates well with other employees, public and administrative staff.

Performs general clerical tasks, provides backup coverage to other officers and dispatch as needed, participates in meetings and special assignments as directed.

Assists in shelter cleaning and maintenance, euthanasia and care of impounded animals when needed.

Performs other related duties, tasks, assignments and/or responsibilities as assigned.

WORK ENVIRONMENT

Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs physical work that involves walking, running, standing, stooping, stretching, or lifting. Work also involves lifting over 50 pounds on a regular and recurring basis. Dexterity involving exceptional skill, adeptness, and speed in the use of fingers, hands, or limbs in tasks involving very close tolerances or limits of accuracy.

Involves routine and frequent exposure to extreme noise levels.

Involves routine and frequent exposureto disease/pathogens.

Involves routine exposure to aggressive or dangerous animals.

Involves routine and frequent exposure to extreme heat and/or cold; wet or humid conditions.

Competencies

• Decision Quality

• Action Oriented

• Manages Conflict

• Interpersonal Savvy

• Communicates Effectively

• Manages Ambiguity

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Saniset Fleet – Los Angeles, CA

Saniset Fleet keeps work moving with reliable equipment, vehicles, and smooth operations—and we’re looking for a versatile Technical Equipment & Operations Coordinator to help us do just that. This role blends hands‑on work with our equipment and vehicles with light systems and admin support to keep our team connected and organized.

What you’ll do

Equipment & vehicles

• Repair and maintain our equipment, including troubleshooting electrical, mechanical, and basic software-related issues (battery systems, inverters, control interfaces).
• Manage, organize, and track company equipment, including entering and updating records in our rental software.
• Coordinate with equipment manufacturers to handle repairs, replacement parts, updates, and technical instructions.
• Make sure all equipment is properly charged, maintained, and ready for use.
• Clean and care for company vehicles so they’re safe and presentable.
• Drive to make deliveries and pick up mail as needed.
• Provide clear, friendly demonstrations to clients on how our equipment works and answer basic technical questions.

Systems & operations

• Manage our email filtering software (Barracuda): review quarantined emails, release legitimate messages, and adjust rules when needed.
• Occasionally review and clean up mail coming into shared company inboxes.
• Organize and manage company passwords using our approved tools and security best practices.
• Control access and permissions in Google Drive so team members have the right level of access to files and folders.
• Help manage our Slack workspace by creating and organizing channels and keeping communication spaces clear and useful.

What we’re looking for

• Hands-on experience with mechanical, electrical, or equipment repair (professional or strong hobbyist experience both welcome).
• Comfort using basic tools and diagnostic steps to track down issues.
• Experience with common business tools (Google Workspace, Slack, email/security tools) or the ability to learn them quickly.
• Strong sense of security and confidentiality around accounts, passwords, and company data.
• Valid driver’s license and a reliable driving record.
• Someone comfortable driving vans
• Organized, reliable, and detail‑oriented, with clear and friendly communication.

If you enjoy keeping equipment running, helping people, and keeping systems organized and secure, we’d love to hear from you at Saniset Fleet.

Pay: $20.00 - $25.00 per hour

Benefits:

• Retirement plan

Work Location: In person

$25-30 per hour

Position Summary

We are seeking a seasoned Studio & Equipment Operations Manager with experience in film and photo production environments to oversee daily operations for the Saniset Fleet Offices. The ideal candidate is willing to jump in where needed for last-minute equipment orders and has a proven track record in managing studio equipment and on-location productions, growing revenue, optimizing workflows, and working in a fast-paced production setting.

Key Responsibilities

• Oversee daily operations, ensuring equipment is prepared in time for rental pick-ups and inspections.
• Manage inventory control, maintenance schedules, transportation, and on-time delivery/return of gear.
• Lead the rental functions for our Clean Tech IE Mobile Battery Units, EV Pass Vans, Chargers, and mobile battery equipment.
• Develop, implement, and enforce safety protocols for equipment handling, warehouse operations, and on-set practices to ensure regulatory compliance and a safe working environment.
• Manage and mentor a high-performing operations team, providing training on equipment, software systems, and best practices to drive efficiency and professional growth.
• Maintain and expand relationships with producers, photographers, production managers, digital techs, and other key clients to drive repeat business and long-term partnerships.
• Collaborate closely with sales and business development teams to expand client base, introduce new product and service offerings, and support strategic growth initiatives.
• Implement and refine inventory management and rental management software workflows to improve accuracy, visibility, and turnaround times.
• Monitor operational KPIs (utilization, turn times, revenue per square foot, equipment ROI) and recommend process improvements to enhance productivity and revenue.
• Serve as an escalation point for complex rental, logistics, and technical issues, proposing creative, production-friendly solutions under tight deadlines.- Serve as the primary "fixer" for Tier 1 equipment issues (basic mechanical repairs, cable maintenance, and troubleshooting) to minimize downtime.- Jump into the warehouse or onto the fleet line during peak times to assist with last-minute orders or equipment inspections.

Qualifications

• 5-8+ years of progressive experience in studio operations, equipment rentals, or production services within film, television, or commercial photography.
• Demonstrated success managing multi-studio facilities and/or large-scale photo/film locations, including scheduling, client coordination, and operational oversight.
• Hands-on experience with grip, electric, and lighting equipment, with the ability to recommend appropriate gear packages and troubleshoot technical issues.
• Proven history of driving revenue growth, expanding client bases, and negotiating favorable vendor terms and discounts.
• Strong background in budgeting, cost control, and capital expenditure planning for equipment and facilities.
• Experience leading and mentoring teams in warehouse, rentals, or studio environments, with an emphasis on collaboration and coaching.
• Proficiency with inventory management and rental management software; ability to optimize digital workflows and train staff on systems.
• Excellent communication and client-facing skills, with the ability to conduct walkthroughs, present solutions, and maintain long-term relationships.
• Solid understanding of safety standards, risk assessment, and compliance in production and warehouse environments.

Preferred Attributes

• Bachelor’s degree in a relevant field such as Film, Photography, or related arts/production discipline, is preferred.
• Entrepreneurial mindset with experience building or scaling a department from early stage to seven-figure revenue.
• Track record of introducing new equipment lines, services, or operational capabilities that respond to evolving industry demands.
• Ability to balance strategic planning with hands-on operational problem-solving in a high-volume, deadline-driven environment.

Advancement

• Structured Advancement: This role includes a formal 90-day and 180-day performance roadmap.
• KPI-Driven Increases: We believe in rewarding impact. We will recalibrate your compensation at these milestones based on successfully meeting specific operational benchmarks related to fleet readiness, asset management, and department efficiency.

• Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality.
• Responsible for audits, surveillances and inspections while also working closely with our QA department to ensure integration.
• Reviewing blueprints and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Training the production team on quality control measures to improve product excellence.
• Proposing improvements to the production process.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Updating job knowledge by engaging in educational opportunities and regular training.
• Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs.
• Reading and interpreting engineering drawings and radiographs.
• Using gauges such as calipers and micrometers to measure products.
• Collecting and compiling statistical quality data.
• Assisting in the development of test methods and inspection plans.
• Determining the causes of product defects and reworks.
• Verifying all equipment is calibrated correctly.
• Additional duties as necessary.
  

• Must have at least 5 years' experience in the Quality Assurance/Control field and technical or vocational training.
• Must have a strong understanding of Government Specs.
• Must have extensive knowledge of AWS D1.1 (Structural Steel), D1.2 (Aluminum), D1.5 (Bridge Code), and D1.6 (Stainless Steel).
• Must have knowledge of NAVSEA Standards, QA. & OSHA Standards 29 CFR 1920 (Occupational Safety and Health Standards) & 1915 (Personal Protective Equipment for Shipyard Employment).
• Must have ABS code construction experience.
• Knowledge of NAVSEA Standard Items and Quality Assurance requirements
• Must have a valid Driver's license and a clean DMV record.
• Must have expert knowledge of NAVSEA 009 Standard Items.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

• Performs on aircraft fuel systems removal, repair, and installation maintenance procedures and policies.
• Diagnoses fuel system and component malfunctions. Recommends corrective actions and resolves problems using technical publications and analytic techniques.
• Performs maintenance on aircraft fuel tanks and cells.
• Removes access panels, and depuddles, purges, repairs, and tests fuel tanks and cells.
• Performs entry and maintenance in confined spaces.
• Removes, repairs, and replaces malfunctioning components.
• Prepares aircraft surfaces, and applies sealants, adhesives, and associated chemicals.
• Cleans fuel cells and tanks, and inspects for foreign objects, corrosion, cell deterioration, and fungus.
• Initiates deficiency reports, maintenance analysis documents, technical data changes, and equipment records.
• Possess knowledge in the use of and be able to train others in the use of a wide variety of diagnostics devices, computers, hand and mechanical tools.
• Provide oversight and may direct and train others in the completion of aircraft related maintenance tasks.
• Assist in the repair, inspection and maintenance of structural, mechanical and electrical elements of the aircraft.
• Document maintenance as per Quality Assurance (QA) and established regulatory requirements.
• Stores, handles, and disposes of hazardous waste and materials according to environmental standards and company processes.
• Operates and maintains related aircraft Support Equipment (SE).
• Use automated maintenance systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, document maintenance actions, and time change database.
• Perform regular Foreign Object Damage (FOD) walks.
• Maintain strict tool control procedures. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools.
• Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor.
• Maintain equipment records. Enter in the maintenance records description of the work performed and verify the work was performed satisfactorily.
• May include Designated System Inspector (DSI) duties.
• The Aircraft Fuel System Technician will be required to perform other related duties to meet the ongoing needs of the organization.

• In-depth knowledge of internal hardware such as valves, interconnects, lines, gauges, controls, pumps, and other attachments.
• Strong knowledge of all sealing materials; sheet metal parts; rubber properties and organic sealing compound applications.
• Ability to read and understand all pertinent technical orders and directives as well as the proper handling, use, and disposal of hazardous waste and materials.
• Beginner to intermediate computer skills specifically using Microsoft Office Suite. Ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred.
• Must be able to utilize respirator, forced air, or other breathing equipment during the performance of assigned duties.
• Ability to enter data accurately into databases.
• Ability to read and interpret documents such as engineering drawings, technical documentation, operating and maintenance instructions, and procedure manuals.
• Ability to write routine reports and correspondence.
• Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members.
• Must possess effective oral and technical written communication skills to clearly communicate information to others.
• Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc.
• Ability to follow a process.
• Strong professional customer service skills, including active listening, prompt service and follow-up.
• Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management.
• Ability to learn and understand corporate policies and procedures and how they relate to Yulista goals.
• Ability to perform basic mathematical computations.
• High degree of self-motivation and the ability to work independently.
• Ability to multi-task.

• High School Diploma or equivalent
• Previous Air Force Specialty Code 2A6X4 highly desirable.
• 8+ years of aircraft fuels maintenance experience with fixed wing commercial, Government or DOD aircraft required.
• Experience supporting DoD contracts.
• Must have the ability to obtain and maintain a Government Security Clearance.

Principal Duties/Responsibilities:

* Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

* Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

* Independently performs maintenance as per industry standards.

* Works with Planner Scheduler to optimize preventative maintenance procedures.

* May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

* Complies with 5S and housekeeping standards.

* Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.

* Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

* Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

* Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

* Updates records and reviews CMMS history and analyzes data.

* Completes and conducts on-the-job training and technical self-study programs for career development.

* Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

* High School Graduate or equivalent (GED).

* Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry.

* Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

* Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

* Must be able to use basic hand tools and specialized tools as appropriate.

* Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.

* May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market-leading benefit programs, including Medical, Dental, and Vision plans, PTO, 401 (k) retirement plans with employer matching, tuition reimbursement, and more.

Pay Range

$33.42-$42.75 USD

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Role Title - Quality Control Analyst III, Analytical

Department- QC

Reports to- QC Manager, Analytical

FLSA -Exempt

Salary Range: $80k- $90k

CORE VALUES

Respect ● Passion ● Teamwork ● Integrity ● Honesty ● Commitment ● Collaboration

COMPANY DESCRIPTION

Polaris Pharmaceuticals, Inc., an affiliate of the Polaris Group ( ), is a therapeutic protein drug manufacturer located in Vacaville, California. Polaris has a cGMP facility producing biological study drugs to support all Polaris Group clinical trials at various stages in the USA, Europe, and the Asian-Pacific region.The lead project of the company is now in clinical trials for patients with different types of cancer including mesothelioma, sarcoma, and glioblastoma. Polaris is seeking candidates to help with the production of this protein drug as well as the production of products for our clients and partners.

ROLE SUMMARY

The Quality Control Analyst, under direct or minimal supervision, is responsible for performing biochemical, physical, and chemical evaluations of process development, lot release, and stability samples compliant with cGMP guidelines. The Analyst works independently on assays that he/she has mastered. This position requires willingness to undergo training on more advanced analytical methods and always employs laboratory safety policies. The Analyst will be responsible for the timely completion of assignments. Good record keeping, organizational, written, and verbal communication skills are essential. The analyst must be willing to work overtime as required.

ROLE RESPONSIBILITIES

• Performs, under direct or minimal supervision, biochemical/physical/chemical analyses of test samples under cGMP to meet specified timelines.
• Reviews test data for accuracy, data integrity, system suitability, and conformance against defined criteria/specifications.
• Provides technical support with troubleshooting of test methods, as needed.
• Identify and contribute to OOS/OOE/OOT investigations related to testing performed.
• Initiate and author deviation and laboratory investigations.
• Maintains the laboratory in an inspection-ready state.
• Develops and maintains proficiency in a broad range of trained test methods.
• Train analysts on test methods and procedures.
• Responsible for authoring Change Control records and leading the revision of written procedures as assigned.
• Holds self and others responsible to abide by department and company policies and practices.
• Adheres to cGMP, 21CFR, USP, EP, ICH, and other applicable regulatory requirements.
• Manage reagent and equipment inventory for assigned areas of responsibilities.
• Responsible for sampling and testing of incoming raw materials

SKILLS

• Strong working knowledge of cGMP regulations, including 21CFR 210 & 211, USP, EP, and ICH.
• Ability to follow written instructions and to perform tasks with direct or minimal supervision.
• Works independently as well as in a team environment.
• Familiarity with use of a computer: e.g., Proficient in Windows, Microsoft Word, Excel.
• Good written, verbal, and communication skills.
• Strong documentation skills a must. The analyst must develop skills in the operation and routine maintenance of various analytical instruments and computers.

The analyst must develop the skills necessary to understand the operation of the equipment and gain knowledge of the equipment used for testing and to use these skills in the event of an unexpected result caused by equipment or reagent failure that warrants a laboratory investigation. Experience with Protein analytics, SDS-PAGE, separations technology for HPLC, Chromatography Data Systems (CDS) software such as OpenLab, subvisible particles testing (USP ), and CCIT preferred. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities by this job include close vision, depth perception and ability to adjust focus.

QUALIFICATIONS

B. S./B. A. in Science/Related Field (major in biology-biochemistry-chemistry). Minimum of 5 years of relevant laboratory experience is desired.

Aseptic Fill/Finish | Pharmaceutical Manufacturing | Sterile Injectables

Weekend Day Shift -> Friday - Sunday from 6am to 6pm (10% Shift Differential) (2 openings)

Weekend Night Shift -> Friday - Sunday from 6pm to 6am (15% Shift Differential) (2 openings)

Full-Time, Direct Hire with Full Benefits

A pharmaceutical manufacturing organization is seeking an Equipment Specialist to support sterile drug product manufacturing operations. This hands-on role is responsible for operating, troubleshooting, and maintaining production equipment used in aseptic fill/finish processes. This individual will play a key role in supporting manufacturing operations by ensuring equipment is properly prepared, operating efficiently, and meeting GMP quality standards. The position will also assist with equipment improvements, troubleshooting, and technical support for the production team.

Key Responsibilities

• Set up, operate, and perform changeovers on pharmaceutical production equipment (changeovers are a requirement)
• Support batch start-up activities and execution of manufacturing cycles
• Perform work within controlled manufacturing environments including cleanrooms (Grade A and Grade C)
• Execute aseptic operations within isolator systems when required
• Document manufacturing activities and complete batch records in accordance with cGMP requirements
• Assist with equipment troubleshooting, repairs, and preventative maintenance
• Support validation runs, engineering batches, and equipment qualification activities
• Serve as a technical resource for filling equipment and related manufacturing systems
• Train manufacturing staff on equipment operation and production procedures
• Participate in process improvements and equipment optimization initiatives
• Work with engineering, operations, and quality teams to resolve production issues and maintain operational efficiency

Basic Qualifications

• High school diploma or equivalent required
• Approximately 7+ years of experience working with GMP pharmaceutical manufacturing equipment
• Hands-on experience installing, operating, cleaning, and maintaining production equipment in a regulated environment
• Strong mechanical aptitude and troubleshooting abilities
• Proficiency with basic computer systems (Microsoft Office or similar tools)

Preferred Background

• Bachelor’s Degree in a Science related discipline
• Experience supporting aseptic or sterile injectable fill/finish manufacturing processes
• Working knowledge of cGMP standards and pharmaceutical manufacturing operations
• Familiarity with SAP/ERP, inventory, or manufacturing systems
• Strong communication skills and ability to support cross-functional teams

Work Environment

• Pharmaceutical manufacturing facility supporting sterile drug product production
• Cleanroom and controlled production areas (Grade A and Grade C)
• Weekend manufacturing schedule supporting critical production operations