Assembly Meaning Jobs in Usa

Akkodis is seeking a Printed Circuit Board Assembly Test Technician for a 6 Months Contract to Hire position with a client located in Binghamton NY 13905(Onsite)

Pay Range: $20/hr. - $24/hr on W2(All inclusive). (The rate may be negotiable based on experience, education, geographic location, and other factors.)

Position Summary

• The Printed Circuit Board Assembly (PCBA) Test Technician is responsible for performing complex technical functions related to the assembly, testing, troubleshooting, and repair of printed circuit board assemblies.
• This role supports departmental output objectives by operating PCBA assembly and test equipment, conducting failure analysis, and contributing to continuous improvement initiatives.

Key Responsibilities

• Perform complex technical tasks related to the assembly, testing, and troubleshooting of PCBAs.
• Operate Gen-Rad Test and Flying Probe Test machines.
• Troubleshoot failed PCBAs and assemblies to the component level.
• Utilize assembly prints, mechanical drawings, electrical schematics, and electronic test equipment including: Digital Multimeters (DMMs), Oscilloscopes, Function Generators, Power Supplies, Frequency Counters, Pressure Indicators
• Perform and document failure analysis results clearly and accurately.
• Interpret electrical schematics and/or mechanical assembly prints depending on assigned focus area.
• Demonstrate understanding of electronic component functionality.
• Apply Environmental Stress Screening (ESS) testing concepts.
• Assist in developing production documentation such as work instructions and troubleshooting guides.
• Perform minor repair and maintenance of production and test equipment.
• Provide training and technical support to production operators and technicians.
• Contribute to production goals through effective repair and quality-focused work practices.
• Maintain commitment to quality, attendance, productivity, and customer satisfaction.
• Work overtime as required to meet business demands.

Education & Experience Required:

• High School Diploma or GED
• Minimum two (2) years of experience in production and/or manufacturing environment
• Associate of Applied Science (AAS) in Electrical or Mechanical Engineering Technology
• Experience in manufacturing, testing, and troubleshooting analog and digital circuits in aircraft instruments or electronic systems

Required Skills & Competencies:

• Strong knowledge of prototype assembly drawings and blueprint reading
• Ability to perform soldering and mechanical assembly of complex, critical components
• Willingness and aptitude to become solder certified
• Knowledge of military standards and ISO 9000 quality systems
• Proficiency in electronic test equipment and measurement tools
• Strong troubleshooting and analytical skills
• Effective communication, collaboration, and interpersonal skills
• Self-motivated, fast learner, and capable of working independently
• Continuous improvement mindset with creative problem-solving abilities

If you are interested in this Printed Circuit Board Assembly Test Technician job in Binghamton NY 13905(Onsite) please contact Ashish Rajput at 61 or For other opportunities available at Akkodis, go to Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act

Los Angeles City Fair Chance Ordinance

Los Angeles County Fair Chance Ordinance for Employers

San Francisco Fair Chance Ordinance

Sr. Manufacturing/Assembly Process Engineer

• Develop the plans and work instructions for the successful handling, manipulation, guidance, and general integration of sub-system components
• Assist in finalizing the strategy for each assembly step, as well active collaboration with the system teams to find the optimum assembly steps, tools, methods, strategies, safety measures, specifications, and other details
• Within the plan development, ensuring tool and personnel access is available as required for system assembly steps as outlined by the system owners
• Be responsible for the plans for part movement at each step and checking for no interferences with other systems during movement and part placement
• Be responsible for construction of the assembly work instruction packets for all sub-assemblies, and the incorporation of them into the assembly work orders to create the optimum assembly and testing sequence
• Provide assistance in development and improvement of the work instruction packet and work order creation process to increase standardization, efficiency, safety, clarity, and overall good communication of the instructions for the success of the assembly process
• Participate in collaborative work with the assembly engineers, tooling engineers, designers, coordinators, as well as direct personnel performing the System Assembly during on-site work

Requirements/Experience:

• At least 2 years technical experience in the integration of complex and large mechanical structures (e.g. aerospace, chemical) and experience in work instruction packet creation
• Bachelor’s or associate degree in a related field, metrology, high-vacuum projects and processes, experience with manufacturing management software, NX, large Component (>10 Ton) lifting experience
• Exceptional attention to detail
• Safety conscious and proactive
• An ability to clearly express and critique ideas
• An aptitude to use data to drive decisions
• An emphasis on elegance and simplicity over complexity
• The ability to thrive in fast-paced, dynamic environments

SkillBridge Structural Mechanic in N/A

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Must be eligible for the DOD SkillBridge Program.

You may be eligible to participate in SkillBridge if you: Have 180 days of service or fewer remaining prior to your date of discharge and you have at least 180 continuous days of active Military service. Obtain approval from your unit commander. Agree that participation in the DOD SkillBridge can be terminated at any time by the service if mission requirements dictate.

Education and Experience Requirements

SkillBridge Structural Mech II- 2 years related structural assembly experience.

SkillBridge Structural Mech III- 4 years related structural assembly experience.

SkillBridge Structural Mech IV - 6 years related structural assembly experience.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 230675

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Skillbridge

Posting End Date: 09/27/2025

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Manufacturing Methods Engineer (2nd Shift)

Job Code: 33534

Job Location:Camden, NJ (on-site)

Schedule: 9/80 (every other Friday off)

L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

Job Description:

The Manufacturing Methods Engineer will determine the most efficient and economical method of performing production build and assembly. Review assembly drawings for manufacturability, plan and develop production workflows/ detailed assembly build documentation and adapt or modify existing manufacturing build/assembly documentation to increase efficiency. Provide floor support and on-the-job training to manufacturing assembly operators. Transition new product designs into production. Program and support computer-based production assembly automated equipment. Participate and lead continuous improvement initiatives.

Essential Functions:

• Develop detailed build process documentation from Engineering drawings and schematics.
• Provide direct support to operators during assembly of products.
• Collaborate to solve challenges, reduce defects, and increase efficiency.
• Program automated manufacturing equipment.
• Support new product start-up and readiness process.
• Participate and lead continuous improvement activities.
• Ability to obtain and maintain a security clearance.

Qualifications:

• Experience working with and maintaining SMT equipment and technology.
• Experience programming automated manufacturing equipment.
• Proven ability to read and interpret manufacturing build/assembly drawings.
• Experience with writing detailed manufacturing assembly instructions.
• Minimum two (2) years experience in manufacturing operations environment.
• Proficient with Microsoft Office products (Excel, Word, PowerPoint, Visio, etc.).

Preferred Additional Skills:

• Experience with MYDATA / MYCRONIC Pick & Place Machines.
• IPC-J-STD-001, IPC-A-610, and/or IPC/WHMA-A-620 trained/certified.
• Experience with electronic Product Lifecycle Management (PLM) systems.
• Familiarity with cable & harness assembly and support.
• Basic knowledge of CREO Modeling Software.
• Green-Belt or Lean Six Sigma certified ideal.
• Knowledge of SAP S/4HANA.

In compliance with pay transparency requirements, the salary range for this role is $52,666 - $120,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

#LI-IK1

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking Senior Assembly Advisement Workplace Coaches (Level 4) to join 737 Skill Enhancement Center team located in Renton, Washington.

Position Responsibilities:

• Uses manufacturing and assembly experience in one or more of these areas: mechanical, fluids/pneumatics, electrical integration, quality inspection, machine operations for coaching, performance improvement and problem solving in support of the Boeing Production System

• Analyze and interpret performance and quality data to identify and mitigate the impact of changes on the production system. (e.g. CMES, CORRS, PAS, EPES, TMC, Velocity, Webart)

• Conduct assessments of processes and practices, analyzes and interprets data for improvement opportunities

• Provide feedback on assessment results and find opportunities for improvement and potential areas of risk

• Analyze processes and support Boeing Production System problem solving, develop and document innovative solutions in support of area Q.C.D.S.M. goals

• Assist M&Q managers and team leads with Structured On the Job Training (SOJT) plans

• Support training and coaching solutions to improve employee performance

• Provide Subject Matter Experts for specific M&Q Skills/Disciplines

• Provide instruction, positive modeling, and opportunities for observation in order to help team members and employees. Encourage questions to ensure understanding. Gives timely, appropriate feedback on performance when coaching. Reinforces efforts and progress

• Clarify expected behavior, knowledge, and level of proficiency by seeking, giving information, and checking for understanding

• Establish good interpersonal relationships by helping team members and making internal employees feel valued, appreciated, and included in discussions

• Work at the appropriate level in the organization to implement strategies and plans

• Self-sufficiency, working under minimal direction

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience with Structures Assembly, Mechanical Assembly, Electrical Assembly, and/or Final Assembly

• 10+ years of experience working in a manufacturing environment

• Ability to work 2nd shift

Preferred Qualifications (Desired Skills/Experience):

• 10+ years of experience with aircraft assembly processes, performing hands-on installation and/or assembly is desired (or an equivalent combination of education and experience as outlined above)

• Demonstrated knowledge and expertise in aircraft assembly and inspection processes is critical

• Experience and proficiency reading and interpreting blueprints, drawings, specifications, and templates

• Proficiency with MS Office applications

• Excellent analytical, communication, and problem-solving skills

• Possess manufacturing experience in one or more of the following areas:

  • Mechanical

  • Fluids/Pneumatics

  • Electrical Integration

  • Structures

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Shift:  

This position is for 2nd shift. 

Total Rewards: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. 

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $112,000 to $135,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

The Avionics Hardware team is a small group of highly motivated engineers who develop the core compute, actuation, sensing, and power electronics products at the heart of our automation system. We enjoy cradle-to-grave hardware ownership and hands-on test, iteration, and deployment of our designs. As a Sr Avionics Hardware Engineer, you will lead development of electrical components and sub-systems across our airborne and test platforms from the circuit-board level up through integrated systems and everything in between.

Responsibilities

In your role as Sr Avionics Hardware Engineer, you will design, analyze, document, test, and troubleshoot electronic assemblies at the circuit board through integrated electro-mechanical level. You will collaborate with a cross-functional team of electrical, mechanical, software, manufacturing and test engineers as the expert on your hardware. You will drive improvements to the hardware through benchtop, environmental, and on-aircraft testing, and perform root-cause investigations to characterize, document, and rectify anomalous behavior in a safety-critical environment. You will contribute to continuous improvement of the team's development processes and practices through technical leadership.

Basic Success Criteria

• Bachelor's degree in electrical engineering, computer engineering, or equivalent experience

• 5+ years of full-lifecycle hardware development experience in a professional environment

• Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE

• Ability to work within a team, including excellent written and verbal communication skills

• Ability to methodically diagnose, document, and solve electronic hardware problems

Preferred Criteria

• Advanced degree in electrical engineering or computer engineering

• Experience with aviation development assurance standards (e.g. RTCA/DO-254 for Level A/B items or equivalent)

• Experience designing electronics to meet rigorous environmental standards (aerospace, military, automotive, or harsh industrial)

• Deep expertise in high-speed digital design, mixed-signal design, RF design, and/or power electronics design

• Proficiency with Python and/or MATLAB for analysis, data review, and test setup scripting

• Ability to work both independently and as a leader of a high performing team

We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.

This role is on-site in Mountain View, CA.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $188,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $188K - $250K

Building the people that build the world.

TCI is a global leader in innovative spectrum monitoring and communications intelligence (COMINT) systems. With solutions to ensure the efficient use of frequencies, long distance communications, monitoring and security communications intelligence applications, we improve communications and protect military forces and infrastructure around the world.

How you will make an Impact (Job Summary)

SPX is a diverse team of unique individuals who all make an impact. As the Manufacturing Manager, you will be responsible for the strategy and overseeing the daily operation in EM (Electro Mechanical) assembly and for direct and indirect supervision of the EM assembly personnel. The Manufacturing Manager ensures that products are produced safely, at the highest quality level and cost efficiently and that products are delivered on time. Additionally, the Manufacturing Manager has overall site EHS and facility management responsibility. This is a 100% on-site role.

What you can expect in this role (Job Responsibilities)

While each day brings new opportunities at SPX, your core responsibilities will be:

EM Assembly

• Oversee EM operational systems and processes assuring practices are consistent and processes are followed while looking for opportunities for improvement.
• Formulate EM strategic and operational objectives.
• Collaborate closely with planning, purchasing and warehouse departments.
• Ensure parts are available and ready prior to initiating assembly.
• Resolve issues in their respective areas that prevent EM from starting assembly as planned.
• Lead direct and indirect reports, ten to twenty total employees.
• Set expectations for direct and indirect employees and ensure performance meets expectations.
• Address performance issues, lead hiring and training.
• Anticipates and tracks operational and tactical risks and provides solutions to prevent and mitigate risks.
• Monitor EM KPIs. Creates mitigation plans when measures consistently miss target and/or trend negative.
• Work with Quality Manager to put quality controls in place to ensure EM tasks are performed on-time at the highest quality level while finding ways to improve quality.

Facility

• Communicates and coordinates with landlord the repair & maintenance of the building/grounds including emergency and preventive type repairs and ensuring work is completed appropriately and on-time.
• Monitors the safety and cleanliness of the interior and exterior areas including custodial functions.
• Manages and reviews facility service contracts.
• Ensures facilities inspections are completed, results documented and corrections executed as needed.

EHS

• Organizes and leads the Safety Team.
• Assist Human Resources as needed to ensure employees conduct annual safety training.
• Be the site liaison to Corporate EHS team.
• Ensure security and emergency preparedness procedures are implemented properly.
• Be the liaison to OSHA, includes submission of annual reports and notification of incidents.

What we are looking for (Experience, Knowledge, Skills, Abilities, Education)

We each bring something to the table, and we are looking for someone who has:

Required Experience

• Minimum of seven years’ work experience in manufacturing leadership role.
• Minimum of two (2) years managing a staff, proven success in leading teams and improving performance.
• Experience working in with Microsoft Word, Excel, PowerPoint, Teams, and Outlook.

Preferred Experience

• Experience in electromechanical assembly. More weighted to electro than mechanical.
• Experience in an operation that uses a MRP system.
• Experience with Oracle’s on prem or cloud MRP system.

Preferred Knowledge, Skills, and Abilities

Primary

• Must be hands on. Willing to jump in at any time to perform any task expected of subordinates. Willing and able to have high presence on the assembly floor.
• Deep and broad knowledge of planning, materials and quality functions.
• Demonstrates high performance traits; drive, organization, methodical and concentration.
• Knowledge of assembly, PCBA, cables/harnesses and metals.
• Ability to solve practical problems and deal with a variety of variables.
• Knowledge of MRP systems and associated operational processes.
• CI (Continuous Improvement) mentality, recognize where change is needed, drive change, take change risks.
• Must have knowledge of Microsoft Office applications.

Secondary

• Able to understand mechanical drawing, electrical schematics and assembly procedures.
• Ability to effectively present information in one-on-one situations to direct reports and peers.
• Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
• Ability to multi-task in a high-paced environment.
• Ability to work both independently and collaboratively with a team.
• Working knowledge of ISO 9001 requirements and applying to operations.

Education & Certifications

• Degree from two- or four-year university/college in engineering, manufacturing, or similar technical area
• Must be a U.S. citizen or Permanent Resident

Travel & Working Environment

• Travel – less than 10%.
• Work is performed primarily in an office and/or warehouse environment. While performing the duties of this job, the employee is regularly required to talk and listen. The employee frequently is required to sit, stand, lift, twist, bend, walk, operate a computer keyboard, telephone and other office equipment for extended periods of time.

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

The compensation information that follows is a reasonable estimate for the position and is provided pursuant to legal requirements in this state. The salary estimate provided represents the typical salary range for the position, and other factors may be used to determine the successful candidate’s actual salary, including: skill set, experience, training, education, organizational needs, internal equity, market data, and geographic zone. The estimated salary range for this position is: $170,000 - $190,000. At SPX, it is not common for individuals to be hired at the higher end of the range, and compensation decisions depend on a variety of factors. This role is eligible to participate in a discretionary bonus plan, subject to the rules governing the plan. SPX offers a variety of benefits, including health benefits, 401k retirement with a company match, and flexible time off. More information about our benefits can be found on the “Rewards and Benefits” section of the career page.

How we live our culture

Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX.

What benefits do we offer?

We know that the well-being of our employees is integral. Our benefits include:

• Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave
• Competitive health insurance plans and 401(k) match, with benefits starting day one
• Competitive and performance-based compensation packages and bonus plans
• Educational assistance, leadership development programs, and recognition programs

Our commitment to embrace diversity to build a culture of inclusion at SPX

We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential.

SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

Summary of Position

“Quality and safety above everything”. That is the unassailable theme that guides everything that we do, every day. We have an unwavering commitment to quality and the production of safe and effective products. Our science and risk-based compliant quality culture is flexible, innovative, and healthcare oriented. Whether you are involved in development, maintenance, compliance or analysis through research programs, your contribution will directly impact our success.

Pherros Biosciences has built a completely new, inspiring, environmentally conscious, and highly automated facility in Deerfield Beach, Florida. This brand-new facility will utilize state of the art technology to engage in parenteral (injectable) pharmaceutical production and packaging operations. This is an exciting and once-in-a-lifetime opportunity to help initiate and operate a new site.

There are numerous positions available for entry, mid-level and supervisory roles in manufacturing operations. The Manufacturing Science Associate will engage in various aspects of pharmaceutical production, including formulation, aseptic filling, visual inspection and secondary packaging, as well as equipment and process implementation activities required to bring the facility into service. Manufacturing Science personnel will be responsible for ensuring continuous supply of our medicines by expertly running the processes, troubleshooting, collaborating cross-functionally, and adhering to our safety first / quality always mindset. Senior and lead Manufacturing Science personnel will coordinate daily activities to meet capacity plans while developing their own as well as the team’s capabilities.

A Manufacturing Science Supervisor is expected to have experience in performing the responsibilities of a Manufacturing Science Associate but also provide daily supervision of areas within manufacturing, maintain responsibility over production timelines and achieve department goals. This includes process planning activities, setting schedules, coordinating interactions and services from other internal and external groups, and assigning daily work tasks. Additional responsibilities will be hiring, development, coaching/leading, and training of manufacturing operators in the assigned area.

Your Diligence Means Our Success

You will be a member of Pherros’ dedicated and highly effective manufacturing operations team. You will evaluate, review and engage in the manufacturing and production of life-changing pharmaceuticals. It is your problem-solving skills that will make us ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

As a Manufacturing Science Associate, you will be part of a team that will execute batch release processes in the course of internally manufactured products. You will ensure drug product manufacturing is carried out in a compliant manner in accordance with current Quality Standards and current Good Manufacturing Practices (cGMPs). Additional specific responsibilities include:

• Engagement in operations on the manufacturing floor ensuring high level of safety, quality, and productivity to maintain production and a reliable supply of products to patients.
• Responsibility for maintaining a safe work environment, exemplifying safe working practices, and being accountable for supporting manufacturing and safety goals.
• Setting a good example through demonstrated knowledge of procedures, compliance with quality systems, and teaching of proper techniques.
• Being a technical leader: Key resource for troubleshooting and functions as the primary point of contact for issue escalation on the shop floor.
• Engaging in manufacturing investigations and implementing corrective and preventative action (“CAPA”) plans.
• Operating the equipment and performing activities as required to meet production schedule.
• Completing and assisting in checking execution documentation (Electronic Batch Record, SAP, Cleaning Logs)
• Driving key departmental objectives including improving safety performance, reducing deviations, improving productivity, and training compliance.
• Supporting Site Leadership to build a diverse and capable site organization by delivering area operational procedures, quality processes and controls.
• Acting as a liaison between operations and support functions.

The responsibilities of a Manufacturing Science Supervisor would include those of a Manufacturing Science Associate, and:

• Ensure production activities comply with cGMP guidelines. Follow all documentation and standard operating procedures. Set priorities, process execution, work assignments, and reprioritize as required.
• Responsibility for providing support to their respective process team.
• Responsibility for cGMP compliance, ensuring that all production equipment is properly validated, and procedures are maintained within validated state.
• Author and revise standard operating procedures and batch records. Review technical reports. Conduct deviation investigations and write process deviation reports.
• Ensure that all production equipment is properly maintained, production areas are inspection ready, and production processes meet quality standards.
• Train personnel in manufacturing process/operations following standard operating procedures and cGMP guidelines.
• Measure and appraise operator performance against job duties, objectives, and goals. Provide accurate and timely feedback. Recommend merit increases, promotions, hires, and terminations.
• Serve as a manufacturing advocate in cross functional meeting and champion company policies to area staff.
• Contribute and adhere to safety, environment, and quality of the Company.
• Communicate safely and maintenance problems., status of operations, and employee-related issues in a timely manner to management.

Qualifications

Must-Have

• We have several levels open for Manufacturing Science Associates and Supervisors which are based on the experience and education you bring.
• Minimum education: Bachelor’s Degree in a scientific discipline such as Biology, Biochemistry, Chemistry or other related discipline, or a High School Diploma/GED equivalent with more than five (5) years of relevant work experience.
• Ability to effectively communicate (electronically, written and verbal)
• Flexibility - the ability to troubleshoot and triage challenges
• Computer proficiency (desktop and tablet software, MS office, quality management system (“QMS”)).
• Must pass a vision exam and be free of color blindness
• Must be equivalent to 20/20 correctable close vision acuity
• Must Pass a “fitness for duty” physical exam
• When in full operation, must have the ability to accommodate longer shifts on a rotating basis when necessary
• Ability to work overtime as required
• Ability to wear safety equipment (glasses, gowns, shoes, gloves, head and face covers, etc.)
• Ability to work and gown in a cleanroom (Grade A-D, Class 100,000 – Class 100; ISO 5 - ISO 8) environment.
• Qualified candidates must be legally authorized to be employed in the United States.
• Pass routine drug-testing suitable for manufacturing personnel.
• Must meet the physical requirements of the job; must have the ability to:
• Lift a minimum of 30 lbs.
• Bend, reach, stretch, climb ladders, and work in tight spaces.
• Stand for long periods.

Nice-to-Have

• (Senior and Lead roles) Leadership and the ability to train / educate team members
• STEM degree or certifications
• Aseptic filling, single use assemblies, isolator technology.
• Automated, semi-automated, and/or manual inspection.
• Knowledge of current Good Manufacturing Practices (CGMPs)
• Experience in operations or manufacturing environments.
• Pharmaceutical, medical device or food processing industries
• Manufacturing Execution Systems and electronic batch release.
• Continuous improvement (Lean, Six Sigma methodologies)
• Highly automated equipment (inspection, packaging, filling, assembly, etc.)
• SAP, Master Control or other QMS, Electronic Batch Records

Other Job Details

 Work Location: On Premises, Full Time

Sunshine Act

Pherros Biosciences reports payments and other transfers of value to health care providers as required by federal and state transparency laws and implementing regulations. These laws and regulations require Pherros to provide government agencies with information such as a health care provider’s name, address and the type of payments or other value received, generally for public disclosure. Subject to further legal review and statutory or regulatory clarification, which Pherros intends to pursue, reimbursement of recruiting expenses for licensed physicians may constitute a reportable transfer of value under the federal transparency law commonly known as the Sunshine Act. Therefore, if you are a licensed physician who incurs recruiting expenses as a result of interviewing with Pherros that we pay or reimburse, your name, address and the amount of payments made currently will be reported to the government. If you have questions regarding this matter, please do not hesitate to contact your Talent Acquisition representative.

EEO & Employment Eligibility

Pherros Biosciences is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status. Pherros Biosciences also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as work authorization and employment eligibility verification requirements of the Immigration and Nationality Act and IRCA.

Manufacturing Science

Pherros Biosciences careers are like no other. In our culture of individual ownership, we believe in our ability to improve future healthcare, and potential to transform millions of lives. We are looking for new talent to join our global community in order to unearth new innovative therapies that make the world a healthier place.

#wearepherros

Senior Supply Chain Manager

Location: San Leandro, CA

About the Company

Our client is a Series A startup building robots that build solar farms. This is a fast-moving company, which means constant opportunities for learning and growth. You’ll have a large impact on the direction of the company, and will be compensated accordingly. The company is MIT-founded and backed by top generalist and climate tech investors, including Energy Impact Partners, Founders Fund, Lux Capital, and Y Combinator (S21). If you are excited to work on interesting problems with direct climate impact, you’re going to fit right in with this team.

Key Responsibilities

• Drive end‑to‑end supply chain strategy for hardware/robotic systems, balancing cost, quality, delivery, and risk across custom and off-the-shelf component inputs
• Build, maintain, and continuously improve the company’s Bill of Materials; implement should‑cost/clean‑sheet models; drive PPV tracking and BOM roll‑ups that tie to finance
• Preempt supply chain bottlenecks by proactively planning for future system builds
• •Identify and mitigate risk across the supply base (single‑source, geopolitical, commodity volatility); create continuity plans and buffer strategies aligned to program schedules
• •Develop and execute category strategies, multi‑source/dual‑source critical parts, and negotiate capacity reservations, LTAs, and commercial terms
• •Drive down cost and lead time via creative sourcing, contract structure, and negotiation
• Help build a high‑performing team covering procurement, vendor management, expediting/execution, receiving, and accounts payable
• •Stand up scalable supplier management: scorecards, reviews, corrective actions, and supplier development to improve OTD and cost
• •Continuously improve accounts payable processes: vendor onboarding, COIs/W‑9s, credit/terms, POs, receiving
• •Coordinate closely with finance to manage equipment lease processes without slowing procurement
• Partner tightly with Design, Manufacturing, and Field Ops to flow R&D → production: integrate DFM/DFA and ECOs; ensure part readiness and ramp capacity
• Establish the operating system for materials: demand planning, MRP, and inventory policies (cycle counts, location control, kitting), and logistics strategy

Required Qualifications

• Operate effectively in the fast‑paced environment of a rapidly growing startup, with technical aptitude and excellent written and verbal communication
• Feel energized by a mission to accelerate the clean energy transition through automation
• Bring 5+ years in hardware/industrial/manufacturing supply chain roles, including 2+ years leading teams with measurable cost, delivery, and quality outcomes
• Are a strategic supply chain leader who is equally comfortable building the long‑term architecture and diving into the BOM to find dollar‑level savings
• Have deep experience with BOM costing across mechanical and electrical categories (fabrications, machining, harnesses, purchased assemblies)
• Are a sharp negotiator who can structure LTAs, capacity reservations, and pricing mechanisms that survive scale‑up and market swings
• Build clear processes and simple, scalable systems, owning data quality and driving disciplined S&OP/MRP execution
• Are fluent with ERP/MRP and source‑to‑pay concepts (items, AVL, lead times, safety stock, three‑way match, receiving) and comfortable partnering with Finance on reconciliations and cash forecasting
• Translate engineering changes into material plans and supplier actions; you understand ECOs, DFM/DFA, and the realities of prototype → production ramp
• Are based in or can relocate to the SF Bay Area

Preferred Qualifications

• Have scaled a supply chain function from one to n production for complex mechanical systems
• Have experience with complex industrial robotics/automation assemblies, and/or very large-scale components
• Have worked with MES/PLM/AP systems (e.g., ION, Silkline) and understand how to keep item and revision data in sync across engineering and ERP
• Have experience managing and helping build a team
• Have implemented VMI/consignment and/or kanban; understand import/export logistics and incoterms
• Are comfortable modeling in Excel (costed BOMs, PPV, sensitivity) and presenting insights to executives and the board

Compensation

Base pay is one element of the Total Rewards package which will also include comprehensive benefits and equity. The annual base salary range for this position is from $130,000 - 180,000. The actual base pay offered will be determined on factors such as years of relevant experience, skills, education, etc.

Equal Opportunity Employer - From the Company

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Berkner Group has been retained to execute this search. If you were contacted by Berkner Group, please reply to the person who contacted you. If you are applying to a job posting, please email your resume and a brief introduction to Please include your name and the title for this position ([Your name] - Sr. Supply Chain Manager - 7X4VW9W5) in the subject line of your email. We look forward to hearing from you!

PRECONSTRUCTION MANAGER

About Level 3 Construction

Level 3 Construction is a next-generation commercial contractor recognized for leveraging technology, innovation, and process excellence to deliver superior results in hotel renovations, affordable housing, student housing, senior housing, multifamily, and mixed-use projects throughout California. We value integrity, transparency, entrepreneurial thinking, continuous improvement, and cultivating strong, long-term client and subcontractor relationships. We are committed to a safe, inclusive, and growth-oriented work environment.

Position Overview

The Preconstruction Manager leads estimating, budgeting, design coordination, value engineering, procurement strategy, and risk management for assigned projects. This role is responsible for delivering accurate budgets, competitive bids, clear cost models, and well-coordinated construction documents that support a seamless transition to operations.

The Preconstruction Manager plays a critical leadership role in guiding the project from concept through contract execution, working closely with clients, architects, engineers, subcontractors, and the Level 3 project team.

Key Responsibilities

1. Leadership & Preconstruction Strategy

·        Leads the overall preconstruction process for assigned projects, including estimating, cost planning, design coordination, project phasing, and schedule development.

·        Establishes preconstruction deliverables, internal milestones, and client communication plans.

·        Provides strategic recommendations to support client decisions regarding cost, design, and schedule.

2. Design Coordination & Document Management

·        Works collaboratively with architects, engineers, and consultants to drive design development from concept through permit/bid-ready documents.

·        Reviews drawings for accuracy, completeness, constructability, code compliance, and alignment with owner requirements.

·        Identifies missing information, scope gaps, potential conflicts, and opportunities for improvement.

·        Facilitates design milestone meetings and interdisciplinary coordination.

3. Cost Planning, Budgeting & Forecasting

·        Prepares conceptual, schematic, DD, and CD-level budgets using historical data, benchmarking, and cost modeling.

·        Tracks and updates budgets as design progresses; communicates cost impacts of design changes.

·        Conducts detailed quantity take-offs, subcontractor solicitations, bid leveling, and complete estimate assemblies.

·        Analyzes general conditions, logistics requirements, temporary facilities, and staffing needs.

4. Value Engineering & Alternative Analysis

·        Identifies cost-saving opportunities without compromising quality or performance.

·        Evaluates alternative systems (structural, envelope, MEP, interior assemblies, finishes, etc.).

·        Provides comparative cost analysis, life-cycle considerations, and schedule impacts.

·        Maintains a structured VE log and leads VE review meetings with owners and design teams.

5. Schedule Development & Phasing

·        Develops preconstruction schedules including design milestones, permit timelines, procurement strategies, long-lead items, and phasing.

·        Collaborates with operations to ensure alignment between preconstruction and field execution.

6. Procurement Strategy & Subcontractor Engagement

·        Creates bid packages, qualification requirements, and scope sheets.

·        Solicits and evaluates subcontractor bids; performs detailed bid leveling.

·        Maintains accurate subcontractor databases and actively improves bid coverage.

·        Prequalifies subcontractors based on workload, safety record, financial strength, and past performance.

7. Risk Identification & Mitigation

·        Conducts project-specific risk analyses covering design, schedule, budget, site logistics, and market risk.

·        Maintains a project risk register and proactively recommends mitigation strategies.

·        Identifies long-lead materials and supply-chain vulnerabilities.

8. GMP Development & Contract Support

·        Prepares GMP proposals, including assumptions, clarifications, allowances, alternates, and exclusions.

·        Ensures contract values accurately represent scope, design status, and risk profile.

·        Supports contract negotiation with clients, design teams, and subcontractors.

9. Client Interface & Relationship Management

·        Serves as primary client contact during the preconstruction phase.

·        Provides clear, transparent reporting on cost updates, design status, risks, and decisions required.

·        Builds trust and long-term relationships with clients, developers, architects, and industry partners.

·        Represents Level 3 at industry events, presentations, and proposal interviews as needed.

10. Project Handoff to Operations

·        Leads a formal transition to the Project Manager, Superintendent, and Operations Team.

·        Provides complete turnover documentation.

Ensures operations clearly understands project scope, constraints, and critical path items.

11. Technology, Process, & Innovation

·        Utilizes Procore, ProEst, Bluebeam, Salesforce, and other Level 3 technology platforms.

·        Maintains and improves historical cost databases and estimating standards.

·        Supports Level 3’s mission to leverage automation, analytics, and AI tools to enhance accuracy and efficiency.

·        Helps develop internal preconstruction workflows, templates, and best practices.

12. Mentorship & Team Development

·        Supervises and develops junior estimators and preconstruction staff.

·        Reviews estimates for accuracy, completeness, and alignment with Level 3 standards.

·        Leads internal training sessions and promotes continuous improvement.

Qualifications

·        Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.

·        5+ years of relevant estimating or preconstruction experience.

·        Strong understanding of construction means, methods, sequencing, and costs.

·        Ability to read and interpret plans, specifications, and technical documents.

·        Proficient with estimating and construction software (ProEst, Bluebeam, Procore preferred).

·        Excellent written and verbal communication skills.

·        Strong leadership, decision-making, and problem-solving abilities.

·        Ability to manage multiple projects simultaneously while meeting deadlines.

·        Experience with negotiated work, CMAR, design-build, and hard-bid procurement is preferred.

Why Join Level 3 Construction

·        Entrepreneurial, growth-focused, technology-forward environment

·        Opportunity to help shape the future of the preconstruction department

·        Diverse project types and high-impact leadership role

·        Commitment to employee development and long-term career growth

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

• Conduct continuity checks to ensure proper functionality of electrical systems.

• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.

• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

• Perform hand forming of electrical wiring and soldering as required to complete work assignments.

• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.

• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

• 1+ years of experience handling chemicals and/or hazardous materials.

• Ability to recognize colors.

• Ability to work in confined spaces.

• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are seeking a Lead Industrial Engineer to develop and implement efficient production methods and process controls for new and existing assembly operations. In this hands-on role, you will monitor assembly processes, troubleshoot issues, and drive quality improvements. You will serve as a technical expert on various manufacturing projects, introducing new technologies and establishing sustainable processes for long-term production. Your mission will be to ensure profitability, efficiency, adaptability, responsiveness, and high quality across all products and processes through continuous improvement initiatives.

This position is part of the core team launching new manufacturing technologies at our production facility in Florence, KY. It is a fully on-site role, and relocation assistance is available for candidates who live more than 50 miles from the Florence area. The ideal candidate has experience in high-level assembly, testing, and integration of highly complex electronic hardware infrastructure. This is a senior individual contributor position, requiring someone who can collaborate cross-functionally in a fast-paced, high‑constraint environment to deliver data-driven process improvements.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Develop and implement procedures for complex hardware assemblies to validate system integrity and maintain compliance with industry standards and customer quality specifications.

• This role is operationally focused, working closely with leads within Test Engineering and Quality Engineering to drive process test optimization, improvement and execution to plan.

• Improve manufacturability, reduce cycle times, and enhance reliability of complex server rack assemblies.

• Implement and optimize assembly processes to improve efficiency, reliability, safety, and sustainability.

• Identify and resolve bottlenecks or inefficiencies in production and workflows to maximize FPY, throughput, and quality.

• Support Business Development through assessing the needs of potential customers in conjunction with the Engineering Manager and Engineering Leads.

• Design, configure, and monitor process performance during both manufacturing and operational phases, ensuring processes run within specified parameters.

• Develop and maintain detailed process documentation, including work instructions, flow charts, and control plans for all critical processes.

• Implement process improvements to reduce energy consumption, minimize waste, and lower operational costs while maintaining quality standards.

• Monitor key process parameters to ensure compliance with operational thresholds and promptly address deviations.

• Analyze process data to identify trends, predict failures, and support preventive maintenance strategies for equipment and systems.

• Develop and manage a comprehensive maintenance plan for all process-related equipment and assets, ensuring high uptime and reliability.

• Conduct Critical-to-Quality (CTQ) analyses and risk assessments for all process steps to identify potential failure modes and quality improvement opportunities.

• Own the full lifecycle of process equipment, including selection, commissioning, monitoring performance, troubleshooting issues, and coordinating servicing or upgrades as needed.

• Support the commissioning and validation of new server rack systems and upgrades, ensuring they meet design specifications and integrate smoothly into production.

• Work closely with cross-functional teams (manufacturing, design, quality, and maintenance) and utilize data-driven insights to drive continuous process improvements and implement changes that enhance overall production performance.

REQUIRED QUALIFICATIONS

• Education : Bachelor’s Degree in Industrial Engineering, Mechanical Engineering, Industrial Automation, or a related engineering discipline.

• Experience : 8 years of transferrable experience in a process engineering, manufacturing engineering, or industrial engineering capacity within a manufacturing environment (with Bachelor's Degree) OR 6 years of transferrable experience in a process engineering, manufacturing engineering, or industrial engineering (with Master's Degree). Equivalent combinations of education, training, and relevant experience may be considered.

• Proven experience with complex system assembly in a manufacturing setting, ideally involving computer/server hardware or server rack infrastructure.

• Proficiency with process control systems, instrumentation, and various sensor technologies used in monitoring and automation.

• Demonstrated experience with DMAIC methodology, root cause analysis, and other continuous improvement tools/methodologies (Kaizen, 5-Why, FMEA).

• Excellent analytical skills, with strong communication and technical writing abilities for documenting processes and reporting results.

• Ability to influence cross-functional teams and stakeholders using data-driven insights to drive process changes and improvements.

• Proven ability to excel in a highly constrained, fast-paced production environment while managing multiple priorities and meeting deadlines.

• Hands-on mindset and teamwork orientation, with a willingness to be on the factory floor engaging directly with equipment and processes.

PREFERRED QUALIFICATIONS

• Experience with assembly, testing, and integration of highly complex electronic hardware infrastructure.

• Certification in Six Sigma (Green Belt / Black Belt) or formal training in Lean Manufacturing principles.

• Experience with 3D CAD modeling tools (SolidWorks) for designing fixtures, layouts, or process equipment modifications.

• Familiarity with ISO 9001 quality management standards and related regulatory compliance requirements in a manufacturing setting.

• Familiarity with Building Management Systems (BMS) and Manufacturing Execution Systems (MES), especially as they relate to monitoring environmental controls and production processes.

PHYSICAL DEMANDS

The physical demands described here are representative of those required to successfully perform the essential functions of this job. The employee is frequently required to walk and may lift or carry PCs and test equipment weighing up to 50 lbs. Specific vision abilities required include close vision and extended use of computer monitor screens.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. The primary workstation is located on the manufacturing floor, with some time spent in an office setting. The noise level ranges from low to moderate. Required PPE in the manufacturing area includes: composite-toe shoes, hearing protection, protective eyewear, and an ESD vest. The manufacturing floor is modern, climate-controlled, and well-lit.

COMPANY BENEFITS

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities