Assembly Machine Code Example Jobs Remote Jobs Full Time Jobs in Usa

• 
  
• Performs duties by verbal or written instructions.
  
• Crimps, screws, welds, solders, cements, press fits, or performs similar operations to fasten parts together.
  
• Assembles or attaches various hardware such as caps, clamps, tape, lugs, connectors, etc. to assemblies.
  
• Tends to machines that shape, press, insert, wind, or weld component parts.
  
• Sorts, packs, and records production information.
  
• Maintains acceptable levels of production according to established standards.
  
• Assists other associates when needed.
  
• Maintains dialog with lead personnel on status of work and raw material to ensure efficiency.
  
• Practices good safety and housekeeping procedures and adheres to all established policies and procedures.
  

• 
  
• Good communication skills and ability to understand verbal and written instructions.
  
• Ability to stand, walk, kneel, and work over equipment for long periods of time.
  
• Ability to work with and handle very small parts (.003 diameter).
  
• Ability to work with hand tools and possibly run a semi-automated machine.
  
• Ability to learn and understand dimensions on drawings.
  
• Ability to lift up to 20 lbs.
  
• Ability to determine / recognize color coding.
  
• Basic math and measuring skills.
  
• Must be a good team player and have the ability to work with people of diverse backgrounds.
  

• HS Diploma (or equivalent) preferred.

• 
  
• Assemble compressors in assigned area using Work Center Instructions (WCI), Piping & Instrumentation instructions (P&I), Wiring Diagram (WD) and Bill of Material (BOM) and assembly drawings.
  
• Apply decals to machines, as needed.
  
• Utilize Andon signals per guidelines.
  
• Measure, cut, bend, fit small tubing to machine. Install tubing and fittings using hyferset.
  
• Install foam insulation on tubing and controls.
  
• Install heat trace tape to tubing and controls AND/OR bend large tubing with power bender per print or custom fit (Industrial).
  
• Assemble frames in assigned area, per BOM, or WCI.
  
• Assemble separator tanks in assigned area, using BOM, P&I or WCI.
  
• Assemble components to engines in assigned area, per BOM or WCI.
  
• Connect motor leads and connectors to power source per WD and BOM.
  
• Wire machines or packages, terminating wire harnesses or basic wiring in assigned area, per WD.
  
• Assemble couplings on engines/motors and air ends in assigned area, per WCI, BOM.
  
• Inspect finished machines at the end of process in assigned area, and receive them into finished goods.
  
• Align motor, air end and coupling in assigned area, using calipers, dial indicators and straight edge.
  
• Assemble and insulate enclosures and install on machine in assigned area, per BOM, WCI.
  
• Assemble mounted or remote cooler packs in assigned area, per BOM, WCI, WD and P&I.
  
• Terminate wiring for controls, basic panels, fan motors, etc. in assigned area, per WD and P&I.
  
• Test electrical controls/components per WCI, WD and P&I.
  
• Assemble and/or rework compressor packages and equipment.
  
• Requisition and stock materials and supplies.
  
• Keep equipment and work area clean and orderly.
  

• High School education or equivalent and a minimum of two years year post high school training/experience.

• 
  
• Minimum of five years' previous manufacturing assembly required.
  
• Basic computer skills required.
  
• Basic reading skills necessary to perform the functions of the job.
  
• Mechanical assembly ability, ability to read simple blueprints, wiring diagrams/drawings preferred.
  
• Prior forklift experience or completion of forklift training preferred.
  
• Working with various hand and pneumatic tools and various measuring tools.
  
• Ability to read blueprints.
  
• Knowledge of basic electricity and wiring diagrams/drawings.
  

• 
  
• Lifting up to 35 lbs.
  
• Lifting over 35 lbs. requires a lifting device, crane/hoist, or assistance from another associate.
  
• Physically able to lift, bend, stoop, climb, reaching, kneeling and working in awkward positions.
  
• Work involves considerable stooping, bending, and kneeling.
  
• Working with cranes, presses, cleaning solvents, sharp edges on parts, hot materials, electrical components, and moving parts by carts.
  
• Working with high air pressure equipment, and at times extreme noise.
  
• Safety Requirements:
  • 
    
  • Must understand and comply with the 5 Cardinal Rules.
    
  • Participate in EHS quarterly audits, if required.
    
  • Required to wear the proper PPE equipment for the work area.
    
  • Required to attend scheduled toolbox and safety meetings.
    
  • Must immediately report injuries or unsafe conditions to the supervisor.
    
  
  
  

• N/A

Hazelett Strip Casting Machines combine the functions of mechanical, electrical, heat transfer and automation to produce materials for many applications. Our continuous casting process is renowned for its high productivity and energy efficiency. We pride ourselves on our robust machine design and in-house manufacturing and assembly capabilities. The materials produced by our machines are used in many applications such as aluminum automotive components, aluminum foil products, lead-acid automotive batteries, and copper wire. If you are detail-oriented and quality-conscious individual with a strong work ethic, let’s connect!

What you will do:

• Maintain a safe, organized, and clean work environment.
• Reads and interprets blueprints, sketches, and CAD design.
• Select appropriate cutting tools, work holding fixtures, and materials for the job.
• Loading material into CNC machines and performing safe and accurate set-up.
• Performs a variety of complicated tasks with the use of complex measuring equipment.
• Operating lifting devices in a safe manner (forklifts, overhead cranes).
• Willing to work Overtime when required to meet deadlines.
• Other duties as assigned.

We are hiring for all shifts to work full time:

1st Shift, flexible schedule options:

• 5x8 Mon – Fri (7:30 am – 4:00 pm)
• 4x10 Mon-Thu / Tues-Fri (6:30 am – 5:00 pm)

2nd and 3rd shift available, 4x10 schedule options Monday - Thursday: *20% shift premium

• 2nd Shift: 4:45 pm – 2:45 am
• 3rd Shift: 8:45 pm – 6:45 am

What you will bring:

• A “Safety First” mindset
• 3+ years of CNC & Manual Machining Experience with tight tolerance and various materials.
• Ability to interpret code/programs and make minor adjustments when necessary.
• Experience using precision measuring equipment (verniers, micrometers, bore gauge, depth gauges, etc.)
• Ability to work in a physically demanding environment, including standing for long periods and performing repetitive tasks.
• Strong communication and interpersonal skills (written & verbal)
• Blueprint Reading, ability to follow written procedures and verbal instructions.
• Forklift, overhead crane, & rigging experience
• Familiarity with common PPE
• Basic understanding of quality control principles.

What we offer you:

20% shift premium.

• Hazelett offers 24 plans through its medical coverage and for most of the plans, Hazelett pays 100% of the premiums.
• Hazelett pays 100% of Dental Premiums for one of the best plans in the state.
• Life, AD&D, Short-Term Disability Insurance.
• Matching 401k after 90 days. Fully vested since you start contributing!
• 8 Company Holidays.
• 4 weeks of paid time off.
• On-site Athletic Trainer.
• Free uniforms with cleaning.
• Free use of our company beach on Malletts Bay and boat mooring at a discounted price.

Why you want this opportunity:

At Hazelett you will have the opportunity to work for a company that is recognized worldwide for our leading metals processing technology. Our continuous casting process is renowned for its high productivity and energy efficiency. We pride ourselves on our robust machine design and in-house manufacturing and assembly capabilities. The materials produced by our machines are used in many applications such as aluminum automotive body components, aluminum foil, lead-acid automotive batteries, and copper wire and cables.

Hazelett is passionately committed to a diverse, equitable, and inclusive work culture. Join us in building a community where differences are our strength, and where everyone has an equal chance to thrive.

Harris & Bruno International (H&B), a printing equipment and spare parts manufacturer, is seeking full-time CNC Machinist III ($30-$35 p/h) & CNC IV/Programmers ($36-$45 p/h). See below for both job descriptions.

CNC Machinist III ($30-$35 P/h)

This is a highly skilled, senior-level machinist responsible for setting up and operating CNC equipment to manufacture precision components. This role serves as a technical expert on the shop floor, leading complex machining projects, troubleshooting issues, and mentoring junior machinists to ensure quality, efficiency, and continuous improvement.

Expectations

• Set up and operate CNC mills for complex, tight-tolerance parts
• Edit and optimize CNC programs (G-code or CAM-generated)
• Interpret advanced engineering drawings, GD&T, and specifications
• Select appropriate tooling, fixtures, and machining strategies
• Perform first article inspections and in-process quality checks using precision measuring tools
• Troubleshoot machining issues, including tooling, programming, and material challenges
• Optimize cycle times and improve manufacturing processes
• Lead or support continuous improvement initiatives (lean, 5S, etc.)
• Train, mentor, and provide guidance to CNC Machinist I & II team members
• Collaborate with engineering and quality teams to resolve design or production issues
• Maintain equipment and ensure proper machine upkeep
• Follow all safety and quality procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training or apprenticeship preferred)
• 5–10+ years of CNC machining experience in a manufacturing environment
• Advanced experience with CNC mills (multi-axis preferred)
• Basic programming skills (G-code and/or CAM)
• Deep understanding of GD&T and blueprint reading
• Proficiency with precision measurement tools (micrometers, calipers, height gauges, CMM exposure a plus)
• Experience machining a variety of materials (aluminum, steel, stainless, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently with minimal supervision

Preferred Qualifications:

• Experience with 4-axis and 5-axis machining
• Lean manufacturing or continuous improvement experience
• Leadership or team lead experience
• Familiarity with ERP/MRP systems

CNC lV/Programmer ($36-$45 p/h)

This is a senior-level technical expert responsible for full-cycle CNC programming, setup, and operation of complex precision components. This role leads advanced machining strategies, develops efficient programs using CAM software, and drives continuous improvement across machining processes. This position supports engineering and manufacturing by assisting with troubleshooting, process development, and manufacturability improvements, while mentoring machinists and supporting production excellence.

Expectations

• Develop, write, and optimize CNC programs using CAM software (e.g., Mastercam, Fusion 360)
• Set up and operate CNC mills and/or lathes for highly complex, tight-tolerance parts
• Interpret advanced engineering drawings, CAD models, and GD&T requirements
• Design and recommend tooling, fixtures, and workholding solutions
• Lead new part introduction (NPI) from print to production
• Perform program prove-outs, first article runs, and process validation
• Troubleshoot and resolve complex machining, tooling, and programming issues
• Optimize cycle times, tool life, and overall machining efficiency
• Collaborate closely with engineering to improve part manufacturability (DFM feedback)
• Mentor and train CNC Machinist I–III team members
• Establish and document standardized work instructions and setup sheets
• Support continuous improvement initiatives (Lean, 5S, Kaizen)
• Ensure compliance with quality standards and safety procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training strongly preferred)
• 8–12+ years of CNC machining experience, including advanced programming
• Expert-level proficiency with CNC mills (multi-axis required)
• Advanced CAM programming experience (Mastercam, Fusion 360, or similar)
• Strong G-code knowledge and ability to edit programs at the machine
• Deep understanding of GD&T and blueprint interpretation
• Experience with complex materials (stainless steel, tool steels, aluminum, etc.)
• Proficiency with precision inspection tools; CMM experience preferred
• Proven ability to troubleshoot and optimize machining processes
• Ability to work independently and lead technical projects

Preferred Qualifications:

• 4-axis and 5-axis machining expertise
• Fixture design experience
• Lean manufacturing or Six Sigma exposure
• Experience with ERP/MRP systems

Both Positions:

Physical Requirements:

• Standing/Walking: Must be able to stand and walk for extended periods.
• Lifting/Carrying: Must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds.
• Manual Dexterity: Requires the use of hands and fingers to handle, feel, reach, and operate tools, measuring instruments, and computer controls.
• Vision Requirements: Must have close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus to inspect parts and read precision measuring instruments.
• Hearing and Communication: Must be able to hear machine sounds, alarms, and verbal instructions in a noisy environment.
• Postural Requirements: Must be able to bend, stoop, kneel, crouch, and occasionally climb or balance while loading materials or accessing machinery.
• Work Environment: Exposure to moving mechanical parts, metal shavings, noise, coolant, and shop odors. Personal protective equipment (PPE) such as safety glasses, hearing protection, and safety shoes are required.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

We are the world's #1 gummi candy manufacturer. It's a great time to join our growing organization and help spread "Childlike Happiness" (one of our core values) to consumers across the United States. The Maintenance Mechanic - Packaging will be responsible of performing maintenance, troubleshooting, and repairs on packaging equipment and related infrastructure.Reporting to Manager of Packaging & Technology, the Maintenance Mechanic - Packaging is responsible for assembling, installing, testing, and maintaining packaging equipment, apparatus, and fixtures using hand and power tools. They will collaborate with Electrical and Automation Technicians, as well as other employees, to maintain equipment and optimize processes. Additionally, they will perform preventive and corrective maintenance while driving equipment improvements. The Maintenance Mechanic - Packaging will also partner with support functions to identify and resolve unplanned downtime events, as well as address quality, safety, cost, and other losses in the area using problem-solving techniques and a continuous improvement mindset.

Responsibilities:

• Monitors packaging equipment for proper operation, makes adjustments and repairs to optimize machine performance.
• Inspects equipment and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
• Observes and diagnoses malfunctioning machines, systems, apparatus, and components, using test equipment and hand tools to locate the cause of a breakdown or operational problem.
• Clean, lubricate, adjust, and repair machinery and equipment.
• Disassembles machinery to inspect defects and replace compromised components. Reassemble machinery according to manufacturer's procedures.
• Ability to repair and fabricate components using shop machine tools and applicable welding techniques.
• Conducts inspection of and routine preventative maintenance on assigned equipment.
• Other duties is assigned.

Qualifications:

• Requires high school diploma or equivalent (HSED/GED). An AAS degree in robotics, industrial maintenance or technology is a plus.
• Minimum of three (3) years of experience relating to industrial mechanical repairs.
• Minimum one (1) year of trades training in industrial maintenance or other technical discipline.
• Must be flexible with off-shift work schedule and overtime/weekends as needed.

Preferred Qualifications:

• Requires good knowledge of the process equipment and strong mechanical aptitude.
• Requires teamwork ability; works well with others and communicates effectively with all associates.
• Requires the ability to train and coach others for success.

Skills:

• Ability to read and understand blueprints, schematic and mechanical drawings.
• Ability to operate a variety of hand and power tools, such as grinders, saws, machine tools, and welding equipment.
• Strong written and verbal communication skills in English to document work, communicate with management, and collaborate with colleagues.
• Requires basic mathematical skills to be able to add, subtract, multiply, divide, and work with percentages.

Physical Requirements:

• Standing/walking: Continuous (over 75%)
• Talking/hearing: Continuous (over 75%)
• Hand/finger dexterity: Frequent to continuous
• Climbing, bending, kneeling, crouching: Frequent
• Lifting/carrying tools, parts, and equipment 50 lbs: Frequent to continuous
• Ability to multitask and function in high-stress environments
• Work performed indoors with artificial lighting, mid-level noise, and proper ventilation

HARIBO of America, Inc. is an Equal Employment Opportunity Employer and maintains a Drug-Free Workplace. Employment at HARIBO of America, Inc. is subject to post offer, pre-employment drug testing. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, including protected veteran status, genetic information or any other basis protected by applicable federal, state, or local laws. HARIBO also prohibits harassment of applicants or employees based on any of these protected categories. It is also HARIBO's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

HARIBO is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation to assist with completing the electronic application, please contact the location for which you are applying and ask to speak with the human resources representative or email .

OUR COMPANY:

DISPLAYIT Inc. stands as an acclaimed designer and manufacturer, specializing in the creation of structured experiential environments. Established in 1998 in Irvine, California, currently expanding operation in Texas. DISPLAYIT is dedicated to designing, constructing, and installing innovative structural branded solutions that convey a cohesive brand message for our valued customers.

At the heart of our success is a team of highly talented individuals who collaborate creatively at the highest level, aiming to deliver the finest custom experiences. Our commitment is underscored by our relentless pursuit of creative solutions to exceed customer expectations. We exist not only to meet but to surpass the needs of our customers, and our unwavering focus is on operational efficiency.

Join us in our journey at our state-of-the-art facilities located in the vibrant city of Irvine, where innovation and excellence converge.

SUMMARY:

The additional Technical Draftsperson will play a key role in our engineering department, collaborating closely with the design, fabrication, and project management teams to translate conceptual design into well-coordinated, technically accurate construction documents. This role requires a firm grasp of fabrication methods, architectural detailing, industry standards, and a proactive approach to problem-solving. The selected candidate will contribute to projects across the entire design-to-fabrication spectrum, ensuring precision, efficiency, and adherence to project timelines. Under the direction of the Project Manager and Director of Design/Technology, the 3D Technical Designer/Drafter produces shop drawings for multiple elements or entire projects. The ideal candidate must possess excellent technical design skills and some leadership skills to develop and implement solutions and communicate them to stakeholders effectively.

DUTIES AND RESPONSIBILITIES:

• Develop detailed shop drawing packages and architectural drawings, including plans, elevations, sections, and details, to provide clients, project managers, and fabrication leads with an accurate representation of the design intent, scope of work, materials, and fabrication/assembly methods.
• Collaborate with the design team to ensure seamless integration of aesthetic and functional aspects into technical drawings. Proactively identify potential design and fabrication issues and propose solutions.
• Meet deadlines and achieve high-quality, on-budget outcomes by establishing and maintaining effective communication among the project team, fabricators, clients, vendors, contractors, and consultants.
• Conduct thorough reviews of technical documents to ensure accuracy, completeness, and compliance with industry standards and regulations.
• Implement best practices and standards to accelerate project timelines while maintaining quality.
• Ensure the design complies with company standards, client requirements, and other specifications (ADA, Building Codes, etc.)
• Prepare facility impact documentation to share with the architect, client, and general contractors, detailing the necessary infrastructure to integrate and install the exhibit.
• Identify opportunities for process optimization and efficiency improvements within the design and engineering workflow. Utilize relevant software tools and platforms to enhance the efficiency and accuracy of fabrication drawings.

QUALIFICATIONS:

• Associate or Bachelor’s Degree in Engineering, Architecture Industrial Design, Interior Design, or other related Design/Engineering specialization preferred.
• Minimum of 5-10 years of post-college experience as a drafter/detailer for one or more of the following fields: Cabinetry/Millwork, Furniture, Retail, Hospitality, Commercial Architecture, Museum, Trade Show Exhibits, Theater, and Amusement Park projects.
• Proficiency in 2D/3D Design in Rhino or a willingness to learn it within a few months of starting.
• Exceptional proficiency in at least one of the following programs: Rhino, AutoCAD, Fusion, Inventor, SolidWorks, SketchUp, Vectorworks, ArchiCAD, and Revit.
• Strong knowledge of materials/finishes, fabrication tools, and techniques to develop highly detailed 3D models, fabrication drawings, and assembly instructions supporting the design/manufacturing process.
• Strong analytical and problem-solving skills
• General knowledge of building design and documentation
• Fabrication experience is a plus.
• Ability to effectively communicate verbally and in writing, as well as interpret verbal and written instructions.
• Ability to manage multiple projects and drawings simultaneously with attention to detail.
• Ability to prioritize and meet deadlines with limited supervision.
• Experience designing or programming for CNC and Laser Cutting Machines preferred.
• Working knowledge of Microsoft Office Suite, PDF editors, and other support software.
• Bilingual in Spanish/English is a plus.

COMPETENCIES

• Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
• Written Communication--Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information.
• Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
• Adaptability--Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

• Frequently required to stand
• Frequently required to walk
• Frequently required to sit
• Frequently required to utilize hand and finger dexterity
• Frequently required to talk or hear
• Occasionally required to lift/push/carry items that may exceed 35 pounds

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• Monday to Friday

Work setting:

• In-person
• Office

Duration: Permanent/Full-time

Client: One of the largest Diesel Engines and Power Generators manufacturers in the US

Overview:

We are looking for an Industrial Electrician III who troubleshoots, assembles, installs, tests and maintains electrical systems using all necessary tools to keep equipment available and capable. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others.

Duties:

• Preventive Maintenance: Providing feedback into the Preventive Maintenance system and supporting equipment uptime and downtime failure analysis will help maintain operational efficiency.
• Troubleshooting and Repairs: Your proficiency in troubleshooting, electrical repairs, and maintenance will ensure that equipment operates smoothly and meets applicable codes and standards.
• Team Support and Training: By instructing and coaching others, you'll foster a collaborative and knowledgeable team environment.
• Continuous Improvement: Actively participating in continuous improvement activities and TPM teams will drive enhancements in quality, safety, processes, material flow, and employee development.

Qualifications:

• At least 7 years of experience in a relevant trade field, or A Journeyman Trade Certificate with relevant experience, or A 2-year technical degree in a related field, plus 3 years’ experience working in the Machine Repair/Industrial Electrical field.
• Knowledge and understanding of the NEC and IEC (National Electrical Code and Industrial Electrical Code) is required along with training, authorization, and certification in 70E.
• Knowledge and troubleshooting skills of PLC, HMI, Servo Drives, CNC, automation, and Robotic controls is required.