Assembly Line Patterns Australia Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Our client is a globally recognized European leader in bioprocess technologies, specializing in precision-engineered analytical lab equipment and control systems for the life sciences sector. With operations spanning approximately 80 countries and a long-standing heritage, they serve leading research institutions, pharmaceutical companies, and industrial biotech firms worldwide.

Our client is seeking a Director of Operations to lead the day-to-day operational performance of their U.S. assembly site with full accountability for safety, quality, delivery, cost, and people performance. The successful candidate will translate global operational strategies into effective local execution, build scalable manufacturing infrastructure, and establish processes that support aggressive growth targets in the North American market while maintaining the precision and compliance standards synonymous with the company's Swiss engineering heritage.

The ideal candidate is an accomplished operational leader with deep expertise in precision manufacturing or engineered products, proven success managing site-level operations with P&L accountability, and the ability to excel in a matrix organization with international reporting structures. This role offers a unique opportunity to shape operational capabilities for a growing North American operation while leveraging the resources, expertise, and reputation of an established global organization.

Key Responsibilities:

• Direct all production activities, material flow, production planning, purchasing, logistics, and supply chain operations to ensure efficient and compliant delivery of biotechnology instrumentation
• Execute corporate operations strategies, standards, and KPIs at the site level; establish performance targets and implement monitoring systems to drive on-time delivery, customer satisfaction, and optimal resource utilization
• Manage site-level budget, cost control, and operational results; identify and implement cost-reduction strategies and margin improvement opportunities without compromising quality
• Oversee purchasing, procurement, vendor management, inventory control, and warehousing operations to ensure material availability, favorable commercial terms, and supply chain efficiency
• Develop, maintain, and continuously improve manufacturing documentation, SOPs, and process controls in alignment with quality systems and regulatory requirements (ISO, OSHA)
• Serve as primary North American operational liaison with Swiss headquarters on manufacturing standards, quality requirements, technology transfer initiatives, and process improvements
• Lead capacity planning, facility infrastructure projects, and continuous improvement programs to support business scaling and operational excellence

Key Qualifications:

• Bachelor's degree in Engineering, Operations Management, Industrial Engineering, or related field required; Master's degree or MBA preferred
• Minimum 8–10 years of progressive leadership experience in operations, assembly, or plant management, preferably in industrial, engineered products, or precision instrumentation environments
• Proven track record managing site-level operations with full accountability for safety, quality, delivery, cost, and people performance
• Strong knowledge of OSHA regulations, EHS requirements, and U.S. labor law in manufacturing settings
• Hands-on experience with Lean Manufacturing, Operational Excellence, continuous improvement methodologies, and data-driven decision-making
• Proficiency with SAP or similar ERP systems strongly preferred; solid understanding of supply chain management, vendor management, and warehousing in precision manufacturing environments
• Experience working in matrix organizations with international reporting lines; familiarity with European mid-sized company culture highly beneficial.

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

• Works assembling connectors per Blue prints and verifying process
• Setup and run wire marking machines per blue prints and verify quality
• Positions parts to be assembled by following blue prints and Standard Work Instructions.
• Works at station as member of assembly group assembling one or more specific parts to meet production requirements.
• Positions parts in specific opening and screws or bolts them in place.
• Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions to assemble final unit.
• Verifies correct assembly of final unit.
• Ability to test unit with related test fixture.
  

• Other duties as assigned
• Supports any other areas as/if required
  

• Previous experience in a manufacturing / Assembly role
• Soldering/Welding
• High School diploma or GED
• Must be able to read blue prints and/or schematic reading
• Finger dexterity
• Hand-eye coordination
• Ability to verify function of unit per final blueprint
• Effective communication skills in English with the ability to read, speak, and understand English.
  

• 
  
• Assemble, bond, and finish composite parts and subassemblies
  
• Perform secondary bonding, hardware installation, drilling, trimming, and sanding
  
• Prepare bonding surfaces and mix/apply structural adhesives per specifications
  
• Align, fit, and inspect parts to meet dimensional and tolerance requirements
  
• Follow assembly drawings, travelers, and work instructions
  
• Complete required manufacturing and quality documentation
  
• Support rework, repair, and continuous improvement activities
  
• Adhere to safety, environmental, and quality system requirements
  

• 
  
• Provide daily direction and task assignments to composite assembly personnel
  
• Serve as the primary technical resource for troubleshooting bonding and assembly issues
  
• Train and mentor technicians on proper techniques, safety practices, and quality standards
  
• Monitor workflow to ensure schedule adherence and efficiency
  
• Coordinate with production supervisors, engineering, and quality to resolve issues
  
• Promote a safe, organized, and compliant work environment
  
• Provide input on performance feedback and serve as acting supervisor when required
  

• 
  
• Ability to read and interpret engineering and assembly drawings
  
• Familiarity with hand tools, measuring equipment, and bonding tools
  
• Understanding of adhesive bonding and surface preparation techniques preferred
  
• Strong mechanical aptitude and attention to detail
  
• Ability to work safely with chemicals and adhesives
  
• Effective communication and leadership skills
  
• Strong organizational and problem-solving abilities
  

• 
  
• High school diploma or equivalent required
  
• Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred
  
• On-the-job training may be provided for entry-level candidates
  

Role: Assembly Integration and Test Engineer

Pay: $90,000.00 - $110,000.00 per year

Job description:

Location: Boulder, Colorado

Employment Type: Full-time

Salary Range: From $90,000 to $110,000 depending on experience

About ThinkOrbital:

ThinkOrbital is developing breakthrough technologies to defend, service, and build in space. From pioneering autonomous welding in orbit to long-range X-ray imaging systems for space domain awareness and infrastructure inspection, we are redefining what’s possible in the final frontier. Our team is made up of driven engineers, scientists, and operators who thrive in a fast-paced, mission-focused environment.

Position Summary:

We’re looking for an Assembly Integration and Test Engineer to join our team, support all assembly integration and test activities across all our programs and products. This is a hands-on role that will involve close collaboration with a cross-disciplinary team etc.

Key Responsibilities:

· Perform hands-on assembly, integration, and testing of aerospace components, subsystems, and full systems

· Develop and execute test procedures, plans, and documentation to ensure compliance with technical and quality standards.

· Collaborate with cross-functional teams including design, systems engineering, and quality to resolve integration or test anomalies.

· Support environmental testing (vibration, thermal vacuum, EMI/EMC, etc.) and data analysis to validate system performance.

· Ensure accurate configuration control and documentation of hardware and test setups throughout the program lifecycle.

· Assist in troubleshooting issues and implementing corrective actions during assembly or testing phases.

· Interface with suppliers or test facilities as needed to support test activities or deliverables.

· Adhere to safety protocols and industry standards in a cleanroom, high-reliability environment, and radiation environment (X-Ray)

Mandatory Qualifications:

· Bachelor’s degree in Aerospace, Mechanical, Electrical Engineering, or a related field.

· Minimum of 3 years of experience in aerospace assembly, integration, or test.

· Strong understanding of aerospace hardware handling, contamination control, and verification processes.

· Excellent communication and documentation skills.

· Ability to work hands-on in a fast-paced, team-oriented environment.

· Self-starter with a strong sense of ownership; able to take initiative, work independently, and tackle unfamiliar or ambiguous technical challenges with minimal guidance

Certifications/Trainings:

· IPC J STD 001G, Requirements for Soldered Electrical and Electronic Assemblies

· IPC A 600, Acceptability of Printed Boards

· NASA STD 8739.1, Workmanship Standard for Polymeric Application of Electrical Assemblies

· NASA STD 8739.4, Workmanship Standard for Crimping, Interconnecting Cables, Harnesses, and Wiring

· ANSI/ESD S20.20, Electrostatic Discharge (ESD) Control

· Radiation Safety Training (X-Ray Cabinets)

What We Offer:

Competitive benefits and stock options

Health, Vision and Dental Insurance

Opportunity to shape next-generation space systems

A small, fast-moving team where your impact is tangible

Flexible Schedule

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now