Assembly Language Example Jobs in Usa

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

• Deburr and assemble machined components for shipment according to company procedures.
• Operate hand tools, shop equipment, and machinery safely and efficiently.
• Move finished products between workstations, QC, and shipping areas as needed.
• Perform visual inspections to verify product quality and conformance to standards.
• Follow written and verbal instructions to complete assigned projects accurately and on time.
• Record work times, quantities, and materials used for each job.
• Maintain a clean, organized, and safe work area-returning tools and materials to designated areas daily.
• Follow all company policies and safety regulations, including proper use of personal protective equipment.
• Report equipment issues, product discrepancies, or injuries promptly to management.
• Support other departments when needed and perform other related duties as assigned.
  

• High school diploma or equivalent.
• Strong communication skills and a positive, service-oriented attitude.
• Ability to follow instructions precisely and pay close attention to detail.
• Proficient computer skills and the ability to learn new software.
• Epicor ERP experience (preferred).
• Previous customer service or manufacturing experience is a plus.
• Ability to stand for extended periods and lift up to 25 lbs.
  

• Comprehensive Training & Career Growth Opportunities
• 100% Company-Paid Medical and Dental Coverage
• Company-Paid Life and Disability Insurance
• 401(k) with up to 4% Matching
• Generous Paid Time Off & Paid Holidays
• Fun, Team-Oriented Work Environment
• Exciting Employee Events and Bonding Activities
  

Martinrea is a diversified global automotive supplier engaged in the design, development and manufacturing of metal parts, assemblies and modules, complex fluid management systems and aluminum products. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain, and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products.

Mission is to make people's lives better by:

Delivering outstanding quality products and services to our customers.

Providing meaningful opportunity, job satisfaction, and job security for our people.

Being positive contributors to our communities; and,

Providing superior long-term investment returns to our stakeholders.

Our strength is our people.

We invite you to explore a challenging and rewarding career at Martinrea in Tupelo, MS.

Benefits

Competitive Salary

Major Health Insurance Carrier

Dental Health Insurance

Vision Insurance

401K - match 50%

Short- and Long-term Disability

Required Qualifications:

• College diploma and/or combination of Grade 12 with minimum 3 years of hands-on
• Supervisory experience in a related field
• Good working knowledge of assembly, stamping and welding operations
• Excellent English Communication Skills (oral and written)
• Basic knowledge of computer skills
• Excellent organizational and time management skills
• Strong leadership and problem-solving skills
• Familiar with the Occupational Health and Safety Act and Regulations

Critical Success Factors:

• Excellent attendance
• Ability to work efficiently with minimum supervision and/or directions
• Ability to work in a team environment and be a team player and a team leader
• Strong leadership and interpersonal skills
• Excellent motivator and mentor
• Ability to maintain all production related records in an organized and tidy manner, use sound judgment in dispersing
• confidential information related to employee’s data
• Support and contribute to the Quality Systems and Environmental Management Systems Requirements
• Ensure that all duties and tasks are carried out in a safe and efficient manner and at no time is the employee or their
• co-workers placed in an unsafe condition

Responsibilities:

• Supervise the shift Team Leaders, Assembly Operators, Welders and the Forklift Operators
• for the department
• Ensure that product identification, traceability, process control, packaging instructions are being followed at all
• times
• Ensure all assembly personnel are following the Quality System and conform to quality standards
• Ensure all first off/last off procedures are being followed at all times
• Ensure LPA is performed as per schedule, follow up to close all outstanding issues within a reasonable time frame
• Responsible to train all personnel within the assembly department to meet company's target on productivity and efficiency and manage within the scheduled financial budget
• Oversee and maintain inventory levels of parts produced to meet scheduled targets
• Coordinate with other departments to ensure no unnecessary interruption of production requirements
• To train, develop, mentor, direct and discipline subordinates to ensure a productive, efficient and competent
• workforce to meet scheduled requirements in a safe environment
• Provide regular constructive feedback and communication to subordinates formally and informally on company policies, work procedures and work standards etc. and to ensure adherence to all policies and
• procedures at all times
• To make recommendation to Assembly Manager on the confirmation and/or disposition of employees within the probationary period
• Responsible for ensuring all training within the department is completed in a timely manner, documented and posted at each workstation. Provide on-the-job retraining as required.
• Assist in providing management reports and documentation of key measurable as required
• Maintain a system of communicating ongoing departmental performance to subordinates on a regular basis
• Ensure good housekeeping for the department and that all areas responsible are tidy and organized at all times
• Ensure subordinates follow Company policies on Health, Safety & Environment and PPE requirements
• Contribute to the continuous improvement initiatives on all aspects of the job and to encourage all subordinates to do
• the same

Martinrea International Inc. is proud to provide employment accommodation during the recruitment process. Should you require any accommodations, please notify us if you are contacted for a job interview.

Do you enjoy hands-on work and take pride in building something that truly matters? Are you motivated by staying on schedule, solving problems quickly, and seeing the direct results of your work? If you’re looking for a fast-paced manufacturing role where you’ll assemble Extol’s proprietary, high-impact product line and work closely with a supportive, close-knit team — this could be the right fit for you.

Extol, Inc. is looking for a driven and detail-oriented Manufacturing & Assembly Technician! This position is responsible for performing component manufacturing and equipment assembly to support Extol’s proprietary staking product line. Strong candidates will demonstrate mechanical aptitude, the ability to follow build schedules and instructions accurately, and proactive communication to keep production running smoothly.

The Ideal Candidate

• Provides component manufacturing and equipment assembly, including assembly, wiring, program downloads, and testing to meet specifications.
• Maintains alignment with the build schedule to ensure products are completed and shipped on time.
• Ensures parts meet requirements through visual inspection and use of measuring devices.
• Works collaboratively with purchasing, sales, and internal team members to resolve issues and maintain workflow.
• Develops process awareness by identifying waste and suggesting continuous improvement opportunities.
• Demonstrates ownership of the manufacturing cell by maintaining organization, equipment upkeep, and clear communication when issues arise.

What You’ll Bring

• High school diploma or equivalent with strong mechanical aptitude.
• Experience using hand and power tools safely and effectively.
• Ability to read and interpret work instructions and use routine measuring devices such as calipers and micrometers.
• Basic computer skills including email and spreadsheet use.
• Strong organizational skills, attention to detail, and the ability to work both independently and within a team.

What We Offer:

• Paid Community Impact –Employer paid time off to volunteer and positively impact community (Significant Impact).
• Employee Stock Ownership Plan (ESOP) - employees gain ownership interest in the company.
• Profit Sharing - a portion of the company profits are distributed to employees each quarter the target profit level is reached.
• 100% Employer Paid Dental, Vision, Group Life Insurances, Short-term and Long-term Disability, and Employee Assistance Program
• Annual Employer H.S.A. Contributions and 3 Medical Insurance Plan Options (one of which is 100% employer paid!)
• Generous Paid Time Off - Vacation, sick time off, and nine paid holidays.
• In Addition - Voluntary Life Insurance Options, Pet Discount Program, Accident & Critical Illness plans, 401k, and Educational Reimbursement Program.

About Extol, Inc.:

Extol is an innovative manufacturing technology company striving to improve plastic products through engineering, plastic assembly technology, custom automation, and 3D printing.

We strive to build a customer-centric, values-driven organization that grows profitably by solving customers' challenges with a delightful experience.

If you have passion to work collaboratively and be part of a team that wants to win together, apply today! To learn more about Extol, please visit us at | Empathy | Humility | Trust | Winning Together

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Electrical Technician - Harness Assembly

Albuquerque, New Mexico

We are seeking an experienced Electrical Technician with a strong background in harness assembly to support the production and integration of electrical systems for our Aerospace client This role is hands-on and requires a deep understanding of electrical wiring, cable harness fabrication, and aerospace-grade standards.

Job Purpose:

• Harness Fabrication & Assembly – Build, route, and install electrical harnesses, ensuring proper terminations, crimping, and soldering according to aerospace standards.
• Wiring & Integration – Assist in the assembly and installation of electrical components, including connectors, circuit boards, and avionics systems.
• Blueprint & Schematic Interpretation – Read and interpret electrical schematics, wiring diagrams, and engineering drawings to ensure accurate builds.
• Testing & Troubleshooting – Perform continuity tests, insulation resistance checks, and troubleshooting to verify harness integrity.
• Quality Control & Compliance – Ensure all work meets industry and company quality standards, adhering to safety and aerospace regulations.
• Collaboration – Work closely with engineers and other technicians to support system integration and problem-solving efforts.

Experience Required:

• 3+ years of experience in electrical harness assembly, wiring, or related field
• Proficiency in crimping, soldering, and connector assembly
• Ability to read and work from engineering drawings, schematics, and wiring diagrams
• Strong understanding of cable routing, strain relief, and aerospace/automotive wiring standards
• Hands-on experience using tools such as wire strippers, heat shrink tubing, and torque wrenches
• Excellent attention to detail and ability to work in a fast-paced environment

Desirable Experience:

• Experience working in aerospace, aviation, or high-tech manufacturing
• IPC/WHMA-A-620 certification or similar (preferred but not required)
• Familiarity with electrical testing equipment (multimeters, continuity testers, etc.)
• Ability to adapt and troubleshoot in a dynamic R&D environment

If you are interested then please apply today.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Status:

Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology.

Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. 

Our Troy, OH site location has an immediate need for a Brake Assembly Operator responsible for assembly of brakes and component parts of brakes while operating nut runners, drill presses, power screw drivers, grinders, electric hand drills, burr guns, riveters and other tools as necessary and testing of assembled brakes.

2nd Shift: Monday - Friday 3PM - 11PM

What You Will Do

• Receive job assignments, piece quantity, and special instructions from the supervisor.

• Read standard operating procedures and operating sheets.

• Clean, wipe, and sand parts as necessary.

• Set torque wrenches and assemble brakes and their components.

• Test brakes, rework brakes with leaks, and replace lee plugs as needed.

• Stamp information on tags or pads and notify the supervisor of stock needs or machine problems.

• Record transactions and quality data; report machine or process issues to the supervisor.

• Check parts against the pick list and set up riveters as required.

• Torque all applications as required.

• Retrieve parts from the warehouse and store/retrieve brake components, maintaining current inventory records.

• Prepare brakes and brake components for shipment, including packaging, counting, weighing, labeling, and completing paperwork.

• Move materials between workstations and cells using hand trucks, hoists, or robot assistance.

• Set aside discrepant parts.

• Clean and maintain work areas, machines, auxiliary equipment, and common areas to ensure a clean, safe, and orderly environment.

• Check and maintain operating levels of fluids and required machine materials.

• Mask and plug parts as needed and touch up paint as required.

• Attend training classes and cell meetings, and perform miscellaneous operations as assigned in support of Brake Assembly.

• You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test.

• You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment.

• You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted.

• You will be required to wear personal protective equipment as required. 

•  You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures.

Qualifications You Must Have

• Typically Requires a HS Diploma or a GED

• Minimum of 1 year CNC machining experience or minimum of 2 years manufacturing experience.

• Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.)

What We Offer

Some of our competitive benefits package includes:   

• Medical, dental, and vision insurance  

• Paid time off after 121 days

• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option  

• Tuition reimbursement program 

• Student Loan Repayment Program  

• Life insurance and disability coverage  

• Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection 

• Birth, adoption, leave benefits 

• Ovia Health, fertility, and family planning  

• Adoption Assistance           

• Autism Benefit  

• Employee Assistance Plan, including up to 10 free counseling sessions  

• Healthy You Incentives, wellness rewards program 

• Doctor on Demand, virtual doctor visits  

• Bright Horizons, child and elder care services 

• Teladoc Medical Experts, second opinion program  

•  And more!  

Learn More & Apply Now!​

Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!  

*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40. (Confirm Safety Sensitive Role) 

At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.  

Apply now and be part of the team that’s redefining aerospace, every day.

Employee Referral Eligible 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

• 
  
• Performs duties by verbal or written instructions.
  
• Crimps, screws, welds, solders, cements, press fits, or performs similar operations to fasten parts together.
  
• Assembles or attaches various hardware such as caps, clamps, tape, lugs, connectors, etc. to assemblies.
  
• Tends to machines that shape, press, insert, wind, or weld component parts.
  
• Sorts, packs, and records production information.
  
• Maintains acceptable levels of production according to established standards.
  
• Assists other associates when needed.
  
• Maintains dialog with lead personnel on status of work and raw material to ensure efficiency.
  
• Practices good safety and housekeeping procedures and adheres to all established policies and procedures.
  

• 
  
• Good communication skills and ability to understand verbal and written instructions.
  
• Ability to stand, walk, kneel, and work over equipment for long periods of time.
  
• Ability to work with and handle very small parts (.003 diameter).
  
• Ability to work with hand tools and possibly run a semi-automated machine.
  
• Ability to learn and understand dimensions on drawings.
  
• Ability to lift up to 20 lbs.
  
• Ability to determine / recognize color coding.
  
• Basic math and measuring skills.
  
• Must be a good team player and have the ability to work with people of diverse backgrounds.
  

• HS Diploma (or equivalent) preferred.

Machine Builder – 3 Openings (2 Integration, 1 Sub‑Assembly)

Location: Clinton Township, MI

Schedule: Full-time, Onsite

Type: Long-Term Contract

Requirements: Must pass drug screen and background check

About the Role

We are seeking skilled Mechanical Machine Builders—2 Integration Builders and 1 Sub‑Assembly Builder—to join our team supporting automotive equipment build and installation projects. This role requires the ability to work independently with minimal supervision while delivering high‑quality workmanship.

Key Responsibilities

• Perform mechanical integration and sub‑assembly work for automotive OEM projects (Chrysler, Ford, GM).
• Work independently on medium-complexity mechanical build projects.
• Follow equipment installation through all phases, from in-house build to customer-site installation.
• Assist the project team in resolving technical issues or build concerns.
• Read and interpret blueprints, mechanical drawings, and BOMs.
• Update and submit weekly E‑BOM summaries to the Mechanical Supervisor.
• Verify all parts and assemblies conform to specifications and engineering documentation.
• Maintain project schedules, track open issues, and meet deadlines.
• Follow all safety, environmental, and quality system procedures.
• Maintain a clean, organized work area.
• Utilize rigging and crane equipment safely and effectively.
• Perform basic welding as required.
• Provide and maintain own tools and PPE.

Qualifications

• Education: One-year certificate from a college or technical school; or
• 5 years of related mechanical assembly experience; or
• Equivalent combination of education and experience.
• Strong understanding of automotive industry build practices.
• Proficient with standard mechanical tools, rigging, and overhead cranes.
• Ability to work with minimal supervision while maintaining high-quality output.
• Reliable, consistent, and punctual attendance is essential.

Additional Details

• This role requires 100% onsite work.
• Long-term contract opportunity with full-time hours.
• Candidates must successfully pass drug screening and background checks.