Assembly Label Pants Jobs in Usa

• Works assembling connectors per Blue prints and verifying process
• Setup and run wire marking machines per blue prints and verify quality
• Positions parts to be assembled by following blue prints and Standard Work Instructions.
• Works at station as member of assembly group assembling one or more specific parts to meet production requirements.
• Positions parts in specific opening and screws or bolts them in place.
• Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions to assemble final unit.
• Verifies correct assembly of final unit.
• Ability to test unit with related test fixture.
  

• Other duties as assigned
• Supports any other areas as/if required
  

• Previous experience in a manufacturing / Assembly role
• Soldering/Welding
• High School diploma or GED
• Must be able to read blue prints and/or schematic reading
• Finger dexterity
• Hand-eye coordination
• Ability to verify function of unit per final blueprint
• Effective communication skills in English with the ability to read, speak, and understand English.
  

• 
  
• Assemble, bond, and finish composite parts and subassemblies
  
• Perform secondary bonding, hardware installation, drilling, trimming, and sanding
  
• Prepare bonding surfaces and mix/apply structural adhesives per specifications
  
• Align, fit, and inspect parts to meet dimensional and tolerance requirements
  
• Follow assembly drawings, travelers, and work instructions
  
• Complete required manufacturing and quality documentation
  
• Support rework, repair, and continuous improvement activities
  
• Adhere to safety, environmental, and quality system requirements
  

• 
  
• Provide daily direction and task assignments to composite assembly personnel
  
• Serve as the primary technical resource for troubleshooting bonding and assembly issues
  
• Train and mentor technicians on proper techniques, safety practices, and quality standards
  
• Monitor workflow to ensure schedule adherence and efficiency
  
• Coordinate with production supervisors, engineering, and quality to resolve issues
  
• Promote a safe, organized, and compliant work environment
  
• Provide input on performance feedback and serve as acting supervisor when required
  

• 
  
• Ability to read and interpret engineering and assembly drawings
  
• Familiarity with hand tools, measuring equipment, and bonding tools
  
• Understanding of adhesive bonding and surface preparation techniques preferred
  
• Strong mechanical aptitude and attention to detail
  
• Ability to work safely with chemicals and adhesives
  
• Effective communication and leadership skills
  
• Strong organizational and problem-solving abilities
  

• 
  
• High school diploma or equivalent required
  
• Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred
  
• On-the-job training may be provided for entry-level candidates
  

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Job Title: Safety / Red Teaming Data Labeling Analyst III (DLA III)

Company: Meta AI (via Tundra Technical Solutions)

Location: Hybrid – 3 days onsite per week

Pay Rate: $30/hr USD

Experience Required: 4+ years

Contract: 3 months to start (Extension likely)

About the Role

Tundra Technical Solutions is hiring on behalf of Meta AI for a Safety / Red Teaming Data Labeling Analyst III (DLA III) to support AI model development and evaluation. This role is focused on improving model safety, quality, and reliability through data annotation, auditing, and adversarial testing.

You’ll work closely with cross-functional teams to evaluate model outputs, identify risks, and help strengthen safety systems through structured red-teaming efforts.

Key Responsibilities

• Execute high-quality data annotation and evaluation across multi-modal datasets
• Perform QA auditing, including sampling, inter-annotator alignment, and error analysis
• Design and run red-teaming / jailbreak prompts to test model safety across sensitive domains
• Analyze model outputs to identify policy violations, risks, and edge cases
• Apply knowledge of global political systems, events, and actors to inform content evaluation and policy enforcement
• Collaborate with stakeholders to improve labeling guidelines and model performance

Required Qualifications

• 4+ years of experience in data annotation, labeling, or evaluation
• Proven experience with QA auditing methodologies (sampling, alignment, error analysis)
• Hands-on experience with safety-focused red-teaming or adversarial testing
• Strong understanding of US and global political landscapes and current events
• Ability to apply policy frameworks to risk identification and content evaluation

Preferred Qualifications

• Experience working with LLMs (Large Language Models)
• Bachelor’s degree (preferred, not required)

Why Apply?

• Work at the forefront of AI safety and model evaluation
• Opportunity to contribute to large-scale AI systems at Meta AI
• Collaborative, fast-paced, and impactful environment

How to Apply

If you’re interested, please apply directly or share your resume and availability for a screening call at

• 
  
• Perform preventive maintenance inspection before the start of each shift as outlined on the Preventive Maintenance Check Sheet. Apply oil or grease to specified areas. Confirm the operability of all detectors.
  
• The ability to perform a more comprehensive PM on the machines including but not limited to oil changes.
  
• Basic troubleshooting of chain assembly equipment to understand the alarm messages, identify what this issue is and how to correct the issue.
  
• The assembly line consists of the following machines/operations: roller link assembly, chain assembly, riveting, pre-stressing, articulation checking, center distance measuring, automatic cutting, and endless operation, washing, final inspection, and packing.
  
• Adhere to work standards. Responsible for maintaining production schedules, quality control records, chain assembly records, shipping charge numbers, and the traceability records for each charge of chain and referring any unusual problems to the departmental supervisor.
  
• Prepare test samples for quality control per work standard. Record production and any other data required utilizing various forms as directed.
  
• Utilize a machine-monitoring system to record downtime.
  
• Detect faulty operation or defective material and report these and other unusual conditions to the group leader or supervisor.
  
• Maintain work area and equipment in a clean and orderly condition and follow standard safety regulations.
  
• Perform other similar and associated duties as required or directed.
  

• 
  
• High school diploma or equivalent preferred; equivalent relevant experience may be considered
  
• 2-5 Years of experience running multiple machines and performing preventative maintenance.
  
• Safety First mindset
  
• Strong focus on Quality
  
• Ability to work well in a team environment
  
• Ability to work in a fast-paced environment
  
• Must have good mechanical aptitude and problem-solving skills
  
• Ability to use material handling devices such as hand trucks, and hydraulic lift trucks.
  
• Basic Computer Skills.
  

• 
  
• A competitive compensation package, including medical and dental benefits, life insurance, and generous 401(k) match and profit sharing.
  
• Paid vacation time
  
• Step increases
  
• Shift differential pay
  
• Weekly pay
  

Role: Assembly Integration and Test Engineer

Pay: $90,000.00 - $110,000.00 per year

Job description:

Location: Boulder, Colorado

Employment Type: Full-time

Salary Range: From $90,000 to $110,000 depending on experience

About ThinkOrbital:

ThinkOrbital is developing breakthrough technologies to defend, service, and build in space. From pioneering autonomous welding in orbit to long-range X-ray imaging systems for space domain awareness and infrastructure inspection, we are redefining what’s possible in the final frontier. Our team is made up of driven engineers, scientists, and operators who thrive in a fast-paced, mission-focused environment.

Position Summary:

We’re looking for an Assembly Integration and Test Engineer to join our team, support all assembly integration and test activities across all our programs and products. This is a hands-on role that will involve close collaboration with a cross-disciplinary team etc.

Key Responsibilities:

· Perform hands-on assembly, integration, and testing of aerospace components, subsystems, and full systems

· Develop and execute test procedures, plans, and documentation to ensure compliance with technical and quality standards.

· Collaborate with cross-functional teams including design, systems engineering, and quality to resolve integration or test anomalies.

· Support environmental testing (vibration, thermal vacuum, EMI/EMC, etc.) and data analysis to validate system performance.

· Ensure accurate configuration control and documentation of hardware and test setups throughout the program lifecycle.

· Assist in troubleshooting issues and implementing corrective actions during assembly or testing phases.

· Interface with suppliers or test facilities as needed to support test activities or deliverables.

· Adhere to safety protocols and industry standards in a cleanroom, high-reliability environment, and radiation environment (X-Ray)

Mandatory Qualifications:

· Bachelor’s degree in Aerospace, Mechanical, Electrical Engineering, or a related field.

· Minimum of 3 years of experience in aerospace assembly, integration, or test.

· Strong understanding of aerospace hardware handling, contamination control, and verification processes.

· Excellent communication and documentation skills.

· Ability to work hands-on in a fast-paced, team-oriented environment.

· Self-starter with a strong sense of ownership; able to take initiative, work independently, and tackle unfamiliar or ambiguous technical challenges with minimal guidance

Certifications/Trainings:

· IPC J STD 001G, Requirements for Soldered Electrical and Electronic Assemblies

· IPC A 600, Acceptability of Printed Boards

· NASA STD 8739.1, Workmanship Standard for Polymeric Application of Electrical Assemblies

· NASA STD 8739.4, Workmanship Standard for Crimping, Interconnecting Cables, Harnesses, and Wiring

· ANSI/ESD S20.20, Electrostatic Discharge (ESD) Control

· Radiation Safety Training (X-Ray Cabinets)

What We Offer:

Competitive benefits and stock options

Health, Vision and Dental Insurance

Opportunity to shape next-generation space systems

A small, fast-moving team where your impact is tangible

Flexible Schedule

Company Description

Butcher Power Products (BPP) is a leading manufacturer of mission‑critical and industrial power solutions, known for redefining efficiency and quality in power systems. Based in Sacramento, CA, with a 100,000+ sq ft manufacturing facility, BPP brings over a century of electrical distribution expertise. Our in‑house engineering and production teams deliver UL‑certified switchboards, medium voltage switchgear, power distribution units, and more—built to exceed industry standards. Guided by a culture of integrity, accountability, and innovation, we focus on solving problems and delivering reliable, on‑time solutions. Trusted nationwide, BPP is a preferred partner for critical projects where uptime is essential.

Job Description

This position was created to establish dedicated quality inspection at our Fabrication facility for the first time, while also supporting Assembly as production needs shift. You’ll be hands‑on in the process, helping catch issues early, document nonconformances, and strengthen how quality shows up across both sites.

Why this role exists

As production volume increases, we want quality checks happening earlier and more consistently. This role helps contain defects before they reach Assembly, supports incoming material inspection, and provides flexible QC coverage where it’s needed most.

What success looks like in your first 6–12 months

Fabrication checkpoints are consistently completed on schedule, incoming material issues are identified and contained quickly, fewer defects escape to Assembly, inspection documentation is accurate and timely, production teams trust Quality as a partner in keeping work moving.

What you’ll be responsible for

In‑Process Inspection — Fabrication

• Perform in‑process inspections at defined checkpoints before product moves to Assembly, verify dimensions, workmanship, and visual requirements against drawings and work instructions, identify and segregate nonconforming product, apply hold tags and escalate issues, maintain inspection records, contribute feedback to improve fabrication checkpoints over time.
• Incoming Material Inspection
• Inspect incoming material per established procedures, verify material certifications and Certificates of Conformance, identify and segregate nonconforming material, document findings and escalate issues, support the transition of incoming inspection ownership to Quality.
• Assembly Support — Float
• Provide QC inspection support at Assembly as workload demands, perform defined quality checks, support final QC release activities, identify and document nonconforming product, apply hold tags and notify Quality leadership.
• Documentation & Reporting
• Complete inspection records, logs, and checklists accurately, escalate nonconformances with clear documentation, share observations on recurring defect patterns, support data collection for rework and quality cost tracking.

Must‑Have Qualifications

• High school diploma or equivalent
• 2+ years of quality inspection or quality control experience in a manufacturing environment
• Ability to read and interpret engineering drawings and specifications
• Experience using basic measurement tools such as calipers, micrometers, tape measures, and gauges
• Strong attention to detail and ability to identify workmanship defects
• Ability to clearly document inspection findings
• Comfort working on the shop floor and in fabrication environments
• Ability to work independently with minimal supervision

Nice‑to‑Have Qualifications

• Associate’s degree or technical certification in manufacturing or quality
• Experience with electrical equipment, switchgear, panels, or metal fabrication
• Familiarity with ISO 9001 Quality Management Systems
• Experience with incoming material inspection and supplier documentation
• ASQ Certified Quality Inspector (CQI) or Certified Quality Technician (CQT)
• Experience with ERP or MRP systems
• Forklift certification or willingness to obtain

Work environment

Primarily on the Fabrication and Assembly shop floor, physical work including standing, walking, bending, and occasional lifting up to 50 lbs, exposure to typical manufacturing conditions, travel between Fabrication and Assembly sites as scheduled, occasional overtime based on production needs.

Pay range: $28.00 – $38.00 per hour, depending on experience, plus benefits

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now