Assembly Label Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position Summary

The Brand Associate supports the development, execution, and day-to-day management of private label brands across the organization. This role partners closely with the Senior Brand Manager and cross-functional teams—including Creative, E‑Commerce, Procurement, Supply Chain, and external agencies—to ensure the successful planning, launch, and ongoing performance of branded initiatives. The ideal candidate is detail-oriented, proactive, and able to manage multiple projects in a fast-paced environment.

Key Responsibilities

Brand & Marketing Support

• Partner with the Senior Brand Manager to support brand strategy, annual marketing plans, and ongoing project management needs.
• Collaborate with Marketing and Creative teams to develop monthly campaigns including social media, digital, video, and email content for all private label brands.
• Work with MAD Agency and other creative partners on design, branding elements, and execution of new initiatives.

Product Launches & Merchandising

• Coordinate and manage new product launches, ensuring alignment across Creative, E-Commerce, Supply Chain, and other key departments to deliver a smooth and successful rollout.
• Manage monthly merchandising plans for private label items in partnership with the Merchandising/Procurement teams.
• Support vendor partnerships for collaborative initiatives (e.g., custom accessories or co-branded programs).

Operational & Cross-Functional Coordination

• Work closely with Supply Chain to ensure adequate inventory flow, particularly for special campaigns or high-impact promotional periods.
• Partner with the Procurement team to maintain accurate and active private label product codes, pricing, and item setup; ensure deactivated codes are cleaned up in a timely manner.
• Track brand and product performance through AS400, Power BI, and other reporting tools to identify growth opportunities and areas needing support.

Media & Influencer Management

• Serve as a point of contact for media partners and influencers engaged in private label promotions, supporting communication, scheduling, and campaign execution.

Qualifications

• Bachelor’s degree in Marketing, Business, Communications, or related field preferred.
• 1–3 years of experience in marketing, brand management, product coordination, or a similar role.
• Strong project management and organizational skills with the ability to manage multiple deadlines.
• Proficiency in AS400, Power BI, or similar analytics/reporting tools is a plus.
• Excellent communication and relationship-building skills across internal teams and external partners.
• Ability to think creatively while maintaining strong attention to detail.

Competencies

• Collaboration: Works effectively with cross-functional teams.
• Detail Orientation: Ensures accuracy in product codes, pricing, and campaign documentation.
• Agility: Thrives in a dynamic, fast-paced environment with shifting priorities.
• Analytical Thinking: Uses data to support brand performance decisions.

• 
  
• Assembles components, assemblies or sub-assemblies.
  
• Makes setups and adjustments holding tolerances to specifications.
  
• May perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards; or may perform mechanical assembly of panels, LRU's, batteries, and servo motors as it pertains to cable assembly.
  
• May disassemble, modify, rework, reassemble and test experimental/prototype assemblies or subassemblies according to specifications.
  
• Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
  
• Expected to work in a safe manner in accordance with established operating procedures and practices.
  
• Completes Disposition on Nonconforming product when needed.
  
• Participates in production Integrated Process Team (IPT)
  
• Communicates/works with engineering and other support departments.
  
• Participates/runs weekly cell team meeting.
  
• Mentors team members in assigned cell.
  
• Assist team/assemblers in building and solving technical issues of cable assembly.
  
• Additional Functions:
  • 
    
  • Performs 5S housekeeping and cleanup duties upon completion of assigned tasks
    
  • Supports Clean-as-you-go cleanup duties during the shift.
    
  • May train lower level assemblers or act as a lead and direct the work of others.
    
  • Other duties as assigned or required.
    
  
  
  

• 
  
• Typical requires a high school diploma or equivalent and seven or more years experience.
  
• Must be customer focused and possess:
  • 
    
  • The ability to read and interpret engineering drawing and wire lists.
    
  • Extensive knowledge in specialized functions.
    
  • A comprehensive understanding of the general and specific aspects and technical phase of the job and their practical to complex applications to intricate problems.
    
  • Good knowledge of computer operations and applications pertinent to the position.
    
  • Familiarity with use of soldering and compression connection tools.
    
  • Good visual perception and ability to distinguish between colors.
    
  
  
  
• The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.
  
• Ability to obtain and maintain DoD Security clearance is required.
  

Job title: Data Protection Specialist (Microsoft Purview)

Job location: Philadelphia, PA ( hybrid- 2 days onsite)

Job type: Full time

One of the largest healthcare is seeking a Data Protection Specialist (Microsoft Purview). The Data Protection Specialist will be responsible to design, implement, and manage the organization’s data governance, information protection, and compliance capabilities across Microsoft 365. This role will serve as a hands-on technical lead for the Microsoft Purview platform, responsible for protecting sensitive data, enabling regulatory compliance, and responding to data risks across the enterprise.

The ideal candidate has deep practical experience with Microsoft Purview (formerly Microsoft 365 Compliance) and is comfortable working cross‑functionally with Security, IT, Legal, Compliance, and business stakeholders. This role requires both strategic design and day‑to‑day operational execution.

Job Duties

Microsoft Purview Strategy & Implementation

• Design, implement, and manage Microsoft Purview capabilities, including:
• Microsoft Information Protection (MIP) – sensitivity labels, label policies, auto‑labeling, encryption, and rights management
• Data Loss Prevention (DLP) – policies for email, SharePoint, OneDrive, Teams, endpoints, and third‑party applications
• Data Lifecycle Management & Records Management – retention labels, retention policies, and defensible disposal
• Insider Risk Management – risk indicators, policies, alerts, and investigation workflows
• eDiscovery & Audit – content searches, legal holds, audit log investigations, and evidence collection
• Integrate Purview controls across Microsoft 365 workloads including Exchange Online, SharePoint Online, OneDrive, Teams, Defender, and hybrid environments where applicable
• Serve as the technical subject‑matter expert and platform owner for Microsoft Purview

Data Classification & Governance

• Develop and maintain an enterprise data classification framework aligned with business needs and regulatory requirements
• Partner with business units to identify and protect sensitive data such as PII, PHI, financial data, and intellectual property
• Implement scalable data discovery using built‑in classifiers, trainable classifiers, and auto‑classification policies
• Ensure data protection controls are effective while maintaining usability and business productivity
• Generative AI and Agentic AI Governance

Compliance, Risk & Incident Response

• Translate regulatory requirements (GDPR, HIPAA, HITRUST and industry‑specific regulations) into enforceable technical controls
• Monitor compliance posture using Microsoft Compliance Manager and recommend remediation actions
• Investigate and respond to DLP incidents, insider risk alerts, and policy violations
• Support internal and external audits by producing audit logs, reports, and compliance evidence
• Collaborate with Legal, Compliance, HR, and Security teams during investigations and regulatory inquiries

Automation & Operational Excellence

• Use PowerShell to automate Purview configuration, reporting, and operational tasks
• Continuously tune and improve policies to reduce false positives and improve signal quality
• Develop documentation, runbooks, and operational procedures to support ongoing governance and incident response

Minimum Qualifications

• 7-10 years preferred work experience.
• 5 years related work experience
• Hands‑on experience designing and managing Microsoft Purview in a production enterprise environment
• Experience implementing and managing:
• Sensitivity labels and encryption
• DLP policies across cloud, endpoint, and SaaS applications
• Retention and records management policies
• Insider Risk Management and alert investigations
• eDiscovery (Standard and/or Premium) and audit logging

Preferred Qualifications

• Proficiency with PowerShell for automation and reporting
• Experience in highly regulated industries (e.g., healthcare, financial services, government)
• Experience integrating Purview with third‑party security or governance tools
• Prior ownership of enterprise DLP or information protection programs
• Experience implementing and managing DSPM for AI

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Sr. Manufacturing/Assembly Process Engineer

• Develop the plans and work instructions for the successful handling, manipulation, guidance, and general integration of sub-system components
• Assist in finalizing the strategy for each assembly step, as well active collaboration with the system teams to find the optimum assembly steps, tools, methods, strategies, safety measures, specifications, and other details
• Within the plan development, ensuring tool and personnel access is available as required for system assembly steps as outlined by the system owners
• Be responsible for the plans for part movement at each step and checking for no interferences with other systems during movement and part placement
• Be responsible for construction of the assembly work instruction packets for all sub-assemblies, and the incorporation of them into the assembly work orders to create the optimum assembly and testing sequence
• Provide assistance in development and improvement of the work instruction packet and work order creation process to increase standardization, efficiency, safety, clarity, and overall good communication of the instructions for the success of the assembly process
• Participate in collaborative work with the assembly engineers, tooling engineers, designers, coordinators, as well as direct personnel performing the System Assembly during on-site work

Requirements/Experience:

• At least 2 years technical experience in the integration of complex and large mechanical structures (e.g. aerospace, chemical) and experience in work instruction packet creation
• Bachelor’s or associate degree in a related field, metrology, high-vacuum projects and processes, experience with manufacturing management software, NX, large Component (>10 Ton) lifting experience
• Exceptional attention to detail
• Safety conscious and proactive
• An ability to clearly express and critique ideas
• An aptitude to use data to drive decisions
• An emphasis on elegance and simplicity over complexity
• The ability to thrive in fast-paced, dynamic environments

Manufacturing Process Engineer

As a Manufacturing Process Engineer for printed circuit board assemblies (PCBA), your primary role is to develop and document manufacturing processes for electronic assemblies which yield reliable high-quality assemblies at the lowest possible cost.

In the role of a Manufacturing Process Engineer

• You will develop and implement manufacturing process technologies, methods, and techniques to assist and promote the building of reliable, high quality PCBA assemblies at the lowest possible cost.
• You will develop and maintain product assembly procedures for PCBA & cable assemblies.
• You will provide active consultation to new product development teams regarding manufacturing capabilities, techniques and issues related to design for manufacturability and assembly (DFMA).
• You will assist in the preparation of new product cost estimates including applicable NRE.
• You will be responsible for identifying, specifying, validating, documenting, implementing, and training on new equipment and processes.
• You will design production equipment and fixtures to aid in the assembly of product while improving operator safety/comfort, reducing labor and improving quality.
• You will provide technical training in PCBA/cable manufacturing techniques, methods, and processes to manufacturing associates.
• You will maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, changeovers, and costs.
• You will Investigate and diagnose product manufacturing issues and respond to internal and external customer requests for changes and improvements.
• You will coordinate the implementation of product design changes.
• You will collect, record, and present data applicable to the status of production projects assigned to you.
• You will ensure projects are completed on time.

The skills you need to succeed:

• You must be a self-starter and a strong problem solver.
• You must have the ability to lead and work as a member of a team.
• You must be comfortable in a fast paced, dynamic environment.
• You will have excellent organization and decision-making skills.
• You must have a high level of energy and enthusiasm.
• You will have experience with 2d CAD design of electrical assemblies, schematics, and parts, (PCBA design experience highly desirable).
• You must have experience with validation efforts.
• You must have experience designing, assembling, and debugging automated or semi-automated electromechanical equipment.
• You must understand computer and machine programming and I/O logic.
• You must have strong software abilities: MS Office – proficiency necessary in Word, Excel, Outlook, and PowerPoint.
• You must have experience with MS Project.

Required Education & experience of a successful candidate:

• B.S. in Engineering (or equivalent combination of experience and education) in Electrical (EE or EET), Mechanical (ME or MET), or Industrial (IE, IET).
• 8-10 years of related of work experience.
• Experience with printed circuit board assembly including through hole and surface mount technology and PCBA test.
• Experience implementing lean manufacturing and/or six sigma desirable.

We’re looking for a dynamic, hands-on sourcing professional who can help build and scale a best-in-class sourcing program supporting Private Label and New Product Development. You’ll partner closely with cross-functional leaders to identify the right suppliers, negotiate strong commercial agreements, and create repeatable sourcing processes that improve speed-to-market, cost, and supply continuity.

Summary:

The Sourcing Manager is an individual contributor responsible for leading end-to-end sourcing for Private Label and New Product Development. This role builds repeatable RFx and supplier selection processes, develops supplier partnerships, and translates cross-functional requirements into commercially sound recommendations and agreements. Success requires balancing cost, quality, risk, and speed to enable efficient, compliant product launches and a stronger supplier ecosystem.

Organizational Impact:

Reporting to the Senior Manager, Sourcing, this role will expand sourcing capability by creating scalable tools, templates, and governance that improve speed-to-market, supplier performance, and total cost outcomes. Your work will directly impact new product launch readiness, supply continuity, gross margin, and risk mitigation through strong supplier selection, commercial negotiations, and disciplined performance management.

What Success Looks Like (First 6–12 Months):

• Establish and socialize a clear sourcing intake and RFx process (templates, timeline, roles/RACI, evaluation criteria)
• Deliver on-time supplier selection and contracting for priority NPD/Private Label launches
• Build a qualified supplier pipeline (including international options where appropriate) across priority categories
• Implement basic supplier performance management (KPIs, scorecards, QBR cadence) for awarded suppliers
• Identify and deliver measurable value (TCO improvements, cost avoidance, risk reduction, lead-time and service improvements)

Key Deliverables:

• Standard RFx toolkit (RFI/RFP/RFQ templates, evaluation scorecards, award memo format)
• Supplier due diligence and onboarding checklist (quality, regulatory, capacity, financial, ESG as applicable)
• Negotiation playbook and contracting checklist (commercial terms, SLAs, lead times, payment terms)
• Supplier performance dashboard and QBR agenda
• Category/supplier landscape view for priority areas (options, risks, and recommendations)

Essential Duties and Responsibilities:

• Execute sourcing strategy for Private Label & New Product Development through day-to-day ownership of initiatives, insights, and recommendations
• Build and improve repeatable sourcing processes and governance across Marketing, Product, Quality/Regulatory, Operations, Finance, and Legal
• Lead complex sourcing initiatives end-to-end, managing stakeholders, timelines, and deliverables
• Develop category strategies (make/buy, supplier segmentation, dual sourcing, risk mitigation) informed by market intelligence and business needs
• Own end-to-end RFx events (RFI/RFP/RFQ): strategy, supplier engagement, evaluation, award, and transition to performance management
• Create standardized templates and scorecards that balance total value (price, lead time, quality, service, innovation, sustainability)
• Lead negotiations to optimize total cost of ownership (TCO) and value creation (rebates, payment terms, delivery, SLAs, IP considerations)
• Develop and manage a supplier network, building partnerships that deliver innovation, capacity, quality, and competitive advantage
• Drive supplier performance management (KPIs, dashboards, quarterly business reviews), continuous improvement, and corrective actions
• Conduct market intelligence to understand supply/demand dynamics, cost drivers, regulatory changes, and geopolitical risk
• Partner with Product, Engineering, and Quality to accelerate Private Label and NPD pipelines—from concept to commercialization
• Support proto sampling, validation, and scale-up activities in alignment with quality standards and regulatory requirements
• Ensure design-for-supply, manufacturability, and sustainability are embedded early in product development
• Lead cost modeling, scenario analysis, and benchmarking to inform awards and portfolio decisions
• Track performance to plan (savings, cost avoidance, working capital, resiliency), reporting outcomes and insights to leadership
• Additional job duties as assigned

Skills/Experience Required:

• Education: Bachelor’s degree in Business, Supply Chain, Engineering, or related field
• 5+ years’ experience in sourcing, procurement, and/or purchasing environments supporting product development and commercialization; medical device, medical/clinical expertise, or prior health care experience strongly desired
• Experience working with 3rd party contract manufacturers and/or direct manufacturing partners (medical devices or other healthcare solutions preferred)
• International sourcing experience preferred
• Experience with strategic sourcing and improving supplier performance
• Familiarity with contracting language and experience negotiating contracts with suppliers
• Understanding manufacturing and quality validation processes and best practices preferred
• Strong knowledge of supply chain principles and processes
• Strength in negotiations, cost/price analysis, and purchasing procedures
• Knowledge of bids, RFx events (RFI/RFP/RFQ), and reverse auctions
• Understanding of new product launch and commercialization; experience in product development and manufacturing processes desired
• Excellent communication skills (written and verbal) with demonstrated ability to lead and influence at all levels, including senior stakeholders and business leaders
• Experience with project planning and project management; ability to lead cross-functional project teams
• Proven ability to work successfully in a deadline-driven environment with a sense of urgency
• Proficiency with Microsoft Office (advanced Excel and PowerPoint); experience with CRM and/or sourcing tools a plus

Sarnova is an Equal Opportunity Employer. We offer a competitive salary, commensurate with experience, along with a comprehensive benefits package, including 401(k) Plan. EEO/M/F/Veterans/Disabled. Our mission is to be the best partner for those who save and improve patients’ lives. Excellence in delivering upon our mission is dependent upon having a diverse team that is empowered to bring their full, authentic self to work each day. We strive to create a workplace that reflects the communities we serve, and we are passionate about creating an inclusive workplace that promotes and values diversity.

Akkodis is seeking a Printed Circuit Board Assembly Test Technician for a 6 Months Contract to Hire position with a client located in Binghamton NY 13905(Onsite)

Pay Range: $20/hr. - $24/hr on W2(All inclusive). (The rate may be negotiable based on experience, education, geographic location, and other factors.)

Position Summary

• The Printed Circuit Board Assembly (PCBA) Test Technician is responsible for performing complex technical functions related to the assembly, testing, troubleshooting, and repair of printed circuit board assemblies.
• This role supports departmental output objectives by operating PCBA assembly and test equipment, conducting failure analysis, and contributing to continuous improvement initiatives.

Key Responsibilities

• Perform complex technical tasks related to the assembly, testing, and troubleshooting of PCBAs.
• Operate Gen-Rad Test and Flying Probe Test machines.
• Troubleshoot failed PCBAs and assemblies to the component level.
• Utilize assembly prints, mechanical drawings, electrical schematics, and electronic test equipment including: Digital Multimeters (DMMs), Oscilloscopes, Function Generators, Power Supplies, Frequency Counters, Pressure Indicators
• Perform and document failure analysis results clearly and accurately.
• Interpret electrical schematics and/or mechanical assembly prints depending on assigned focus area.
• Demonstrate understanding of electronic component functionality.
• Apply Environmental Stress Screening (ESS) testing concepts.
• Assist in developing production documentation such as work instructions and troubleshooting guides.
• Perform minor repair and maintenance of production and test equipment.
• Provide training and technical support to production operators and technicians.
• Contribute to production goals through effective repair and quality-focused work practices.
• Maintain commitment to quality, attendance, productivity, and customer satisfaction.
• Work overtime as required to meet business demands.

Education & Experience Required:

• High School Diploma or GED
• Minimum two (2) years of experience in production and/or manufacturing environment
• Associate of Applied Science (AAS) in Electrical or Mechanical Engineering Technology
• Experience in manufacturing, testing, and troubleshooting analog and digital circuits in aircraft instruments or electronic systems

Required Skills & Competencies:

• Strong knowledge of prototype assembly drawings and blueprint reading
• Ability to perform soldering and mechanical assembly of complex, critical components
• Willingness and aptitude to become solder certified
• Knowledge of military standards and ISO 9000 quality systems
• Proficiency in electronic test equipment and measurement tools
• Strong troubleshooting and analytical skills
• Effective communication, collaboration, and interpersonal skills
• Self-motivated, fast learner, and capable of working independently
• Continuous improvement mindset with creative problem-solving abilities

If you are interested in this Printed Circuit Board Assembly Test Technician job in Binghamton NY 13905(Onsite) please contact Ashish Rajput at 61 or For other opportunities available at Akkodis, go to Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act

Los Angeles City Fair Chance Ordinance

Los Angeles County Fair Chance Ordinance for Employers

San Francisco Fair Chance Ordinance