Assembly Jobs in Usa

• 
  
• Once properly trained and/or certified, perform specific tasks including but not limited to, soldering, hardware installation, post coating.
  
• Under close supervision, inspects own work performed to ensure a quality product which conforms to workmanship standards, engineering requirements and design specifications.
  
• Perform in accordance with productivity expectations to meet customer deadlines.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety, Ethics and Compliance, Quality, and attendance requirements.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications and complete trainings as required.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Report to lead or supervisor on work progress and updates.
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Must be able to pass a soldering assessment after training course provided.
  
• Other duties as assigned.
  

• 
  
• Typically requires HS Diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
  
• U.S. Person (U.S. citizen, permanent resident, refugee or asylee) or eligible to obtain necessary export authorizations required.
  

• 
  
• Career Readiness Certification (CRC) strongly preferred.
  
• The ability to interpret schematics and/or technical drawings
  
• The ability to successfully complete training modules associated with job grade.
  
• The ability to follow assembly instruction.
  
• The ability to effectively work in an environment requiring repetitive job responsibilities.
  
• The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  
• The ability to understand end uses of products being built.
  
• Strong written and verbal communication skills.
  
• Attention to detail in order to ensure safety and quality.
  
• Strong organizational skills and ability to multi-task.
  
• The ability to work in a team to support work capacity in a fast-paced environment.
  
• Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
  
• Demonstrated analytical skills and problem-solving abilities.
  
• The ability to take direction from more experienced coworkers, leads and supervisors.
  
• May be standing and/or sitting for 8+ hours.
  
• Overtime eligible
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

Do you love fashion for moms, babies, and kids? Do you like talking with parents and being around children? Then working at Kid to Kid is JUST what you are looking for! We are looking for friendly, outgoing, kid-loving people to join our team who are willing to work hard, multi-task, and take pride in keeping the store clean, organized, and shoppable.

Kid to Kid is a buy-sell-trade store for babies and children. We carry thousands of brands and styles up to 80% off regular retail prices. We buy and sell the best things kids outgrow and pay our vendors cash on the spot. This fast-paced buying and selling means that everyday is different, interesting, and keeps us on our toes. We take pride in creating an upscale resale store that is clean, organized, and inviting.

We're looking for part-time Sales Associates to join our team.

Responsibilities:

• Provide excellent customer service
• Organize racks, tag and process product
• Test toys and assemble equipment
• Ring out customers on the register and teach them how to sell to us
• Help make posts on our social media pages

Benefits:

• Monthly sales bonus potential
• 30% employee discount

Compensation: $10.00 - $13.00 per hour

Kid to Kid is always looking for fun, friendly people to join our team who are willing to work hard, multi-task, and that take pride in keeping the store organized and shoppable. Our team members cross train and work in other areas of the store as needed and there are multiple advancement opportunities. We offer flexible schedules that compliment your busy life, great employee discounts and fun retail environment.

Every day, more than 10,000 kids open a little pink door to a shopping experience that's unmatched for value and selection by any other retail children's store. With more than 125 locations across the United States, Canada and Portugal, Kid to Kid is making a difference in a variety of communities by providing growing families with items that they need and love at a fraction of the retail cost.

Customers love us for our daily-changing selection, our value, and the convenience of selling their outgrown kids' items for cash on the spot. Our product is locally sourced and sustainable, and we actually put money back into the local economy. And our love of kids motivates us raise hundreds of thousands of dollars to build schools in underprivileged countries.

Apply today!

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

• Perform delicate weld operations on very expensive components and assemblies and other difficult details. May necessitate the adaptation of available fixtures.
• Work from specific approved procedures and complex blueprints. Work in close cooperation with weld engineer, weld inspector, and other authorized personnel.
• Reads and strictly complies with weld blueprints, weld procedures, and work instructions.
• Grinding to remove slag inclusions, excessive weld, burrs, or other pre-post steps required to make an acceptable weld.
• Must become certified to all requirements of BWXT contracts pertaining to welding and/or brazing, imposed on BWXT both now and in the future.
• Inspect all work using appropriate measurement instruments.
• Refers all issues/problems to supervisor for disposition.
• Completes and maintains all documentation as directed by work instructions and policies.
• Cleans machine, tooling, and parts.
• Performs machine maintenance, housekeeping, and other duties as assigned by supervision.
• Follows and complies with all operation instructions, work rules, and safety policies.

• High school diploma or its equivalent is required.

• Minimum of two (2) years of experience in manual and automatic gas tungsten arc and/or shield arc welding, completion of an accredited training program will be considered.
• Brazing and soldiering skills, preferred.
• If necessary, be able to demonstrate ability to perform above skills on a test piece.
• Ability to read and interpret complex blueprints, procedures, and work instructions.
• Possess skills necessary to maintain accurate documentation.
• Ability to obtain and maintain all applicable written and operation examinations.
• Ability to obtain and maintain all applicable certifications.
• Possess necessary personal tools.
• Must be willing and available to work any shift (2nd shift: 3pm - 11pm, 3rd shift: 11pm - 7am).

• Competitive salary and benefits package, including health, dental, and retirement plans.
• Flexible work schedules and paid time off to promote a healthy work-life balance.
• Professional development opportunities, including mentorship programs and sponsorship for continuing education.
• An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations.
• The chance to be part of a mission-driven organization making a positive impact on the future of energy.
• Opportunities for continuous learning and training to grow throughout your career!

Oakland, California, Cornerstone Pizza Inc.

About The Job

Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you.

Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you.

Job Requirements And Duties

You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings.

Advancement

Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity.

Diversity

Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential.

Summary Statement

We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first!

General Job Duties For All Store Team Members

• Operate all equipment.
• Stock ingredients from delivery area to storage, work area, walk-in cooler.
• Prepare product.
• Receive and process telephone orders.
• Take inventory and complete associated paperwork.
• Clean equipment and facility approximately daily.

Training

Orientation and training provided on the job.

Communication Skills

• Ability to comprehend and give correct written instructions.
• Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person.

Essential Functions/Skills

• Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator).
• Must be able to make correct monetary change.
• Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed.
• Ability to enter orders using a computer keyboard or touch screen.
• Navigational skills to read a map, locate addresses within designated delivery area.
• Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product.

Work Conditions

Exposure To

• Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks.
• In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas.
• Sudden changes in temperature in work area and while outside.
• Fumes from food odors.
• Exposure to cornmeal dust.
• Cramped quarters including walk-in cooler.
• Hot surfaces/tools from oven up to 500 degrees or higher.
• Sharp edges and moving mechanical parts.
• Varying and sometimes adverse weather conditions when delivering product, driving and couponing.

Sensing

• Talking and hearing on telephone. Near and mid-range vision for most in-store tasks.
• Depth perception.
• Ability to differentiate between hot and cold surfaces.
• Far vision and night vision for driving.

Temperaments

The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions.

Physical Requirements , including, but not limited to the following:

Standing

Most tasks are performed from a standing position. Walking surfaces include ceramic tile \"bricks\" with linoleum in some food process areas. Height of work surfaces is between 36\" and 48\".

Walking

For short distances for short durations

Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location.

Sitting

Paperwork is normally completed in an office at a desk or table

Lifting

Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck.

Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'.

Cases are usually lifted from floor and stacked onto shelves up to 72\" high.

Carrying

Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves.

Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store.

Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray.

During delivery, carry pizzas and beverages while performing \"walking\" and \"climbing\" duties.

Pushing

To move trays which are placed on dollies.

A stack of trays on a dolly is approximately 24\" - 30\" and requires a force of up to 7.5 pounds to push.

Trays may also be pulled.

Climbing

Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance.

During delivery of product, navigation of five or more flights of stairs may be required.

Stooping/Bending

Forward bending at the waist is necessary at the pizza assembly station.

Toe room is present, but workers are unable to flex their knees while standing at this station.

Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day.

Forward bending is also present at the front counter and when stocking ingredients.

Crouching/Squatting

Performed occasionally to stock shelves and to clean low areas.

Reaching

Reaching is performed continuously; up, down and forward.

Workers reach above 72\" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves.

Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes.

Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones.

We are looking for a Dimensional Inspector to join our Pittsburgh facility's Quality team.

Your Responsibilities:

As an Inspector, you will play a key part of our manufacturing quality assurance by performing inspection on various components, subassemblies, and simple manufacturing tooling as required by drawings, specifications, etc.

We Take Care of Our People

Paid Time Off, 401K with Employer Match and Profit Sharing, Health and Wellness Benefits, Learning and Development Opportunities, Referral Program, Competitive Pay, Recognition, Employee Stock Purchase Plan, Inclusive & Supportive Culture

Your Challenge:

• Verify machine setups using various inspection devices.
• Inspect simple manufacturing tooling such as cutting tools, assembly fixtures, and machining fixtures.
• Inspect characteristics associated with the weld process and inspect base material using various inspection equipment.
• Perform liquid penetrant and visual inspection in accordance with ASNT SNT-TC-1A and NAVSEA-250-1500.
• Inspect electrical characteristics of mechanisms for wound coil assemblies (i.e, megger, fluke, HI-POT).
• Verify, and review process documentation, assuring that processes are being performed to internal and external requirements.
• Perform inspections of individual components or subassemblies. Verifying proper fit, or the components assembly while providing data needed for any special machining.
• Be computer literate for inspection duties. This includes: documentation review, labor/time reports, digital photography, communications, along with programs for computer-aided inspection equipment along with using other programs and systems.
• Maintain familiarity with quality procedures related to inspection functions and maintain inspection qualifications in accordance with applicable internal procedures and customer specifications to perform the responsibilities and duties of this position description.
• Take pictures of manufacturing product, processes, and product related items.
• Perform other inspection functions of an equal or less complex nature including duties, inspections, and assignments as referenced in lower inspector position number descriptions.

What You Bring:

• Due to DoD requirements, candidates must be US citizens.
• Must be able to obtain and maintain DoD Security clearances and approvals.
• Must be able to read blueprints for machined parts (ASME Y14.5) and have an understanding of shop mathematics, to include basic algebra and trigonometry.
• Minimum of one year inspection and/or machining experience
• Minimum of a high school diploma or its equivalent gained through training and/or experience in mechanical areas.

Who We Are:

EMD, a business unit of Curtiss-Wright in Cheswick, PA designs, manufactures, tests and provides after-market support for the most advanced, proven and reliable critical function pumps, motors, generators, seals, control rod drive mechanisms and power conditioning electronics available anywhere in the world today.

Curtiss-Wright EMD has a long-standing and distinguished reputation for the design, development, manufacture and qualification of critical-function machining solutions for the United States Navy and the commercial nuclear utility industry.

Hiller's 17 locations across 4 states, proudly offers a 100% satisfaction guarantee of high-quality residential home services. With more than 34 years in business, Hiller's family includes more than 850 Happy Faces, and a fleet of over 600 vehicles.

At Hiller, we are committed to investing in our employees to help them reach their full potential. Through the development of trade knowledge and soft skills, our employees can succeed in their career AND family goals. With our core value of CARE and standards that define who we are as a company, you will have the opportunity to build a lucrative and rewarding career.

Here are even more reasons to join the Happy Hiller Team!

• Our Family Owned & Care Culture
• Healthy Work/Life Balance
• Established Career Paths
• Advancement Opportunities
• Year-round work NO LAYOFFS
• 401k Plan w/ Company Match
• Employee Referral Program
• Regular Performance Reviews
• Paid Training in our state-of-the-art facility

Medical, Dental & Vision insurance

Long and Short-term disability

Company paid $50,000 life insurance

Company paid vacation

Paid holidays

Medical Flex Spending accounts Family care

Position Responsibilities:

• Create a positive customer experience by completing calls correctly the first time with quality and care to applicable codes and to Hiller standards to avoid refunds and recalls ensuring customer satisfaction.
• Adjust, repair, replace sewage and sump pumps.
• Communicate the benefits of Club Memberships.
• Complete all required documentation on services, collect, record, and deliver fees to designated office administration.
• Consistently provide accurate True Transparency pricing.
• Cut, thread, assemble and install pipes; connect valves; caulk joints; and test finished job by allowing water to flow through correctly.
• Perform a thorough and accurate plumbing inspection including Health & Safety Checklist and communicate findings to the customer in a written option sheet.
• Perform all plumbing service and replacements to applicable codes.
• Repair of drain, sewer, and water lines.
• When issues are identified, prepare a detailed finding report with pictures to discuss with the customer, present repair options to include cost using the options sheet.
• Perform other duties as assigned.

Education/Certification Requirements:

• Kentucky Journeyman Plumbing License preferred
• Experience preferred in installation, maintenance, troubleshooting and correcting diverse plumbing service issues.
• A High School diploma or general education degree (GED) required.
• A valid driver's license

$25 - $35 an hour

We sincerely thank all applicants in advance for submitting their interest in this position.

Hiller is an EEOC employer.

Applicants will be required to undergo pre-employment drug screens and background checks.

Apply today if you have what it takes to be a part of the industry's best team in the home service industry!

Level 1 Assistant Manager - 1991 NE Cornell Rd.

Hillsboro, Oregon, LIXIOY OR INC.

Wage rates: All inside positions start at minimum wage and raises are given upon completion of training evaluations completed by team member and manager. For assistants this ranges from $15.95-$18.26. Monthly bonuses are offered if criteria and responsibilities are met- they are not guaranteed.

You were born to be the boss. We know. You get up in the morning and you make sure everyone else in the house is doing what they need to do. Then you go to work and you make sure that everyone there is doing what they need to do, even your boss. You just do that because you've always done it. Well maybe it's time you moved up. You want to be the boss? Well now's your chance - Domino's Pizza is hiring bosses - more specifically assistant managers. It's a tough job, one that needs a natural like you. Of course, you'll need some skills - judgment, math and the ability to multitask. You'll be working for a company that's fun and flexible. Not to mention, it's work experience you're going to use for a long time to come. You've had our pizza delivered to you, now help us be the best in pizza delivery. Go on, boss, show us what you've got.

Job Requirements and Duties: You are responsible for everything that happens during your shift. This includes all cost controls, inventory control, cash control and customer relations. You must set the example. You must follow ALL policy and procedures 100% of the time and expect the same from your crew. In addition: Staffing, paperwork, cost controls, cash control, food management, work to a schedule, perfect image and adherence to standards, great customer service, attendance & punctuality, transportation to/from work, store cleanliness, marketing, profitability.

Advancement: Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From assistant manager to general manager, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity.

Diversity: Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential.

We are an equal opportunity employer and encourage all candidates to apply. Accommodations during the application process, interviews, hiring and employment are available. All any candidate needs to do is let us know if an accommodation is needed.

Summary Statement: We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's, our people come first!

General Job Duties For All Store Team Members: Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily.

Training: Orientation and training provided on the job.

We abide by OR State requirements for sick pay. Hours: All scheduled hours are based off what employee is available for and what the store needs. All positions are part time unless otherwise stated. Every employee has the opportunity to work into full time as long as the store has the hours to accommodate by completing training, being reliable for shifts and communicating full time needs with manager.

Communication Skills: Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Ability to communicate and interact respectfully and effectively with people across cultures, abilities, genders, ethnicities, and races.

Essential Functions/Skills: Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product.

Work Conditions: Exposure to varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. Varying and sometimes adverse weather conditions when delivering product, driving and couponing.

Sensing: Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. Far vision and night vision for driving.

Temperaments: The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. Willingness to jump in and perform any job necessary.

Physical Requirements, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile \"bricks\" with linoleum in some food process areas. Height of work surfaces is between 36\" and 48\".

Walking: For short distances for short durations. Walking or standing most of shift besides breaks.

Sitting: Paperwork is normally completed in an office at a desk or table.

Lifting: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Cases are usually lifted from floor and stacked onto shelves up to 72\" high.

Carrying: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray.

Pushing: To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24\" - 30\" and requires a force of up to 7.5 pounds to push. Trays may also be pulled.

Climbing: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance.

Stooping/Bending: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day.

Forward bending is also present at the front counter and when stocking ingredients.

Crouching/Squatting: Performed occasionally to stock shelves and to clean low areas.

Reaching: Reaching is performed continuously; up, down and forward. Workers reach above 72\" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones.

Hand Tasks: Eye-hand coordination is essential. Use of hands is continuous during the day. Frequently activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists. Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter. Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes. Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes.

Machines, Tools, Equipment, Work Aids: Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel.

Job Description: This job posting is for a position in a store owned and operated by an independent franchisee, not Domino's Pizza LLC, Domino's Pizza Franchising LLC, or Domino's Pizza, Inc. (\"Domino's Corporate\"). This means, among other things, that the independent franchisee is alone responsible for and will independently make all decisions concerning employment matters for the store, including those relating to hiring, firing, discipline, supervision, compensation and benefits, staffing, and scheduling. Domino's will not receive a copy of any application you submit for this

• 
  
• Assemble Product by referring to the Engineering Drawings The assembler will refer to Bill of Material's, sales / assembly drawings, and master comments from the QAD system and correctly interpret them. Assembler will evaluate product for correct performance and visual characteristics.
  
• Correctly interpret production documentation which includes work instructions, assembly processes and test procedures. Input test results into the First Pass Yield database and accurately complete First Article Inspection.
  
• Work as part of a team to achieve departmental goals. Should be able to meet the hourly targets set for the assigned area. Must attend daily morning huddles and All Hands Meetings, Update work station KPI
  
• Maintain work area in accordance with Safety policies and 5S principles. Apply continuous improvement techniques to the work area. Should adhere to PPE policies.
  
• Follow quality control checks to ensure products meets standards and report safety incidents and quality issues on the floor.
  

• 
  
• Must pass a basic Math and English test with 75% accuracy and dexterity test
  
• Must be a high school graduate or equivalent/GED, and ability to read and write English.
  
• Ability to read blueprints, use pneumatic and basic hand tools
  
• Ability to meet consistent attendance
  

• 
  
• Must be a quick learner and be able to follow procedures and written documentation to build product
  
• Willing to learn and complete audits on 5S, kanban, and participate in continuous improvement activities
  
• Must be able to sit or stand for long periods of time. Position demands some repetitive motion tasks (pushing/pulling and gripping)
  
• Ability to lift up to 35 lbs.
  

• Computer usage to the point of data input.