Arraylist Methods Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking an experienced senior-level engineer to lead the Signature Integrity team in St. Louis, Missouri as a Signature Integrity Chief Architect for the next generation of advanced air systems.

Position Overview: Lead the development of the Signature Integrity Program to support manufacturing and sustainment of the stealth characteristics of an advanced Air Dominance platform.

Key Responsibilities:

• Develop and execute the program's signature integrity vision.
• Integrate Signature Integrity Software, Supportable LO (SLO), and Signature Assurance and Verification (SAV) teams with manufacturing, QA, Product Support, M&P, and System Engineering.
• Oversee the development of supportability technology, maintenance and QA processes, and signature assessment methods.
• Define verification requirements, criteria, and tools, and correlate signature data for manufacturing and sustainment.
• Manage the program's signature maintenance software system.
• Collaborate with the Signature Integrity manager to implement the signature integrity plan, providing technical vision and leadership to a diverse engineering integrated product team (IPT).
• Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for the LO subsystem's manufacture and maintenance.
• Develop high-level and detailed designs consistent with requirements and specifications
• Validate designs through various methods of review, testing and analysis
• Identify designs, materials, tools or methods of improvements to reduce LCC for users.
• Mature data collection and analysis tools and system to efficiently direct LO maintenance actions by users.

Other Responsibilities May Include:

• Agility: Candidates may work across multiple projects to coordinate a consistent approach/solution to signature integrity. Strong organization and documentation skills will be needed to manage multiple simultaneous projects in various states of maturity.
• Technical writing: Work on specifications, procedures, and reports
• Data visualization and communication: Disseminate results and status to project stakeholders. Statuses may be a frequent as weekly where the candidate would be representing the Boeing Company to the Government and/or various suppliers
• Travel: Some travel is expected, ranging from a few days to a few weeks up to 10%.
• Support: Candidates will interact with personnel doing fabrication and testing of prototypes and aircraft parts and systems

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 10+ years working LO Engineering Processes
• 10+ years' work experience with Reliability & Maintainability, Product Support, or Materials & Processes Engineering
• Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required)

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

Shift:

This position is for 1st Shift

Relocation:

This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $164,900 - $223,100

Applications for this position will be accepted until Apr. 01, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Lead Cook is responsible for cooking and preparing food using standard recipes and production guidelines while following food safety, food handling, and sanitation procedures. The individual in this role should safely handle knives and equipment including grills, fryers, ovens, broilers, etc. The Lead Cook may supervise employees and delegate responsibilities. The responsibilities of the position may vary by location based on client requirements and business needs.

• Schedules and assigns daily work activities to staff and supervises the completion of tasks.
• Trains and guides staff on job duties, standard food safety and sanitation procedures, cooking methods, etc.
• Cooks and prepares food following production guidelines and standardized recipes
• Sets up workstation with all needed ingredients and equipment
• Prepares ingredients by measuring, weighing, mixing, chopping, trimming, and peeling food items
• Safely uses all food utensils including knives
• Operates equipment such as ovens, stoves, slicers, mixers, etc.
• Bakes, roasts, broils, steams, and uses a variety of cooking methods on meats, vegetables, and other foods
• Arranges, garnishes, and portions food following established guidelines
• Properly stores food by following food safety policies and procedures
• Cleans and sanitizes work areas, equipment, and utensils
• Maintains excellent customer service with a positive attitude towards guests, customers, clients, co-workers, etc.
• Follows Aramark safety policies and procedures including food safety and sanitation
• Ensures security of company assets
• Produces and maintains work schedules and may prepare production records.
  

At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.

• Previous supervisor experience in a related role preferred
• Experience as a cook or related role required
• Ability to work independently with limited supervision required
• Proven knowledge of the basic principles of food preparation, various cooking methods, and food safety regulations such as proper food handling, sanitation, and storage
• Food safety certification required
• Demonstrates basic math and counting skills
• Demonstrates effective interpersonal and communication skills, both written and verbal
  

This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE).

Our Mission

Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet.

At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.

About Aramark

The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.

Thank you for your interest in the Sacramento City Unified School District! For more than 160 years, SCUSD has served Sacramento families with quality public schools that prepare students for college and careers. We offer a wide variety of programs to meet different student needs in a district that reflects the diversity of our city and state. Become a Sacramento City Unified employee and join a team committed to Sacramento's future. We approach each day with creativity and passion, knowing that the young lives we inspire are Sacramento's next generation of leaders. Join us. You'll love your inspiring career in the heart of Sacramento.

See attachment on original job posting

TRAINING, EDUCATION, AND EXPERIENCE:Any combination equivalent to: graduation from high school, one year of warehouse or related experience, andexperience driving large vehicles with power-lift gates, operating forklifts, and electric pallet jacks.LICENSES AND OTHER REQUIREMENTS:Valid California Class C driver's license preferred, and provide proof of insurance; employee entrance evaluation(lifting test); Department of Transportation drug and alcohol testing; forklift certification required and must beobtained within one year of employment; and acquire Food Safety Certification within first year of employment.

Refer to the job posting for a list of required skills or if you have any questions or need further clarification, please contact the email address listed in the posting.

TRAINING, EDUCATION, AND EXPERIENCE: Any combination equivalent to: graduation from high school, one year of warehouse or related experience, and experience driving large vehicles with power-lift gates, operating forklifts, and electric pallet jacks. LICENSES AND OTHER REQUIREMENTS: Valid California Class C driver's license preferred, and provide proof of insurance; employee entrance evaluation (lifting test); Department of Transportation drug and alcohol testing; forklift certification required and must be obtained within one year of employment; and acquire Food Safety Certification within first year of employment.

Comments and Other Information

KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: Basic methods, practices, and terminology used in warehouse operations. Procurement procedures associated with ordering, receiving, processing, storing, and delivering supplies and equipment. Basic math skills. Proper methods of lifting. Basic inventory methods and practices. Safe driving practices and traffic laws. Local street names and geography. Preventive maintenance requirements of automotive equipment. Safety procedures related to operation of forklifts, pallet jacks, and other warehouse equipment. Interpersonal skills using tact, patience, and courtesy. Health and safety regulations, and hazards and safety precautions of this type of work. ABILITY TO: Perform the basic function of the position. Shelve, arrange and label stock. Operate a forklift and other warehouse machines and equipment. Drive a truck to pick up and deliver supplies, equipment, and materials. Operate heavy hand-truck loads. Maintain inventory. Perform mathematical calculations quickly and accurately. Drive trucks in confined areas and while children are present. Lift heavy objects according to safety regulations. Keep accurate and current records of stock transactions. Understand oral and written directions. Work with school improvement initiatives that close student achievement gaps between racial, ethnic, and economic groups by working with all of the diverse communities. Warehouse Worker -- Continued Page 3 Maintain effective relationships with those contacted in the course of work. Observe legal and defensive driving practices. Meet state and district standards of professional conduct as outlined in Board Policy. WORKING CONDITIONS: SAMPLE ENVIRONMENT: Warehouse work and school site environment; drive a vehicle to conduct work. SAMPLE PHYSICAL ABILITIES: Lift heavy objects; lift warehouse stock; work with heavy lifting machinery; reach overhead, above the shoulders and horizontally; stand for extended periods of time; bend at the waist; dexterity of hands and fingers to operate warehouse equipment. SAMPLE HAZARDS: Drive a vehicle during adverse weather conditions; work with heavy lifting machinery. The Sacramento Unified School District prohibits discrimination, intimidation, harassment (including sexual harassment) or bullying based on a person's actual or perceived ancestry, color, disability, gender, gender identity, gender expression, immigration status, nationality, race or ethnicity, religion, sex, sexual orientation, or association with a person or a group with one or more of these actual or perceived characteristics or affiliation with Scouting America. For questions or complaints please contact the following staff: Title IX Coordinator (personnel related): Melinda Iremonger - 5735 47th Avenue, Sacramento, CA, 95824 - 916.643.7446 - ; Title IX Coordinator (student only related) & Equity Compliance Officer: David Van Natten - 5735 47th Avenue, Sacramento, CA, 95824 - 916.643.7420 ; Chief Human Resources Officer: Cancy McArn - 5735 47th Avenue, Sacramento CA, 95824 - 916.643.7474 - ; Section 504 and Title II ADA Coordinator (student related): Cameron Olson - 5735 47th Avenue, Sacramento CA, 95824 - 916.643-7912- , Title II ADA Coordinator (personnel related): Keyshun Marshall- 5735 47th Avenue, Sacramento CA, 95824 - 916.643-7901- .

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

ProSidian Consulting is seeking a Logistics Specialist II located at The Federal Aviation Administration Logistics Center (FAALC), located at Mike Monroney Aeronautical Center (MMAC) to support an engagement for a Fed. Gov Agencies that provide Aviation Administration and Logistics support to US Govt. Agencies. The Agency supports a broad range of systems, consisting of thousands of individual pieces of equipment in the Facilities, Surveillance, Navigational Aids, Automation and Communications, Weather Systems and other agencies. In support of National Airspace System systems and other equipment, The Aviation Transportation Agency also provides configuration management, hardware and software documentation, modification(s), field support, systems, and acquisition support. Because The Aviation Transportation Agency Groups/Product Divisions provide technical support and supply support to the National Airspace System (NAS) field facilities and other government agencies, the work to be performed is primarily in support of aircraft guidance systems, surveillance equipment, automation and communications systems and technical data.

The work to be performed is primarily in support of aircraft guidance systems, surveillance equipment, automation and communications systems and technical data. To accomplish the work efforts, The ProSidian Engagement Team shall provide a wide variety of logistics/professional support personnel. Work shall include but not be limited to the following areas: a] Drafting Services and Computer Aided Engineering Graphics (CAEG) Support; b] Engineering Drawing Preparation, Maintenance, Filing and Reproduction, and c] Maintain FAALC Engineering Library (1) Maintain Engineering Drawing Copies, (2) Maintain Computer Databases, (3) Maintain FAA Specifications, (4) Maintain Electronic Equipment Modifications, (5) Maintain National Stock Number Files, (6) Maintain FAA Equipment Modification Publications, and (7) Provide Engineering Library Research Assistance such as [a] Environmental Safety and Occupational Health Support [b] Lean Six Sigma Quality Improvement Support, [c] Logistics Specialist Support, [d.] Management and Program Analyst Support, and [e] Project Management Support.

Provide Logistics Specialist Support as a Logistics Specialist II on behalf of US Federal Government Clients such as The Federal Aviation Administration Logistics Center (FAALC). This support shall include the planning, scheduling, monitoring, estimating and coordinating of assigned tasks. This includes Consulting Services serving as a knowledgeable expert and team member to develop solutions in infrastructure support management, logistics deployment, acquisition planning, life cycle management, data analysis, research studies, material staging, installation of material and equipment, electronic repair and testing, and precision equipment calibration. Additional areas of focus including support for Engineering & Manufacturing Repair Services to contribute technical solutions through a network of highly skilled engineers and manufacturing and repair facilities.

Work as part of teams providing Nationwide Distribution Services and support the ability to manage and track vast amounts of material and equipment nationwide which require professionals that . We specialize in distribution, relocation, transportation and delivery of products, equipment or supplies. On occasion, the Logistics Specialist II shall participate in Activities related to On-line Direct Acquisition of Materials and Supplies.

Logistics Specialist II Tasks may include but shall not be limited to items such as the following:

• Evaluate initial provisioning and supply support criteria and data and analyze the effectiveness and efficiency of the criteria and data.
• Determine appropriate stock and repair levels using analytical tools such as Repair Level Analysis and Spares Quantification.
• Review programs for adequacy and efficiency of supply support provided to Fed. Govt./ Client [such as The Federal Aviation Administration Logistics Center (FAALC)], customers. Evaluate forecasting methods and make recommendations for adjustment to meet supply support needs.
• Analyze information and statistics relative to specific items and select NAS, CBP, DoD and other agencies systems and propose resolutions which conform to stated goals and objectives.
• Provide assistance to inventory managers by gathering historical information on demand rates, failure rates, or other support requirements as needed for maintaining appropriate inventories.
• Evaluate plans for supporting new systems and for providing continuing support for obsolete and/or non-procurable systems and equipment.
• Support material workflow requirements in meeting maintenance, repair and overhaul objectives for the supply chain.
• Analyze programs, costs, current and forecast budgets, operational reports and schedules, production and procurement lead times and report results and conclusions.
• Support inventory managers and equipment specialists in evaluating non-catalog support NAS systems.
• Perform complex logistics analyses/studies of proposed program plans for effectiveness in meeting goals, objectives and accomplishing program activities.
• Analyze logistics data and documentation for select programs and provide recommendations for support or improvement.

Data security must be provided as prescribed by the standard operating procedures. Logistics Specialist II Candidates will be considered for a position based on the candidate's qualifications as they relate to the skills, experience, and responsibility requirements for the position. The Logistics Specialist II will perform a variety of technical and business tasks in support of the Planning, scheduling, monitoring, estimating and coordinating functions for both operations and engineering materials. The Logistics Specialist II will be required to manage multiple types of shipments and direct personnel on associated tasks.

Responsibilities include but are not limited to: Meeting on time deliverables including program costs and scheduling requirements. | Prioritizing daily workloads | Communicating directly with internal and external customers | Capture and record performance metrics | Maintain training records | Evaluate cost saving opportunities | Consistently maintaining a safe work environment

Required Skills: 4 year degree from an accredited University in Business Administration, Business Management, Commerce, Finance, Supply Chain or related field applicable to the job function | 2 years' experience in a logistics, supply chain or related field | Experience presenting to large groups | Knowledge of MS Office applications including Excel and Word | Strong written and verbal communication skills

Desired Skills: Strong analytical skills and an aptitude for data analysis | Strong interpersonal skills | Detail oriented | Ability to multi-task in a fast-paced work environment | U.S. Citizenship is required.

Leadership, Communication, Government financial management, budgeting, financial modeling, reporting, presentations and experience performing Federal Government Management such as Cost Estimation, Acquisition, Acquisition Database services, Negotiations, Communication. Must be able to pass background check and maintain security clearances to maintain confidentiality. This labor category includes the following levels and associated required years of experience: Logistics Specialist II (Min. Experience: 2 Yrs.) | Logistics Specialist ll (Min. Experience: 4 Yrs.) Logistics Specialist lll (Min. Experience: 6 Yrs.).

a. Experience (All levels). Experience shall include evaluating initial provisioning and supply support criteria; evaluating plans for supporting new systems and for providing continuing support for obsolete and/or non-procurable systems and equipment; determining appropriate stock and repair levels using analytical tools such as Repair Level Analysis and Spares Quantification; reviewing programs for adequacy and efficiency of supply support and evaluating forecasting methods to meet supply support needs; providing assistance to inventory managers by gathering historical information on demand rates, failure rates, or other support requirements for maintaining appropriate inventories; supporting material workflow requirements in meeting maintenance, repair and overhaul objectives for the supply chain; analyzing programs, costs, current and forecast budgets, operational reports and schedules, production and procurement lead times and preparing reports; performing complex logistics analyses/studies for effectiveness in meeting program goals; and analyzing logistics data and documentation for select programs and providing recommendations for support or improvement.

b. Knowledge (All levels). Specialized knowledge of FAA systems, equipment, procedures, operations, logistics, and budgeting is highly desired. Knowledge of logistics and management principles is required. Knowledge of analytical and evaluative methods and techniques for schedule, inventory, and logistics performance, and for assessing program, administrative, and management effectiveness is required.

c. Education (All levels). A high school diploma or equivalent is required. A Bachelors of Arts degree in Business Administration, or an Associate's degree in Logistics or Business, is highly desired.

Some Task efforts may be very extensive and require the work be broken into Subtasks. However, the various task projects shall include but not be limited to the following:

• Provide complete drafting services in support of the FAALC including operations and maintenance of the drafting file system, reproduction of drawings, and preparation of engineering drawings, electronic artwork and electronic media.
• Provide complete FAALC Technical Library maintenance services.
• Provide Environmental, Safety and Occupational Health Specialist services to include but not limited to the training, monitoring, and providing technical guidance for all aspects of the planning, initiation, execution, monitoring and controlling of a project, and the closeout of assigned projects.
• Provide quality improvement services, using Lean Six Sigma methodology and techniques to the FAALC, including facilitating, planning, coordinating, reviewing, evaluating and reporting all activities for the purpose of completing organizational continual improvement projects.
• Provide logistics expertise to the FAALC including analysis and recommendations for planning, scheduling, monitoring, estimating and coordinating of assigned logistics tasks associated with FAALC service provider responsibilities in the logistics element areas of supply support, support equipment, maintenance support facilities and Packaging, Handling, Storage and Transportation.
• Provide management and program analysis services to the FAALC including planning, scheduling, conducting, and reporting analyses of management, administrative and logistics programs and procedures to determine resource requirements and utilization, workflow processes, and the efficiency

The Lead Cook is responsible for cooking and preparing food using standard recipes and production guidelines while following food safety, food handling, and sanitation procedures. The individual in this role should safely handle knives and equipment including grills, fryers, ovens, broilers, etc. The Lead Cook may supervise employees and delegate responsibilities. The responsibilities of the position may vary by location based on client requirements and business needs.

• Schedules and assigns daily work activities to staff and supervises the completion of tasks.
• Trains and guides staff on job duties, standard food safety and sanitation procedures, cooking methods, etc.
• Cooks and prepares food following production guidelines and standardized recipes
• Sets up workstation with all needed ingredients and equipment
• Prepares ingredients by measuring, weighing, mixing, chopping, trimming, and peeling food items
• Safely uses all food utensils including knives
• Operates equipment such as ovens, stoves, slicers, mixers, etc.
• Bakes, roasts, broils, steams, and uses a variety of cooking methods on meats, vegetables, and other foods
• Arranges, garnishes, and portions food following established guidelines
• Properly stores food by following food safety policies and procedures
• Cleans and sanitizes work areas, equipment, and utensils
• Maintains excellent customer service with a positive attitude towards guests, customers, clients, co-workers, etc.
• Follows Aramark safety policies and procedures including food safety and sanitation
• Ensures security of company assets
• Produces and maintains work schedules and may prepare production records.
  

At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.

• Previous supervisor experience in a related role preferred
• Experience as a cook or related role required
• Ability to work independently with limited supervision required
• Proven knowledge of the basic principles of food preparation, various cooking methods, and food safety regulations such as proper food handling, sanitation, and storage
• Food safety certification required
• Demonstrates basic math and counting skills
• Demonstrates effective interpersonal and communication skills, both written and verbal
  

This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE).

Our Mission

Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet.

At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.

About Aramark

The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!