Adecco Shift Hours Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest:  

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest:  

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

A leading food service equipment manufacturer is seeking a 2nd Shift Production Manager to lead and optimize 2nd shift production operations. The ideal candidate is a hands-on manufacturing leader with strong supervisory experience and deep knowledge of shop-floor processes. Working collaboratively, the new leader will deliver production targets by managing personnel, improving processes, and maintaining safety and quality standards while ensuring operational continuity across shifts.

• Salary + Additional Benefits:$85,000-$100,000 + Performance Bonus
• Medical Insurance
• Dental Insurance
• Vision Insurance
• Holiday Pay
• PTO
• Sick Time

Location: Garland, TX 75041

Type of Position: Direct Hire

Hours: Mon-Thurs 3:00 PM – 2:00 AM

Responsibilities:

• Supervise all shop floor manufacturing operations for building stainless steel equipment.
• Manage key performance indicators (KPIs) such as production volume, quality, cost, and safety.
• Meet all established production schedules and maintain supervision of all production personnel activities.
• Maintain clear and detailed communication with the 1 st Shift Manager and Director of Manufacturing to ensure seamless operational transitions between shifts.
• Collaborate with the Director of Manufacturing on employee issues and concerns.
• Train, evaluate, develop, discipline, and communicate continuously with shop workers.
• Manage material shortages, ensure appropriate raw material inventory levels are maintained, and confirm all production paperwork is completed on time and accurately.
• Foster a safe work environment by promoting, supporting, and enforcing safe work practices.
• Address facilities and maintenance issues for all shop equipment.
• Lead and/or participate in department improvement initiatives.
• Maintain shop schedules, track labor hours, and manage procurement needs.
• Communicate through Director of Manufacturing all engineering changes required / corrections needed.

Requirements:

• Five (5) or more years of experience supervising and leading a team of 20 - 40 employees in a manufacturing environment
• Prior hands-on experience fabricating and building sheet metal assemblies is essential
• Strong leadership and supervisory skills, with the ability to plan, lay out, fabricate, and assemble sheet metal assemblies using personnel, hand tools, power tools, and machines
• Ability to read and interpret blueprints, sketches, and product specifications to determine the sequence and methods of fabrication and assembly
• A solid understanding of material gauges and sheet metal types (e.g., galvanized, stainless steel, aluminum, plastic, and glass) according to product specifications
• A complete understanding of CNC fabricating machines such as lasers, brake presses, tubing cutter, specialty saws and routers
• Skillful in problem-solving part inconsistencies by inspecting components and assemblies using drawings and measuring tools
• Computer proficiency is required, as this role entails daily use of programs including MRP, Excel and Google Docs
• Complete knowledge of manufacturing processes and requirements, with a clear ability to evaluate each function
• Bilingual (English/Spanish) speaking is a plus

Due to the high volume of applications we typically receive, we regret that we are not able to personally respond to all applications. However, if you are invited to take the next step in the process, you will typically be contacted within one week of submitting your application.

• Day Shift: $18.50/hr.
• Night Shift: $19.50/hr.

• Day Shift: Monday - Wednesday, 7:00 am - 7:00 pm (hours may vary on Thursday)
• Night Shift: Monday - Wednesday, 7:00 pm - 7:00 am (must be available as needed on Thursday)

• Medical, dental, and vision insurance
• Flexible Spending Account (FSA)
• Life insurance
• Disability insurance
• Accident insurance
• Critical illness insurance

• Operate injection molding machines
• Use hand and power tools effectively
• Inspect parts to ensure they meet quality standards
• Package and label completed parts
• Count and weigh parts at the end of each shift
• Track scrap and production counts
• Rework production components as needed
• Attend training sessions and mandatory meetings
• Perform other duties as assigned

• Previous press operator experience is a plus but not required
• Ability to accurately use counting scales
• Familiarity with quality assurance systems preferred
• Dependable and detail-oriented

Tomorrow is our home. At BSH, People Matter. Bring your unique skills, capabilities, and experiences to our dynamic teams where your contributions will drive our innovation culture. We strive to be a workplace that values people and supports opportunities for continuous professional and personal growth. As a leading manufacturer of home appliance brands Bosch, Gaggenau, and Thermador, we prioritize having a consumer centric mindset and creating positive experiences for the consumer throughout all interactions with our products and services. Join us now and give your career a home. You Belong Here.

New Bern, NC/ Full-time

Your responsibilities

The Clamp Truck Operator is responsible for loading and unloading product that is shipped and/or received at the Central Distribution Center. As a Clamp Truck Operator, it will be your responsibility to follow and abide by all BSH and CDC rules and procedures to the best of your ability.

Safety:

• Safely operates industrial clamp/lift truck, manual pallet jacks, and other forms of materials handling equipment on the distribution floor.
• Adheres to BSH guidelines by wearing and utilizing required PPE.

General:

• Maintains material handling equipment including electronic computers, mechanical scales, doors, door locks, door levelers, battery chargers and related equipment.
• Loads materials into vehicles, containers, and other forms of transportation installing strapping, bracing or padding to prevent shifting or damage in transit.
• Conveys materials from storage to designated staging areas and records serial numbers using the correct lifting apparatus for the designated product.
• Follows written or oral instructions to ascertain materials or containers to be moved in a timely, scheduled manner to the customer.
• Unloads and sorts materials from trailers and locate in the Distribution Center, either by directed put away or open location.
• Order picks and records number of units of materials moved or handled on a pick ticket.
• Attaches identifying tags or labels to materials or marks information on cases, boxes or other containers.
• Lifts heavy objects by hand or with handling equipment and cleans work area, machines and equipment.
• Palletize and wrap product for shipping.
• Completes PM sheets for his/her lift before each shift and reports any issues immediately.
• Demonstrate efficient knowledge of handling signage (fragile, this side up, etc.)
• Report all warehouse damages
• Must maintain inventory accuracy within .5%
• Segregate all quality holds to insure they are not shipped to the customer
• Performs all other duties assigned

Equipment:

• Standard Forklift Equipment Previous experience required. Operate both safely and efficiently.
• Clamp Truck Equipment Previous experience preferred. Operate both safely and efficiently.
• Maintain proper clamp pressure and handling requirements.
• Utilize designated clamp pressure by product type to ensure properly handling techniques.
• Demonstrate proper clamp positioning by product type to ensure damage free handling.
• Proper handling of clamp equipment while traveling to ensure loads are raised to the proper height from the ground.
• Proper handling of clamp equipment while traveling with an oversized load.
• Proper handling of clamp equipment when stacking and unstacking product.
• Ensuring slip sheets are properly utilized when stacking to ensure stability.
• Inspect clamps to ensure they are able to be safely operated while maintaining damage free product.

Your profile

• High-School Diploma Required
• Certification (Lift Truck Certificate) Required
• 0-2 Years of Experience (Warehouse / Distribution experience) Required
• Ability to work without constant supervision and the ability to think and act independently.
• Ability to use RF scanners
• Ability to safely operate various kinds of material handling equipment (fork lifts, pallet jacks, dock levers, etc.)
• The Labor Grade within this Job Classification is dependent on experience, knowledge, responsibility, performance, dependability and job complexity
• Excellent interpersonal skills.
• Demonstrable understanding of materials, inventory control, and overall concept of Distribution.
• High Degree of Accuracy
• RF Scanner, calculator, fork lift, basiloid, clamp truck, order picker, Drexel

Your Pay & Benefits

The pay range posted for this position is based on the location noted in the posting title. Exact compensation offered may vary based on your specific skillset and work location. If the position is bonus or incentive eligible then the payments range from 0% to 200% of target with details laid out within the plan document.

Benefits offered include the following:

• Medical, dental, vision, life insurance, short and long term disability benefits, employee assistance program (EAP), Adoption Benefits, HSA, FSA, and Dependent Care FSA starting on the first day of the calendar month following date of hire
• Eligible to participate in the 401(k) plan, which offers a fully vested 100% employer match on the first 4% of compensation contributed by employees
• Annual employer funded profit sharing dependent on company profitability
• Opportunities for employees to participate in a company sponsored Wellness plan and earn lower medical care premiums
• 2 weeks of paid vacation for all non-temporary status new hires below Director level positions. Vacation entitlement increases based on years of service with BSH.
• Unlimited paid vacation for all Director and above level positions.
• The greater of (a) 40 hours of paid sick leave or (b) state or local minimum requirements for paid leave (Non-Production Line)
• 40 hours of paid personal leave (Production Line)
• 12 days of paid holidays per year (max 8 hours paid per day)
• Employee, friends, and family discount program for company products.
• BSH provides ongoing product training, uniforms, computer tablet, cell phone and a company vehicle for eligible positions.

Further information

Please visit and learn about what makes BSH a Top Employer! BSH is an equal opportunity employer and does not discriminate on the basis of race, religion, color, ancestry, national origin, caste, sex, sexual orientation, gender, gender identity or expression, age, disability, medical condition, pregnancy, genetic makeup, marital status, military service, or any other protected class. By including everyone and ensuring equal opportunities, BSH unleashes its full potential - EOE / AA Employer. This position is eligible for the Employee Referral Bonus program. We participate in E-Verify.

Classification: Exempt

Location: Maintenance – 8800 Corridor Road, Annapolis Junction, MD

Reports To: Maintenance Manager or their designee

Salary: $79,500 - $83,000 (DOQ)

Schedule: Tuesday – Saturday 3:30 PM – 12:00 AM (15:30 hours – 00:00 hours) ***subject to change based on the operational needs of the company***

ABOUT US

Transit Management of Central Maryland (TMCM) d.b.a. the Regional Transportation Agency (RTA) of Central Maryland manages and operates public transportation in Anne Arundel County, Howard County, Northern Prince George’s County, and the City of Laurel. RTA employs 150 administrative and operational staff out of our Annapolis Junction location.

JOB DESCRIPTION

The RTA is actively seeking an experienced Diesel Bus Mechanic Shift Supervisor. This individual will manage the work of mechanics and supervise the maintenance for our fleet of 80 transit buses and service vehicles.

This position requires the level of knowledge and skills necessary to troubleshoot and repair automotive, transit, and commercial vehicles and equipment. Must have knowledge of and ability to use hand tools, diagnostic equipment, laptops, scan tools, gauges, micrometers etc. Shift Supervisors are required to create, monitor, update and close repair orders in the company’s management system and ensure that employees are using the system effectively. Knowledge and skills using Microsoft computer programs such as Word, Excel, and Power Point are necessary. This individual must have the ability to effectively lead, work and communicate with employees and customers, and ensure repairs and maintenance are performed in a timely and efficient manner. Requirements also include daily safety inspections, with minimal reworks, and maintaining production standards. Particular attention will be paid to timeliness and quality of repairs. Shift supervisors will also be responsible for managing and leading service lane employees.

KEY RESPONSIBILITIES, INCLUDING, BUT NOT LIMITED TO:

• 
  
• Demonstrates behaviors that are consistent with standards for professional and ethical conduct
  
• Must know how to diagnose and accurately perform all phases of vehicle repairs, in order to manage the work of those who perform these tasks:
  
  • 
    
  • Remove, clean, repair, reinstall and adjust vehicle components:
    
    • 
      
    • Engine repair and diagnosis
      
    • Engine emission components (State certification)
      
    • Driveline components
      
    • Electrical/ electronic components
      
    • Brakes/suspension/steering/exhaust
      
    • Cab/chassis
      
    • Hydraulic diagnosis and repair
      
    • Heating, Ventilation & Air Conditioning
      
    • Proficiency in various scan tools and laptops
      
    
    
  
  
• Ensure work orders are generated and properly completed for all work performed
  
• Select appropriate, effective course of action for repairs
  
• Evaluate completed work prior to release and road test vehicles as necessary
  
• Ensure safe use of power and hand-held tools, ensure shop safety protocols are followed, shop is clean and organized, tools/equipment are properly stowed after shift and environmental regulations are adhered to
  
• Assign, monitor and approve all work performed by the designated team
  
• Perform road calls and emergency services as necessary
  
• Move vehicles safely between lot, shop and work areas
  
• Communicate professionally with customers, team members and supervisors
  
• Actively participate and/or administer in safety or educational training as required
  
• Will be responsible for prioritizing workload and distribution of work as well as advising the proper repair procedures through clear and concise communication.
  

Minimum Qualifications:

• 
  
• Candidates must have a high school diploma, or equivalent.
  
• A/C 609 certification required.
  
• Must have a valid Commercial Driver’s License Class B or higher with Passenger (P) endorsement and no Airbrakes (L) restriction.
  
• Must have an appropriate mechanic’s tool set.
  
• Minimum of three (3) years direct automotive, heavy equipment or transit repair experience.
  
• Must have demonstrated experience monitoring and meeting PM schedules and operating automotive repair shop equipment.
  
• Must have excellent communication skills, bringing demonstrated abilities of building solid relationships with superiors, peers and subordinates.
  

Special Requirements:

• 
  
• This position requires a minimum of three (3) ASE Heavy Duty/Transit related certifications. These certifications must be obtained within the first six (6) months of employment. 60; New Shift Supervisors are strongly encouraged to obtain their Heavy Duty/Transit ASE Master certification within their first two (2) years of employment through progressive testing.
  
• Forklift certification must be achieved within one (1) year of employment.
  

Physical Requirements & Working Conditions:

• 
  
• Incumbent must be able to move about the office and between floors; utilize standard office equipment; access filing system/cabinets; and communicate effectively and efficiently in person or by telephone.
  
• Intermittent sitting, standing, stooping, crouching, walking, lifting light and heavy objects, climbing ladders/stairs/ramps or scaffolding, and using tools and equipment that require a high degree of manual dexterity.
  
• Required to sit, stand, walk, use hands and fingers, handle, feel, speak, hear, to reach with hands or arms, climb or balance, stoop, kneel, crouch or crawl, and smell. Must be able to lay on back on a mechanic’s creeper to work underneath motor vehicle equipment.
  
• Must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds with assistance.
  
• Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  
• Employee must be free of any conditions, which result in temporary loss of consciousness or ability to reason.
  
• Work is performed with exposure to noise, chemicals, noxious odors, gases, poor ventilation, inclement weather, dirt, grease, dust, and machinery with moving parts requiring use of protective devices.
  
• Must be able to acquire and maintain a Medical Examiner's Certificate (DOT card).
  
• Must be able pass pre-employment drug screening.
  
• This position is safety-sensitive and is subject to RTA's Drug and Alcohol Testing Program.
  
• Candidate is considered \"Essential Personnel.\"
  

Right to Revise:

This job description is not meant to be all-inclusive, and the company reserves the right to revise this job description as necessary without advance notice.

The duties and expectations herein are intended to describe the general nature and level of work being performed by employees. They are not to be construed, as an exhaustive list of responsibilities, duties, and skills required. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer without notice.

We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment.

Salary/Compensation: $79,500 - $83,000 per year

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

• 
  
• Grind and polish metal.
  
• Use spot welding equipment, welds appropriate parts together based on specifications.
  
• Run samples and check product quality against prints.
  
• Adjust spot welder to properly weld material based on thickness and finish.
  
• Performs all quality checks, fill out daily activity reports, and enter time recording in SAP.
  
• Change and maintain welding tips as necessary.
  
• Performs 5S & Continuous Improvement activities.
  
• Other duties as assigned.
  

• 
  
• High school diploma or GED from an accredited institution
  
• No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Sherman, TX will be considered
  
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  

• Spot-welding experience

• 
  
• Ability to lift 50 lbs. alone occasionally to frequently, and up to 100 lbs. with assistance occasionally by stooping, reaching, bending.
  
• Ability to read blueprints and use simple measuring tools.
  
• Ability to follow directions, work independently and close attention to detail.
  
• Work as part of a team having responsibility for assembling an entire product or component of a product.
  
• Ability to reach, grasp and manipulate-.
  
• Ability to work mandatory overtime, including Saturdays and up to 12 hours in a shift, as needed by the business.
  
• Ability to stand for the duration of the shift (eight to twelve hours) and perform repetitious tasks.
  

• 
  
• Set up, understand and proficiently operate all welding equipment.
  
• Troubleshoot various and appropriate machine problems.
  
• ID and tag product with shop orders.
  
• Retrieve/enter data into system.
  
• Ensure quality and proper documentation on all parts.
  
• Maintain components and supplies as required to operate efficiently.
  
• Weld components based on print specifications.
  
• Perform 5S & Continuous Improvement activities.
  
• Other duties as assigned.
  

• 
  
• High school diploma or GED from an accredited institution
  
• A minimum of one year of weld operations, to include MIG, TIG of stainless steel and/or aluminum.
  
• No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Sherman, TX will be considered.
  
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  

• 
  
• Spot-welding experience
  
• Basic computer skills.
  
• Solid math skills; analytical and reasoning skills.
  
• Able to read, interpret blueprints and use simple measuring tools.
  

• 
  
• Ability to lift 50 lbs. alone occasionally to frequently, and up to 100 lbs. with assistance occasionally by stooping, reaching, bending.
  
• Ability to work mandatory overtime, including Saturdays and up to 12 hours in a shift, as needed by the business.
  
• Ability to stand for the duration of the shift (eight to twelve hours) and perform repetitious tasks.
  
• Ability to read blueprints and use simple measuring tools.
  
• Ability to follow directions, work independently and close attention to detail.
  
• Work as part of a team having responsibility for assembling an entire product or component of a product.
  
• Ability to reach, grasp and manipulate-.
  
• Requires PPE to include safety glasses, safety-toe shoes, ear protection, cut resistant sleeves, and any other PPE required by the position.
  
• Environment exposure includes sharp objects, pinch points, oil, sparks.
  

Join our collaborative team as an Inventory Controls Supervisor where you'll coordinate warehouse operations and ensure optimal efficiency in managing critical pharmaceutical supplies. In this role, you'll oversee inventory accuracy, coordinate team activities, and maintain compliance with cGMP standards. You'll implement continuous improvement initiatives using lean methodologies while managing daily operations including receiving, warehousing, and production support activities. This position offers the opportunity to support and develop team members, implement process improvements, and contribute to our mission of enabling customers to make the world healthier, cleaner, and safer.

Work Schedule: Second Shift (Afternoons)

Environmental Conditions: Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cold Room/Freezers -22degreesF/-6degrees C, Fluctuating Temps hot/cold, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Warehouse, Will work with hazardous/toxic materials, Working at heights

Hours/Shift: Monday - Friday 2pm -11pm

**Must be flexible with reporting hours**

Requirements:

Forklift certification required (or ability to obtain) Valid driver's license Strong proficiency in warehouse management systems and Microsoft Office applications Experience with cGMP and pharmaceutical industry regulations Demonstrated leadership ability and team development skills Excellence in inventory control and cycle counting procedures Strong analytical and problem-solving capabilities Exceptional attention to detail and accuracy Proven communication skills, both written and verbal Physical ability to lift 40-75 lbs, operate material handling equipment, and work in various warehouse environments Ability to work in temperature-controlled environments including freezers and refrigerated areas Experience with DEA regulated materials handling preferred Knowledge of lean manufacturing and practical process improvement (PPI) methodologies Ability to work flexible shifts and extended hours as needed

High School Diploma or GED required.

Advanced Degree plus 3 years of experience, or plus 5 years of experience in inventory/warehouse management with supervisory experience