Adecco 3rd Shift Hours Jobs in Usa

• Read job specifications to determine machine adjustments and material requirements.
• Familiar with flat-die threaders planetary machines.
• Capable of operating machines, performing set-ups, making adjustments, performing hourly checks.
• Verifies nomenclature and specifications of purchase requests
• Collect data for SPC charts and make necessary calculations to complete and fill out all charting.
• Lift Pierce Nut stock manually, with hoist or lift truck and positions and secures Pierce Nut stock in feed mechanism.
• Verifies thread dimensions of Pierce Nuts with specifications using the audit pan to assure that non-conforming work pieces are scraped and/or saved for further analysis by the quality department.
• Setup: adjust as required, trouble shoot feed system for Pierce Nut stock entering the tapping machine, maintain maximum efficiency and up time of tapping machine.
• Fills tanks of coolant, clean machine, and work area
• Housekeeping/6S
  

• Un-airconditioned, well-ventilated manufacturing facility
  

• Must be able to lift approximately 40 lbs. from floor level to waist, and waist to floor approximately 5 times per hour
• Must be able to stand approximately 8-10 hrs./day
• Visual acuity for detailed work
• Manual dexterity
• Mechanical ability
• Able to bend, twist, and squat in sometimes awkward positions for prolonged periods of time while exerting force (pushing or pulling) on hand tools to adjust machine
• Visual acuity for detailed work
  

• Follow all safety requirements to avoid injury to self and fellow employees
• Create and maintain a safe work environment; repair and/or report non-conformances to company safety policies and guidelines
• Perform the necessary safety requirements to avoid injury to self and fellow employees
• Demonstrates safe and efficient operating skills of machine shop equipment
• Housekeeping/6S
  

• The ability to read and comprehend simple instructions, short correspondence, memos and to write simple correspondence.
• Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
• Ability to understand how to carry out instructions furnished in written, oral, or diagram form, to deal with problems involving several concrete variables in standardized situation
  

• High school diploma or general education degree (GED)
• One to three months related experience and/or training
  

• Full time position
• Regularly scheduled to work 8 – 10 hours a day
• Must be able to work Monday - Saturday

What we're looking for

• Education: High school diploma or general education degree (GED) preferred; minimum two years related experience and/or training; or equivalent combination of education and experience

• Experience - Previous experience in a manufacturing environment preferred.

• 1 - 3 years of related experience in a manufacturing facility, preferably a chemical plant.

Collaboration Tool: Microsoft Office Suite (Outlook, Excel, Word).

Preferred Qualifications:

• Experience in a chemical plant.

• MFG experience preferred.

• Understanding/familiaritywith cGMP and RCRA training.

• Strong organizational, prioritization, and problem analysis skills.

How you will thrive and create an impact

• Adheres to the company's strict safety regulations.

• Maintains a safe, clean, and organized work area, ensuring that others do the same.

• Learns and adheres to safety rules for the work area regarding the management of chemicals and equipment.

• Responsible for learning the safety hazards of processes, equipment, and materials and applying that knowledge during routine operations.

• Monitors and performs daily activities within the production area (processing/ packaging/ testing/ sampling) to ensure safety practices are being followed.

• Identifies and corrects potential hazards to ensure compliance with safety regulations.

• May assist with activities related to hazardous waste disposal, including properly identifying and classifying waste streams, ensuring segregation, and adhering to applicable regulations.

• May be responsible for devising and implementing safety improvements.

• Performs routine tasks such as cleaning, weighing, and set-up of systems for operation, packaging, and in-process testing.

• Will be trained on applicable manufacturing procedures.

• Performs routine maintenance and cleaning of production equipment to ensure its optimal operation.

• Corrects routine and non-routine problems by analyzing, troubleshooting, and correcting equipment/process problems.

• Monitor and record critical process parameters.

• Communicates with management on product testing results, trends, and deviations. Recommend process adjustments.

• Performs a wide variety of skilled duties in the preparation and operation of process equipment.

• Understand the mechanism of production machines and demonstrate the ability to identify areas of the operations process.

• Ensures packaging of finished goods meets all NuSil packaging specifications to meet customer requirements.

• Accurately uses computerized operating systems to run and monitor manufacturing equipment, if required.

• Is responsible for accurately completing and reviewing manufacturing and quality documentation, including all calculations and notes.

• May optimize and evaluate formulation levels for product workup.

• May collaborate with the Research & Development group when necessary.

• May be required to wear special garments in controlled manufacturing environments, including synthetic-material coveralls, beard covers, bouffant caps, booties, and/or powder-free vinyl gloves.

• May assist various departments with the proper collection and disposal of hazardous waste.

• May assist with the inspection/operation, and maintenance of various safety equipment and laboratory ware.

• May be required to wear special garments in controlled manufacturing environments, including synthetic-material coveralls, beard covers, bouffant caps, booties, and/or powder-free vinyl gloves.

• All employees are expected to maintain a safe work environment, obey safety rules, and exercise caution in all work activities.

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Description

Part-time Pediatric Case ( 20 hours per week) - Trach and G-Tube experience needed

As a Nurse you will be called to care when you're needed most. As part of Interim HealthCare, you'll support a full range of patient services to bring comfort and dignity to our clients.

What we offer our Nurses RNs/LPN:

* Competitive pay, benefits, and incentives.

* Truly flexible scheduling - a dedication to work/life balance (Full-time (FT), Part-time (PT), PRN)

*Daily Pay option available

* No Overtime Required

* 1:1 Patient care

Working at Interim HealthCare means a career unlike any other. With integrity at the center of all we do, we know that when we support you and your community, you'll change lives every day.

As a Nurse, you will:

* Provide in-home direct patient care according to the provider's prescribed plan of care (and nursing scope of practice) while closely monitoring progress/recovery.

* Assess and document patient conditions and report changes as needed (vitals, blood/stool/urine, glucose, etc.)

* Administer medication, insulin, and IV/fluids; documenting thoroughly.

* Inspect and care for wounds, changing dressings and assisting with personal hygiene.

* Assess patient for further injuries, infections, bedsores, etc. and deliver appropriate treatments.

* Collaborate with providers, aides, and allied health professionals to ensure exceptional patient outcomes.

To qualify for a Nurse with us, you will need:

* Education: Associate degree in Nursing (AND) or Associate of Applied Science in Nursing (AAS) required

* Licensure: Current unrestricted license to practice as a Registered Nurse (RN) in the state associated with this position

* Current CPR/AED/BLS/First Aid certification

* Reliable transportation to/from care sites and/or work locations

* Practical trach and/or ventilator experience preferred, not required

At Interim HealthCare, we know that being our best is non-negotiable - that's why we treat your family like our own. We take a patient-centric approach to address each individual's mind, body, and spirit, our caregivers work tirelessly to help their patients and families find peace. From our unmatched referral response times to our focus on quality improvement, the most beautifully complicated time of your life is our life's work.

#SEIndiana1

Perform routine and non-routine cleaning tasks along with other staff on Meltblown equipment assuring their ongoing cleanliness

Ability to set-up, operate and troubleshoot and/or make proper machine adjustments to the process to produce quality product that meets and/or exceeds customer expectations

Understand and be able to do basic upkeep and troubleshooting on the following equipment:

• Meltblown machines in total including all sub-systems
• TSI Testers
• Cutters
• Presses
• Resin drying equipment
• Resin mixing equipment
• Silo and sensor for silo depth

Collaborate with and support engineering from Neillsville and Stoughton with new processes and products

Directly engage engineering and maintenance in a timely manner to assist with issues

Assist in creation of documentation for existing and new processes and procedures

Properly complete all documentation within the department including quality records, maintenance logs, production logs, 5S scores, etc as directed

Understand and apply media specifications as needed to maintain product quality.

Assist in managing scrap amounts by promptly addressing causes of scrap including involving engineering or maintenance

Calibrate machines and testing equipment per schedule and as needed, perform quality test procedures as required.

Support and maintain OE initiatives throughout designated work area

Responsible for completing weekly and monthly Preventative Maintenance on equipment.

Apply all safety, quality, ITAR, and other plant processes and procedures to the products

Keep department organized and focused to meet production demands (5S Sort, Straighten, Shine, Standardize, Sustain)

Communicate effectively with department, maintenance, engineering, plant leadership, and any other co-workers

Demonstrated ability to perform critical job functions (as outlined above) and train new employees in the department.

Other duties as assigned by the team leader or manager

Ability to follow directions, read blueprints, job data sheets, safety instructions, etc

Good written and oral communication skills

Must be a quick learner with strong problem solving skills

Must be very adaptive to change and be an active change agent

Must be motivated and self-driven, able to work with minimal supervision

1-2 years experience working in a similar position is preferred

Must be able to walk/stand at least 75% of the time including during required overtime hours.

Must be able to lift up to 35 lbs

Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training.

Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material.

Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair.

Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development.

We are deliberately working towards a brighter future. Our daily actions consider what is important to our people, our customers and our planet. We are focused on performance, durability and sustainability to serve the world better.

Job Identification 1389

Job Category Manufacturing

Locations 1401 E Division Street, Neillsville, Wisconsin, 54456, US

Job Title: Manufacturing Supervisor

Location: Waukesha, WI | 100% Onsite

Company: Prolec-GE Waukesha, Inc.

Employment Type: Full-Time 40+ hours | Long term | Permanent

About the Role

Are you passionate about driving operational excellence and leading high-performing teams? As a Manufacturing Supervisor, you will play a critical role in ensuring production goals are met while maintaining the highest standards of quality, safety, and continuous improvement. This is an exciting opportunity to lead a dynamic team, optimize processes, and make a measurable impact on our manufacturing operations.

What You’ll Do

• Lead and Inspire: Supervise and motivate your team to achieve production targets, maintain quality standards, and foster a culture of safety and accountability.
• Drive Operational Excellence: Monitor workflows, troubleshoot production challenges, and implement solutions that enhance efficiency and reduce costs.
• Champion Quality: Ensure compliance with manufacturing procedures and engineering instructions, investigate non-conformance issues, and take corrective action.
• Develop Talent: Participate in hiring, create training plans, and provide coaching and feedback to build strong, skilled teams.
• Promote Continuous Improvement: Identify opportunities for process enhancements and lead initiatives that align with plant goals.
• Ensure Safety & Compliance: Maintain a safe work environment, conduct investigations when necessary, and uphold company and union guidelines.

What We’re Looking For

• Bachelor’s degree with 3–5 years of manufacturing leadership experience (or equivalent leadership experience).
• Strong communication and problem-solving skills.

Preferred Qualifications:

• Degree in Operations Management or Engineering.
• Experience in a unionized environment.
• Background in engineered-product manufacturing.
• Proficiency in Microsoft Office.

Key Skills for Success

• Proven leadership and team-building abilities.
• Excellent interpersonal and communication skills.
• Strong analytical and decision-making capabilities.
• Commitment to safety, quality, and continuous improvement.

Why Join Us?

At Prolec-GE Waukesha, Inc., we value innovation, collaboration, and professional growth. You’ll have the opportunity to lead impactful projects, work with cross-functional teams, and contribute to a company that powers progress. We offer competitive compensation, comprehensive benefits, and a supportive environment where your ideas matter.

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

Boro Park Center is hiring a Bilingual Licensed Practical Nurse (LPN) in Brooklyn, NY.Full-Time, Part-Time, and Per Diem Shifts AvailableBase rate is $37.15 with an additional 10% shift differential for evenings and nights .Collecting required information from new Residents to be admitted.Recording health details of Residents; Administering medications and injections to Residents as needed.May be required to supervise Certified Nursing Assistants (CNAs).Helps Residents get dressed & take care of personal hygiene.Monitors Residents' food and liquid intake and output.Bilingual Mandarin/EnglishValid LPN State license.Boro Park Center for Rehabilitation and Healthcare is a 510-bed rehabilitation and Skilled Nursing Facility in the heart of the Boro Park section of Brooklyn.

Our warm and nurturing environment allows each resident to maintain his or her Rehabilitation and Healthcare, healthier, happier, and most of all, with the tools to succeed.

Our staff is committed to ensuring the highest quality of life for all our residents, by maintaining each resident's individuality.

We want all residents to leave the Boro Park Center font's dignity and independence.

Boro Park Center is a proud member of the Centers Health Care consortium.

Boro Park Center is hiring a Bilingual Licensed Practical Nurse (LPN) in Brooklyn, NY.Full-Time, Part-Time, and Per Diem Shifts AvailableBase rate is $37.15 with an additional 10% shift differential for evenings and nights .Collecting required information from new Residents to be admitted.Recording health details of Residents; Administering medications and injections to Residents as needed.May be required to supervise Certified Nursing Assistants (CNAs).Helps Residents get dressed & take care of personal hygiene.Monitors Residents' food and liquid intake and output.Bilingual Mandarin/EnglishValid LPN State license.Boro Park Center for Rehabilitation and Healthcare is a 510-bed rehabilitation and Skilled Nursing Facility in the heart of the Boro Park section of Brooklyn.

Our warm and nurturing environment allows each resident to maintain his or her Rehabilitation and Healthcare, healthier, happier, and most of all, with the tools to succeed.

Our staff is committed to ensuring the highest quality of life for all our residents, by maintaining each resident's individuality.

We want all residents to leave the Boro Park Center font's dignity and independence.

Boro Park Center is a proud member of the Centers Health Care consortium.

Oneida Center is hiring a Licensed Practical Nurse (LPN) to work Weekends in Utica, NY.Full-Time $5,000 Sign-on Bonus!!!Part-Time $2,500 Sign-on Bonus!!!

Earn between $30.50
- $32.25 based on experience! With an additional $1.00 shift differental for evenings and nights!Oneida Center benefits include:Tuition Reimbursement Program!Generous pay rates based on experienceExtra evening and night shift differentialsCareer Advancement OpportunitiesTwo-Tiered Insurance Plan: Medical and Dental!DUTIES:Collecting required information from new Residents to be admitted.Recording health details of Residents; including vitals & temperature.Administering medications and injections to Residents as needed.Treating and dressing wounds and bedsores as needed.May be required to supervise Certified Nursing Assistants (CNAs).Helps Residents get dressed & take care of personal hygiene.Monitors Residents' food and liquid intake and output.REQUIREMENTS:Must be able to work as a team member.Valid LPN State license.Must be in good standing with State Registry.