Active And Passive Electronic Components Examples Jobs in Usa

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Nemak is a leading provider of innovative lightweighting solutions for the global automotive industry, specializing in the development and manufacturing of aluminum components for e-mobility, structure & chassis, and ICE powertrain applications.

We are currently hiring an Electrical Maintenance Technician at the Dickson, TN location.

Possible shifts are as follows:

• 11:00 p.m. - 7:00 a.m.
• 3:00 p.m. - 11:00 p.m.
• 7:00 p.m. - 7:00 a.m.

Maintenance Technician Responsibilities/Daily Duties:

• Strong focus on troubleshooting PLCs, robotics, conveyor systems, pneumatics, and motor drive.
• Adhere to lockout and tag procedures, prioritizing safety at all times
• Perform machinery repairs using a variety of tools
• Clean and lubricate machinery parts as needed
• Perform adjustments, tightening, and repairs during production breaks and work stoppages whenever possible
• Proactively monitor your area for issues and take initiative in preparing for and executing repairs problems
• Provide improvement suggestions to the area supervisor and shift engineers
• Rebuild parts and pre-stage repetitive usage items in the maintenance area
• Maintain small repetitive usage tools and rigging equipment in the maintenance area
• Proactively address pneumatic, hydraulic leaks and safety-related issues
• Communicate emergency and planned work order data promptly to maintenance supervisor or shift lead technician
• Conduct informal shift changeovers and provide relief on machines as needed
• Participate in Total Productive Maintenance (TPM) exercises, closely collaborating and supporting production operations
• Inspect, diagnose, and troubleshoot mechanical issues in hydraulic and pneumatic systems
• Install, assemble, and test machinery and equipment
• Perform routine preventive maintenance checks, inspections, and servicing on all equipment to ensure safe operations and to identify potential malfunctions in machines
• Perform repairs, replacements, and various mechanical, electrical, hydraulic, pneumatic, and welding tasks associated with various maintenance tasks
• Conduct electrical troubleshooting, machine rebuilds, and component overhauls, including dismantling, inspection, repair, or replacement of parts
• Assemble, install, or repair wiring, electrical/electronic components, pipe systems, plumbing, machinery, and equipment
• Utilize forklifts, scissor lifts, and JLG lifts as required
• Possess proficiency in installing, repairing, and maintaining equipment throughout the manufacturing process
• Preform all additional tasks assigned by the supervisor or other member of management

Preferred Knowledge and Abilities:

• Ability to read hydraulic, pneumatic, electrical, electronic schematics, and ladder diagrams
• Ability to troubleshoot and repair hydraulic, pneumatic, and electrical control systems
• Ability to interpret and troubleshoot electrical and motor controls circuits
• Knowledge of electrical machinery control, including the ability to interpret logic and program programmable controllers
• Maintenance experience ranging from two to five years
• Experience in both power distribution and hard-wire control techniques

Requirements/Qualifications:

• High School Diploma or GED
• Two (2) years of industrial maintenance experience and/or a two year technical degree/certification required
• Allen-Bradley PLC programming certification preferred
• Prior experience in an automotive manufacturing environment preferred
• Advanced mechanical knowledge of conveyors, rollers, fabrication and welding
• Advance knowledge and proven experience in PLC programing and troubleshooting
• Proficient in programming using ladder logic and HMI interfaces
• Prior experience in an automotive manufacturing environment preferred
• Successful completion of appropriate skills test, which determines the maintenance technician level
• Availability for short-notice overtime, including weekends

Job Type: Full-time

Pay: $35.63 - $42.76 per hour

Job Summary

The Maintenance Technician I–III is responsible for performing preventive and predictive maintenance and repairing production equipment as needed. This role also supports senior technicians with electrical and mechanical projects while ensuring safe and efficient equipment operation in a manufacturing environment.

Key Responsibilities

• Perform preventive and predictive maintenance on production equipment.
• Assist senior technicians with equipment repairs while learning best practices.
• Support small electrical and mechanical projects under the direction of the Team Lead or Supervisor.
• Follow all safety policies, procedures, and regulatory requirements.
• Ensure compliance with occupational health and safety standards and recommend improvements when needed.
• Work collaboratively with production teams to support operational efficiency.
• Repair and replace electrical, hydraulic, pneumatic, and electronic components including motors, contactors, relays, timers, switches, PLCs, light curtains, motor controls, and valves.
• Diagnose and troubleshoot faults in electrical equipment and integrated systems.
• Install and repair electrical wiring, conduits, receptacles, switch boxes, cable assemblies, and lighting fixtures.
• Maintain equipment performance and assist with managing spare parts inventory.
• Support equipment installation, setup, modification, and relocation.
• Read and interpret electrical schematics, wiring diagrams, and hydraulic/pneumatic diagrams.
• Test electrical and electronic components for voltage, current, resistance, and continuity.
• Respond to equipment breakdowns and resolve issues to prevent production downtime.
• Follow Lockout/Tagout (LOTO) procedures when servicing equipment.
• Accurately complete work orders and maintenance documentation.

Qualifications

Skills

• Experience troubleshooting electrical and mechanical equipment.
• Knowledge of PLC systems, robotics, AC/DC and servo drives, motion control, HMI interfaces, and motor controls.
• Ability to read electrical, mechanical, pneumatic, and hydraulic schematics.
• Understanding of PLC programming concepts (e.g., Siemens Step 7, Beckhoff TwinCat).
• Knowledge of electrical circuitry including relays, contactors, limit switches, and proximity sensors.
• Familiarity with Computerized Maintenance Management Systems (CMMS) is a plus.

Traits

• Strong teamwork and collaboration skills.
• Mechanical aptitude and interest in technical problem-solving.
• Excellent communication and interpersonal skills.
• Detail-oriented with strong follow-through.
• Willingness to work rotating shifts.
• Ability to support and manage small technical projects.

Education & Experience

• Minimum 2 years of relevant experience with strong troubleshooting skills.

Preferred:

• Experience in a fast-paced manufacturing or industrial environment.
• Technical trade school certificate or related military training.

Unleash Your Potential with Velocity Electronics!

We are looking for a Strategic Account Manager in Austin - Texas to deliver exceptional experience and outcomes by working with a portfolio of key customer accounts to facilitate sustainable and long-term businesses.

Key Responsibilities:

• Cultivate and maintain strategic customer relationships
• Sell a portfolio of key accounts
• Assist in the implementation of global sales and purchasing strategies
• Develop and maintain a deep understanding of the structure, culture, and needs of key customers
• Manage and facilitate own individual training, including sales, sourcing, and throughput
• Ensure customer requirements are accurately entered in Velocity's ERP system
• Consistently deliver on monthly and quarterly gross profit sales goals
• Represent and communicate Velocity's culture, values, and value proposition
• Provide immediate and reliable solutions to customer needs
• Complete detailed records of all sales data regarding contracts, quotations, and other customer interactions and annotate all customer touches in Velocity's ERP system
• Create and present periodic reports detailing customer interactions and sales/gross profit totals

Qualifications:

• High school diploma or equivalent; bachelor's degree preferred.
• 2+ years of experience in sales or business development (Preferably within the electronic components industry but not required)
• Demonstrated expertise in sourcing, product knowledge, account management, CRM
• Computer literate: experience with complex ERP systems preferred

Why Join Us:

At Velocity Electronics, our core valuesBe Amazing Today, Demonstrate Mutual Respect and Trust, Act Courageously, and Own Your Outcomesdrive our success. Are you someone who thrives in a fast-paced environment and is driven to exceed goals? At Velocity, you'll be empowered to take ownership of your success, build meaningful relationships, and drive growth through innovative solutions.

Join a top independent electronic components distributor serving the world's leading contract manufacturers and OEMs!

This is an onsite position reporting to our Global Headquarters in Austin, Texas.

About us

Sol-Ark is a Veteran-owned solar and battery-based technology manufacturer based in Texas. Our mission is making the most reliable, innovative, and affordable solar storage solutions to power families & their businesses. Founded in 2013, the company has experienced massive, organic growth due to our equipment being 3x more powerful and capable than best-in-class alternatives. It is a fast-paced, yet casual work environment. We are a close-knit team looking to make significant contributions to a very fast-growing industry that values merit, character, aptitude, sustainability and self-reliance.

Job Description

Location: This position will be based in our corporate headquarters in Allen, Texas (Dallas-Fort Worth area)

Please use this link to apply directly to Careers Page: are seeking a detail-oriented and proactive Shift Manufacturing Supervisor – Afternoon Shift to join our team, to oversee our mechanical electronic assembly operations. The ideal candidate will be responsible for managing daily production activities, ensuring adherence to quality standards, and leading a team of assembly technicians to meet production goals efficiently.

Responsibilities:

• Supervision and Leadership: Manage and mentor a team of assembly associates, technicians, or any other assigned personnel, providing guidance, training, and performance evaluations to ensure a skilled and motivated workforce.
• Production Management: Oversee the assembly of mechanical and electronic components, ensuring production schedules are met and products comply with quality specifications.
• Workflow Optimization: Develop and implement efficient workflow processes, monitor production metrics, and identify areas for improvement to enhance productivity and reduce costs.
• Quality Assurance: Establish and enforce quality control standards according to the quality management system (QMS), conduct regular inspections, and collaborate with the quality assurance team to address any issues promptly.
• Safety Compliance: Ensure all assembly operations adhere to company safety policies and regulatory requirements, promoting a culture of safety awareness among staff.
• Resource Coordination: Manage inventory levels of assembly materials, coordinate with the procurement team for timely replenishment, and ensure optimal utilization of resources.
• Reporting: Prepare and present regular reports on production performance, quality metrics, and other relevant data to senior management.

Requirements

• Education: High school diploma or equivalent required; a Bachelor’s degree in Industrial Engineering, Manufacturing Technology, or a related field is preferred.
• Experience: Minimum of 3 years of supervisory experience in a manufacturing environment, specifically in mechanical and electronic assembly.
• Technical Proficiency: Strong understanding of assembly equipment, tools, and processes, with the ability to read and interpret technical drawings and schematics.
• Leadership Skills: Proven ability to lead and develop a team, with excellent communication and interpersonal skills.
• Problem-Solving: Demonstrated aptitude for identifying operational issues and implementing effective solutions promptly.
• Organizational Abilities: Strong organizational and time-management skills, with the capacity to manage multiple priorities in a fast-paced environment.
• Software Knowledge: Proficiency in Microsoft Office Suite; experience with manufacturing software systems (e.g., SAP, NetSuite, Oracle) is a plus.

Salary and Benefits: We offer a competitive salary and performance-based bonus program, top-tier benefits package, including medical, dental, and vision insurance, 401(k), and paid time off.

• 
  
• Generating Authorized Release Certificates (ARC) for multiple regulatory civil aviation authorities or Certificates of Conformance for military customers
  
• Issuing scrap certificates
  
• Conducting final inspections on electronic components, subassemblies, and processes
  
• Ensuring no defects in assembly, soldering, bonding, or finish
  
• Examining for specified characteristics (smoothness and centering of holes) or defects (scratches and chips)
  
• Performing unit shakedown to check for foreign objects and loose internal hardware.
  
• Marking defects and removing rejects, setting them aside for repair
  
• Reading and interpreting technical data such as service bulletins, component maintenance manuals, or engineering prints.
  
• Ensuring appropriate record keeping.
  
• Reviewing work order documentation for accuracy and completeness, ensuring adherence to specifications and conformance to company standards and customers' requirements.
  
• Effectively interacting with team members and support staff as well as external customers when applicable (source inspection, external approvals, etc.)
  
• 1st Shift: Monday to Friday, 8am to 4:30pm
  

• 
  
• You may occasionally need to provide weekend and holiday support to meet customer needs.
  
• In your role, you will be exposed to:
  
  • 
    
  • Products of various weights and sizes
    
  • Equipment with moving parts
    
  • Chemicals that may emit fumes
    
  
  
  
• To minimize safety risk to you and product, you must wear static-control and personal protective equipment.
  

• 
  
• Due to the nature of our work, you will need to be able to perform the following functions, with or without reasonable accommodation
  
• Distinguishing colors and meeting vision requirements
  
• Bending, stooping, reaching, turning as needed to place units in test stands, pick up totes, place units on rack, etc.
  
• Using hands for extended periods of time to perform testing and troubleshooting tasks (e.g. grasping, holding, picking, placing, twisting, fine manipulation)
  
• Must be able to work in a standing position up to 8 hours per day
  
• Must be able to lift up to 40 lbs
  
• Transporting product with or without product carts
  

• 
  
• HS diploma with a minimum of 2 years of relevant experience. In the absence of a HS diploma or GED, 4 years of relevant experience is required
  
• Familiarity with principles of Quality & Aerospace
  

• 
  
• Experience with FAA 8130 creation
  
• Experience working with SAP or any other ERP system
  
• Experience working with blueprints and/or technical drawings
  
• Solder experience
  
• Prior experience with component level troubleshooting
  
• A&P License
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel approximately 75% or more
  
• Must be US citizen
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
  

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel approximately 50% or more
  

• 
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
  

A Critical Systems Technician I, Connected is responsible for delivery of materials, unloading and loading materials from trucks, buildings and other containment structures, ability to transport/move job material throughout customer facilities, assist with job prep, startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems. A clean driving record is required for this role.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Following instructions from Supervisors/Lead Technicians.
  
• Be able to unload and load batteries onto pallets/moving carts
  
• Package/prepare pallets of batteries for DOT compliant travel to jobs and scrap yards
  
• Ability and willingness to travel to job sites, do overnight travel, and work nights and weekends, as needed.
  
• Learntosafely operateequipment including but not limited to:
  
  • 
    
  • Company vans, trucks, stake body truck, and box truck.
    
  • Manual pallet jacks.
    
  • Electric pallet jacks.
    
  • Moving Carts/Dollies
    
  • Forklift.
    
  • Battery lifting tables.
    
  • Pallet shrink wrapping and banding equipment.
    
  • Electric drills/drivers.
    
  • Torque wrench.
    
  • Hand tools.
    
  • AlberCellcorder, Fluke BT521, Megger and Digital Hydrometerfor battery testing.
    
  
  
  

• 
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel 30% or more
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

QUALIFICATIONS:

Education/Experience:

• 
  
• High School Diploma
  
• Clean driving records a must.
  
• Requires basic mechanical aptitude
  
• Elementary fix/repair techniques based on directed supervision.
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry.
  

Computer Skills:

• 
  
• Knowledge of Microsoft Office including: Word, Excel.
  

Certificates and Licenses:

• 
  
• OSHA 10-hour certification
  
• Must have or ability to obtain certification in DOT, First-Aid, CPR, Adult AED
  
• Pass NFPA-70E Safety training
  

Supervisory Responsibilities:

• 
  
• No supervisory responsibilities
  

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 100 pounds on a regular basis.
  

The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1