Ace Controls Llc Jobs in Usa

Job Summary

Electrical Controls Engineers at client design, program, implement, troubleshoot, and improve our electronic control systems to better automate, control, and monitor our production processes. The Electrical Controls Engineer applies comprehensive electrical engineering skills and industry experience in support of the design, fabrication, and implementation of new equipment. They need to be proficient in a variety of logic control hardware, HMI’s and programming software, as well as the associated sensors, vision systems, motors, drives, actuators, and industrial communication networks. They are responsible for writing, troubleshooting, and modifying our ladder logic programs that control the way our equipment operates. They further provide expert-level troubleshooting support on existing automated equipment as a backstop for our maintenance technicians. Depending on the complexity of the equipment needed, they may additionally serve as the project lead for an entire piece of automated equipment, and thus may also coordinate activities for internal mechanical designers and/or external contractors to deliver a turn-key piece of production equipment.

Primary Responsibilities

• Design and program new and/or upgraded control systems for our manufacturing equipment to be used on both new and existing products.
• Provide tier 3 troubleshooting support to maintenance technicians on particularly difficult equipment problems.
• Define and document requirements for new control systems and control system upgrades.
• Mock-up prototype equipment and control systems in order to evaluate the ability of designs to achieve their intended purpose.
• Prepare design review documentation to facilitate peer and leadership review
• Document control systems using control schematics, electrical diagrams, panel layouts, and through meticulous software program comments.
• Develop and perform system verification and validation tests to ensure safe and proper functioning.
• Provide guidance, mentoring, and assistance to peers and junior engineers and technicians.
• Coordinate with Program Managers, R&D, Engineering and Management to prepare detailed plans and estimates for equipment in support of capital expenditure requests.
• Prepares statements of work and compile cost estimates for new control equipment
• Assists with make/buy decisions and oversee the design and build process for outsourced systems.
• Stays informed concerning new technologies, materials and equipment, and investigates potential applications.
• Maintain the highest ethical standards, even when challenged from above.
• Understand and live by Armtec’s ethics and business conduct policies.

Education & Professional Work Experience Requirements

• Must be authorized to work in the U.S.
• To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government.
• QualificationsBachelor’s degree in an engineering discipline with 5+ years of controls engineering experience required.
• Demonstrated experience in designing and deploying automated control systems in a manufacturing environment.
• Ladder Logic programming experience using RSLogix 500, and Studio 5000
• HMI development experience, prefer experience with FactoryTalk View Studio
• Demonstrated ability to troubleshoot AC/DC electrical equipment problems and perform system tests.
• Experience with creating electrical schematics and control system diagrams. Autocad Electrical experience is preferred.
• Prefer experience implementing Allen Bradley Micrologix, and CompactLogix PLC’s and various touchscreen HMI panels, such as Panelview and C-more HMI’s.
• Additional experience with various Industrial networks is a plus.
• Additional experience with Cognex Vision inspection system and experience with various servo drive/controllers is a plus

Direct Hire Opportunity!

Senior Automation & Controls Engineer - Food & Beverage Qualifications:

• Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience
• EPC project and Automation 7 Controls experience preferred
• Master Degree in Electrical Engineering and 6 years electrical engineering experience
• EPC project experience preferred
• Expert knowledge in standard engineering techniques and procedures
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite)
• Excellent written and verbal communication skills
• Experience with leading the discipline design for large projects and delegating work tasks to team members
• Ability to lead execution of work and resolve issues in a team environment
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills
• Ability to perform quality reviews for detailed engineering documents and specifications
• Ability to travel. accredited program
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred
• This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment
• Must be capable of devising new approaches to problems encountered
• Ability to perform quality reviews for detailed engineering documents and specifications
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS)
• Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus
• Experience with PlantPAX and PackML is preferred
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired

Senior Automation & Controls Engineer - Food & Beverage Description:

• Responsible for compliance with company and project site safety policies
• Design responsibility for all Automation and Controls scope on the project
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization
• Responsible for commissioning and startup of those design deliverables
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs)
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project
• Develop and manage verification of design, calculations, project studies and report preparation
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry
• Interfaces directly with construction personnel in development of contracts and execution of work
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress
• Works with clients and vendors directly in developing design
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities
• Responsible for ensuring customer satisfaction goals and expectations are met
• Has a list of clients that frequently request them for projects or assistance
• Provides leadership, technical direction and development to Automation and Controls team members
• Assists in the day-to-day allocation of resources to their projects
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities
• Responsible for developing and submitting discipline change notices as needed to the project management team
• Fully understands and can execute the EPC project approach
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%)
• Work with our business development team to identify and develop key project and customer pursuits
• Frequently attends and hosts client events
• Develops business strategies for future projects
• Understands business needs and profitability factors
• Reviews and develops engineering hour estimates and proposals for all phases of the project
• Supports interviewing and hiring process for new team members
• Coordinates workload with Automation and Controls Department Manager
• Complies with all company policies and standards
• All other duties as assigned

Why Work With Us:

We offer a best-in-class work environment for our team, supporting their professional growth while providing a challenging, exciting, and safe workplace. From offering a robust benefits package to generous annual performance bonuses, PTO, and more, we live our core values—teamwork, resiliency, and integrity—reflecting our long-term commitment to our employees, communities, and the environment.

Position Overview:

We are seeking a Process Control Technician Specialist to provide hands-on support for the process control systems that drive our metal, alloy, and component-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems.The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment.

Essential Duties:

• Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults.
• Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations.
• Respond to process control-related issues as part of an on-call rotation,including after-hours support as needed.
• Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols.
• Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance.
• Document and report system issues,maintenance actions, and resolution outcomes to engineering leadership.
• Perform routine inspections of process control equipment to identify and report wear,potential failure points, or improvement opportunities.
• Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime.
• Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices.
• Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems.
• Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal.
• Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities.
• Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements.
• Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications.
• Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications.
• Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations.
• Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities.

Basic Qualifications:

• Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field.
• 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment.
• Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics.
• Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms.
• Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP.
• Comfortable working in an industrial environment with chemical,mechanical, and thermal processes.
• Experience using diagnostic tools such as multimeters, loop calibrators, and signal simulators.

Desired Qualities:

• 5+ years of process control or automation experience in a manufacturing setting.
• Proactive, self-motivated, and comfortable taking ownership of process control-related issues.
• Strong troubleshooting skills with an analytical approach to solving electrical/control problems.
• Familiarity with robotics, vision systems, or motion control technologies is a plus.
• Comfortable balancing multiple priorities and adapting to dynamic production demands.
• Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred).
• Knowledge of SCADA systems and virtualized environments is a plus.
• Excellent verbal and written communication skills; able to clearly document work and collaborate across departments.
• Advanced proficiency in Microsoft Office tools, especially Excel and Outlook.

Job Description:

Supports the design and implementation of controls-based solutions for novel future processing equipment, specifically fiber making and cable process equipment, in the optical waveguide and cabling manufacturing processes. These controls solutions will enable manufacturing systems to deliver and transform raw materials to product, convey ware between discrete processing steps, and/or measure and characterize ware created and/or processed by these novel manufacturing methods.

Day to Day Responsibilities:

· Integrate field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems based the system design package enabling a fully functional equipment platform.

· Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences.

· Implement specified field devices to accomplish desired process / equipment functions, and compatible / compliant with site standards.

· Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline.

· Participate in engineering project teams that are responsible to deliver robust, cost-effective automation and process machine systems to Company's manufacturing plants and processes.

· Work within project teams to support the solving of difficult automation problems, resolution of project related issues, and development of fundamental understanding of technical / process requirements critical to system success.

· Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements.

· Interface with external system integrators and machine builders to enable project deliverables.

· Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer.

· Report to project leader on assigned project activities on a pre-determined basis.

Required Education: * Two-year technical degree

Required Years and Area of Experience: * 3+ years equipment/controls experience

Required Skills:

· Experience integrating field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems into an overall controls package enabling a fully functional equipment platform.

· Experience with PID control loop tuning and techniques.

· Experience working closely with IT & process engineers to implement control sequence logic (both time-based and event-based), fail-safe states and process / equipment recovery sequences.

· Experience with graphical user interface and human machine interface.

· Experience working within engineering project teams.

· Accurately estimates timeframe to complete assigned project work, once scope of work is adequately defined, then completes work to agreed-to timeline.

· Understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration.

· Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment.

· Familiar with state-of-the-art technologies in the following areas: control systems integration, controls architectures, PLC's, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems.

· Ability to work in a team-based environment and lead or participate on a highly matrixed team.

· Possesses an understanding of general mechanics and ability to apply that understanding during troubleshooting and system implementation.

· Sound problem solving and decision-making skills.

· Highly motivated, results oriented, customer focused, with a high commitment level.

· Must be able to program in ladder logic or equivalent.

· Experienced in the checkout and verification of electrical control panels.

Desired Skills:

· Experience preferred with Allen-Bradley, Beckhoff, LabVIEW, Safety PLCs, iFIX SCADA.

· Manufacturing experience and ability to work in a manufacturing environment.

· Computer vision system experience.

· Experience with programming manufacturing systems using higher level programming languages: o C++ or C# o VB or VB.Net

· Robot programming skills.

· Sound knowledge of the rules and regulation relating to implementation and best practices in electrical system design and implementation: o National Electric Code o NFPA 79 Specification o NFPA 70e Specification o ANSI and IEC electrical symbols o Grounding and shielding of electrical systems

· Able to work with external machine builders and system integrators for build, and integration of later stages of system implementation.

Soft Skills:

· Works well in a team environment.

· Acts and makes decisions in the best interest of project team.

· Complies with all policies and procedures of project team.

· Strong written and verbal communications and overall people skills.

· Resolve conflicts with peers, customers, etc.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

At Ride Engineering, it is our responsibility to move people through our stories in magical ways that bring these experiences to life! Ride Engineers bring optimism and solutions to design challenges that often seem impossible and partner with diverse creative talent to define and build one-of-a-kind experiences that bring fun and joy to millions of people all around the world. We Create to Inspire!

The Ride Control Systems Engineer will report to the Executive Ride Control Systems Engineer.

This is a full time role.

What You Will Do:

• Manage entire scope to conceive, design, & deliver control systems for a wide variety of complex and innovative ride systems and related equipment
• Conduct systems engineering for ride control systems
• Define system use cases and user needs
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Ensure compliance with control system safety standards
• Perform engineering design and analysis for ride control systems
• Develop control strategies and algorithms
• Research new products, technologies, and methodologies
• Design, model, and analyze control systems, data communication, and dynamic systems
• Collaborate with other design and engineering professionals to implement ride control systems
• Develop implementation plans and budgets
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents, and lead testing efforts

Required Qualifications & Skills

• 5+ years experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Experience with requirements management, test plans/procedures, and test execution
• Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Solid skills in technical document writing
• Ability to travel domestically and internationally for 1-week to 3-year durations
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Proficient with engineering design tools, including AutoCAD, Matlab, Simulink, Solidworks
• Proficient in Rockwell and Siemens automation systems architecture and components
• Expertise in motor and motion control methods and components
• Knowledge of pneumatic controls and devices
• Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at DXMedia
  
  The hiring range for this position in California is $123,300 to $200,300 per year. The base pay actually offered will take into account internal equity and also may vary
  depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?

As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe.  Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!

You will report to the Ride Controls Systems Engineering Executive

This is a full time role.

What You Will Do:

• Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
• Perform engineering design and analysis for ride system networks, with focus on automation system architecture
• Design and test cyber security solutions and network architectures for ride systems
• Design, model, and analyze data network communication systems
• Research and test new products, technologies, and methodologies and conduct trade-off studies
• Prepare and propose new cyber security and network architecture concepts and standards
• Lead standards and policies development for ride control network and cyber security architectures
• Collaborate with and support project teams on network requirements, implementation, and issues
• Collaborate with attraction development teams to design and deliver ride networks
• Develop and analyze OT network performance requirements for high availability real-time system
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Develop implementation plans and budgets for ride control network systems
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents and conduct ride network installation/commissioning efforts

Required Qualifications & Skills

• At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
• At least 3 years of experience in network systems design, installation and configuration
• At least 3 years of experience with Linux and Windows system administration experience
• Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
• Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
• Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
• Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
• Demonstrated experience evaluating and remediating network and system vulnerabilities
• Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
• Solid skills in technical document writing
• Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
• Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems

Preferred Qualifications and Skills

• Proficient in Rockwell and/or Siemens automation systems architecture and components
• Experienced in fail-safe and safety-related system design and analysis
• Experience with multitasking software platforms and design approaches
• Experience with wired and wireless network design and configuration
• Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
• Knowledge of software configuration management/version control tools
• Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXmedia

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115