Ace Controls Jobs in Usa

Machine Vision / Controls Engineer

Do you enjoy:

• Working on new automation challenges every few months
• Performing vision feasibility testing and proving out inspection methods
• Researching and implementing new automation technologies
• Managing your work with a high level of autonomy
• A blend of desk work (~70%), shop work (~20%), and field work (~10%)
• Working in a small engineering-driven company where your work has visible impact

Job Description:

We are looking for a Machine Vision / Controls Engineer to join our fast-paced automation engineering firm. This role focuses on developing machine vision inspection systems while also supporting controls development and feasibility testing for custom automation equipment.

You will perform vision feasibility studies, camera/lens/lighting selection, and vision programming, primarily using Keyence Machine Vision systems. In addition, you will support PLC programming, system integration, and automation debugging on our custom machines.

This position works closely with mechanical, electrical, and controls engineers to integrate machine vision, robotics, motion control, and PLC systems into complete automation solutions.

Engineered Vision is dedicated to improving how factory automation projects are implemented through transparency, quality, and speed.

Duties:

• Perform machine vision feasibility testing in our lab to validate inspection concepts and system performance
• Size and select cameras, lenses, and lighting for vision inspection applications
• Develop and program machine vision systems (primarily Keyence)
• Integrate vision systems with robots, PLCs, and motion control systems
• Program and support PLC controls systems (primarily Allen Bradley ladder logic)
• Assist with controls debugging and automation system integration
• Support machine builds, testing, and troubleshooting in the shop
• Assist with system commissioning and startup at customer facilities
• Create and maintain vision documentation, feasibility reports, and technical documentation
• Collaborate with mechanical and electrical engineers to optimize inspection and automation performance
• Deploy systems at customer facilities and perform service work
• Travel up to 15% (mostly within 250 miles of Columbus, Ohio)

Required Qualifications:

• US Citizenship Required (we work on Government Projects – Green Card will not be acceptable)
• Must live in the Columbus, Ohio area
• Bachelor of Science in Electrical Engineering, Computer Engineering, Mechanical Engineering, Mechatronics, or related field
• Experience performing machine vision feasibility testing and inspection development
• 2+ years experience working in industrial automation including: selecting vision cameras/lenses/lights, feasibility testing, and vision programing
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments
• Strong documentation and communication skills

Preferred Qualifications:

• 5+ years experience working in industrial automation selecting vision cameras, lenses, and lighting
• 2+ years experience with machine vision programming of Keyence Machine Vision Cameras
• 2+ years experience working with a custom machine builder as a controls engineer
• Experience integrating vision with robots and PLC systems
• Experience with industrial lighting design and lens selection
• Customer run-off and field troubleshooting experience
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments

About Us:

Engineered Vision is a small custom machine builder focused on newer technologies including robots, machine vision, and motion control. We opened our doors to deliver affordable automation fast, with typical project sizes ranging from $100k–$2MM.

Engineered Vision is one of the fastest growing custom machine design and engineering firms in Columbus, Ohio. We integrate our machines across industry boundaries and pair the latest technologies with real industry needs to deliver strong ROI.

We consider our shop an engineer’s playground with robots, machine vision systems, CNC machining, and 3D printing.

We look forward to working with you.

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Schedule: Full-Time

Work Location: In person

Project Controls Engineer 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $91/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor’s degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Flight Controls Engineer at Reliable Robotics, you will be part of the Guidance, Navigation, and Control (GNC) Team. You will design, implement, integrate, and test flight control laws for all phases of operation including autotaxi, auto-takeoff, autoland, and automatic rollout. You integrate real-world hardware and C/C++ flight software as part of ongoing flight test programs, and perform simulation analysis and data reduction in our Python and C/C++ modeling & simulation environment.

Responsibilities

• Establish autoflight and flight control system requirements

• Interface with Pilots and Operations team to develop flight test plans, respond to squawks, and communicate design updates

• Design and analyze flight control laws from conceptual design through implementation and certification

• Develop simulation models to evaluate flight control system performance and stability

• Implement control laws and algorithms in flight software

• Test flight software in simulation, Monte Carlo, hardware-in-loop, and flight

Basic Success Criteria

• BS in aerospace engineering, robotics, or equivalent field

• 3+ years of hands on, professional experience developing and testing flight controls algorithms

• Experience with flight dynamics simulation and model identification

• Professional experience with developing C/C++ flight software and Python data reduction & analysis

• Excellent written and verbal communication skills

Preferred Criteria

• MS in aerospace engineering, robotics, or similar advanced degree

• Current pilot, instrument or commercial ratings

• Experience with flight controls, autopilot, or flight management system certification

We are developing and building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the entire team, you will be making key contributions to the autoflight system that drive our core company mission forward.

This position is based at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $155K - $215K

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

The Broward County Board of County Commissioners is seeking qualified candidates for Mosquito Control Inspector(Highway & Bridge Maintenance Division).
THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.


The Mosquito Control Inspector for the Highway and Bridge Maintenance Division is an hourly position that engages in routine field inspection work in the control and extermination of mosquitoes. Incumbent is responsible for mosquito control and surveillance activities to aid the County's larvicide and adulticide programs.
Work involves responsibility for making inspections of suspected mosquito breeding places in residential and rural areas. Work follows established routines with specific instructions received from superiors on all new assignments. Work includes collecting and identifying mosquito species in the field, recording all daily activities, updates data, and reports mosquito problems to supervisor as needed in a timely manner. Incumbent utilizes appropriate control method(s), applies the control method(s) in accordance with the applicable laws and Broward County policy. Work is reviewed by the incidence of public complaints against mosquito nuisance and field inspections by supervisors. This position involves routine and frequent exposure to toxic/caustic chemicals. The ability to wear an appropriately-fitted respirator mask and other personal protective equipment are requirements for this position.
***This position requires availability to work night-time, daytime and weekends as needed with notification to changes in schedule sometimes being provided with less than 24 hours' notice***

General Description
Routine field inspection work in the control and extermination of mosquitoes.
Works under close to general supervision according to set procedures, but determines how or when to complete tasks.
Minimum Education and Experience Requirements
Requires six (6) months in handling pesticide and some knowledge of public health pest control or closely related experience.
Special Certifications and LicensesPublic Health Applicators License issued by State of Florida must be obtained within six (6) months of employment.

Must possess and maintain a valid Florida Class E Driver's License for duration of appointment.

Preferences

• Associates degree or higher in Biology, Entomology or related field
• Training certification in mosquito biology and control techniques
• Class A or B valid Florida Commercial Driver's License
• FAA Part 107 Certificate (Drone Pilot License)
• 1+ years of experience using larvicide equipment and turbine sprayer (i.e., calibration of equipment, measuring/mixing, loading and testing of biological larvicide materials, such as Vectobac or similar products).
• 1+ years of experience with Surveillance and Testing activities (i.e., setting up traps, dip sampling, larval counts, data collection and analysis)
• 1+ years of experience working with Geographic Information Systems (GIS).
• 1+ years of experience with repair/maintenance of mosquito control equipment.
• 1+ years of experience with supporting aerial mosquito control operation.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Makes systematic daily checks of assigned area in the salt marshes during mosquito breeding periods; inspects ditches at regular intervals to determine incidence of mosquito breeding; determines breed of mosquito and the stage of the breeding process; keeps constant watch to prevent new breeding areas from developing; watches for incoming flights of adult mosquitoes.

Makes site inspections in an assigned residential area; identifies him/herself to residents; looks for containers holding water, pools, elevator shafts, sumps, and other places where mosquitoes could breed; calls undesirable situations to the attention of the occupant or owner; keeps work records of inspections made; makes count of adult mosquitoes at established stations throughout the County; drives spray truck and operates spraying machinery; operates equipment to combat early stages of mosquitoes.

Answers public complaints regarding annoyances by mosquitoes; determines the breed of mosquito involved and locates breeding places in the area; takes routine corrective measures as indicated.

Confers with superiors in the analysis of scientific and procedural problems involved and works out plans to abate or prevent the development of mosquito nuisance; assigns and supervises subordinate mosquito inspectors in various areas of the County; prepares and maintains survey maps.

Advises the public on methods and procedures to prevent mosquito breeding and to abate mosquito nuisance.

Orders, issues, and maintains adequate stock levels of supplies and equipment.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

Competencies

• Decision Quality

• Action Oriented

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Courage

• Manages Ambiguity

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.The Boeing Company is looking for Principal Guidance Navigation and Control Engineer to support the Flight Controls team in Everett, Washington .Position Overview:We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!Position Responsibilities:Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).

Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.Work Authorization:This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in electrical or computer engineering. 10+ years of experience with Guidance, Navigation, and Control engineering.

Current FAA Commercial Pilot license.Preferred Qualifications (Desired Skills/Experience):Knowledge/Experience with ARP 4754 and ARP 4761.Experience with flight controls system and component architecture.Experience in requirements development, design, analysis, and verification & validation of flight control systems.Experience using requirement management tools such as IBM Rational DOORS.Experience with manufacturing regulated and certified, safety critical components and software.

Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Principal (Level 5): $182,000 - $247,000Additional Information:All information provided will be checked and may be verified.Applications for this position will be accepted until Mar. 19, 2026Export Control Requirements:This position must meet U. S. export control compliance requirements. To meet U. S. export control compliance requirements, a "U. S. Person" as defined by 22 C. F. R. §120.62 is required. "U. S. Person" includes U. S. Citizen, U. S. National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

We are seeking an experienced Quality Control Technician with proven leadership skills and a devoted work ethic who is looking for a successful career and the opportunity to grow with The Middlesex Corporation, a rapidly growing, successful, and well-established heavy civil infrastructure company. As a Quality Control Technician, you will play a critical role in the overall leadership and successful and timely delivery of complex multimillion-dollar fast-track, complex heavy-civil, highway, and bridge projects from the pre-construction stage through project execution and completion.

Responsibilities:

• Comply with and actively promote all Safety policies and procedures, including reporting accidents, incidents, and near-misses to uphold the company's core value of "Safety first."
• Actively participate in overall day-to-day operational leadership and decision-making as the subject matter expert for all project quality management functions, including self-performed work, materials, or work performed by suppliers, vendors, subcontractors.
• Provide ongoing and regular quality control-related technical input for construction planning, interpretation of design, development of efficient construction methods, and quality control processes for execution of the work.
• Manage and schedule all required quality testing, inspections and documentation including all third-party quality control related services.
• Manage the quality processes required per contract documents, specifications, drawings, engineering calcs for work activities such as crane/hoisting lifts, temporary works, falsework, shoring, formwork, safety systems, etc.
• Provide overall leadership to ensure work is constructed in compliance and work quality is accurately documented through clear and traceable record keeping and reporting.
• Develop and implement project specific Quality Control Plan that meets company policies, project requirements and is aligned with industry standards and best practices. Perform periodic audits to verify adherence to QA/QC Management Plan.
• Develop a comprehensive working knowledge of project contract documents, (drawings and specifications, and requirements by reference, etc.
• Maintain applicable industry reference standards and facilitate project access to relevant team members.
• Develop and implement a project Quality Control orientation program to ensure project team members are familiar with the requirements of the project QC Management Plan, and conduct to relevant project specific training, relative to Quality Control roles, responsibilities, processes, and procedures.
• Contribute to interpretation and dissemination and communication of project quality control requirements to relevant, staff including field crews and craft supervision.
• Assist in document management to ensure all project documents are updated and current to reflect any changes, revisions, etc.
• Assist in the procurement, buy-out, and management of subcontractors, suppliers/vendors to ensure subcontract /vendor agreements capture required quality related scope of work.
• Prepare and submit accurate Quality Control project status project reports.
• Manage project submittal process to ensure timely receipt, review and approval of submittals and shop drawings, as-builts, and other required documentation.
• Actively participate in RFI process to ensure timely receipt, review, response close out.
• Monitor project work for any non-compliance issues and ensure corrective measures are approved, executed and closed out with documented acceptance.
• Manage project close-out including, timely management of punch list, commissioning, and transitional system operations turnover.

Qualifications:

• Four-year engineering or construction management degree or equivalent combination of technical training and relevant experience.
• Minimum of two (2) years of documented experience performing in a construction quality control management role on a heavy civil construction rail project.
• Comprehensive understanding of construction industry practices and standards, as well as experience with supervision, estimating, scheduling, budget preparation, and project status reporting.
• Experience utilizing project management software systems.
• Currently possess or can attain the NETTCP Quality Assurance Technologist and USACE Construction Quality Manager Certification.
• Heavy-Civil construction experience.

Necessary Attributes:

• Ability to adapt to different personalities and management styles to create a cohesive team environment.
• Strong interpersonal skills, fostering effective communication and collaboration.
• Ability to work efficiently within a team, maintaining high levels of productivity and teamwork.
• Self-starter with excellent verbal and written communication skills.
• Strong reliance on experience and judgment to plan and achieve goals effectively.
• Dedicated, hardworking, and committed to quality standards.
• Exceptional organizational skills and attention to detail.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security's Air Dominance division is hiring a Lead Guidance Navigation and Control (GNC) Engineer in Hazelwood, MO.

Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47.

Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers' overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.

Position Responsibilities:

• Define Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level
• Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model
• Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers
• Design flight control laws using modern linear control design techniques and tools to achieve design and performance targets
• Use advanced nonlinear analysis to assess and refine the control law design
• Perform model validation against test data to inform and improve the accuracy of the simulation environment
• Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope
• Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program
• Support flight simulations including desktop, software, and real time simulations
• Support hardware in the loop development and testing
• Support flight testing planning and execution
• Lead design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations
• Train and coach others

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 14 or more years' related work experience or an equivalent combination of technical education and experience
• 5+ years of experience with Guidance Navigation and Control engineering
• Experience using Matlab/Simulink or MatrixX to model systems

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range (Level 5): $170,850 - $231,150

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Summary:

We are seeking an experienced Senior Controls Engineer to lead and support automation and controls systems within an industrial manufacturing environment. This role is responsible for designing, programming, commissioning, and troubleshooting PLC- and HMI-based systems while partnering closely with operations, maintenance, and engineering teams to drive reliability, efficiency, and continuous improvement.

Key Responsibilities:

• Design, program, and troubleshoot PLC, HMI, and industrial control systems
• Lead controls efforts for new equipment, upgrades, and capital projects
• Support commissioning and startup of automated manufacturing systems
• Diagnose and resolve complex electrical, controls, and automation issues
• Develop and maintain control system documentation and standards
• Collaborate with operations, maintenance, and IT teams on system integration
• Mentor junior controls engineers and technicians
• Ensure compliance with safety, electrical, and manufacturing standards

Qualifications:

• Bachelor’s degree in Electrical Engineering, Controls Engineering, or related field (or equivalent experience)
• 10+ years of controls/automation experience in an industrial manufacturing environment
• Strong PLC programming experience (Allen-Bradley, Siemens, or equivalent)
• Experience with HMIs, VFDs, motion control, and industrial networks
• Proven experience leading automation projects from concept through commissioning
• Ability to troubleshoot complex systems under production pressure

Preferred Qualifications:

• Experience with robotics, vision systems, or SCADA
• Knowledge of safety PLCs and machine safety standards
• Prior experience mentoring or leading technical teams

Why Join Us:

• High-impact role with ownership over automation systems
• Stable manufacturing operation with ongoing capital investment
• Competitive compensation and benefits

BEPC Inc. provides Specialized Engineering Solutions and IT Project Management services to Fortune 500 companies in the Life Science and Technology industries. BEPC Mexico, a division of BEPC Incorporated, provides and manages consulting services for Automotive and Medical device companies throughout Mexico and around the globe.

The Senior Automation & Controls Engineer is responsible for leading the design, development, implementation, validation, and continuous improvement of automated equipment and control systems. This role combines strong technical expertise in PLC-based automation, electrical and pneumatic systems, equipment validation, and project leadership within regulated manufacturing environments, preferably in the medical device industry.

KEY RESPONSABILITIES:

• Lead and manage electrical and control system projects, ensuring alignment with scope, budget, and schedule.
• Design, develop, program, and troubleshoot PLC-based control systems (Allen-Bradley, Siemens, Keyence, Beckhoff, Schneider).
• Develop and implement HMI/SCADA applications (FactoryTalk View, Aveva Edge, Ignition, TIA Portal, etc.).
• Integrate VFDs, servo systems, motion control, robots (e.g., Mitsubishi), and machine vision systems (Cognex, Keyence, DataMan).
• Participate in the design and implementation of new automated equipment and capacity expansion projects.
• Execute and oversee Factory Acceptance Tests (FAT), User Acceptance Tests (UAT/BUAT), and internal testing activities.
• Lead and support equipment validation activities (IQ, OQ, PQ) in compliance with FDA and ISO 13485 standards.
• Ensure proper integration with Manufacturing Execution Systems (MES) and Warehouse Control Systems (WCS), when applicable.
• Generate and maintain technical documentation, including BOMs, electrical schematics, panel layouts, validation protocols, and reports.
• Perform advanced troubleshooting of electrical, pneumatic, mechanical, and control systems.
• Oversee preventive and corrective maintenance strategies to improve equipment reliability and efficiency.
• Collaborate cross-functionally with Manufacturing, Quality, R&D, Maintenance, and external stakeholders.
• Provide technical leadership, delegate tasks effectively, and mentor junior engineers and technicians.
• Support continuous improvement initiatives focused on efficiency, safety, and process optimization.
• Ensure compliance with safety and regulatory requirements in regulated manufacturing environments.

QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, Mechatronics, Automation, Mechanical Engineering, or related field.
• 7+ years of experience in industrial automation and controls engineering.
• Strong expertise in PLC programming (Allen-Bradley, Siemens; others desirable).
• Advanced knowledge of electrical controls, schematics, and pneumatic systems.
• Experience with servo systems, VFDs, motion control, and robotics integration.
• Experience in executing FAT, UAT, and equipment validation (IQ/OQ/PQ).
• Proficiency in AutoCAD / AutoCAD Electrical.
• Strong troubleshooting skills in automation and manufacturing systems.
• Ability to manage multiple concurrent projects.
• Upper-intermediate to advanced English proficiency (written and spoken).
• Availability to work on a 2–3 month fixed-term contract.
• Authorized to work in the location where the position is posted. Be a U.S. Citizen, Permanent Resident, or hold a valid TN Visa.

PREFERRED QUALIFICATIONS:

• Strong project planning, budgeting, and stakeholder communication skills.
• Experience in warehouse automation, material handling, or the post/parcel sector.
• Knowledge of networking protocols (Ethernet/IP, Profinet, Serial).
• 3+ years of experience in regulated environments (medical device preferred).
• Experience with MES/WCS integration.
• Familiarity with FDA regulations and ISO 13485.

Control Systems Laborer

Company: VolTech Precision

Travel: Project‑based

Duration: 3-month contract to hire

Overview

One of Insight Global's clients is seeking a Control Systems Laborer to support their Asphalt Control System upgrade projects. This role focuses on removing outdated control systems and installing upgraded components in industrial environments. Ideal candidates bring hands-on experience with control wiring, basic industrial electrical work, and the ability to travel to project sites. This is a hands-on, mechanical/electrical role supporting their commitment to precision, reliability, and high-quality system replacements for our asphalt plant partners.

Day to Day Responsibilities

• Remove existing control system components and install new systems
• Perform basic industrial electrical control system duties
• Identify, label, and terminate wires accurately
• Use basic hand and power tools to complete replacement tasks
• Work safely within industrial plant environments
• Follow instructions from leadership on project sequencing and system validation
• Support onsite technicians during system commissioning
• Cleaning up your working area

Required Experience & Qualifications

• 2+ years of experience in:
• Control systems Industrial electrical controls
• Control wiring in an industrial plant environment
• High School Diploma or GED
• Proficiency with basic hand and power tools
• Ability to travel to job sites in Arkansas
• Capable of lifting 50+ lbs
• Ability to crouch, kneel, and work at countertop-height control cabinets

Day-to-Day Expectations

• Physical work involving lifting and movement of equipment
• Removal and replacement of control cabinets and wiring
• Working in industrial plant environments safely
• Accurate wire labeling and termination
• Supporting upgrade tasks as directed by senior staff

Preferred Qualifications (Pluses)

• Certificate in Electrical Technology
• Prior experience with control panel components
• Familiarity with industrial safety practices

Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works!

Role Overview

Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts.

The role will be the primary lead on specification and procurement of instrumentation related to

process control, process indication, and control system infrastructure.

This role reports to Company Electrical Engineering Manager.

Responsibilities

• Assist with the design and modification of new and existing process control and instrumentation systems.

• Specify both discrete, analog, and networked control solutions.

• Prepare specifications, design-bid documentation, and construction estimates.

• Review supplier designs against licensor requirements, code requirements, and customer

requirements.

• Develop instrumentation standards to ensure selection compliance across multiple facilities.

• Develop maintenance procedures for instrumentation and control systems.

• Develop inspection plans for instrumentation and control systems.

• Develop commissioning plans for projects and system upgrades as required.

• Make recommendations for additional equipment as necessary.

• Participate in the review of Management of Changes, PHA Action Requests, Construction

Information Requests, and Change Order Requests.

• Experience in continuous process manufacturing in all the following project phases:

documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards.

• Assist with local, state, and federal permitting applications.

• Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance

Testing (FAT) as required (~10%).

• Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC

panels, RIO panels, and other control panels.

• Assist with local, state, and federal permitting applications.

Education

• BS in Electrical Engineering or extensive documented experience in lieu of engineering degree.

Experience

• 10+ years previous experience developing PLC programs, using multiple vendor hardware, for

process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal.

• 7+ years designing electrical control, motor control and heater control panels.

• 7+ years’ experience using AutoCAD Electrical.

• 7+ years of field installation / construction experience

• Strong background and understanding of P&ID drawings.

• Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment &

Electrical construction best practices.

• Previous experience with PSM-covered facilities.

• Previous experience working with Management of Change (MOC) and Continuous process

Improvement programs.

• Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU,

Profibus / Profinet, etc.

• Industrial Power distribution systems to 480 VAC.

• Exposure to Medium Voltage power distribution (4160 VAC or higher).

Knowledge, skills, and abilities

• Self-starter with strong initiative.

• Entrepreneurial spirit and attitude.

• Ability to manage multiple projects on different timelines.

• Comfortable in a fast-paced, purpose-driven, collaborative environment.

• Experience working with multiple outside engineering groups.

• Demonstrate a strong desire to learn manufacturing processes.

Must be authorized to work in the USA without the need for sponsorship now or in the future.

Role Overview

This role focuses on designing, developing, and supporting control systems for automation and robotic equipment. The engineer will contribute to both new product development and sustaining engineering efforts, working across software, electrical, and mechanical domains to deliver reliable, high‑performance motion‑control solutions.

Key Responsibilities

• Perform kinematic analysis and develop control algorithms for robotic and automated systems.
• Design, implement, and test motion‑control software for prototypes, proof‑of‑concept systems, and production equipment.
• Write and document code that drives multi‑axis motion, servo systems, and automation hardware.
• Collaborate with mechanical and electrical engineering teams to influence system architecture and improve performance related to controls.
• Select, evaluate, and interface with vendors for motion‑control components, sensors, and related hardware.
• Review and contribute to intellectual property evaluations for new concepts and technologies.
• Ensure compliance with applicable regulatory and design standards throughout the development lifecycle.
• Support sustaining engineering activities, including troubleshooting, root‑cause analysis, and system enhancements.
• Travel occasionally for system integration, testing, or vendor engagement (approximately 2–3 trips per year).

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Computer Science, or related field (Master’s preferred).
• Ten or more years of experience in robotics, automation, or electromechanical system development.
• Proficiency with Galil motion controllers
• Experience programming and configuring PLC systems.
• Strong background in DC motor control, servo systems, and motion‑control hardware.
• Hands‑on experience with programming, debugging, and troubleshooting PLC‑based automation.
• Working knowledge of regulatory standards for hardware and software development (e.g., IEC 60601, ISO 13485, ISO 14971).
• Ability to interpret mechanical drawings, electrical schematics, and system‑level documentation.

Preferred Experience

• Experience with Beckhoff programming
• Object‑oriented software development using C# or C++.
• Experience with the .NET Framework or .NET Standard.
• Understanding of UML state machines and their practical application.
• Knowledge of robotic control theory, including PID control and servo tuning.
• Cross‑platform software development experience.
• Familiarity with CAN bus networking and other industrial communication protocols.

Work Environment & Physical Requirements

• Primarily office‑based work with limited exposure to adverse environmental conditions.
• Frequent use of hands for typing, grasping, and other repetitive motions.
• Ability to sit, talk, hear, and view computer screens for extended periods.
• Ability to lift, carry, or push/pull up to 5 pounds frequently and up to 30 pounds occasionally.
• Additional physical tasks may be required depending on project needs.

Control Systems Engineer – Industrial Automation

A leading global automation and digital intelligence solutions provider is seeking a Control Systems Engineer to join its growing engineering team. This opportunity is ideal for an early-career engineer looking to build hands-on experience delivering complex process automation solutions across industries such as Oil & Gas, Petrochemicals, Utilities, and Renewable Energy.

This role offers exposure to innovative projects involving Integrated Control Systems, SCADA, wellhead automation, and industrial communications, working alongside experienced engineers in a structured project environment.

Key Responsibilities

• Design and implement hardware for industrial control systems, including Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), and Fire & Gas Systems (FGS), with a strong emphasis on Allen-Bradley platforms
• Develop and configure PLC, DCS, SCADA, PMS, and HMI applications
• Support automation solutions for wellhead facilities, including wellhead control panels, skids, and solar-powered systems (experience in this area is a plus)
• Apply industry standards and best practices throughout all phases of project execution
• Interpret and analyze technical documentation such as FRS, P&IDs, Cause & Effect diagrams, drawings, narratives, and control philosophies
• Assist with staging, system testing, and Factory Acceptance Testing (FAT) activities, including workstation setup, panel verification, I/O checks, and software functionality testing
• Support project execution from design through commissioning, including on-site activities as required

Candidate Profile

• Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or a related discipline
• 0–3 years of experience in industrial automation and control systems
• Exposure to Allen-Bradley or other major PLC/DCS platforms
• Understanding of the full project lifecycle, including software and hardware design, procurement, implementation, testing, FAT/SAT, commissioning, and handover
• Familiarity with industrial instrumentation, control philosophies, and system architectures
• Experience or interest in system testing, commissioning, and startup activities
• Proficiency with Microsoft Office (Word, Excel, PowerPoint)
• Strong communication skills and the ability to discuss and document technical concepts clearly

Why Consider This Opportunity

• Work on technically challenging automation projects across multiple industries
• Gain end-to-end project exposure in a structured engineering environment
• Collaborate with experienced automation professionals on global-scale solutions
• Build a strong foundation in process automation, control systems, and field execution

Job Description

Main Responsibilities: • Develop electrification control solutions at both component and system levels for a broad range of applications using a model‑based design approach. • Evaluate control designs through analysis, simulation, Hardware‑in‑the‑Loop (HIL) testing, laboratory testing, and field testing. • Interface with stakeholders to develop control system requirements that support vehicle electrification solutions. • Conduct electric drive and vehicle system simulations to support control system development and vehicle performance assessments.

Show Less

Additional Skills & Qualifications

What Skills You Need: • 2 or more years of experience in power electronics or control algorithm development. • Proficiency in MATLAB, Simulink, and Simscape. • Experience simulating power electronics, electric machines, and/or control systems. • Effective written and verbal communication skills (English). • Relevant academic research experience will be equally considered. What Makes You Stand Out: • Hands-on laboratory or vehicle testing experience with power electronics or electric motors. • Experience with Hardware-in-Loop testing. • Experience with auto-code generation and embedded software implementation on microcontrollers and FPGAs. • Working knowledge of version control and Agile software development • Experience with advanced research topics. • Experience with power electronics hardware or software design. • Experience with advanced control systems and techniques such as observers, model predictive control, filter design, etc. • Experience with power electronics control and electric motor control. • M.S. degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems. Education: • Minimum of a B.S. degree in Electrical Engineering, Mechanical Engineering, or Physics.

• Install and commission control systems on new and existing manufacturing equipment.
• Perform PLC and HMI program modifications to support process improvements and equipment performance.
• Analyze manufacturing processes and recommend automation-based improvements.
• Train maintenance technicians on basic PLC and controls troubleshooting.
• Collaborate with manufacturing engineers on the design and development of new tooling, equipment, and long-range engineering plans.
• Ensure adherence to company policies, quality standards, safety regulations, and OSHA requirements.
• Troubleshoot and repair controls-related production equipment issues.
• Develop and maintain technical documentation for controls systems, including operation and maintenance guides.
• Provide guidance to production and maintenance personnel on control system operations and programming.
• Perform additional duties as assigned by the supervisor.
  
  

• Bachelor’s degree in Engineering Technology, Electrical Engineering, or a related field.
• Minimum 2 years of industrial controls experience in a manufacturing environment.
• Strong communication and collaboration skills across cross-functional teams.
• Hands-on experience with:
• Allen-Bradley PLCs: ControlLogix, MicroLogix
• Allen-Bradley HMIs: PanelView Plus
• Allen-Bradley VFDs
• Troubleshooting/commissioning fieldbus networks (EtherNet/IP, DeviceNet)
• Creating/modifying electrical schematics using AutoCAD
• Industrial equipment troubleshooting and design
• Electrical panel building
  
  

• Experience with Cognex, Keyence, or similar machine vision/inspection systems
• Advanced knowledge of industrial automation best practices
• Demonstrated ability to train others in controls operation and maintenance
  
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

Salaried Day Shift- Mon-Fri

How Will You Make An Impact?Manage, control and direct all inventory control, which includes receiving, stockroom, shipping, production floor Inventory, MRB and Inventory Analysts. Provide exceptional support to customers, team members, and shareholders.What Will You Do?Recruitment and Retention:· Recruit, interview and hire Inventory Control, Stockroom, Prep and Receiving Supervisors

· Communicate criteria to recruiters for Inventory Control, Stockroom, Prep and Receiving Supervisors position candidates.· Coach Inventory Control staff in the interviewing/hiring process.· Monitor team member turnover; identify key factors that can be improved; make improvements.Employee and Team Development:· Identify individual and team strengths and development needs on an ongoing basis.· Create and/or validate training curriculum in area of responsibility.· Coach and mentor Inventory Control staff to deliver excellence to every internal and external customer.· Create and manage succession plans for Inventory Control function.Performance Management:· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.· Express pride in staff and encourage them to feel good about their accomplishments.· Perform team member evaluations professionally and on time.· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.· Coordinate activities of large teams and keep them focused in times of crises.· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.Communication:· Provide weekly communication forum for the exchange of ideas and information with the department.· Organize verbal and written ideas clearly and use an appropriate business style.· Ask questions; encourage input from staff.· Assess communication style of individual team members and adapt own communication style accordingly.FUNCTIONAL MANAGEMENT RESPONSIBILITIESBusiness Strategy and Direction:· Know and understand the campus strategic directions.· Define, develop and implement an Inventory Control strategy, which contributes to the campus strategic directions.· Develop an understanding of the Workcell business strategy as it pertains to Inventory Control.· Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.Cost Management:· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.· Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.Forecast Development and Accuracy:· Prepare timely forecasts for the department.· Compare forward forecast results to historical actual results for trend assessment and analysis.TECHNICAL MANAGEMENT RESPONSIBILITIES:· Drive continuous improvement through trend reporting analysis and metrics management.· Assess the adequacy of data gathering methods utilized by the workcells.· Assure that procedures and work instructions are efficient and not redundant.· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are "best in field."· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.· Lead by example; "walk the talk."· Facilitate any physical inventories as necessary.· Establish new measurement systems if/where possible.· Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.· Ensure 100% adherence to all company policies and procedures (i.e. Health and Safety, Quality).· Ensure all sensitive and confidential information is handled appropriately.· Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.· Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.· Ability to effectively present information to top management, public groups, and/or boards of directors· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.· Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.

How Will You Get Here?KNOWLEDGE REQUIREMENTS:· Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.· Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community· Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.· Ability to apply concepts of basic algebra and geometry.· Strong knowledge of global and regional logistics operations and industry.· Strong proficiency in determining logistics requirements to enable company's business goals and objectives with ability to devise and implement strategy to achieve targets.· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.· Strong knowledge of international direct and indirect taxes as well as global customs regimes.· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.· Strong and convincing communication skills.· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

. Proficiency use of MRP programs, preferable SAPEDUCATION & EXPERIENCE REQUIREMENTS:· Bachelor's degree preferred;· 7 years experience, including 5 years in supervisory role.· Or a combination of education, experience and/or training.

Benefits You Will Receive While Working With Jabil:

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities