Ace Control Systems Limited Jobs in Usa

• Responsible for updates, upgrades and maintenance of the following systems: Rail Operations Control System (ROCS); Predictive Arrival and Departure System (PADS), Positive Train Control (PTC) back-office systems, Traction Power Supervisory Control and Data Acquisition (SCADA) System and Rail Scheduling.
• Perform Quality Assurances and system engineering support of all back off systems including PTC office systems, Back Office Server (BOS), Rail Operations Control System (ROCS), Network Management System (NMS); Interoperable Train Control Message Server (ITCMS); Wayside Status Relay Service (WSRS), and the interfaces to all other operational systems.
• Develop, document, and maintain Standard Operating Procedures (SOPs), technical standards, and best practices for all train control and related systems to ensure consistency, safety, and regulatory compliance.
• Develop and implement training programs to upskill staff, mentoring team members at all levels on train control systems, operational procedures, and project management to strengthen technical capacity, foster skill development, and ensure succession planning. 
• Ensure Caltrain systems meet Federal Railroad Administration (FRA) mandated interoperability requirements with all tenant railroads; ensure Caltrain train control systems are compatible with Association of American Railroads (AAR) standards; follow the ITC guidelines that Caltrain must maintain ?N-2? backwards compatible software versions.
• Manage complex and large-scale train control engineering projects as the Technical Lead for Caltrain. 
• Manage the work of outside contractors and assist higher level Caltrain Directors and Executives in planning and evaluating the quantity and quality of work performed by subordinate staff.
• Supervise staff.  Hire, mentor, and take appropriate corrective and/or disciplinary action.  Ensure EEO policies and procedures are followed. Participate in selection of staff.  Coordinate staff training and professional development. Establish performance objectives. Monitor and evaluate employee performance.

• Establish and maintain work relationships with internal and external stakeholders to develop consensus on capital project work plans.
• Establish schedules and methods for providing train control system engineering design services on assigned capital projects; identify resource needs; review needs with appropriate management staff; allocate resources accordingly.
• Review and approve project schedules; assist in strategic planning; prepare status reports; coordinate project resources; communicate with all project participants on relevant issues; identify and resolve train control engineering issues.
• Provide general technical oversight of railroad train control systems.
• Perform system usage and performance analyses. 
• Support Caltrain Configuration Management (CM) Manager on configuration control, prioritize system defects and corrective actions; participate in Configuration Control Board (CCB) meetings as required.
• Direct, review, and approve the preparation of train control engineering designs, drawings, and specifications; identify and resolve technical engineering issues.
• Manage technical elements of the office systems warranty and long-term maintenance support service agreements.
• Review and approve operating manuals and procedures developed by various systems providers or vendors.
• Manage all technology refresh and software upgrades/updates and associated testing without interrupting regular railroad operations.
• Establish and lead a knowledge management framework to systematically capture, update, and share institutional knowledge through structured documentation, training programs, and knowledge transfer initiatives.
• Participate in the preparation and administration of the train control engineering program budget (Operating & Maintenance, and Capital); submit budget recommendations; monitor expenditures.
• Review consultant proposals and designs; recommend awards; conduct or participate in the pre-bid conferences prior to system contract awards.
• Perform all job duties and responsibilities in a safe manner to protect one?s self, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to:

• Bachelor?s degree in electrical/electronics, computer science, or a related field.
• Five (5) years of railroad industry experience in Train Control System and SCADA system development and maintenance.
• Two (2) years supervisory experience

• Knowledge and experience with AIMCore Product/Software a plus.
• Possesses a broad interdisciplinary knowledge of supervisory train control, wayside signal, highway crossing warning system, predictive and arrival system, traffic signal control, traction power substations and distribution, SCADA, server systems, virtualized server architectures, databases, cloud server systems, networking, etc.
• Knowledge of operating systems (UNIX, Linux, Microsoft)
• Knowledge of VHF and UHF radio voice and data communications, information assurance, data security and networking technologies.
• Experience with Configuration Management and Quality Assurance Systems.
• Ability to Interpret and revise engineering plans, drawings, and specifications.
• Proficient with Microsoft Office Suite.
• Effective oral and written communication skills.

PI282632635

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

At Ride Engineering, it is our responsibility to move people through our stories in magical ways that bring these experiences to life! Ride Engineers bring optimism and solutions to design challenges that often seem impossible and partner with diverse creative talent to define and build one-of-a-kind experiences that bring fun and joy to millions of people all around the world. We Create to Inspire!

The Ride Control Systems Engineer will report to the Executive Ride Control Systems Engineer.

This is a full time role.

What You Will Do:

• Manage entire scope to conceive, design, & deliver control systems for a wide variety of complex and innovative ride systems and related equipment
• Conduct systems engineering for ride control systems
• Define system use cases and user needs
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Ensure compliance with control system safety standards
• Perform engineering design and analysis for ride control systems
• Develop control strategies and algorithms
• Research new products, technologies, and methodologies
• Design, model, and analyze control systems, data communication, and dynamic systems
• Collaborate with other design and engineering professionals to implement ride control systems
• Develop implementation plans and budgets
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents, and lead testing efforts

Required Qualifications & Skills

• 5+ years experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Experience with requirements management, test plans/procedures, and test execution
• Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Solid skills in technical document writing
• Ability to travel domestically and internationally for 1-week to 3-year durations
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Proficient with engineering design tools, including AutoCAD, Matlab, Simulink, Solidworks
• Proficient in Rockwell and Siemens automation systems architecture and components
• Expertise in motor and motion control methods and components
• Knowledge of pneumatic controls and devices
• Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at DXMedia
  
  The hiring range for this position in California is $123,300 to $200,300 per year. The base pay actually offered will take into account internal equity and also may vary
  depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?

As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe.  Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!

You will report to the Ride Controls Systems Engineering Executive

This is a full time role.

What You Will Do:

• Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
• Perform engineering design and analysis for ride system networks, with focus on automation system architecture
• Design and test cyber security solutions and network architectures for ride systems
• Design, model, and analyze data network communication systems
• Research and test new products, technologies, and methodologies and conduct trade-off studies
• Prepare and propose new cyber security and network architecture concepts and standards
• Lead standards and policies development for ride control network and cyber security architectures
• Collaborate with and support project teams on network requirements, implementation, and issues
• Collaborate with attraction development teams to design and deliver ride networks
• Develop and analyze OT network performance requirements for high availability real-time system
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Develop implementation plans and budgets for ride control network systems
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents and conduct ride network installation/commissioning efforts

Required Qualifications & Skills

• At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
• At least 3 years of experience in network systems design, installation and configuration
• At least 3 years of experience with Linux and Windows system administration experience
• Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
• Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
• Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
• Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
• Demonstrated experience evaluating and remediating network and system vulnerabilities
• Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
• Solid skills in technical document writing
• Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
• Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems

Preferred Qualifications and Skills

• Proficient in Rockwell and/or Siemens automation systems architecture and components
• Experienced in fail-safe and safety-related system design and analysis
• Experience with multitasking software platforms and design approaches
• Experience with wired and wireless network design and configuration
• Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
• Knowledge of software configuration management/version control tools
• Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXmedia

Job Description

Main Responsibilities: • Develop electrification control solutions at both component and system levels for a broad range of applications using a model‑based design approach. • Evaluate control designs through analysis, simulation, Hardware‑in‑the‑Loop (HIL) testing, laboratory testing, and field testing. • Interface with stakeholders to develop control system requirements that support vehicle electrification solutions. • Conduct electric drive and vehicle system simulations to support control system development and vehicle performance assessments.

Show Less

Additional Skills & Qualifications

What Skills You Need: • 2 or more years of experience in power electronics or control algorithm development. • Proficiency in MATLAB, Simulink, and Simscape. • Experience simulating power electronics, electric machines, and/or control systems. • Effective written and verbal communication skills (English). • Relevant academic research experience will be equally considered. What Makes You Stand Out: • Hands-on laboratory or vehicle testing experience with power electronics or electric motors. • Experience with Hardware-in-Loop testing. • Experience with auto-code generation and embedded software implementation on microcontrollers and FPGAs. • Working knowledge of version control and Agile software development • Experience with advanced research topics. • Experience with power electronics hardware or software design. • Experience with advanced control systems and techniques such as observers, model predictive control, filter design, etc. • Experience with power electronics control and electric motor control. • M.S. degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems. Education: • Minimum of a B.S. degree in Electrical Engineering, Mechanical Engineering, or Physics.

NR Consulting is currently seeking a highly motivated Senior Control System Engineer for an opportunity in Aurora, OH – Onsite!

Position Title: Senior Control System Engineer

Location: Aurora, OH – Onsite

Anticipated Start Date: 04/13/2026

Please note this is the target date and is subject to change. NR consulting will send official notice ahead of a confirmed start date.

Job Type: Fulltime Permanent Role/Direct Hire

Salary Range: $90K - $130K/annum plus benefits

Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.).

Job Description:

We are seeking a Central Utility Controls Engineer to join the engineering team of a leading industrial automation and manufacturing organization. In this role, you will support the design, development, testing, and implementation of control systems for large-scale utility and plant support applications using modern automation platforms.

The position involves working closely with engineering and project teams to deliver reliable automation solutions supporting facility infrastructure and industrial utility systems.

Key Responsibilities:

• Develop functional specifications and control documentation, including sequence of operations and system documentation.

• Collaborate with electrical design teams to support control panel and system drawing packages.

• Program, test, and deploy PLC, DCS, and HMI control systems for industrial utility applications.

• Develop and support system testing procedures, including factory and site acceptance testing.

• Assist with system commissioning, start-up activities, and validation during project deployment.

• Provide technical guidance and training to internal teams and end users when required.

• Troubleshoot and support existing automation systems to ensure optimal performance and reliability.

Required Qualifications:

• Bachelor’s degree in Engineering or a related technical discipline from an accredited institution.

• 3–6 years of experience in industrial controls, automation, or related engineering roles.

• Experience working with industrial automation platforms such as PLC, DCS, and HMI systems.

• Familiarity with industrial communication protocols commonly used in automation environments.

• Experience supporting industrial utility or process control systems is highly valued.

• Ability to travel approximately 25% for project meetings, site visits, and commissioning activities.

Preferred Qualifications:

• Professional Engineer (PE) license or progress toward licensure.

• Experience leading technical project tasks or small engineering teams.

• Additional experience in industrial automation or process systems is a plus.

About NR Consulting

Founded in 2005, NR Consulting is a leading global provider of workforce solutions, technology services, and recruitment strategy, trusted by Fortune 500 and mid-sized organizations across North America, Europe, and Asia. Headquartered in Boulder, Colorado, with a Global Delivery Center in India, NR Consulting partners with clients to drive innovation, accelerate business outcomes, and deliver scalable talent solutions across industries such as engineering, information technology, energy, life sciences, and manufacturing.

With a strong belief in the power of people and performance, NR Consulting has built a reputation for excellence in direct hire, contract staffing, and project-based consulting. Our commitment to integrity, diversity, and client success has enabled us to consistently deliver top-tier professionals who help businesses achieve their strategic and operational goals.

Guided by our core values — People First, Accountability, Excellence, and Partnership — we take pride in fostering long-term relationships with clients and candidates alike. Our multicultural teams work collaboratively across geographies to provide agile, high-quality, and results-driven solutions that make a measurable difference.

NR Consulting is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Technical school diploma or equivalent combination of education and experience.
• Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
• Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
• Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
• Familiar with AQL, sampling methods and traceability.
• Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
• Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
• Must be a US Citizen.

• Train other inspection personnel on CMM software and manual measurement techniques.
• Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
• Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
• Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
• Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
• Reconcile final inspection documentation for shipments
• Interact with source inspector as needed and part-take in source inspection duties if necessary.
• Read, understand and interpret Mechanical/Electronic drawings.
• Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
• Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
• Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
• Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
• Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
• Work with Engineering, Operations, and other sources to resolve issues and meet goals

• Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
• Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
• Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
• Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
• Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
• Consistently demonstrate commitment to company values
• Keep management informed of area activities and of any significant problems
• Assume responsibility for related duties as required or assigned
• Ensure that work area and work areas of direct reports are clean, secure, and well maintained
• Complete special projects and miscellaneous assignments as required

• While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
• This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
• This is a full-time position. Overtime and weekend work may be required as job duties demand.
• Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.

• While performing the duties of this job, the employee is regularly required to talk and hear.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
• The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
• 
  The employee may be required to lift and/or move items weighing up to 25 pounds.

Now Hiring: HVAC Controls Technician

Location: St Louis, Missouri

Schedule: Full-time | Flexible Hours (7:30 AM – 4:30 PM typical shift)

About the Role

We’re looking for a motivated and skilled HVAC Controls Technician to join our growing team! An HVAC Controls Technician is responsible for programming, troubleshooting, startup, checkout, and servicing of Building Automation Systems (BAS). Key duties include configuring and optimizing system performance, diagnosing and resolving issues, and ensuring proper integration of HVAC controls. The technician will also work closely with project teams, contractors, and clients to ensure seamless operation and functionality of the BAS. Strong technical expertise in control systems, problem-solving skills, and the ability to work independently in field environments are essential for this role. If you enjoy hands-on problem-solving, working with advanced control systems, and seeing your work directly impact performance — this opportunity is for you. This full-time position offers flexible scheduling, typically with 8-hour shifts during office hours (7:30 AM – 4:30 PM).

What You’ll Do

• Program, configure, and optimize Building Automation Systems (BAS).
• Perform startup, checkout, and commissioning for new projects.
• Troubleshoot control issues and resolve HVAC system integration challenges.
• Conduct point-to-point verification and ensure systems meet design specifications.
• Assist with field service calls during project and warranty phases.
• Guide and support electrical subcontractors on project sites.
• Deliver materials, monitor installations, and maintain communication with the project team.
• Update and correct manual drawings for engineering and documentation accuracy.
• Participate in the on-call rotation and assist with support agreements.
• Collaborate with management to develop a personalized professional growth plan.

What We’re Looking For

• Strong time management and problem-solving skills
• Excellent communication and customer service mindset
• Action-oriented and dependable under pressure
• Understanding of HVAC systems, electrical wiring diagrams, and basic networking
• Positive, team-oriented attitude
• Valid driver’s license and ability to pass a background check and drug screening

Nice to Have:

• 1+ years of experience in HVAC, Electrical, or Automation systems
• Advanced computer or networking skills
• Associate’s or Technical Degree in HVAC, Electrical, or Automation

What We Offer

We believe great work deserves great rewards — that’s why we invest in your success and well-being:

Health & Wellness

• 100% Employer-Paid Medical, Dental & Vision Insurance for Employees
• Life Insurance
• FSA/HSA Accounts
• Short & Long-Term Disability
• Employee Assistance Program
• Fitness Reimbursement

Career & Financial Benefits

• Simple IRA Retirement Plan
• Tuition Reimbursement & Paid Training Opportunities
• Bonuses & Overtime Opportunities
• Growth potential – We love to promote from within!
• Boot Credit

Work-Life Balance

• Paid Time Off, Paid Holidays & Personal Time
• Flexible Schedule & Parental Leave
• Company Vehicle, Phone, and Fuel Expenses
• On-Call Incentives
• Fun and Collaborative Team Culture

Join a company where your work truly powers performance.

If you’re ready to take your HVAC controls career to the next level with a team that values growth, collaboration, and innovation — we’d love to hear from you!

Apply today and start building smarter with us.

Electrical Systems Engineer

Location: Madison Heights, Michigan

Salary Range: $125,000/year to $140,000/year; The salary may be negotiable based on experience, education, geographic location, and other factors.

Job Summary

This position leads the design and development of electrical control systems for vehicle applications, bridging customer requirements with technical solutions. The role combines electrical engineering, embedded software development, and systems integration expertise to deliver tested, production-ready control systems while maintaining direct customer engagement throughout the development lifecycle.

Job Functions:

• Capture and document customer system/hardware/software requirements
• Design and develop system wiring, including wiring schematics, conductor, connector and terminal selection
• Specify, design and develop control system electronics hardware, sensors, and actuators
• Design, develop, and verify software and control algorithms to meet requirements
• Perform data analysis and system control tuning/calibration
• Perform system testing and troubleshooting, ensuring a control system meets requirements
• Effectively interface with co-workers and customers in meetings

Minimum qualifications:

Bachelor's degree in electrical engineering, computer engineering, mechanical engineering, or computer science

• Minimum 5 years of post-graduate working experience in controls (automotive or military vehicle level preferred)
• Experience with at least one of the following software languages: MATLAB/Simulink/State flow, C, or C++
• Experience with CANbus, Serial, and Ethernet communications
• Ability to read, understand and create electrical schematics, and a good understanding of electrical and electronics basics
• Excellent verbal, written, and interpersonal skills, including the ability to write concise technical reports
• Initiative to work independently and handle several assignments simultaneously
• Able to manage time to ensure projects are completed by deadline
• Ability to independently absorb new technical assignments
• Must be willing to support limited travel
• US Citizen

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at

Equal Opportunity Employer/Veterans/Disabled

Benefits offerings include but are not limited to:

• 401(k) with match
• Medical insurance
• Dental Insurance
• Vision assistance
• Paid Time Off

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

POSITION SUMMARY

The Controls Leader will provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, compliance, personnel safety and technician skill development relative to plant electrical power and process control systems.

KEY RESPONSIBILITIES

• Assists primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership.
• Provides input to the Engineering Projects Manager to develop and manage power and control standards and ensure application of the standards on all projects and upgrades.
• Leads the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies.
• Builds and maintains a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development. Coaches technicians on skill assessment and development of operating within the department.
• Manages Electrical & Instrumentation (E&I) technicians and daily direction setting.
• Knows, communicates, and ensures technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910). Is also responsible for ensuring equipment and safe practice compliance in their area of responsibility.
• Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development.
• Provides support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development.
• Works with engineering and operations to identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost.
• Owns parts or whole Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.).
• Works closely with engineering and operations leaders on selection and installation/start-up of new equipment. Becomes the technical expert on new equipment and ensures the training of others regarding control systems.
• Provides power and controls engineering support on capital initiatives.
• Provides support throughout other parts of the plant as needed on a daily basis.
• Learns and applies control, simulation and process modeling technologies to analyze and improve overall process and packaging operations.

Education

• Bachelor's Degree in Engineering is required; Electrical engineering degree is preferred

Experience

• 5 years of relevant controls experience is required
• Manufacturing experience is preferred
• Mechanical and electrical experience in food manufacturing is preferred

Other

• Ability to work and manage within a team environment
• Strong knowledge of machine and/or process control hardware, instrumentation and software including Allen Bradley PLC and Rockwell FactoryTalk platforms
• Working knowledge of NFPA and OSHA guidelines related to electrical equipment and practices
• Proficiency in plant historian
• Understanding of technical systems and terminology
• Experience learning and integrating new technologies
• Experience leading the installation of equipment in food manufacturing environment
• Demonstrated results in manufacturing maintenance utilizing maintenance systems
• Experience with plant systems software
• Self-motivated and able to motivate others
• Strong organizational, critical thinking, and problem-solving skills
• Effective presentation, verbal, and written communication skills
• Proficient in Microsoft Suite applications
• Excellent interpersonal skills
• Willingness to work off-shifts or weekends as needed, as well as to take off-shift support calls as needed
• Experience leading, teaching or managing others effectively
• Some travel required
• Able to perform moderate activity including but not limited to, significant time spent on manufacturing floor and some physical work on equipment