180 Engineering Jobs in Usa

We are looking for a Project Manager to work on-site at a client facility in Sistersville, WV. This contract is estimated to last approximately 1 year or more, with the potential of extension to permanent full-time employment. Client facility is a chemical plant and will require the Project Manager to manage multiple capital projects at a time. Candidates for this position should have large-scale plant and industrial chemical experience. This is an ON-SITE position and remote candidates cannot be considered.

The Project Manager is responsible for managing all activities for Professional Engineering projects in accordance with the project schedule and budget. This includes directing and coordinating an engineering design team and/or subcontractor activities in accordance with project/client procedures, scope of work, project cost control, client/vendor/contractor interface, and contract specifications. The Project Manager will serve as the primary point of contact with the client for all project-related activities and communication. This individual is expected to fulfill the requirements of the position and understands that the design process includes visiting clients’ facilities where they may be expected to perform physical work.

Qualifications:

To perform this job successfully, you must be able to accomplish each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Upon request, reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Education/Experience/Key Responsibilities:

• BS degree in and Engineering discipline; Chemical preferred. Other degrees may be considered based on past project experiences.
• Ten (10) years minimum project management or project engineering experience in Chemical or Petrochemical industries, including scope, budget, schedule and construction oversight.
• Provide project management of multi-disciplined engineering projects and maintain responsibility for overall execution of work.
• Establish project schedule and budget and execute and monitor progress in meeting schedule, budget and contractual requirements.
• Anticipate project staffing needs and provide input to selection of project team members.
• Establish objectives and provide performance feedback for project team members.
• Work collaboratively and build effective relationships with others.
• Communicate effectively across all levels within the organization.
• Maintain a positive attitude.
• Manage multiple projects.
• Travel as required for field work and/or other client/business objectives.
• Work with clients to develop scope, resolve conflicts, and build relationships.
• Actively promote, support, and monitor Chemstress’ safety policies and the safety policies of our clients.
• Document and execute changes in scope of project.
• Anticipate problems and work with the client, engineering, OEM's, subcontractors, and project team to provide corrective actions.
• Act as technical resource for team and actively coach junior engineers and designers.
• Create concepts and provide options to solve complex process problems.
• Coordinate feasibility level scope and cost estimates as well as detailed design and project execution.
• Prepare and deliver technical presentations to clients regarding project related items.
• Ensure that Chemstress and the clients QC procedures are followed.
• Lead data gathering, design reviews, installs, checkout/startups and troubleshooting. efforts associated with project work.
• Proficient in MS Project, Word, Excel and able to review drawings using various CAD packages.
• Experience with managing contractors and vendors.
• Experience with managing capital engineering service projects.

Eligibility Requirements:

• Must be legally authorized to work in the United States without restriction
• Authorizes a background investigation, including verification of past employment, criminal history, and educational background
• Submits to a drug test post offer
• Possesses a valid driver’s license
• Accepts that this position may require some domestic overnight travel
• Willingness to commute to office location at least 3 days per week
• Ability to collaborate with others in an on-site, team environment
• Demonstrate reliable, consistent, and punctual work-site attendance
• Ability to utilize the required technology such as computers, phones, and tablets to complete job duties
• Must be an organized, self-starter who can independently manage time effectively
• Have the ability to handle varying workloads and the variable stress-levels associated with said workload
• Ability to meet the quality and productivity standards required by the company

Location: On-site in Sistersville, WV

Job type: Long-term contract (1 year+)

Pay: $60 - $72/hr

Chemstress Consultant Company is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. Chemstress does not discriminate in employment opportunities or practices on the basis of age, color, disability, gender identity, national origin, race, religion, sex, sexual orientation, veteran status, or any other characteristic protected by country, regional or local law.

Keywords: industrial, chemical, engineer, engineering, project management, project manager, PM, PMO, consulting, full time, contract, EPC, EPCM, stage gate process, FEL

Engineering Technician (Firearms R&D)

Youngsville, NC | Full-Time | On-Site | Hourly

Bachstein Consulting is growing, and we’re looking for a hands-on Engineering Technician to support our firearms research, development, and testing efforts.

This is a shop-based, hands-on role working closely with engineers to build prototypes, assemble test hardware, support range testing, and keep development programs moving quickly. Our in-house machine shop supports rapid iteration and low-rate production, allowing ideas to move quickly from concept to functional hardware.

This role is best suited for someone who enjoys building, troubleshooting, and working with mechanical systems in a fast-moving development environment.

Key Responsibilities

• Assemble and modify prototype firearm components and test hardware
• Support engineering test setups and range testing activities
• Troubleshoot mechanical issues during prototype builds and testing
• Maintain and organize parts, components, and test equipment
• Assist engineers with prototype fabrication and development work
• Record and document test observations and hardware changes
• Help prepare and ship components for outside processing when needed
• Maintain a clean and organized work environment in the shop and lab

Required Qualifications

• Eperience assembling or troubleshooting mechanical systems
• Comfort working with hand tools and precision measuring tools
• Ability to work safely and carefully around firearms systems
• Strong attention to detail and organization
• Ability to follow technical instructions and work independently

Preferred Experience

• Experience working in a machine shop, prototype shop, or engineering lab
• Familiarity with firearms platforms and mechanical operation
• Experience with prototype assembly or engineering test environments
• Experience using precision measurement tools (calipers, micrometers, gauges)

Ideal Candidate

• Hands-on problem solver
• Mechanically inclined and comfortable building things
• Detail-oriented and safety-minded
• Reliable and able to work independently
• Interested in firearms design and development

Work Environment

This is an on-site, hands-on role in a small engineering-driven team. Work will include time in the machine shop, lab, and test environments supporting prototype development and firearms testing.

Veterans Encouraged to Apply

Veterans with experience in military weapons systems, armory work, maintenance, or technical specialties are strongly encouraged to apply. Many of the skills developed in military service translate directly to this type of hands-on engineering support role.

Compensation

• Hourly position. Compensation is competitive and based on experience.

Automation Engineering Technician

Location: Smyrna, TN (Technical Logistics Center)

Asurion, the global leader in technology support and protection. Innovation and dedication to delighting customers has made it the preferred provider of technology protection to the world’s largest wireless carriers, trusted retailers and popular device manufacturers. Asurion’s 17,000 global employees support its 280 million consumers with an award-winning experience delivered through products and services that have set the standard in the industry.

Role Summary

The Automation Engineering Technician is a key technical expert responsible for the deployment, maintenance, and optimization of automated solutions within Asurion’s Supply Chain network. This role bridges the gap between high-level engineering design and daily operational execution. You will ensure that automated systems—including robotics, vision systems, and conveyance—operate at peak efficiency to drive productivity, reduce costs, and support New Product Introductions (NPI).

Key Responsibilities

Technical Operations & Maintenance

• System Upkeep: Execute general maintenance, fabrication (jigs/tooling), and repairs on automated equipment to ensure safety, and maximum up time.
• Preventive Care: Research OEM manuals to develop and execute Preventive Maintenance (PM) tasks, calibrations, and ESD checks in compliance with QMS and safety standards.
• Performance Monitoring: Track and report on key metrics such as Overall Equipment Effectiveness (OEE), Units Per Hour (UPH), availability, and yield.
• NPI Support: Participate in the installation, relocation, and testing of new hardware and software deployments.

Engineering Support & Process Improvement

• Troubleshooting: Lead root cause analysis and Level 3 technical support for complex system malfunctions, escalating to senior engineering staff when necessary.
• Continuous Improvement: Identify and implement opportunities for process enhancements, utilizing data to influence decision-making and operational strategy.
• Documentation: Create and maintain high-quality engineering reports, Work Instructions (WI), Job Aids (JA), and FMEA documentation.
• Operational Readiness: Support Automation Engineers in developing business cases, tracking CAPEX/OPEX spend, and validating projected savings.

Management & Coordination

• Inventory Control: Manage maintenance spare parts inventory (min/max levels) and oversee the organization of work areas using 5S methodologies.
• Stakeholder Collaboration: Act as a liaison between internal teams (IT, Operations, Quality) and external vendors to resolve technical issues and manage project timelines.
• Training: Facilitate knowledge transfer by training operators and other technicians on new equipment and updated safety protocols.

Qualifications & Skills

Education/Experience Minimum

• Associate degree in engineering or 2+ years of hands-on experience implementing automated solutions in a manufacturing or supply chain environment.

Technical Proficiency

• Practical knowledge of PLCs, robotics, vision systems, and conveyance.
• Experience with QMS, 5S, and Root Cause Analysis.
• Advanced skills in CAD, 2D and or 3D, MS Office (Excel & PowerPoint) for data analysis and reporting.

Core Competencies

• Strong analytical skills with the ability to interpret complex technical documents and legal/financial reports.
• Ability to work independently while fostering cross-functional collaboration.
• A "bias for action" with the ability to prioritize tasks in a fast-paced, multi-requestor environment.

Travel

• Ability to perform minimal domestic and international travel as required.

Crown Equipment Corporation is one of the world’s largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation and fleet management technologies that are revolutionizing the material-handling industry.

Job Responsibilities:

Lead the development, implementation, and performance of CAE, Simulation, FEA, Stability, and Structural Analysis tools that support validation of new and existing vehicles, systems, and components. Manage a team of engineers, guide technical decision‑making, and contribute directly to engineering solutions when needed. Reports to the Director or Senior Manager of Component Development.

• Product and Technology Champion - Lead development of new products and structural systems, approving technical solutions and driving innovation. Identify emerging technologies and competitive trends; recommend product, process, and tool improvements. Support Current Product Engineering, Service, Sales, Manufacturing, Purchasing, Quality, and Product Safety on issues related to masts, attachments, durability, and stability. Conduct product reviews to ensure competitive, innovative designs move to production.
• Project Planning, Supervision and Technical Review - Ensure engineering work meets product goals, industry standards, and sound engineering practices. Review and approve test results and production releases. Support budgeting, resource planning, and personnel decisions (hiring/termination).
• Employee Development - Perform duties such as creating/revising job descriptions, conducting Talent Development discussion sessions, rating performance, establishing/tracking goals and assisting in the completion of annual wage reviews. Responsible for coaching, motivating, mentoring, and developing direct reports to successfully take on additional responsibilities.
• Leadership and Communication - Ensure teams meet product, cost, and schedule targets. Collaborate with department leaders to resolve design direction, priorities, and resource needs. Communicate project and departmental updates to management via written and oral presentations. Perform other duties as assigned.

Minimum Qualifications:

• Bachelor degree in Mechanical Engineering, Aerospace Engineering, or related
• 16 years of product development experience, including mechanical design experience, project management, and supervision
• Skilled in finite element analysis (FEA), computer aided design (CAD), 3-D modeling, and simulation software; preferably Nastran, FEMAP, Simcenter, and NX CAD
• Good written, verbal, analytical, and interpersonal skills
• Ability to travel occasionally with overnight stays (0-5%)
• Valid driver license and reliable transportation to travel locally between company locations during scheduled workday
• Ability to learn operation of lift trucks
• Per 8-hour shift. Sit 8 hours and stand 0 hours. Both typical and non-typical office environment (low to moderate noise level, low exposure to hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking, and climbing stairs. Occasional use of office equipment (copiers, printers, etc.).

Preferred Qualifications:

• Working knowledge of the product series in lift truck design, industrial design and ergonomics

Work Authorization:

Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable.

No agency calls please.

Compensation and Benefits:

Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.

EOE Veterans/Disabilities

The Engineering Aide III supports engineering teams by applying engineering techniques, assisting with testing and inspections, performing light fabrication, and preparing documentation, reports, and analyses. This role is hands-on and lab-focused, providing essential operational and technical support to enable engineers to efficiently progress projects.

Key Responsibilities

• Support engineering projects by conducting inspections, analytical tests, and data analysis.
• Collect, analyze, synthesize, and summarize test data; generate reports, charts, and presentations.
• Assist with root cause analysis and support corrective actions.
• Prepare and modify drawings, schematics, and diagrams based on engineering direction.
• Build electrical/mechanical harnesses and perform light fabrication and assembly tasks.
• Set up and execute functional and environmental tests following provided test plans.
• Maintain quality standards through testing, process evaluation, and documentation.
• Track expenses and assist with basic cost-benefit analyses.
• Support lab operations, equipment setup, and general lab organization.
• Collaborate with multiple engineers, prioritize tasks, and communicate timelines clearly.

Required Skills & Qualifications

Education & Experience

• Associate’s degree in Engineering Technology or a related field
• Minimum 2+ years of relevant experience
• Internship experience may be considered

Technical Skills (Required)

• Ability to read and interpret schematics, diagrams, and drawings
• Experience hand-fabricating electrical or mechanical harnesses
• Familiarity with environmental testing (thermal chambers, vibration systems, pressure equipment, etc.)
• Proficiency with Microsoft Word and Excel for documentation and reporting
• Comfortable using standard hand tools for mechanical and electrical assembly/disassembly
• Basic understanding of engineering principles and manufacturing standards

Technical Skills (Desired)

• Light fabrication skills (sheet metal or similar methods)
• Experience with thermocouple instrumentation or thermal testing of electronics
• Basic PCB or SMT soldering experience (or willingness to learn)
• Exposure to procurement processes or laboratory purchasing
• Understanding of domestic and international shipping procedures

Soft Skills

• Strong verbal and written communication skills
• Highly organized and detail-oriented
• Strong analytical and problem-solving abilities
• Self-motivated with a proactive approach to work
• Team-oriented and able to work with multiple stakeholders
• Willingness to learn new tools, systems, and test methods

ZRG has been engaged to recruit an Assistant Vice President, Engineering and Energy for Columbia University

Columbia University’s location in Upper Manhattan places it at the intersection of academic excellence and urban vitality. Situated near renowned medical centers, research institutions, cultural landmarks, and policy organizations, the University benefits from deep connections across public, private, and nonprofit sectors. This proximity enhances opportunities for interdisciplinary collaboration, experiential learning, and meaningful engagement with communities locally and globally.

POSITION:

Reporting to the Vice President for Operations, the Assistant Vice President of Engineering and Energy is responsible for visionary and strategic energy services and programs for Columbia University. This position will direct, strategize, and implement energy management and engineering services for the campus buildings and Central Energy Plants totaling 9 million square feet. This includes master planning, conservation efforts, managing renewable energy portfolios, strategic procurement of natural gas and electricity, central plant oversight, State of Good Repair (SOGR) program management, and other engineering and energy-related strategic initiatives.

QUALIFICATIONS:

•Bachelor’s degree in engineering or related field required. Master’s degree in Engineering, MBA or other advanced degree preferred.

•Ten years of experience in utility infrastructure, university utility and facilities operations preferred; ten years of experience in related field.

•Demonstrated experience managing the operation and maintenance of central utility plants preferred.

•Minimum of seven years of environmental / sustainability experience including implementing environmental or sustainability programs, resource management, environmental initiatives, or equivalent experience.

•Demonstrated experience with energy, water, and waste conservation in buildings.

•Skilled in budget preparation, financial management, and analysis.

•A flexible, problem-solving approach to leadership.

•Demonstrated effective leadership skills within a complex, multilayered organization.

•Ability to think strategically and drive priority initiatives through the organization.

•Strategic planning skills. Ability to make administrative / procedural decisions and judgments required; Skills in examining and re-engineering operations and procedures, formulating policy, and developing and implementing new strategies and procedures.

•Ability to develop, plan, and implement short- and long-range goals.

•Sensitivity and diplomacy to balance competing campus interests.

•Computer literacy in Windows and Microsoft Office environments.

•Strong communication and presentation skills.

•Demonstrated ability to work with senior leadership.

•Demonstrated management skills with ability to relate to a diverse and complex operation and supervision of exempt and non-exempt staff.

•Utilization of principles of management to ensure responsibilities are met effectively and efficiently. This includes planning, controlling, leading, and organizing.

•Demonstrated skills in using sound analytic methods and ability to work with complex analytic issues.

•Ability to effectively interact with departmental staff, as well as campus and university-wide administrators.

•Excellent customer service skills and ability to effectively communicate within and outside of the department.

•Skill to effectively communicate orally, in writing, and electronically.

•Ability to maintain accuracy and attention to detail in a fast-paced environment of changing priorities.

•Respond promptly by phone or in person as appropriate to emergency situations and therefore 24/7 availability.

•Valid driver's license and successful completion of the University's Motor Vehicle Records background check process.

Job ID: 410396

Practice area:- IP - Patent - Computer Science,IP - Patent - Electrical Engineering,IP - Patent - Software

Patent Associate Attorney – Software / Electrical Engineering (2–6 Years Experience) | Am Law Firm | Denver, Colorado

Keywords:- Patent Associate Attorney, Intellectual Property Patent Attorney, Software Patent Attorney, Electrical Engineering Patent Attorney, Patent Attorney Denver, Denver legal jobs, Attorney jobs Denver CO, USPTO admission required, Law firm patent associate, Partner-track position, lawyer,Patent litigation, hard sciences, semiconductor, software litigation, hardware patent, computer science litigation, engineering patent dispute

This Amlaw firm values associates that are "all in" and is therefore leanly staffed, providing a fair amount of client contact amongst its associates. In addition, this firm offers a high amount of pro-bono opportunities, especially for first years. This firm values diversity and has a collaborative, social, work environment.

A prominent Am Law firm is seeking a Patent Associate Attorney (2–6 years experience) to join its innovative intellectual property practice in Denver, Colorado. This role offers the opportunity to work with emerging technologies while helping sophisticated clients develop and protect their intellectual property portfolios.

This Patent Associate Attorney opportunity focuses on advanced technology sectors including software, artificial intelligence, machine learning, consumer electronics, and data infrastructure. Attorneys pursuing Denver legal jobs in intellectual property will gain exposure to cutting-edge patent strategy while working with leading innovators and technology companies.

The Patent Attorney will collaborate with clients and technical teams to strengthen patent portfolios, interface with the United States Patent and Trademark Office (USPTO), and support complex IP matters. This partner-track position offers early responsibility, client interaction, and meaningful involvement in strategic IP protection initiatives.

This opportunity is actively interviewing candidates with strong technical backgrounds and patent prosecution experience.

________________________________________

Key Responsibilities

• Collaborate with clients to develop and expand intellectual property portfolios across emerging technology sectors.

• Prepare and prosecute patent applications before the United States Patent and Trademark Office (USPTO).

• Draft patent specifications, claims, and responses to office actions.

• Conduct legal and technical research related to software and electronics patents.

• Assist clients with patent portfolio strategy and IP protection initiatives.

• Negotiate agreements and settlements involving intellectual property rights.

• Work closely with engineers, developers, and product teams to identify patentable innovations.

• Draft legal documents and prepare technical analyses for patent filings.

• Support intellectual property transactions and licensing matters when needed.

________________________________________

Qualifications

• Juris Doctor (JD) from an accredited law school.

• USPTO admission required or eligibility to sit for the Patent Bar.

• 2–6 years of experience practicing as a Patent Associate Attorney or patent prosecution attorney.

• Degree in Electrical Engineering, Computer Science, Software Engineering, or related technical field preferred.

• Excellent academic credentials.

• Strong technical writing and analytical skills.

• Ability to communicate complex technical concepts clearly.

• Experience working within a law firm environment.

________________________________________

Education

• JD required.

• Degree in Electrical Engineering, Software, or Computer Science preferred.

________________________________________

Certifications

• USPTO admission or eligibility.

________________________________________

Skills

• Experience with consumer electronics, software systems, and web-based platforms.

• Familiarity with technologies such as generative AI, machine learning, data structures, and databases.

• Strong technical analysis and patent drafting skills.

• Excellent communication and interpersonal abilities.

• Ability to collaborate effectively with both legal and technical teams.

________________________________________

Culture & Firm Appeal

This opportunity is with a respected Am Law firm known for its collaborative culture and strong intellectual property practice. The firm maintains lean deal teams, providing associates with meaningful client exposure and direct involvement in strategic IP matters.

Associates benefit from a highly collaborative environment where mentorship, professional development, and teamwork are highly valued. The firm is also known for its strong commitment to diversity and inclusion, as well as its active pro bono programs.

For attorneys seeking Denver legal jobs in intellectual property law, this Patent Associate Attorney role provides the opportunity to work on cutting-edge technologies while building strong client relationships and technical expertise.

The firm's dynamic environment encourages innovation and supports attorneys who are motivated to grow their careers within a sophisticated intellectual property practice.

________________________________________

Why This Role Is Unique

• Work with cutting-edge technologies including AI, software platforms, and advanced electronics.

• Direct client interaction with innovative technology companies and startups.

• Exposure to sophisticated patent portfolio strategy and IP protection matters.

• Collaborative team structure with meaningful associate responsibility.

• Partner-track position within a nationally respected intellectual property practice.

• Ideal opportunity for attorneys seeking advanced Denver legal jobs in patent law.

This position rarely opens at this level and offers a unique opportunity to work at the intersection of law and emerging technology.

________________________________________

Call to Action

Apply now for a confidential discussion with a BCG Attorney Search recruiter.

Explore this elite-level opportunity today.

Submit your resume to learn more about this prestigious role.

________________________________________

BCG Attorney Search is the industry leader for placing candidates in permanent positions in law firms. Since 2000, our recruiters have placed several thousand attorneys and enjoyed extraordinarily high success rates with our candidates. As a BCG Attorney Search candidate, you have access to more opportunities than any legal placement firm in the United States. We are able to offer the most in-depth insight in the legal recruiting market thanks to our dedicated team of over 150 employees who mercilessly research, study and analyze the legal market. The depth and breadth of our research empowers us to place attorneys at rates that are unparalleled at any placement firm in the United States. Many of our recruiters make 30 to 40 placements per year, while recruiters at competitor firms are likely to make four or five. Unlike other placement firms that can only tell you about openings at major AmLaw firms, we place candidates of all backgrounds in firms of all sizes. While other legal recruiters only represent a narrow band of candidates from top law firms and top law schools, our research, firm contacts, and market insight allow us to place hundreds of candidates each year who do not fit this mold. It is rare that we do not get candidates we represent interviews and offers. No one in the world is better at legal recruiting and placement than BCG Attorney Search.

BCG Attorney Search will confidentially review your application and will not forward your materials to the firm without first discussing the opportunity with you.

Engineering Project Coordinator

Are you a highly organized individual with a passion for engineering projects? Our company is seeking a dedicated Engineering Project Coordinator to join our team. As a crucial link between engineering, sales and marketing teams, you will play a pivotal role in facilitating the smooth execution of engineering projects from inception to completion. This role offers a unique opportunity to leverage your organizational skills and engineering knowledge to ensure projects stay on track, deadlines are met, and objectives are achieved. If you thrive in a fast-paced environment and enjoy working collaboratively to drive project success, we encourage you to apply and become an integral part of our dynamic team.

About the Company

Connection Technology Center (CTC) is the global leader in the design & manufacture of cutting-edge vibration analysis hardware for machine condition monitoring. As a family-owned & operated business for 30 years, we are proud to play a crucial role in preventing operational disruptions, financial losses, and safety concerns for heavy industry. From small scale manufacturing to Fortune 500 companies in Paper & Pulp, Auto & Steel, Food & Beverage, Pharmaceutical, Mining and many more, our mission is to create products that help ensure seamless operational uptime and contribute to a safer, more efficient manufacturing future.

Main Responsibilities

Project Planning and Scheduling:

o  Assist in the development of project plans, timelines, and schedules.

o  Coordinate with project managers and team members to ensure alignment with project objectives and deadlines.

Resource Management:

o  Allocate resources, including personnel, equipment, and materials, to support project activities.

o  Monitor resource utilization and identify any potential bottlenecks or constraints.

Documentation and Reporting:

o  Maintain accurate project documentation, including project plans, meeting minutes, and progress reports.

o  Prepare regular status updates and reports for project stakeholders.

Communication and Coordination:

o  Serve as a central point of contact for project-related inquiries and communications.

o  Facilitate communication between project team members, clients, vendors, and other stakeholders.

Quality Assurance:

o  Ensure adherence to project quality standards and requirements.

o  Conduct quality reviews and inspections to verify compliance with project specifications.

Change Management:

o  Manage change requests and modifications to project scope, schedule, or resources.

o  Assess the impact of proposed changes and communicate updates to relevant stakeholders.

Requirements

o  Bachelor’s degree in Engineering, Project management, or related field.

o  Proven experience in project coordination or management within the engineering industry.

Knowledge, Skills, and Abilities

o  Excellent organizational and time management skills.

o  Strong attention to detail and accuracy.

o  Proficiency in project management software.

o  Effective communication and interpersonal skills.

o  Ability to adapt to changing priorities and work in a fast-paced environment.

o  Must be able to work individually as well as in a small team environment.

Work Location

This in-person position will work out of the Victor, NY facility.

Salary Range: $55,000 - $65,000

Benefits

• Health Insurance
• Dental Insurance
• Vacation Time
• Sick Leave
• 401K plan with Employer Match
• Summer golf membership to Bristol Harbour Private Golf Course 

How to Apply

Please apply here: Technology Center (CTC) is an equal-opportunity employer. NYS law prohibits discrimination because of age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, domestic violence victim status, carrier status, gender identity, prior conviction records, prior arrests, youthful offender adjudications or sealed records unless based upon bona fide occupational qualification or other exception, or any other protected characteristic as outlined by federal, state, or local laws.

Summary:

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations.

Goals:

• Build products and provide services with the highest Flexibility, Productivity, and Quality.
• Achieve total customer satisfaction through technical excellence and responsive engineering support.
• Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams.

Objectives:

1.      Support production operations in the following categories:

a.      Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage).

b.      Improve quality yield through root cause analysis, corrective actions, and robust process setup.

c.      Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release.

2.      Provide engineering services to meet customer needs and expectations in the following areas:

a.      Design for Manufacturability (DFM).

b.      Manufacturing Process Instruction (MPI) creation and maintenance.

c.      Engineering Change Order (ECO) implementation.

d.      Defect Reduction Team (DRT) meetings and follow-up actions.

e.      Failure analysis and corrective action documentation.

f.       Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization

g.      Other engineering requests as required by customers or management.

Job Description:

SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support

1. Review daily SMT or build schedule to ensure process readiness.
2. Confirm all required items are complete and available prior to production:
3. Job package with full build documentation.
4. Manufacturing Process Instruction (MPI) reviewed and approved.
5. Routing definitions for data collection.
6. Validated reflow or wave solder profiles.
7. ECOs, deviations, or special instructions incorporated into the MPI and/or job package.
8. All required tooling available and verified.
9. Review pre-build DFM, document known defects, and hyperlink details in the MPI.
10. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations.
11. Document and track NPI issues and lessons learned for future builds.
12. Coordinate with Program Managers to resolve DFM showstoppers prior to build.
13. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions.
14. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.).
15. Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness.
16. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist.
17. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report.
18. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies.
19. Support production by promptly responding to technical inquiries or line support issues.
20. Exercise full authority to stop the line if repeated defects or safety concerns are observed.

Quality Data Review & Root Cause Analysis

1. Review production data in Omega Data Collection, identifying root causes and corrective actions.
2. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps.
3. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology).
4. Document corrective actions and verify implementation during the next production run.
5. Present findings and improvement updates in internal and customer quality meetings.

Other Responsibilities:

1. Create and submit Post-Build DFM reports to Program Managers with improvement recommendations.
2. Implement and validate ECO changes per revision control procedures.
3. Perform and document detailed failure analyses for internal and customer returns.
4. Participate in process improvement projects and defect-reduction initiatives.
5. Provide customer-driven engineering services or special support requests.
6. Develop and deliver internal technical training for operators and peers.
7. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates.

Qualifications:

• Bachelor’s degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline).
• 8–12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration).
• Deep understanding of SMT, Through-Hole, and system assembly processes.
• Proficient in process validation, FAI, SPC, DOE, and yield improvement.
• Familiarity with FactoryLogix and related MES/ERP systems.
• Experience leading NPI builds and developing new assembly processes from prototype through production release.
• Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor).
• Experience with Lean, Six Sigma, and structured problem-solving tools.
• Strong communication and analytical skills with the ability to multitask in a fast-paced environment.
• U.S. Citizen or Permanent Resident (ITAR requirement).

Compensation:

$120-$150K Annually

Benefits:

Medical

Dental

Vision

401K + Roth 401K

Vacation

Paid Holidays

Title: Engineering technician/ Equipment technician

Work Location: Fremont, CA 94538

Duration: 12 Months

Job Type: Temporary Assignment

Work Type: Onsite

Shift: Grave shift 10:30pm-6:30am

Pay rate: $3 /hr.

Overview:

TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide.

Job Description:

We are seeking a person capable of running an Intevac 200L sputter machine in a proficient manner to fulfill the requests for the Media Development Engineering organization. Tasks and duties will include processing experiments precisely as documented or requested by the Engineering staff. Requirements are to work in class 10 /100 cleanroom environment, follow all procedures and protocols, follow instructions well, provide feedback to coworkers/leads in a constructive/positive manner, provide technical support and suggestions to Engineering, run sputter machines efficiently and effectively, collect sputter related data on metrology tools, maintain excellent documentation, work collaboratively in a team environment to help exceed goals. These items listed below CAN be trained.

Pilot Line Operations includes - processing of the media through various media processes and equipment which includes but is not limited to the following:

• Processing of experiments for the Engineering team - processing discs through the various tools, measurement of the media, data entry, and feedback to engineering and management of the results.
• Work inside of a cleanroom - 100% PPE suits from head to toe with masks and safety glasses are required.
• Job requires a good amount of movement (walking - 50% depending on the job) to retrieve parts from point A to point B in many cases.
• Reaching is required in many cases to load and unload products onto racks, machines, etc., typically ranging from 24 inches to 53 inches not exceeding 10lbs.
• Many cases cart is provided for the transport of product, but hand carrying of product/material is required majority of the time as well.
• Computer skills are required in all the areas since the machines and the processes require computer and software interface. Interaction with Engineering is required via email, phone and excellent understanding and communication skills are required. Comprehension of correct recipes, file savings, instructions are followed precisely. Detailed use of excel is a must and understanding of Windows.
• Job requires stepping onto step stools to reach platforms for the processing of parts, as well as bending/kneeling in tight spaces for access to back of tools for process checks.
• Manual dexterity is needed in some areas to perform tape changes, adjustments based upon data received from Engineering or checklists. MDW process requires detailed manual dexterity with ESD sensitive parts and miniature assembly.
• Many of the jobs require cross training to be able to utilize the employees efficiently for planning purposes and downtime in areas.
• Saturday workday is required and part of their schedule in many cases and overtime is required.
• Must be able to focus, excellent attendance, comprehension, enthusiastic in performing their jobs, communicate detailed information well, pay attention to details, and have a good attitude and work ethics, and a true team player in getting tasks at hand completed in a timely manner.

Required qualifications:

• No previous experience required – on the job training will be provided
• Proficient computer skills (Microsoft Office – email, basic Excel, Word, and PowerPoint)
• Excellent communication skills
• Professional, reliable, responsible, dependable, etc

TekWissen® Group is an equal opportunity employer supporting workforce diversity.