Jobs in Windsor, CO

Commercial HVAC and BAS Specialist

Pay: $115,000 to $125,000 plus Bonus

Department: Operations & Maintenance

Location: Tetrad Managed Portfolio (Fort Collins, CO)

Status: Full-time, Monday-Friday, with rotating on-call

Schedule: Monday–Friday with rotating on-call responsibilities

Reports To: Chief Engineer

Position Summary

The Commercial HVAC and BAS Specialist is responsible for overseeing the preventive maintenance, performance, and reliability of mechanical and control systems across Tetrad’s managed portfolio. This position ensures the efficient operation of HVAC systems and environmental controls through proactive oversight, quality assurance, and hands-on technical expertise. In addition to system optimization and vendor coordination, the Specialist manages work orders and performs general maintenance tasks to support day-to-day building operations and tenant needs.

This role provides leadership in maintenance planning, troubleshooting, and system improvement while remaining actively engaged in field operations. The ideal candidate brings strong mechanical and diagnostic skills, a solid understanding of building automation systems, and a high level of customer service. This position requires initiative, precision, and the ability to balance strategic system oversight with responsive, hands-on facility support.

Primary Responsibilities

System Operations & Preventive Maintenance Oversight

· Oversee all preventive maintenance (PM) activities for HVAC systems, ensuring schedules are met, procedures followed, and work is properly documented.

· Evaluate PM programs for effectiveness and recommend updates to improve reliability and extend equipment life.

· Provide field support and technical guidance to facility staff and vendors performing PM and service work.

· Review maintenance reports, identify recurring issues, and develop corrective action plans.

· Conduct quality inspections to ensure equipment is maintained to Tetrad’s operational standards.

Controls & System Optimization

· Support, adjust, and troubleshoot Building Automation and Control Systems (BAS) to maintain occupant comfort and operational efficiency.

· Review control sequences and recommend adjustments to improve system performance.

· Collaborate with contractors and vendors on programming, tuning, and integration of new equipment into control systems.

· Track energy performance and identify opportunities for optimization and cost reduction.

· Maintain networked control hardware, sensors, and system integrity across multiple sites.

Project & Vendor Coordination

· Provide technical oversight during HVAC and controls-related projects, retrofits, and upgrades.

· Coordinate preventive maintenance contracts and ensure vendor work meets defined standards.

· Assist in developing mechanical and controls standards, including documentation, PM templates, and operational benchmarks.

· Support capital planning efforts through system evaluations and lifecycle recommendations.

Customer Service & Collaboration

· Deliver a high level of customer service when interacting with tenants, vendors, and internal teams.

· Communicate effectively with building occupants and staff to minimize disruption during maintenance activities.

· Represent Tetrad’s values of professionalism, integrity, and reliability in all interactions.

· Support the Chief Engineer with staff training, system diagnostics, and operational guidance.

Work Orders & General Maintenance

· Manage and respond to assigned work orders related to HVAC, controls, and general building maintenance in a timely and professional manner.

· Diagnose and resolve mechanical, controls, and facility-related service requests, ensuring minimal disruption to tenants and building operations.

· Perform hands-on general maintenance tasks as needed, including minor mechanical, electrical, plumbing, and building repairs within skill set and safety guidelines.

· Prioritize work orders based on urgency, operational impact, and tenant needs.

· Accurately document completed work, materials used, and follow-up requirements in the work order management system.

· Identify recurring maintenance issues and recommend long-term corrective solutions.

· Coordinate with vendors and internal team members when specialized services or additional support are required.

Emergency & On-Call Response

· Participate in the rotating on-call schedule for after-hours emergencies.

· Respond promptly to critical system issues, including HVAC failures, leaks, or alarms.

· Support emergency preparedness, system recovery, and weather-related response efforts.

Required Qualifications

· High school diploma or GED.

· Minimum 5 years of commercial HVAC service, controls, and mechanical systems experience.

· Strong understanding of HVAC theory, system operation, and control sequences.

· Experience overseeing or performing preventive maintenance programs in commercial environments.

· Proficiency in diagnosing and repairing air handlers, RTUs, chillers, boilers, and related systems.

· Ability to read and interpret mechanical drawings, schematics, and wiring diagrams.

· Excellent communication and customer service skills.

· Valid driver’s license and reliable transportation.

· Ability to lift up to 50 lbs and work in confined spaces, rooftops, and mechanical areas.

· Candidates must be comfortable working in proximity to animals of varying size and temperament.

Preferred Qualifications

· Journeyman HVAC License is preferred.

· Experience with one or more control systems: Johnson Controls, Siemens, Trane, Delta Controls, or comparable BAS platforms.

· Experience with BACnet and Modbus communication protocols.

· OSHA 10 or 30 Certification.

· OEM technical training (Carrier, Daikin, Lennox, or Trane).

· Trade school diploma, associate degree, or equivalent technical training in HVAC, controls, or mechanical systems.

Skills & Competencies

· Strong leadership and organizational skills in managing preventive maintenance programs.

· Advanced mechanical and electrical troubleshooting abilities.

· Excellent communication and customer service orientation.

· Skilled at coordinating contractors, technicians, and vendors.

· Proactive, analytical, and detail-oriented approach to system optimization.

· Commitment to safety, reliability, and high-quality workmanship.

· Demonstrates Tetrad’s values of integrity, accountability, and operational excellence.

This job description outlines the key responsibilities and qualifications for the Commercial HVAC and BAS Specialist role, emphasizing technical expertise, preventive maintenance leadership, system optimization, and responsive facility support across Tetrad’s managed portfolio.

Tetrad Real Estate is an equal opportunity employer committed to promoting diversity and inclusion in the workplace. We welcome applications from all qualified individuals.

Structural Welder

Fort Collins, CO

$22–$27/hour + $1,000 Sign‑On Bonus

Full-Time | W2 | Monday–Friday, 8 AM–5 PM | On‑Site

About the Role

We are seeking a skilled Structural Welder to join our team in Fort Collins, Colorado. This on‑site position involves fabricating and assembling customer‑specified buildings and structural components. You'll work with steel and other metals to build strong, precise, and durable frameworks that meet strict engineering and safety standards.

This is a W2 role with full benefits, consistent hours, and a $1,000 sign‑on bonus.

What We Offer

• $22–$27 per hour (DOE)
• $1,000 Sign‑On Bonus
• Full W2 Benefits: Medical, Dental, Vision
• Paid Time Off & Holidays
• Monday–Friday schedule (8 AM–5 PM)
• Stable, year‑round work
• Growth and cross‑training opportunities

Responsibilities

• Read and interpret blueprints and specifications
• Lay out, fit, connect, and assemble metal components
• Set up and operate welding machines (FCAW, GMAW)
• Troubleshoot welding equipment
• Align and clamp workpieces using fixtures
• Inspect and test completed workpieces for accuracy
• Operate overhead cranes and forklifts
• Perform cutting, assembly, or kitting as needed
• Follow all safety and quality procedures; use PPE
• Maintain a clean and safe work environment
• Cross-train and assist in other shop areas

Qualifications

Required

• Ability to pass 3G FCAW and 3G GMAW welding tests
• High school diploma or equivalent
• 1+ year of welding experience preferred

Preferred

• Welding trade school certificate

Physical Requirements

• Lift 50 lbs frequently and 100 lbs occasionally
• Standing, walking, bending, kneeling, crouching
• Manual dexterity, good mobility, visual and auditory acuity

Working Environment

• Fast‑paced fabrication shop
• Physically demanding work
• Loud industrial environment

Ready to shape the future of work?

At Genpact, we don’t just adapt to change—we drive it. AI and digital innovation are redefining industries, and we’re leading the charge. Genpact’s AI Gigafactory, our industry-first accelerator, is an example of how we’re scaling advanced technology solutions to help global enterprises work smarter, grow faster, and transform at scale. From large-scale models to agentic AI, our breakthrough solutions tackle companies’ most complex challenges.

If you thrive in a fast-moving, tech-driven environment, love solving real-world problems, and want to be part of a team that’s shaping the future, this is your moment.

Genpact (NYSE: G) is an advanced technology services and solutions company that delivers lasting value for leading enterprises globally. Through our deep business knowledge, operational excellence, and cutting-edge solutions – we help companies across industries get ahead and stay ahead. Powered by curiosity, courage, and innovation, our teams implementdata, technology, and AI to create tomorrow, today. Get to know us at and on LinkedIn, X, YouTube, and Facebook.

Inviting applications for the role of Assistant Manager Inventory Management & Control!

In this role, We are seeking a detail-oriented and experienced Inventory Manager to oversee and manage inventory levels at a manufacturing plant. The ideal candidate will be responsible for ensuring accurate inventory records, optimizing stock levels, minimizing excess or obsolete inventory, and coordinating effectively with procurement, production, and warehouse teams to support uninterrupted manufacturing operations.

Responsibilities

• Develop and implement inventory control policies, procedures and best practices.
• Monitor inventory levels of raw materials, WIP (Work-In-Progress), and finished goods to ensure adequate supply without overstocking.
• Coordinate with procurement and production teams to align material availability with production schedules.
• Set up process for cycle counts and coordinate with teams for conducting regular cycle counts and reconcile discrepancies between physical counts and system records.
• Ensure compliance with safety, quality, and regulatory standards in inventory handling and storage.
• Utilize ERP or inventory management systems (e.g., SAP, Oracle, NetSuite, WISE) for accurate tracking and reporting
• Analyze inventory trends and generate reports on inventory metrics such as turnover rates, NPI, slow-moving stock, and obsolescence.
• Lead and train warehouse and inventory control staff.
• Collaborate with finance for monthly, quarterly, and annual inventory audits and reporting.

Qualifications we seek in you!

Minimum Qualifications

• Bachelor’s degree in supply chain management, logistics, business administration, or a related field.
• Experience in inventory management in a manufacturing or industrial setting.
• Proficiency in ERP/MRP systems and Microsoft Excel.
• Strong analytical and problem-solving skills.
• Excellent organizational and communication skills.
• Knowledge of lean manufacturing or Six Sigma principles is a plus.

Preferred Qualifications/ Skills

• APICS CPIM (Certified in Production and Inventory Management)
• CSCP (Certified Supply Chain Professional)

Preferred skills:

• Solid understanding of the end-to-end supply chain inventory Management or WM, preferably in the Industrial businesses APICS Certification preferred (CPIM / CSCP).
• Good working knowledge of MS Office suite including MS Excel, MS Access and ERP systems like WISE.
• Experience in data mining, analysis and reporting.
• Ability to deliver projects / deliverables with minimum supervision & experience working with global teams.
• Analytical/ Problem Solving mindset with excellent Communication & interpersonal skills is necessary

Why join Genpact?

• Be a transformation leader – Work at the cutting edge of AI, automation, and digital innovation
• Make an impact – Drive change for global enterprises and solve business challenges that matter
• Accelerate your career – Get hands-on experience, mentorship, and continuous learning opportunities
• Work with the best – Join 140,000+ bold thinkers and problem-solvers who push boundaries every day
• Thrive in a values-driven culture – Our courage, curiosity, and incisiveness - built on a foundation of integrity and inclusion - allow your ideas to fuel progress

Come join the tech shapers and growth makers at Genpact and take your career in the only direction that matters: Up.

Let’s build tomorrow together.

The approximate annual base compensation range for this position is $80,000 to $95,000. The actual offer, reflecting the total compensation package plus benefits, will be determined by a number of factors which include but are not limited to the applicant’s experience, knowledge, skills, and abilities; geographic location; and internal equity

Genpact is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, sex, age, national origin, citizenship status, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Genpact is committed to creating a dynamic work environment that values respect and integrity, customer focus, and innovation.

Furthermore, please do note that Genpact does not charge fees to process job applications and applicants are not required to pay to participate in our hiring process in any other way. Examples of such scams include purchasing a 'starter kit,' paying to apply, or purchasing equipment or training.

Local framing contractor looking to hire an experienced Framing Superintendent.

Our company specializes in both Residential (Single family- Custom homes, Production homes) Multifamily and Commercial wood framing.

Job Duties/requirements-

Supervise and run multiple job sites across a designated work area. Our work area opportunities currently range from South Colorado Springs to Central Wyoming.

Inspect and supervise job sites and work in progress to ensure completed work meets quality control, job specs, schedules, and OSHA safety standards.

Be able to multitask and manage multiple job sites at one time.

Manage Subcontract crews

Manage in-house crews/employees

Redline plans/blueprints

Quality Control/Punch outs

Create punchlists for inspections and Quality assurance.

Manage company purchased materials and equipment

Must have-Knowledge of new construction residential framing

Knowledge of new construction commercial framing

Blueprint reading

Knowledge of Osha regulations

Knowledge of local building codes

Valid drivers license

Company truck provided upon meeting qualifications

Compensation depends on experience. Bi-annual performance bonuses provided.

Use of hand tools/power tools for occasional light framing is required

Computer skills a plus, Email, Construction software etc.

Certifications-

Drivers license (required)

Telehandler (preferred, will train)

Man lift (preferred, will train)

Fall protection (preferred, will train)

OSHA (preferred, will train)

• Bachelor's degree in Physical Therapy required. Preferred: Master's or Doctorate degree in Physical Therapy.
• CO State licensure as a Physical Therapist.
• Oncology experience preferred.
• Basic Life Support (BLS) Healthcare Provider. BLS through the American Heart Association or the American Red Cross CPR for the Professional Rescuer with card in-hand before start date. BLS or CPR card must be good through sixty days of hire.

• Provides top of scope practice in direct patient care to provide various imaging and radiologic procedures
• Values a multidisciplinary team approach to achieve exceptional outcomes
• Models proficiency through precepting those new to imaging and/or UCHealth
• Welcomes new knowledge in a fast paced, innovative clinical environment
• Contributes to secure safety and quality at the point of care

• Assess and Diagnose: Conduct Comprehensive evaluations of patients' physical conditions.
• Develop and Implement Treatment Plans: Make a tangible difference as you create individualized treatment plans based on assessment findings and patient goals, utilizing a variety of therapeutic techniques.
• Educate and instruct Patients: Provide through education to patients and their families: empower them in their recovery process and promote long-term well-being.

• Performance bonus: UCHealth offers a 3-Year Incentive Bonus to recognize employee contributions to our success in quality, patient experience, organizational growth, financial goals and tenure. The bonus accumulates annually each October and is paid out in October during the third year of employment.
• Performance-based pay increase: The Annual Merit Pay Increase recognizes work performance that meets or consistently exceeds performance standards documented through UCHealth's established evaluation process and accounts for increased experience, skills and cost of living.
• Market reviews: All UCHealth positions are reviewed annually to ensure UCHealth base pay aligns with market standards. Base pay rates are adjusted as needed to stay market competitive.

• Medical, dental and vision coverage.
• Access to 24/7 mental health and well-being support for employees and dependents.
• Discounted gym memberships and fitness resources.
• Free membership.
• Voluntary benefits such as accident insurance, critical illness insurance, group legal plan, identity theft protection, pet insurance, auto and home insurance, and employee discount programs.
• Time away from work: Paid time off (PTO), paid family and medical leave (inclusive of Colorado FAMLI), leaves of absence.
  • New employees receive an initial PTO load with first paycheck.
• Employer-provided basic life and accidental death and dismemberment coverage with buy-up coverage options.
• Employer-provided short-term disability and long-term disability with a buy-up coverage option.

• 403(b) plan with employer matching contribution.
• Additional 457(b) plan may be available.
• Flexible spending accounts for health care and dependent day care; health savings account available when enrolled in high-deductible (HD) medical plan.

• UCHealth provides access to academic degrees and certificate programs to promote professional and personal growth.
  • Up to 100% of tuition, books and fees paid for by UCHealth for specific educational degrees.
  • Other programs may qualify for up to $10,000/year pre-paid by UCHealth or up to $5,250/year in the form of tuition reimbursement.
• Access to LinkedIn Learning, which offers thousands of virtual courses and seminars, and internal professional development opportunities.
• Employees have access to free assistance navigating the Public Service Loan Forgiveness program and submitting their federal student loans for forgiveness.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.

Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.

Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date

Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 2nd & 3rd
Compensation: $28.75 /hr
Sign-On Bonus: $7,000

Benefits Information

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts
• Principal Accountabilities
• Required Qualifications
• Preferred Qualifications

Principal Accountabilities

• This role involves physical activity in a food processing environment, which generally requires a moderate amount of exertion on a fairly regular basis-involving bending, stooping, squatting, twisting, reaching, working on irregular surfaces, occasional lifting of objects weighing more than 50 pounds and frequent lifting of 10-25 pounds. Walking or standing for extended periods of time will be required as well as the occasional use of stairs and/or ladders
• The work may also involve other exertions, conditions or exposures (e.g. heat, cold, dust). This position is regularly exposed to wet and/or humid conditions with slippery surfaces, moving mechanical parts and fast paced warm/cool environments. Personal protective equipment use is required in all areas of the facility
• Execution of automation solutions used for controlling plant process. Will involve design and configuration of control systems and oversight of electrical and instrumentation functions related to projects. Will be required to obtain knowledge of plant processes
• Design and Implement control strategies based on current best practice standards and approved components
• Work with fix/support team to identify areas in need of improvement and reliability. Provide training for completed projects
• This position requires availability for a 6 day work week

Required Qualifications

• Must be eligible to work in the United States without the need of a Visa sponsorship
• Must be 18 years of age or older
• Knowledge of PLC/HMI/Controls programming languages
• Ability to update and troubleshoot a range of electrical or instrumentation systems
• Ability to read and analyze electrical schematics
• Strong communication and organizational skills
• Ability to work well in a team or individual environment and be a self-starter
• Ability to pass an Electrical Aptitude Test
• Ability to read, write, and speak English

Preferred Qualifications

• Previous Cargill Experience
• Ability to understand continuous and batch process control strategies
• Possess a working understanding of the production process
• Ability to configure and program a variety of control systems including PLC and HMI systems
• Knowledge of reliability centered maintenance, planning and scheduling
• Automation, Electrical, and / or Instrumentation experience with Allen-Bradley and Siemens
• Design and implementation knowledge of plant digital business technologies

Please note that this position does not include relocation reimbursement

Equal Opportunity Employer, including Disability/Vet

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.

Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.

Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date

Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 2nd & 3rd
Compensation: $28.75 /hr
Sign-On Bonus: $7,000

Benefits Information

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts
• Principal Accountabilities
• Required Qualifications
• Preferred Qualifications

Principal Accountabilities

• This role involves physical activity in a food processing environment, which generally requires a moderate amount of exertion on a fairly regular basis-involving bending, stooping, squatting, twisting, reaching, working on irregular surfaces, occasional lifting of objects weighing more than 50 pounds and frequent lifting of 10-25 pounds. Walking or standing for extended periods of time will be required as well as the occasional use of stairs and/or ladders
• The work may also involve other exertions, conditions or exposures (e.g. heat, cold, dust). This position is regularly exposed to wet and/or humid conditions with slippery surfaces, moving mechanical parts and fast paced warm/cool environments. Personal protective equipment use is required in all areas of the facility
• Execution of automation solutions used for controlling plant process. Will involve design and configuration of control systems and oversight of electrical and instrumentation functions related to projects. Will be required to obtain knowledge of plant processes
• Design and Implement control strategies based on current best practice standards and approved components
• Work with fix/support team to identify areas in need of improvement and reliability. Provide training for completed projects
• This position requires availability for a 6 day work week

Required Qualifications

• Must be eligible to work in the United States without the need of a Visa sponsorship
• Must be 18 years of age or older
• Knowledge of PLC/HMI/Controls programming languages
• Ability to update and troubleshoot a range of electrical or instrumentation systems
• Ability to read and analyze electrical schematics
• Strong communication and organizational skills
• Ability to work well in a team or individual environment and be a self-starter
• Ability to pass an Electrical Aptitude Test
• Ability to read, write, and speak English

Preferred Qualifications

• Previous Cargill Experience
• Ability to understand continuous and batch process control strategies
• Possess a working understanding of the production process
• Ability to configure and program a variety of control systems including PLC and HMI systems
• Knowledge of reliability centered maintenance, planning and scheduling
• Automation, Electrical, and / or Instrumentation experience with Allen-Bradley and Siemens
• Design and implementation knowledge of plant digital business technologies

Please note that this position does not include relocation reimbursement

Equal Opportunity Employer, including Disability/Vet

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.

Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.

Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date

Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 2nd & 3rd
Compensation: $28.75 /hr
Sign-On Bonus: $7,000

Benefits Information

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts
• Principal Accountabilities
• Required Qualifications
• Preferred Qualifications

Principal Accountabilities

• This role involves physical activity in a food processing environment, which generally requires a moderate amount of exertion on a fairly regular basis-involving bending, stooping, squatting, twisting, reaching, working on irregular surfaces, occasional lifting of objects weighing more than 50 pounds and frequent lifting of 10-25 pounds. Walking or standing for extended periods of time will be required as well as the occasional use of stairs and/or ladders
• The work may also involve other exertions, conditions or exposures (e.g. heat, cold, dust). This position is regularly exposed to wet and/or humid conditions with slippery surfaces, moving mechanical parts and fast paced warm/cool environments. Personal protective equipment use is required in all areas of the facility
• Execution of automation solutions used for controlling plant process. Will involve design and configuration of control systems and oversight of electrical and instrumentation functions related to projects. Will be required to obtain knowledge of plant processes
• Design and Implement control strategies based on current best practice standards and approved components
• Work with fix/support team to identify areas in need of improvement and reliability. Provide training for completed projects
• This position requires availability for a 6 day work week

Required Qualifications

• Must be eligible to work in the United States without the need of a Visa sponsorship
• Must be 18 years of age or older
• Knowledge of PLC/HMI/Controls programming languages
• Ability to update and troubleshoot a range of electrical or instrumentation systems
• Ability to read and analyze electrical schematics
• Strong communication and organizational skills
• Ability to work well in a team or individual environment and be a self-starter
• Ability to pass an Electrical Aptitude Test
• Ability to read, write, and speak English

Preferred Qualifications

• Previous Cargill Experience
• Ability to understand continuous and batch process control strategies
• Possess a working understanding of the production process
• Ability to configure and program a variety of control systems including PLC and HMI systems
• Knowledge of reliability centered maintenance, planning and scheduling
• Automation, Electrical, and / or Instrumentation experience with Allen-Bradley and Siemens
• Design and implementation knowledge of plant digital business technologies

Please note that this position does not include relocation reimbursement

Equal Opportunity Employer, including Disability/Vet