Engineering Jobs in Wi United States, WI

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Columbus, WI

SUMMARY: Primary responsibility is monitoring and measuring process and product performance, establishing and implementing recommendations for improvements to both product and process, and ensure optimal production of the various products produced by American Packaging.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Analyze processes and products using statistical techniques, to identify improvement opportunities, and measure process/product performance to ensure continual improvement.
• Participate with the gathering of information needed to establish process conditions for new and developing products and processes. This involves observing trials/developmental orders and production runs, and communicating with the manufacturing, scheduling, sales, graphics, and supplier team members.
• Ownership of CI projects as assigned. Lead projects, provide data and set up projects to achieve CI goals.
• Organize and lead process and product improvement teams/initiatives, using established project management techniques, to improve product quality and process performance and lead the implementation of those improvements.
• Ensure that manufacturing specifications are known, understood, and communicated.
• Provide engineering expertise as needed.
• Analyze production and test data to establish consistent production results.
• Utilize data to recommend design changes to correct/resolve problems and contribute to the optimization of products to the required technological specifications or end uses.
• Ability to work and communicate with all levels of the organization as required. This will range from hourly production employee up to and including the Operations Director.
• Work schedule must be flexible to allow for attendance at trials/production during nights and/or weekends if necessary.
• RCCA of both Customer and Internal quality findings
• Travel as needed to suppliers and/or customers.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Associate's degree (A. A.) or equivalent from two-year college or technical school; with two years related experience and/or training; or equivalent combination of education and experience. Packaging converting experience is highly desirable. Knowledge of testing performed in a converting operation and knowledge of statistics and the ability to apply and interpret statistic to a manufacturing situation is desired. Project management experience is preferred.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Understand and apply statistical techniques for process improvement. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. While doing inventory you stand, climb, stoop frequently. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

Are you a mechanical engineer who enjoys solving real-world problems, working hands-on with products, and contributing to designs that improve safety and performance? Join Rite-Hite's engineering team and help evolve our industry-leading vehicle restraint systems - including our flagship Dok-Lok product line.

This role offers a mix of product design, problem solving, and project-based work, with opportunities to contribute across product improvements, cost initiatives, and new development efforts as our roadmap evolves.

• Design and develop mechanical and structural components for vehicle restraint systems and related products

• Create and modify 3D models, assemblies, and drawings using SolidWorks (or similar CAD tools)

• Support product changes, enhancements, and new development projects across the product lifecycle

• Collaborate with product management, manufacturing, supply chain, and testing teams to bring designs from concept through release

• Select materials and components with consideration for performance, cost, and manufacturability

• Participate in prototype builds, testing, and validation activities to ensure designs meet real-world requirements

• Contribute to continuous improvement initiatives, including cost reduction (VAVE) and design optimization

• Own small engineering projects or workstreams, helping drive progress from problem definition to solution

• Bachelor's degree in Mechanical Engineering or a related field

• 2-3 years of post-graduation engineering experience in product design, development, or project-based engineering work

• Hands-on experience designing metal components and fabricated parts (e.g., machined parts, structural components, weldments, brackets)

• Proficiency in 3D CAD (SolidWorks preferred; Creo or similar acceptable)

• Experience working on cross-functional engineering projects - beyond routine ECN-only work

• Strong problem-solving skills and a practical, detail-oriented engineering mindset

• Ability to communicate effectively and collaborate across disciplines

• Experience with moving or mechanical systems (e.g., mechanisms, linkages, actuators, rotating components)

• Exposure to new product development (NPD), VAVE, or stage-based project workflows

• Experience with testing, validation, test plans, or tools such as DFMEA/FMEA

• Familiarity with electromechanical systems or working alongside electrical engineers

• Work hands-on with physical products in an R&D and test lab environment

• Contribute to a mature but evolving product line with a clear roadmap and room for innovation

• Be part of a flexible, collaborative engineering team where responsibilities may vary year to year

• Gain exposure to a range of engineering work - from product improvements to early concept support - depending on business needs

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Atain is an admitted and non-admitted property and casualty insurance company dedicated to serving niche programs and excess & surplus (E&S) markets. Licensed in 50 states, Atain underwrites numerous lines of business including professional liability, general liability and commercial multi-peril risks. This structure provides maximum flexibility in responding to business opportunities as they arise.

We pride ourselves on our strong financial growth, stability, industry-leading expertise and proven record of creating flexible and customizable products. This is why A.M. Best affirmed Atain with an “A” (Excellent) Financial Strength Rating.  Atain is part of the H.W. Kaufman Group family of companies, which comprises a vast network of over 60 offices across the globe. From brokerage, underwriting, premium financing and real estate, to claims and loss control, together we are shaping the future of insurance.

Equal Opportunity Employer

The H.W. Kaufman Group of companies is an equal opportunity employer. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, gender, gender identity, age, national origin, disability, veteran status, marital status, pregnancy, sexual orientation, genetic information or any other status or condition protected by the laws or regulations in the locations where we operate.

In addition, Kaufman will make reasonable accommodations to known physical or mental limitations of an otherwise qualified person with a disability, unless the accommodation would impose an undue hardship on the operation of our business.

• Investigate, analyze, strategize, adjust loss/expense reserves and effectively manage claims and litigation involving bodily injury, property damage, professional liability, and D&O to achieve the best possible outcome
• Provide counsel and take action on coverage issues, factual developments, liability exposure, loss/expense reserves, and settlement opportunities
• Provide outstanding customer service to our policy holders, business partners, claimants, and teammates throughout the organization
• Attend mediation hearings and settlement conferences, when appropriate
• Review insurance policies, and prepare reservation of rights and/or declination letters, as necessary
• Support highly successful and growing claims team
• Additional duties may be assigned

• Minimum 3-4 years of insurance defense experience and/or insurance coverage experience preferred
• Strong work ethic, excellent analytical skills, and high energy
• Must be committed to education, learning the law of numerous jurisdictions, team work, and the financial success of our organization
• Solid computer skills, including competence with Microsoft Outlook, Word, and Excel
• Commitment to exemplary customer service
• Ability to travel

Education/License

• J.D. degree from an accredited law school
• Active law license in good standing from at least one state

Benefits

• Employer paid continuing education courses and designations via access to Kaufman Institute
• Health and welfare benefits including medical, vision and dental
• 401K with employer match
• Paid vacation, sick time, and holidays
• Access to Kaufman Wellness Program
• Flexible and hybrid work options

Shift Details:

• Monday – Thursday: 5:15 AM – 3:30 PM (sometimes up to 4:00 PM)
• Friday: Overtime day (typically 3 out of 4 Fridays per month)
• Friday Shift: 5:15 AM – 2:00 PM
• No Saturday or Sunday work

Job Summary

We are seeking an experienced Production Supervisor / Line Lead to oversee up to three production lines, ensuring efficient operations, high product quality, and adherence to safety standards. The ideal candidate will provide strong leadership to production teams while driving continuous improvement initiatives within a lean manufacturing environment.

Key Responsibilities

• Supervise and manage up to three production lines, each supported by assigned line leads.
• Ensure production targets, quality standards, and safety requirements are consistently met.
• Monitor daily production performance and implement improvements when needed.
• Maintain accurate timekeeping and employee timecards.
• Lead and motivate production teams while maintaining accountability for goals and performance.
• Utilize Microsoft Excel to track production data, enter formulas, and analyze performance metrics.
• Ensure compliance with company policies, quality standards, and workplace safety regulations.
• Support continuous improvement initiatives using Lean Manufacturing principles.

Required Qualifications

• Experience in production supervision or manufacturing leadership roles.
• Strong Microsoft Excel skills (data entry, formulas, production tracking).
• Proven leadership and team management abilities.
• Experience with Lean Manufacturing methodologies such as:
• 8D Problem Solving
• 5 Why Analysis
• Kaizen / Continuous Improvement
• Strong focus on production quality, efficiency, and workplace safety.
• Excellent organizational and time management skills.

Preferred Skills

• Experience managing multiple production lines.
• Strong communication and problem-solving abilities.
• Ability to work in a fast-paced manufacturing environment.

We are seeking a talented individual to support new product development for high current and voltage power conversion and Motor Control Center products. This role offers an opportunity to work in the vibrant city of Milwaukee, WI, known for its rich history, cultural attractions, and thriving industrial sector.

The successful candidate will be responsible for creating and updating CAD drawings from engineering sketches or notes, suggesting design improvements for manufacturability, ensuring drawings meet project standards, and maintaining ECN/ECR documentation following established procedures. This position involves working closely with engineers and peers to exchange and present information, while reporting to the local Development Engineering Manager. The role also includes overseeing the application, conception, creation, release, and support for industrial power control products, ensuring they meet company and industry standards for quality, safety, and reliability, all while optimizing cost and manufacturability.

Key Responsibilities:

• Develop CAD drawings and collaborate with a team on design activities.
• Participate in new product development for high current and voltage power conversion and Motor Control Center products.
• Ensure all drawings meet project standards and maintain ECN/ECR documentation.
• Work with engineers and project managers to present and exchange information.

Qualifications:

• Minimum of 3 years of relevant mechanical CAD software (CREO, Pro/E, AutoCAD) design experience.
• Proficient in manipulating large assemblies (>200 components).
• Ability to read and interpret engineering drawings and documentation.
• Experience with power distribution equipment for 240-690V AC systems.
• Pro-E CAD modeling experience.
• SAP software experience.
• A working knowledge of production part processes: sheet-metal, plastic forming, and machining manufacturing methods.

This role owns the financial operations of the business and supports sales execution so momentum, cash flow, and client confidence are never constrained by the founder.

You operate as a trusted proxy for the founder, with real authority over financial execution, revenue operations, and client follow-through. If it touches money, forecasting, invoicing, payroll, or sales follow-up, you own it.

This is a role for someone who brings judgment, professionalism, and calm authority, not someone waiting for direction.

Primary Responsibilities:

1. Financial Ownership & P&L Visibility (Primary)

You fully own day-to-day financial operations and clarity, including:

• End-to-end ownership of P&L accuracy and visibility
• Payroll execution and review
• Accounts payable and vendor payments
• Invoicing, accounts receivable, and payment follow-up
• Credit card and expense reconciliation
• Management of the accounting inbox and all financial communications
• Reducing outsourced accounting work by 80%+ through internal ownership
• Designing and enforcing clean, repeatable client onboarding and invoicing processes
• PO creation and follow-up to ensure engineering work starts without delay

The founder does not monitor QuickBooks, AR/AP, payroll, or invoice status.

2. Project Accounting, Forecasting & Cash Control

You ensure financial reality is always visible, current, and actionable.

This includes:

• Project-level financial tracking
• Revenue and cash flow forecasting
• Clear visibility into:
• When revenue is expected
• When cash is received
• Where timing, scope, or margin is drifting
• Surfacing risk early—before it becomes disruptive
• Providing clean inputs to support hiring, spending, and delivery decisions

This role exists to keep the business on offense, not reacting late.

3. Sales Execution Support & Revenue Operations

You support sales by ensuring nothing stalls due to lack of follow-up, organization, or discipline.

This includes:

• Owning inbound lead follow-up from website and HubSpot
• Prompt, professional calling and emailing of warm leads
• Ensuring every lead and deal has a clear next action
• Booking meetings without founder coordination
• Maintaining CRM discipline with zero stale deals
• Supporting phone and inbox management related to sales follow-up
• Coordinating with marketing, HubSpot workflows, and WordPress as needed

You are not the closer.

You ensure closers stay focused, prepared, and unblocked.

4. Client Experience & Professional Representation (Non-Negotiable)

You own the client journey from first contact through billing and project kickoff.

This includes:

• Managing onboarding from PO through project start
• Sending and tracking W-9s, ACH/wire details, intake forms, and onboarding materials
• Setting clear expectations around billing, milestones, and payment timing
• Acting as the primary point of contact for billing clarity and follow-through
• Ensuring a clean handoff from Sales to Engineering and Operations

This is a client-facing role.

Professionalism, clarity, confidence, and consistency are required.

Clients should consistently feel:

• Trust
• Control
• Competence

Every interaction matters.

Tools & Systems

• QuickBooks (P&L, invoicing, AP/AR, project accounting)
• HubSpot (CRM, pipelines, dashboards, follow-ups)
• Microsoft 365 (Outlook, Teams, OneDrive)
• ADP (Payroll – training provided)
• Calendly
• AI tools including ChatGPT, , Fireflies, and Zapier

Required Experience & Profile

This role is for someone with ownership-level experience, not support-only exposure.

Required:

• 2–10 years of experience in one or more of:
• Finance Operations
• Revenue Operations
• Accounting or Controller support
• Client Operations
• Sales Operations
• Experience working closely with a founder or senior executive
• Proven comfort owning money, follow-up, and decisions
• Hands-on experience with:
• Invoicing, AR, and AP
• Financial operations and reporting
• CRM systems (HubSpot preferred)
• Strong written and verbal communication
• Calm, professional presence in client and vendor conversations
• Ability to exercise judgment without constant escalation

Preferred:

• Degree in Business, Finance, Accounting, Operations, or related field
• Experience in manufacturing, engineering, or project-based businesses
• Experience representing a company in financial or client-facing discussions

What This Role Is Not

• Not an administrative-only role
• Not calendar management as a primary function
• Not a “wait for instructions” position

This role requires ownership, discretion, and polish.

Success Looks Like

• The founder trusts the numbers without hesitation
• Financial risk is visible early
• Clients experience clean, professional follow-through
• Sales momentum is supported without founder involvement
• The business runs cleaner, calmer, and faster

Job Title: Tractor Test Driver & Quality Inspector

Location: Racine, Wisconsin (WI)

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

Manufacturing Engineer – Hands-On Operations Focus

Position Overview

We are looking for a mechanically inclined Manufacturing Engineer who thrives on the production floor and isn’t afraid to roll up their sleeves. This is not a desk-only engineering role. The right person will be equally comfortable analyzing data and physically working alongside maintenance and production teams to solve equipment, tooling, and process challenges in real time.

This role plays a key part in driving capital projects, strengthening plastics processing performance, improving automation reliability, and enhancing overall plant efficiency. Success in this position requires practical mechanical ability, strong troubleshooting skills, and a proactive, get-it-done mindset.

What You’ll Be Responsible For

• Lead capital equipment and infrastructure projects from concept through implementation.
• Spend significant time on the production floor supporting molding and automation systems.
• Diagnose and resolve mechanical, tooling, and automation issues hands-on.
• Work directly with maintenance and operations teams to improve equipment uptime and reliability.
• Identify root causes of process failures and implement permanent corrective actions.
• Drive safety, productivity, and cost-improvement initiatives.
• Coordinate timelines, milestones, and cross-functional communication for engineering projects.
• Support tooling improvements, machine modifications, and equipment upgrades as needed.

What We’re Looking For

• Bachelor’s degree in Engineering, Manufacturing Technology, Packaging, or a related technical field.
• Minimum 4 years of engineering experience within a manufacturing environment, preferably plastics processing.
• Demonstrated experience managing capital or process improvement projects.
• Strong mechanical background — capable of physically troubleshooting equipment and working directly on machinery when needed.
• Ability to read prints, understand mechanical systems, and collaborate closely with maintenance.
• Comfortable working in a fast-paced production setting rather than a purely office-based environment.

Additional Experience That’s a Plus

• Experience in injection molding operations.
• Lean Manufacturing, Six Sigma (Green/Black Belt), or PMP certification.
• Familiarity with CAD tools such as SolidWorks or AutoCAD.
• Background in automation systems troubleshooting.

Why Join Us

We are a stable, growth-oriented manufacturer with decades of industry experience and a strong commitment to operational excellence. Our culture values collaboration, accountability, and continuous improvement — and we support the people who drive our success.

We offer a competitive benefits package including:

• Medical, dental, and vision coverage
• 401(k) with company match
• Paid time off and holidays
• Employee wellness programs

Job Title: Industrial Engineer

Location: Appleton, WI

Job Type: Full-Time

Job Description:

We are seeking an experienced Industrial Engineer to support manufacturing and assembly operations with a strong focus on Lean principles, process optimization, and continuous improvement. The ideal candidate will have hands-on experience in time studies, line balancing, value stream mapping, and root cause analysis within an assembly or manufacturing environment.

Key Responsibilities:

• Study assembly lines and manufacturing processes to identify improvement opportunities using Lean principles.
• Perform time studies and line balancing, including elemental breakdowns, video time studies, VA/NVA/RNVA analysis, and Muri analysis.
• Develop current-state and future-state line balancing models.
• Create Value Stream Maps (VSM) to identify bottlenecks, waste, inefficiencies, and conduct capacity analysis.
• Establish current baselines and define future-state improvements.
• Identify productivity and process improvement opportunities and provide Level 1, 2, and 3 improvement recommendations with a detailed roadmap.
• Develop and update standard work instructions and video-based work instructions.
• Perform root cause analysis for quality issues, defects, downtime, and support corrective actions through Kaizen and continuous improvement initiatives.
• Assist in fixture design and process support as required.

Job Summary
Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. "

Essential Functions:

• 
  
  
• Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies.
  
  
• Collaborate and review suggested design improvements with Automation Engineer Design Team
  
  
• Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality
  
  
• Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault
  
  
• Use AB software to create/modify and update machine Programmable Logic Control programs as required.
  
  
• Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department.
  
  
• Possess advanced skills with vision systems and integration for quality inspections.
  
  
• Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team.
  
  
• Participate in project hand off processes that require process optimization, process flow, and assisting with training as required.
  
  
• Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings.
  
  
• Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team.
  
  
• Recommend and implement measures to improve equipment performance, quality and production methods.
  
  
• Stay current with technology and industry standards
  
  
• Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy
  
  

Other Functions

• 
  
  
• Travel could be required on a "as needed" basis
  
  
• Attend all meeting with cross-functional teams to review project work and direction
  
  
• Lend support through training and technical advice to help other technicians become more efficient.
  
  
• All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment.
  
  

Success in this role will require

• 
  
  
• Use of SolidWorks/Cad System
  
  
• Use of AB Programmable Logic Control software as required
  
  
• Six Sigma methodologies and practices
  
  
• Project management skills and creating documentation
  
  
• Ensure conformance to ASME codes as required
  
  
• Follow all IATF16949 and company standards for quality and manufacturability
  
  
• Manage and leverage resources to complete projects on time and within budget
  
  
• Vision System Integration and control
  
  
• Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements.
  
  
• Ability to effectively present information and respond to questions from groups, managers and fellow team members.
  
  
• Experience in communicating with suppliers and vendors
  
  
• Basic to advanced skills in pneumatic systems
  
  
• Advanced Programmable Logic Control knowledge
  
  

What You'll Bring

• 
  
  
• Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation.
  
  
• Ability to read and interpret documents such as technical specifications, schematics, and ladder logic
  
  
• Certified Six Sigma Green Belt is preferred
  
  
• Ability for overnight travel by air or land as needed.
  
  
• Must have a valid drivers license, with an acceptable driving record, along with adequate insurance
  
  

Rev. 9.21.2021

Title: Tooling Engineer

Reports to: Tooling Manager

Department: Tooling Engineering

Job Summary:

Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Writing purchase orders stating mold building specifications.
  
  
• Writing requests for quotations for vendors.
  
  
• Assure that vendors keep within budget and timing constraints on projects.
  
  
• Evaluate and Approve injection molding tool design.
  
  
• Assure that vendors incorporate the approved design in injection molding tool construction.
  
  
• Keep a library of tool drawings.
  
  
• Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
  
  
• Evaluate product design as to moldability and simplification for moldability.
  
  
• Assist in troubleshooting injection molding problems.
  
  
• Work with injection molding tool designs to assure the highest quality molding tools possible.
  
  
• Work with toolmakers to assure the highest quality injection molding tools possible.
  
  

Other duties assigned:

• 
  
  
• Other duties as assigned.
  
  

Qualifications:

• 
  
  
• High school diploma or equivalent.
  
  
• Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
  
  
• Prior experience with plastic injection molding process.
  
  
• Knowledge of injection molding tools and injection molding tool construction.
  
  
• Knowledge of machine tools and how machine tools relate to injection mold tool construction.
  
  
• Knowledge of manufacturing best practices.
  
  
• Excellent computer skills, including Microsoft software and CAD software.
  
  
• Organized; can meet deadlines.
  
  
• Ability to work non-standard hours to meet the needs of the customers.
  
  
• Ability to travel internationally.
  
  
• Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
  
  

#LI-KN1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary

Under the direction of the Lead Automotive Account Manager - West Coast, the SOCAL Automotive Sales Engineer is responsible for maintaining current customer relationships and identifying areas for potential growth with established and new customers in the electric vehicle market. The primary role will be serving as the key account manager for a major electric vehicle company with responsibility for several smaller accounts. The role is responsible for being the main point of contact for communication regarding product selections and opportunity generation. This position is based primarily in the SOCAL area, with travel to the West Coast region as required. This individual will work with a cross-functional team, including sales, project management, product management, and engineering, to achieve success. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Serve as the key account manager for SOCAL automotive vehicle customers.
  
  
• Coordinate and align domestically and globally for relevant opportunities as required.
  
  
• Expand HellermannTyton's position in low-voltage, high-voltage vehicle electrification systems as well as fluid routing opportunities.
  
  
• Uncover opportunities in standard, platform-based, and custom products
  
  
• Attend and lead selected customer-facing meetings to drive opportunities to specify HellermannTyton's products.
  
  
• Support overall business direction as set by automotive sales and marketing leadership with vetted information and strategic clarity to ensure key activities are moving forward.
  
  
• Work with customer engineering teams to assess standard plastic fasteners/clips for wiring harnesses and fluid routings, offer substitutions, and deliver new, improved offerings.
  
  
• Use understanding of technical drawings, documents, and automotive testing requirements to convert information into recommendations and next steps to achieve the specification.
  
  
• Understand and have full knowledge of OEM specifications for standard parts and leverage that to gain market share.
  
  
• Follow and improve process flows to enable efficient multi-stakeholder direction and understanding of key actions and commitments.
  
  
• Manage customers current and upcoming platforms and develop sales plans in line with customers goals
  
  
• Maintain familiarity with competitors' products and identify opportunities
  
  
• Effectively communicate status, actions, milestones, and activities to key stakeholders.
  
  

Other Functions:

• 
  
  
• Ability to discern opportunities and roadblocks to the goals of a project and drive results for increased sales.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• BS from an accredited four-year college or university, engineering discipline preferred, or equivalent experience in lieu of degree
  
  
• Excellent knowledge of the Microsoft Office Suite.
  
  
• 5+ years of professional experience demonstrating mechanical and engineering aptitude, along with successful key customer responsibility
  
  
• Automotive Industry Experience required
  
  
• Knowledge of plastic fasteners is preferred
  
  
• Must have a valid driver's license, acceptable driving record, and adequate insurance
  
  
• Minimal travel involved
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Title: Manufacturing Engineer

Location: Appleton, WI

Employment Type: Full-Time

Job Description & Skill Requirement:

• Study assembly lines/processes and identify areas for improvement as per lean principles.
• Perform Time Study and Line Balancing-Elemental breakdown, Video Time study–All Processes (Stations & Operator), VA/NVA/RNVA analysis, Develop Current State Line Balancing, Muri Analysis
• Develop Value Stream Mapping-Current State VSM-Identify bottlenecks, wastes and inefficiencies, Capacity analysis and Current baselining, Future State VSM, Current state vs Future state
• Identify Process and productivity improvement opportunities for entire process with Level 1,2,3 improvement suggestions report and roadmap
• Develop/ re-write Standard work instructions, Video work instructions
• Analysis of Root Cause for the quality failures, defects, downtimes etc., and support in corrective action & Kaizen / improvement identification with detailed implementation plan
• Support in Fixture design as per requirements.

Job Title: Senior Supplier Quality Engineer – Casting

Location: Fond du Lac, WI

Position Overview

• The Senior Supplier Quality Engineer (SQE) – Casting is responsible for ensuring that all direct‑purchased materials consistently meet performance and quality requirements. This role provides strategic and tactical support to manufacturing through advanced quality planning, supplier development, corrective action management, and continuous improvement initiatives. The SQE works closely with the global supply base, procurement, engineering, and manufacturing teams to prevent quality issues, eliminate production disruptions, and enhance customer satisfaction.

Key Responsibilities

1. Tactical Supplier Quality

• Manage and process PPAP submissions to support timely new product launches.
• Work independently and collaboratively with global suppliers to execute all quality‑related activities.
• Maintain effective communication with suppliers and internal stakeholders regarding quality impacts on production.
• Review and validate supplier Corrective Action submissions, ensuring root cause identification and robust preventive actions.
• Respond to internal customer inquiries promptly and professionally.
• Conduct supplier performance analyses and share insights with Procurement and Category Management teams.
• Monitor and evaluate supplier PPM performance and provide recommendations for improvement.
• Prepare and present quality performance reports to support decision‑making and continuous improvement initiatives.

2. Factory Support

• Support manufacturing by conducting or coordinating inspection/sorting of suspect or discrepant materials.
• Issue corrective actions to suppliers for non‑conforming materials and follow through to resolution.
• Demonstrate integrity, trust, and alignment with organizational values in daily activities.
• Influence and support cross‑functional teams through effective collaboration and communication.
• Drive improvement activities across the value stream through motivation and leadership.

3. Process Management

• Document rejected materials and maintain accurate MRB system records.
• Verify incoming materials against shipment documentation, engineering drawings, and specifications.
• Interpret engineering drawings, GD&T, schematics, and standards to determine product quality and reliability.
• Adhere to and uphold organizational quality standards and maintain process compliance.

4. Supplier Development

• Conduct supplier audits and provide detailed analyses, feedback, and improvement plans.
• Develop and support systems and processes to ensure long‑term supplier performance improvement.
• Address tactical supplier issues such as spills, PPAP delays, and material non‑conformances.
• Create risk‑based schedules for proactive supplier evaluations.
• Lead APQP activities for new product and part development.
• Issue and track Supplier Corrective Action Requests (SCARs).
• Collaborate effectively with Buyers, Category Managers, R&D engineers, and Plant SQEs across all functions.

Travel Requirements

• Occasional travel up to 20% (day or overnight), by car or air, for supplier visits, audits, and internal meetings.

Required Qualifications

• Bachelor’s degree in Engineering or a related technical field.
• Minimum 7 years of experience in manufacturing, operations, or quality engineering.
• Strong interpretation skills for engineering drawings and GD&T.
• Knowledge of SPC and data analysis for critical features.
• Hands‑on experience with casting and forging processes.
• Experience in aluminum casting technologies (sand, investment, high‑pressure die casting, permanent mold, cores, etc.).
• Machine shop experience and understanding of machining operations.
• Strong knowledge of quality tools and problem‑solving methodologies.

Preferred Qualifications

• 3+ years of experience in engine or engine component manufacturing or assembly.
• ASQ certifications (Quality Engineer, Quality Manager, or Auditor).
• Lean Six Sigma Green Belt or Black Belt certification with demonstrated project experience.