✓ Engineering ✕ Clear
Engineering Jobs in Usa
1,952 positions found — Page 100
M
Engineer Quality - Post Market
Salary not disclosed
Job Summary Under broad supervision, responsible for independently setting basic quality standards for both in-process while leading efforts to develop methods for testing, sampling and training.
Evaluate production process, recommend improvements, qualify and conduct vendor management, generate and maintain DMR’s, product specifications, design control files, and CE technical files.
Job Description MAJOR RESPONSIBILITIES: Manage the development and implementation of methods and procedures for process control, process validation, process improvement, testing, and inspection to ensure that products are ideal and functional.
Design experiments to understand sources of variation affecting products and processes.
Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes.
Design and perform experimental product testing and analysis to maintain quality levels and minimize defects and failure rates.
Generate and analyze reports and defective products to determine trends and lead corrective actions.
Use concepts of probability and statistical quality control to guide decisions.
Direct and collaborate with supplier representatives on quality problems, ensure corrective action implementation (CAPA, SCAR), and contribute to supplier quality improvement programs.
Lead supplier qualifications.
Provide Quality expertise in Product Development, Design Control activities, Risk Management, and CE Technical Files.
Responsible for building appropriate product documentation (e.g.
Device Master Records) in compliance with applicable regulations.
Work with Regulatory Groups and Suppliers to produce 510K submissions, letters to file, etc., as required.
Coordinate product testing with internal and external laboratories as required.
Ensure compliance with domestic and international regulations associated with product lines and processes.
Perform quality reviews of design documentation for compliance with stated requirements, including vendor quality documents and company quality records.
Lead investigations of product and process non-conformances and out-of-specification results and develop effective corrective and preventive actions (CAPA).
Education: Typically requires a Bachelor’s degree in Engineering, Science, Math or other related technical field.
Work Experience: At least 2 years of experience in the Quality or Engineering.
Knowledge / Skills / Abilities: Experience developing ways of accomplishing goals with little or no supervision, depending on oneself to complete objectives, and determining when escalation of issues is necessary.
Experience using time management skills to prioritize, organize, and track details in order to meet deadlines of multiple projects.
Experience problem solving, overcoming obstacles, and reaching a positive and successful solution through mathematical or systematic operations.
Experience using MS Office Suite products (Word, Excel, PowerPoint, Outlook ).
Intermediate Skill Level in Microsoft Excel (for example: conditional formatting, tables, formulas, charting) Working knowledge of government and industry quality assurance codes and standards (e.g.
21 CFR 820, ISO13485).
Position requires up to 15% travel.
PREFERRED JOB REQUIREMENTS: At least 2 years of industry experience in Medical Devices, Drugs, and/or fields directly related to the role.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $79,000.00
- $119,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Evaluate production process, recommend improvements, qualify and conduct vendor management, generate and maintain DMR’s, product specifications, design control files, and CE technical files.
Job Description MAJOR RESPONSIBILITIES: Manage the development and implementation of methods and procedures for process control, process validation, process improvement, testing, and inspection to ensure that products are ideal and functional.
Design experiments to understand sources of variation affecting products and processes.
Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes.
Design and perform experimental product testing and analysis to maintain quality levels and minimize defects and failure rates.
Generate and analyze reports and defective products to determine trends and lead corrective actions.
Use concepts of probability and statistical quality control to guide decisions.
Direct and collaborate with supplier representatives on quality problems, ensure corrective action implementation (CAPA, SCAR), and contribute to supplier quality improvement programs.
Lead supplier qualifications.
Provide Quality expertise in Product Development, Design Control activities, Risk Management, and CE Technical Files.
Responsible for building appropriate product documentation (e.g.
Device Master Records) in compliance with applicable regulations.
Work with Regulatory Groups and Suppliers to produce 510K submissions, letters to file, etc., as required.
Coordinate product testing with internal and external laboratories as required.
Ensure compliance with domestic and international regulations associated with product lines and processes.
Perform quality reviews of design documentation for compliance with stated requirements, including vendor quality documents and company quality records.
Lead investigations of product and process non-conformances and out-of-specification results and develop effective corrective and preventive actions (CAPA).
Education: Typically requires a Bachelor’s degree in Engineering, Science, Math or other related technical field.
Work Experience: At least 2 years of experience in the Quality or Engineering.
Knowledge / Skills / Abilities: Experience developing ways of accomplishing goals with little or no supervision, depending on oneself to complete objectives, and determining when escalation of issues is necessary.
Experience using time management skills to prioritize, organize, and track details in order to meet deadlines of multiple projects.
Experience problem solving, overcoming obstacles, and reaching a positive and successful solution through mathematical or systematic operations.
Experience using MS Office Suite products (Word, Excel, PowerPoint, Outlook ).
Intermediate Skill Level in Microsoft Excel (for example: conditional formatting, tables, formulas, charting) Working knowledge of government and industry quality assurance codes and standards (e.g.
21 CFR 820, ISO13485).
Position requires up to 15% travel.
PREFERRED JOB REQUIREMENTS: At least 2 years of industry experience in Medical Devices, Drugs, and/or fields directly related to the role.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $79,000.00
- $119,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
H
HEAT, VENTILATION AND AIR CONDITIONING (HVAC) SPECIALIST
Salary not disclosed
Department:WW Mechanical Posted on:3/6/2026 Closing on:Open Until Filled Location:2nd Street Summary Performs advanced preventive, corrective, and predictive maintenance on a wide variety of HVAC, refrigeration, boiler, and environmental control systems across Water Authority facilities.
The position monitors system performance, troubleshoots operational issues, and repairs or replaces major components including valves, motors, controls, compressors, condensers, and related mechanical and electrical equipment.
Also performs system installations, fabricates related components, reviews plans and specifications, and ensures all work is completed in accordance with safety standards, manufacturer requirements, and applicable codes.
This role supports continuous facility operations by responding to system alarms, service requests, and facility emergencies as needed.
Minimum Education and Experience High School Diploma or GED plus 5 years electronic systems installation, maintenance and repair experience.
Possession of NM State License for HVAC and/or Journeyman Refrigeration License.
Possession of Current EPA Section 608 Technician Certificate.
Experience such as described in the job description may substitute for education on a year for year basis.
Position Requirements Possess a Valid New Mexico Driver's License or a Valid Driver's License from another State converted to New Mexico within 1 month Driving Record consistent with being issued an Authority Operator Permit by Risk Management Preferred Possession of, or ability to obtain, a valid Construction Industries Division BO2 Boilers License for Low/High Pressure.
Salary Range $33.65
- $33.65 Hourly Union Blue Collar
The position monitors system performance, troubleshoots operational issues, and repairs or replaces major components including valves, motors, controls, compressors, condensers, and related mechanical and electrical equipment.
Also performs system installations, fabricates related components, reviews plans and specifications, and ensures all work is completed in accordance with safety standards, manufacturer requirements, and applicable codes.
This role supports continuous facility operations by responding to system alarms, service requests, and facility emergencies as needed.
Minimum Education and Experience High School Diploma or GED plus 5 years electronic systems installation, maintenance and repair experience.
Possession of NM State License for HVAC and/or Journeyman Refrigeration License.
Possession of Current EPA Section 608 Technician Certificate.
Experience such as described in the job description may substitute for education on a year for year basis.
Position Requirements Possess a Valid New Mexico Driver's License or a Valid Driver's License from another State converted to New Mexico within 1 month Driving Record consistent with being issued an Authority Operator Permit by Risk Management Preferred Possession of, or ability to obtain, a valid Construction Industries Division BO2 Boilers License for Low/High Pressure.
Salary Range $33.65
- $33.65 Hourly Union Blue Collar
Not Specified
N
Mid-level Process Engineer
Salary not disclosed
Overview Client is seeking a contract CX / Process Engineering professional to support enterprise transformation initiatives.
You will lead discovery and facilitation, document current-state processes and experiences, design future-state workflows, and translate findings into clear business and technical requirements to enable solutions such as automation, AI, OCR, and platform enhancements.
Core Responsibilities Lead discovery with cross-functional partners; define scope and problem framing Design and facilitate stakeholder working sessions; capture outputs and drive closure Create reusable artifacts including process maps, journey/experience documentation, requirements, and supporting documentation (RACI/SIPOC where applicable) Analyze qualitative and quantitative inputs to identify pain points, root causes, and improvement opportunities Develop future-state workflows and recommendations to improve experience, efficiency, risk posture, and cost Communicate progress, risks, and dependencies with strong documentation discipline Support adoption with change materials (impacts, communications, stakeholder readiness) Essential Qualifications, Skills, and Technologies 5+ years leading cross-functional process improvement, process engineering, and/or design thinking initiatives (client and/or employee experience) End-to-end process design and documentation (current-state and future-state) Strong facilitation and stakeholder management, including senior stakeholders Requirements writing and the ability to translate designs into implementable needs (business and technical) Analytical problem-solving and comfort working in ambiguous, complex environments Experience supporting transformation initiatives and sustaining adoption Bachelor's degree in Business, Engineering, or a related field Preferred (Nice-to-Have) Skills or Experience Financial services domain exposure Salesforce experience Loan Operations or Wealth Operations process and technical exposure Lean / Six Sigma and/or User-Centered Design certification Work Details (include only if present: schedule, location, onsite/hybrid/remote, travel, contract duration) Contract role Travel: as needed based on workshop cadence and stakeholder needs Must be able to operate a motor vehicle with a valid driver's license Physical demands include prolonged sitting, frequent PC/laptop use, and occasional lifting up to 10 lb Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
You will lead discovery and facilitation, document current-state processes and experiences, design future-state workflows, and translate findings into clear business and technical requirements to enable solutions such as automation, AI, OCR, and platform enhancements.
Core Responsibilities Lead discovery with cross-functional partners; define scope and problem framing Design and facilitate stakeholder working sessions; capture outputs and drive closure Create reusable artifacts including process maps, journey/experience documentation, requirements, and supporting documentation (RACI/SIPOC where applicable) Analyze qualitative and quantitative inputs to identify pain points, root causes, and improvement opportunities Develop future-state workflows and recommendations to improve experience, efficiency, risk posture, and cost Communicate progress, risks, and dependencies with strong documentation discipline Support adoption with change materials (impacts, communications, stakeholder readiness) Essential Qualifications, Skills, and Technologies 5+ years leading cross-functional process improvement, process engineering, and/or design thinking initiatives (client and/or employee experience) End-to-end process design and documentation (current-state and future-state) Strong facilitation and stakeholder management, including senior stakeholders Requirements writing and the ability to translate designs into implementable needs (business and technical) Analytical problem-solving and comfort working in ambiguous, complex environments Experience supporting transformation initiatives and sustaining adoption Bachelor's degree in Business, Engineering, or a related field Preferred (Nice-to-Have) Skills or Experience Financial services domain exposure Salesforce experience Loan Operations or Wealth Operations process and technical exposure Lean / Six Sigma and/or User-Centered Design certification Work Details (include only if present: schedule, location, onsite/hybrid/remote, travel, contract duration) Contract role Travel: as needed based on workshop cadence and stakeholder needs Must be able to operate a motor vehicle with a valid driver's license Physical demands include prolonged sitting, frequent PC/laptop use, and occasional lifting up to 10 lb Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Process Modeling Engineer
🏢 Nesco Resource
Salary not disclosed
Job Title: Process Modeling Engineer 100% onsite in Corning, NY Possible conversion, but no guarantee or timeframe commitment Non local candidates who are willing to relocate at their own expense are welcome Interview Process: Initial teams meeting with manager.
2nd interview will be several hour panel teams meeting where candidate will give presentation.
If candidate is within a few hours driving distance from
***, candidate will come onsite for 2nd interview.
Spotlight call to be held Tuesday, 3/3 at 2:30pm EST! Top requirements:
- Minimum of M.S in Mechanical Engineering, Civil or related discipline with 4+ years of work experience in a similar field OR a Ph.D.
in Mechanical Engineering, Civil or related discipline with 0+ years of work experience.
Chemical/Electrical engineering degrees are not suitable for this role.
Mechanical is preferred.
- Has experience in Open-Source Finite Element Analysis Software
- Solid understanding of loading conditions and strains on structures Purpose of the Position: • As a Scientist/Engineer, you are responsible for modeling of new processes and/or process conditions for improved product attributes or reduced cost for glass and/or ceramic substrates and filters.
You will be expected to develop modeling/analytical tools or utilizing existing tools to gain fundamental understanding of underlying principles.
You need a strong foundation in solid mechanics and a high level of expertise in numerical modeling.
Our team requires excellent communication and interpersonal skills for working with globally distributed researchers, engineers in our commercial organizations and customers.
Day to Day Responsibilities: • In this role, you will be responsible for modeling of new processes and/or process conditions for improved product attributes or reduced cost for glass and/or ceramic substrates and filters with an expectation of developing modeling/ analytical tools or utilizing existing tools to gain fundamental understanding of underlying principles.
• You should have a strong foundation in solid mechanics and a high level of expertise in numerical modeling.
• This position requires you to have excellent communication and interpersonal skills for working with globally distributed researchers, engineers in our commercial organizations, and customers.
Job Duties: • Utilizing thin films modeling to understand the product performance and response to various sources of lading • Utilizing modeling such as FEA and BEM for product development, designs improvements, manufacturing processes, and failure analysis • Mentorship and recommendation on new capabilities or method developments related to mechanical testing and measurements • Lead and recommend product testing pertaining to product design and performance to meet qualification requirements from commercial, engineering manufacturing.
• Engage with the businesses as needed to help with addressing thin films concerns/questions from customers and other product engineering related problems.
• Writing technical reports, invention disclosures & publications Required Years and Area of Experience: • M.S in Mechanical Engineering, Civil or related discipline with 4+ years of work experience in a similar field OR a Ph.D.
in Mechanical Engineering, Civil or related discipline with 0+ years of work experience.
Chemical/Electrical engineering degrees are not suitable for this role.
Mechanical is preferred.
Travel Requirements: • Flexibility is required.
We travel up to 10% Required Skills: • Has experience in Open-Source Finite Element Analysis Software • Understanding of advanced principles, theories, concepts and techniques in thin films interface adhesion for wide applications.
• Good knowledge of the mechanical behavior of soft materials (e.g., gels, polymers).
• Analyze problems and reduce them to mathematical models, carrying out experiments to validate models, deriving numerical and technological solutions and making recommendations • Strong mathematical and programming skills in FEA and BEM in commercial software packages (Abaqus, Ansys, etc.) Desired Skills: • Experience with structural thin film mechanics while focusing on material modeling and characterization.
• Experience with process and product engineering • Knowledgeable about various materials test techniques • Ability to lead product performance data evaluations, experiments and data analysis
- others Soft Skills: • Excellent communication skills (verbal, written, presentation) • Well-developed skills in working across multiple cultures and on a globally dispersed and diverse team • Proven ability to work on multiple projects at a time • Thorough solving problems on product or process related issues, phenomenal analytical skills Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
2nd interview will be several hour panel teams meeting where candidate will give presentation.
If candidate is within a few hours driving distance from
***, candidate will come onsite for 2nd interview.
Spotlight call to be held Tuesday, 3/3 at 2:30pm EST! Top requirements:
- Minimum of M.S in Mechanical Engineering, Civil or related discipline with 4+ years of work experience in a similar field OR a Ph.D.
in Mechanical Engineering, Civil or related discipline with 0+ years of work experience.
Chemical/Electrical engineering degrees are not suitable for this role.
Mechanical is preferred.
- Has experience in Open-Source Finite Element Analysis Software
- Solid understanding of loading conditions and strains on structures Purpose of the Position: • As a Scientist/Engineer, you are responsible for modeling of new processes and/or process conditions for improved product attributes or reduced cost for glass and/or ceramic substrates and filters.
You will be expected to develop modeling/analytical tools or utilizing existing tools to gain fundamental understanding of underlying principles.
You need a strong foundation in solid mechanics and a high level of expertise in numerical modeling.
Our team requires excellent communication and interpersonal skills for working with globally distributed researchers, engineers in our commercial organizations and customers.
Day to Day Responsibilities: • In this role, you will be responsible for modeling of new processes and/or process conditions for improved product attributes or reduced cost for glass and/or ceramic substrates and filters with an expectation of developing modeling/ analytical tools or utilizing existing tools to gain fundamental understanding of underlying principles.
• You should have a strong foundation in solid mechanics and a high level of expertise in numerical modeling.
• This position requires you to have excellent communication and interpersonal skills for working with globally distributed researchers, engineers in our commercial organizations, and customers.
Job Duties: • Utilizing thin films modeling to understand the product performance and response to various sources of lading • Utilizing modeling such as FEA and BEM for product development, designs improvements, manufacturing processes, and failure analysis • Mentorship and recommendation on new capabilities or method developments related to mechanical testing and measurements • Lead and recommend product testing pertaining to product design and performance to meet qualification requirements from commercial, engineering manufacturing.
• Engage with the businesses as needed to help with addressing thin films concerns/questions from customers and other product engineering related problems.
• Writing technical reports, invention disclosures & publications Required Years and Area of Experience: • M.S in Mechanical Engineering, Civil or related discipline with 4+ years of work experience in a similar field OR a Ph.D.
in Mechanical Engineering, Civil or related discipline with 0+ years of work experience.
Chemical/Electrical engineering degrees are not suitable for this role.
Mechanical is preferred.
Travel Requirements: • Flexibility is required.
We travel up to 10% Required Skills: • Has experience in Open-Source Finite Element Analysis Software • Understanding of advanced principles, theories, concepts and techniques in thin films interface adhesion for wide applications.
• Good knowledge of the mechanical behavior of soft materials (e.g., gels, polymers).
• Analyze problems and reduce them to mathematical models, carrying out experiments to validate models, deriving numerical and technological solutions and making recommendations • Strong mathematical and programming skills in FEA and BEM in commercial software packages (Abaqus, Ansys, etc.) Desired Skills: • Experience with structural thin film mechanics while focusing on material modeling and characterization.
• Experience with process and product engineering • Knowledgeable about various materials test techniques • Ability to lead product performance data evaluations, experiments and data analysis
- others Soft Skills: • Excellent communication skills (verbal, written, presentation) • Well-developed skills in working across multiple cultures and on a globally dispersed and diverse team • Proven ability to work on multiple projects at a time • Thorough solving problems on product or process related issues, phenomenal analytical skills Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
Not Specified
J
Video Engineer - China Lake CA
🏢 JT4 LLC
Salary not disclosed
JT4 China Lake is looking for a Video Engineer to support in accordance with Mission Control Real-Time Display Branch requirements and established government engineering processes.
The Video Engineer will integrate with existing branch engineering teams to support ongoing operations, system development, testing, and modernization efforts.
All work will be performed in alignment with government priorities and technical direction.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Range Requirements The Video Engineer support will encompass real-time video operations, including video and audio recording and display systems and pathways.
The engineer will work in collaboration with the branch's technical and engineering teams and provide technically sound advice to managers and peers on the technical aspects of system development, and may require managing small to medium-sized projects.
The engineer's assignments can range from major portions of large-scale projects to entire medium-scale ones.
They will also be responsible for developing or testing new equipment to improve the functionality of new or existing system.
Support Real-Time video operations, including video and audio recording systems, display systems, and associated signal distribution pathways.
Collaborate with Mission Control technical and engineering personnel to support system operations, sustainment, and development activities.
Provide technically sound recommendations and guidance to government managers and peers related to video and display system development, integration, and performance.
Manage and/or support small- to medium-sized projects and perform major tasking on large-scale engineering efforts as directed.
Develop, integrate, test, and evaluate new or modified equipment to improve the functionality and reliability of existing and future systems Job Summary -- Essential Functions/Duties Under close supervision, a Video Engineer performs a variety of fundamental field engineering tasks in the installation, operations, testing, and maintenance of electronic equipment and systems.
Work is at an entry level and is generally performed as a member of a project team.
Employee will be responsible for the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform fundamental engineering tasks requiring standard techniques, such as tolerance studies and design calculations Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Assist in preparation of reports, correspondence, or technical studies Perform other job-related duties, as required Requirements -- Education, Technical, and Work Experience An associate's degree in engineering or formal academic/vocational training, or military equivalent and four or more years of technical/professional experience in the specialty field are required for this position.
In addition, a Video Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform relatively routine engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Effective verbal and written communication skills Planning/organizational skills Salary The expected salary range for this position is $96,491.20 to $111,491.20 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A4CLR
The Video Engineer will integrate with existing branch engineering teams to support ongoing operations, system development, testing, and modernization efforts.
All work will be performed in alignment with government priorities and technical direction.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Range Requirements The Video Engineer support will encompass real-time video operations, including video and audio recording and display systems and pathways.
The engineer will work in collaboration with the branch's technical and engineering teams and provide technically sound advice to managers and peers on the technical aspects of system development, and may require managing small to medium-sized projects.
The engineer's assignments can range from major portions of large-scale projects to entire medium-scale ones.
They will also be responsible for developing or testing new equipment to improve the functionality of new or existing system.
Support Real-Time video operations, including video and audio recording systems, display systems, and associated signal distribution pathways.
Collaborate with Mission Control technical and engineering personnel to support system operations, sustainment, and development activities.
Provide technically sound recommendations and guidance to government managers and peers related to video and display system development, integration, and performance.
Manage and/or support small- to medium-sized projects and perform major tasking on large-scale engineering efforts as directed.
Develop, integrate, test, and evaluate new or modified equipment to improve the functionality and reliability of existing and future systems Job Summary -- Essential Functions/Duties Under close supervision, a Video Engineer performs a variety of fundamental field engineering tasks in the installation, operations, testing, and maintenance of electronic equipment and systems.
Work is at an entry level and is generally performed as a member of a project team.
Employee will be responsible for the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform fundamental engineering tasks requiring standard techniques, such as tolerance studies and design calculations Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Assist in preparation of reports, correspondence, or technical studies Perform other job-related duties, as required Requirements -- Education, Technical, and Work Experience An associate's degree in engineering or formal academic/vocational training, or military equivalent and four or more years of technical/professional experience in the specialty field are required for this position.
In addition, a Video Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform relatively routine engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Effective verbal and written communication skills Planning/organizational skills Salary The expected salary range for this position is $96,491.20 to $111,491.20 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A4CLR
Not Specified
M
Engineer Supplier Quality
🏢 Medline Industries - Transportation & Operations
Salary not disclosed
Job Summary Support Medline’s Supplier Quality operations by executing supplier qualification, monitoring, and performance activities for a global supply base.
This role assists with supplier assessments, documentation review, audits, and issue resolution to ensure compliance with FDA regulations, ISO standards, and internal quality system requirements.
The position partners cross functionally while developing foundational expertise in supplier quality and regulatory compliance.
Job Description MAJOR RESPONSIBILITIES Conduct supplier audits to verify compliance with ISO 9001, ISO 13485, and applicable regulatory requirements related to high-risk vendors.
Support supplier qualification, re‑qualification, and disqualification activities for moderate to high‑risk suppliers, including documentation review and approval routing.
Review and approve supplier quality records and compliance documentation in accordance with internal procedures.
Execute Supplier Corrective Action Requests (SCARs) by tracking actions, verifying evidence, and documenting effectiveness under supervision.
Assist with supplier communication related to quality requirements, documentation requests, and corrective actions to Medline’s internal business partners and external suppliers Provide technical guidance and training to suppliers on quality standards and best practices.
Support containment activities and investigations related to supplier nonconformances Utilize root cause analysis and risk management tools to prevent recurrence of issues.
Maintain accurate and timely records of supplier audits, performance reviews, nonconformances, and corrective actions.
Prepare routine reports, dashboards, and summaries for supplier quality performance and compliance tracking.
MINIMUM JOB REQUIREMENTS Education Bachelor’s degree in Engineering, Biology, Quality Management, or related field.
Certification / Licensure Work Experience 3–5 years in supplier quality, manufacturing quality, or similar role.
Knowledge / Skills / Abilities Knowledge of ISO standards, FDA regulations (if applicable), statistical process control (SPC), and quality tools (FMEA, PPAP, APQP).
Strong communication, problem-solving, and negotiation skills.
Medical Device or drug experience Travel up to 25% (domestic and/or international) PREFERRED JOB REQUIREMENTS Education Certification / Licensure ASQ Certified Quality Engineer (CQE) or Certified Supplier Quality Professional.
Six Sigma Green Belt or higher.
Work Experience Supplier quality auditing Audit hosting experience Knowledge / Skills / Abilities DISCLAIMER All duties and requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
This position description in no way states or implies that these are the only duties to be performed by an employee occupying this position.
Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor(s)/manager(s).
This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $92,000.00
- $138,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
This role assists with supplier assessments, documentation review, audits, and issue resolution to ensure compliance with FDA regulations, ISO standards, and internal quality system requirements.
The position partners cross functionally while developing foundational expertise in supplier quality and regulatory compliance.
Job Description MAJOR RESPONSIBILITIES Conduct supplier audits to verify compliance with ISO 9001, ISO 13485, and applicable regulatory requirements related to high-risk vendors.
Support supplier qualification, re‑qualification, and disqualification activities for moderate to high‑risk suppliers, including documentation review and approval routing.
Review and approve supplier quality records and compliance documentation in accordance with internal procedures.
Execute Supplier Corrective Action Requests (SCARs) by tracking actions, verifying evidence, and documenting effectiveness under supervision.
Assist with supplier communication related to quality requirements, documentation requests, and corrective actions to Medline’s internal business partners and external suppliers Provide technical guidance and training to suppliers on quality standards and best practices.
Support containment activities and investigations related to supplier nonconformances Utilize root cause analysis and risk management tools to prevent recurrence of issues.
Maintain accurate and timely records of supplier audits, performance reviews, nonconformances, and corrective actions.
Prepare routine reports, dashboards, and summaries for supplier quality performance and compliance tracking.
MINIMUM JOB REQUIREMENTS Education Bachelor’s degree in Engineering, Biology, Quality Management, or related field.
Certification / Licensure Work Experience 3–5 years in supplier quality, manufacturing quality, or similar role.
Knowledge / Skills / Abilities Knowledge of ISO standards, FDA regulations (if applicable), statistical process control (SPC), and quality tools (FMEA, PPAP, APQP).
Strong communication, problem-solving, and negotiation skills.
Medical Device or drug experience Travel up to 25% (domestic and/or international) PREFERRED JOB REQUIREMENTS Education Certification / Licensure ASQ Certified Quality Engineer (CQE) or Certified Supplier Quality Professional.
Six Sigma Green Belt or higher.
Work Experience Supplier quality auditing Audit hosting experience Knowledge / Skills / Abilities DISCLAIMER All duties and requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
This position description in no way states or implies that these are the only duties to be performed by an employee occupying this position.
Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor(s)/manager(s).
This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $92,000.00
- $138,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
N
R&D Engineering
🏢 Nesco Resource
Salary not disclosed
Title: R&D Component Engineer Workplace Type: Onsite 100% About This Role: This is an exciting opportunity for a well-rounded engineer to join a small team supporting a recently acquired medical device startup.
The R&D Component Engineer I will be a key member of the engineering team, partnering with representatives from R&D, Quality, Supply Chain, and Production.
This position is responsible for evaluating and dispositioning mechanical components used in the manufacturing scale up of Integrity Orthopaedic, Inc products.
The R&D Component Engineer I acts as the technical bridge between design, procurement, and manufacturing, ensuring every mechanical part that goes into the instruments will be functional, reliable, compliant, and cost-effective.
In all actions, the R&D Component Engineer I shall demonstrate a primary commitment to patient safety and product quality by maintaining compliance to the Quality Policy and all other documented processes and procedures.
Your Responsibilities Will Include: • Evaluating and approving parts to ensure compliance with requirements • Inspect, analyze, potentially rework, review, test and disposition components to ensure functionality • Perform both design and project tasks related to the inspection, testing, and production support of implantable orthopedic devices and associated non-implantable delivery instruments • Assist in research and development of new components, assemblies, and processes to support product development and continuation activities • Perform dimensional, strength of materials, mechanism movement, and/or manufacturability analysis • Generate test methods and protocols, perform tests, analyze data, generate reports for product verification, and present findings as needed to cross-functional stakeholders • Create and support documentation activities including, but not limited to: drawings and specifications for piece parts and assemblies; generate change orders to existing documents; review documentation generated by others related to product responsibilities; actively participate in design reviews; document the appropriate development and manufacturing practices per quality system or internal requirements; and verify all final design documentation, parts lists, and drawings to ensure compliance and accuracy • Perform various product engineering tasks as necessary to support R&D and operations • Communicate updates to the program manager and other various cross-functional team members as it relates to task completion and schedule adherence relative to overall business goals and objectives • Evaluate and solve technical challenges either individually or as part of a team by: collaborating cross-functionally to troubleshoot issues and implement solutions; actively participating in problem solving sessions and/or brainstorming; systemically and logically working through issues using personal skills/experience and/or pulling in resources as needed; and designing and conducting experimental testing to appropriately characterize and evaluate solutions • Participate in engineering meetings, technical working groups, and project management discussions • Assist in the building, prototyping, modifying, and testing of engineering components • Assist with prototyping, assembling, characterizing, validating inspection processes, rework instructions, and/or test methods • Follow safety protocols, quality SOP's, and regulatory requirements in all tasks and activities • Comply with applicable design-related standards published by external regulatory bodies • Properly document activities in accordance with best engineering practices, company procedures, and regulatory requirements • Perform other duties as needed and assigned Minimum Qualifications • Bachelor's degree in engineering (Mechanical, Manufacturing, Industrial, Biomedical, or technical equivalent) with 0-3 years of related work experience or an equivalent combination • Hands-on experience in metrology and familiarity with metrological equipment • Experience in the use of analytical methods including statistics, DOE, and associated SW tools (Minitab) • Strong problem-solving skills, attention to detail, and the ability to work both independently and as a team • Self-starter with proven ability to successfully work with minimal supervision • Desire to learn and meaningfully contribute to the team • Good teamwork and interpersonal skills • Good written and verbal communication • Ability to multitask, prioritize, and meet project deadlines with high attention to detail Preferred Qualifications • Hands-on experience with prototyping tools (3D printing, hand and/or power tools, manual and/or CNC machining, etc.), measurement tools (Keyence, Micro-Vu), and mechanical testing equipment • Working knowledge of current CAD tools, SolidWorks experience preferred • Experience working within an ISO certified or FDA registered work environment • Familiarity with medical device quality systems and regulations • Demonstrated cross-functional teamwork in technically demanding environment • Strong bias for action and ability to shift as needed to support changing business needs Other • Ability to lift up to 30 pounds • Must be able to wear clean room clothing and work in a cleanroom environment as needed Interview Process • Teams interview with hiring manager • Onsite tour of facility, meeting with some team members Top 3 Skills 1.
Inspection experience 2.
Qualification experience 3.
Evaluation for disposition for components experience Equipment • Laser scanning • Micro View Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
The R&D Component Engineer I will be a key member of the engineering team, partnering with representatives from R&D, Quality, Supply Chain, and Production.
This position is responsible for evaluating and dispositioning mechanical components used in the manufacturing scale up of Integrity Orthopaedic, Inc products.
The R&D Component Engineer I acts as the technical bridge between design, procurement, and manufacturing, ensuring every mechanical part that goes into the instruments will be functional, reliable, compliant, and cost-effective.
In all actions, the R&D Component Engineer I shall demonstrate a primary commitment to patient safety and product quality by maintaining compliance to the Quality Policy and all other documented processes and procedures.
Your Responsibilities Will Include: • Evaluating and approving parts to ensure compliance with requirements • Inspect, analyze, potentially rework, review, test and disposition components to ensure functionality • Perform both design and project tasks related to the inspection, testing, and production support of implantable orthopedic devices and associated non-implantable delivery instruments • Assist in research and development of new components, assemblies, and processes to support product development and continuation activities • Perform dimensional, strength of materials, mechanism movement, and/or manufacturability analysis • Generate test methods and protocols, perform tests, analyze data, generate reports for product verification, and present findings as needed to cross-functional stakeholders • Create and support documentation activities including, but not limited to: drawings and specifications for piece parts and assemblies; generate change orders to existing documents; review documentation generated by others related to product responsibilities; actively participate in design reviews; document the appropriate development and manufacturing practices per quality system or internal requirements; and verify all final design documentation, parts lists, and drawings to ensure compliance and accuracy • Perform various product engineering tasks as necessary to support R&D and operations • Communicate updates to the program manager and other various cross-functional team members as it relates to task completion and schedule adherence relative to overall business goals and objectives • Evaluate and solve technical challenges either individually or as part of a team by: collaborating cross-functionally to troubleshoot issues and implement solutions; actively participating in problem solving sessions and/or brainstorming; systemically and logically working through issues using personal skills/experience and/or pulling in resources as needed; and designing and conducting experimental testing to appropriately characterize and evaluate solutions • Participate in engineering meetings, technical working groups, and project management discussions • Assist in the building, prototyping, modifying, and testing of engineering components • Assist with prototyping, assembling, characterizing, validating inspection processes, rework instructions, and/or test methods • Follow safety protocols, quality SOP's, and regulatory requirements in all tasks and activities • Comply with applicable design-related standards published by external regulatory bodies • Properly document activities in accordance with best engineering practices, company procedures, and regulatory requirements • Perform other duties as needed and assigned Minimum Qualifications • Bachelor's degree in engineering (Mechanical, Manufacturing, Industrial, Biomedical, or technical equivalent) with 0-3 years of related work experience or an equivalent combination • Hands-on experience in metrology and familiarity with metrological equipment • Experience in the use of analytical methods including statistics, DOE, and associated SW tools (Minitab) • Strong problem-solving skills, attention to detail, and the ability to work both independently and as a team • Self-starter with proven ability to successfully work with minimal supervision • Desire to learn and meaningfully contribute to the team • Good teamwork and interpersonal skills • Good written and verbal communication • Ability to multitask, prioritize, and meet project deadlines with high attention to detail Preferred Qualifications • Hands-on experience with prototyping tools (3D printing, hand and/or power tools, manual and/or CNC machining, etc.), measurement tools (Keyence, Micro-Vu), and mechanical testing equipment • Working knowledge of current CAD tools, SolidWorks experience preferred • Experience working within an ISO certified or FDA registered work environment • Familiarity with medical device quality systems and regulations • Demonstrated cross-functional teamwork in technically demanding environment • Strong bias for action and ability to shift as needed to support changing business needs Other • Ability to lift up to 30 pounds • Must be able to wear clean room clothing and work in a cleanroom environment as needed Interview Process • Teams interview with hiring manager • Onsite tour of facility, meeting with some team members Top 3 Skills 1.
Inspection experience 2.
Qualification experience 3.
Evaluation for disposition for components experience Equipment • Laser scanning • Micro View Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Principal Mechanical Engineer II, Early Research and Development
🏢 Nesco Resource
Salary not disclosed
About Us A healthier future drives us to innovate, continuously advance science, and ensure everyone has access to the healthcare they need today and for generations to come.
Creating a world where we all have more time with the people we love is what makes us Client.
At Client, we are working to make next-generation sequencing simple and accessible for routine use.
By accelerating clinical research, streamlining workflows, and expanding assay menus, we are broadening access to genomic data and lowering barriers to adoption.
From robust sample isolation and preparation tools to Client sequencing technology and advanced bioinformatics, we are developing differentiated, highly integrated end-to-end solutions for next-generation sequencing, resulting in a sample in, result out workflow.
Role Overview Our Systems Technology Group, a part of Client Sequencing Solutions, is focused on creating and advancing technologies to significantly enhance DNA sequencing workflows.
We are seeking a Principal Mechanical Engineer to lead the mechanical design, development, characterization, and integration of cutting-edge sequencing systems.
This is a hands-on role for a multidisciplinary expert focused on solving the core mechanical challenges at the heart of our next-generation platforms.
You will be responsible for concepting, designing, building, and testing Client electro-mechanical, pneumatic, thermal, and fluidic solutions that ensure the ultimate performance, reliability, and longevity of our systems.
Core Responsibilities Lead the end-to-end mechanical design and development of mechanical sub-systems including electro-mechanical, pneumatic, fluidic, and thermal components.
Collaborate with engineers from other disciplines (electrical, consumables, materials) to define and manage all critical technical interfaces for your module.
Develop Client mechanisms for automated reagent and flow cell loading, clamping, and sealing, ensuring reliability over repeated use.
Architect and design thermal control systems, including the specification and integration of heating/cooling elements, sensors, condensation control, and heat management.
Partner with internal and external simulation experts to guide and validate CFD, thermal, and optical models, using empirical data to refine designs.
Serve as the primary technical expert for your sub-system during integration, verification, and troubleshooting activities, working directly with the Systems Integration team.
Lead cross-functional design reviews, driving alignment and resolving technical trade-offs between mechanical design, consumables, materials, and assay requirements.
Drive the technical execution for sub-systems, manage timelines for your design deliverables, and contribute to the overall project plan.
Create and maintain all design documentation for your sub-systems, including detailed CAD models, drawings, and specifications.
Contribute to the technical strategy for the future integrated system, providing data-driven recommendations on architecture and technology choices based on your sub-system's performance.
Present technical progress, data, and design trade-offs to the broader project team and key stakeholders, clearly articulating the rationale and impact of engineering decisions.
Who You Are Required: PhD in Mechanical Engineering, Bioengineering, or a related discipline with at least 3 years of relevant industry experience; or a Master's degree with at least 4 years of relevant industry experience; or a Bachelor's degree with at least 7 years of relevant industry experience.
Demonstrated deep, hands-on expertise in the design, development, and testing of complex mechanical, electro-mechanical, and pneumatic systems, preferably for life science or diagnostic instrumentation.
Hands-on expertise in thermal management and the design of precision temperature control systems.
Experience developing fluidics systems and their interfaces including pumps, valves, tubing, sensors, and material selection.
Strong proficiency in 3D CAD software (e.g., SolidWorks) for detailed design and the creation of manufacturing drawings.
Expertise designing components for a variety of manufacturing processes (e.g., machining, injection molding, 3D printing).
Creative and resourceful problem-solver, with the ability to troubleshoot complex issues at the interface of hardware, software, and chemistry.
Proficient with common machine shop tools, as well as test and measurement equipment; proficient with rapid prototyping technology such as 3D printers, laser cutters, CNC mills/lathes, etc.
Demonstrated level of proficiency with Python, LabVIEW, or similar tools for device control and data acquisition.
Preferred: Demonstrated ability to lead technical projects and mentor junior engineers, providing clear guidance and delegating tasks to achieve project goals.
Experience using simulation tools (CFD, FEA) to guide design decisions.
Previously worked on the development of next-generation sequencing (NGS) or other genomics instrumentation.
Experience working in a regulated product development environment.
Strong interpersonal and communication skills with the ability to communicate technical knowledge in a clear and understandable manner, especially to non-experts; excel at problem-solving skills and the ability to work under ambiguous situations.
Excellent organizational skills, including the ability to efficiently evaluate, prioritize and handle multiple changing projects and priorities; complete work in a timely, accurate and thorough manner.
This is an onsite position.
Interview Process Phone Interview In-person Interviews and Presentation (Candidate would need to do a bio presentation of skill sets etc.) Benefits Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Equal Employment Opportunity Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Creating a world where we all have more time with the people we love is what makes us Client.
At Client, we are working to make next-generation sequencing simple and accessible for routine use.
By accelerating clinical research, streamlining workflows, and expanding assay menus, we are broadening access to genomic data and lowering barriers to adoption.
From robust sample isolation and preparation tools to Client sequencing technology and advanced bioinformatics, we are developing differentiated, highly integrated end-to-end solutions for next-generation sequencing, resulting in a sample in, result out workflow.
Role Overview Our Systems Technology Group, a part of Client Sequencing Solutions, is focused on creating and advancing technologies to significantly enhance DNA sequencing workflows.
We are seeking a Principal Mechanical Engineer to lead the mechanical design, development, characterization, and integration of cutting-edge sequencing systems.
This is a hands-on role for a multidisciplinary expert focused on solving the core mechanical challenges at the heart of our next-generation platforms.
You will be responsible for concepting, designing, building, and testing Client electro-mechanical, pneumatic, thermal, and fluidic solutions that ensure the ultimate performance, reliability, and longevity of our systems.
Core Responsibilities Lead the end-to-end mechanical design and development of mechanical sub-systems including electro-mechanical, pneumatic, fluidic, and thermal components.
Collaborate with engineers from other disciplines (electrical, consumables, materials) to define and manage all critical technical interfaces for your module.
Develop Client mechanisms for automated reagent and flow cell loading, clamping, and sealing, ensuring reliability over repeated use.
Architect and design thermal control systems, including the specification and integration of heating/cooling elements, sensors, condensation control, and heat management.
Partner with internal and external simulation experts to guide and validate CFD, thermal, and optical models, using empirical data to refine designs.
Serve as the primary technical expert for your sub-system during integration, verification, and troubleshooting activities, working directly with the Systems Integration team.
Lead cross-functional design reviews, driving alignment and resolving technical trade-offs between mechanical design, consumables, materials, and assay requirements.
Drive the technical execution for sub-systems, manage timelines for your design deliverables, and contribute to the overall project plan.
Create and maintain all design documentation for your sub-systems, including detailed CAD models, drawings, and specifications.
Contribute to the technical strategy for the future integrated system, providing data-driven recommendations on architecture and technology choices based on your sub-system's performance.
Present technical progress, data, and design trade-offs to the broader project team and key stakeholders, clearly articulating the rationale and impact of engineering decisions.
Who You Are Required: PhD in Mechanical Engineering, Bioengineering, or a related discipline with at least 3 years of relevant industry experience; or a Master's degree with at least 4 years of relevant industry experience; or a Bachelor's degree with at least 7 years of relevant industry experience.
Demonstrated deep, hands-on expertise in the design, development, and testing of complex mechanical, electro-mechanical, and pneumatic systems, preferably for life science or diagnostic instrumentation.
Hands-on expertise in thermal management and the design of precision temperature control systems.
Experience developing fluidics systems and their interfaces including pumps, valves, tubing, sensors, and material selection.
Strong proficiency in 3D CAD software (e.g., SolidWorks) for detailed design and the creation of manufacturing drawings.
Expertise designing components for a variety of manufacturing processes (e.g., machining, injection molding, 3D printing).
Creative and resourceful problem-solver, with the ability to troubleshoot complex issues at the interface of hardware, software, and chemistry.
Proficient with common machine shop tools, as well as test and measurement equipment; proficient with rapid prototyping technology such as 3D printers, laser cutters, CNC mills/lathes, etc.
Demonstrated level of proficiency with Python, LabVIEW, or similar tools for device control and data acquisition.
Preferred: Demonstrated ability to lead technical projects and mentor junior engineers, providing clear guidance and delegating tasks to achieve project goals.
Experience using simulation tools (CFD, FEA) to guide design decisions.
Previously worked on the development of next-generation sequencing (NGS) or other genomics instrumentation.
Experience working in a regulated product development environment.
Strong interpersonal and communication skills with the ability to communicate technical knowledge in a clear and understandable manner, especially to non-experts; excel at problem-solving skills and the ability to work under ambiguous situations.
Excellent organizational skills, including the ability to efficiently evaluate, prioritize and handle multiple changing projects and priorities; complete work in a timely, accurate and thorough manner.
This is an onsite position.
Interview Process Phone Interview In-person Interviews and Presentation (Candidate would need to do a bio presentation of skill sets etc.) Benefits Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Equal Employment Opportunity Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Sys Integratn/Test Eng (Secret Clearance)
🏢 Nesco Resource
Salary not disclosed
Description: Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.
Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
Coordinates subsystem and/or system testing activities with programs and other organizations.
Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
Required Experience: Candidate must have at least 3 years of experience with electrical and mechanical drawings and schematics.
Candidate must have at least 3 years of experience with basic shop tools, multimeters, oscilloscopes, and other diagnostic tools.
Candidate must have at least 3 years of experience with Troubleshooting electrical and mechanical systems.
Candidate must have at least 3 years of experience Authoring test plans, procedures, and reports.
Candidate must have at least 3 years of experience Developing, presenting, and discussing presentation material technical in nature.
Candidate must have at least 3 years of experience with Environmental testing.
Candidate must have at least 3 years of experience with Setting of test instrumentation, collecting test data, and analyzing test data Candidate must have at least 3 years of experience with Coordinating test plans with leadership, customers, and range personnel Candidate must have at least 3 years of experience with Presenting test plans to multiple stakeholders Candidate must have at least 3 years of experience with Planning, leading, conducting complex tests with multiple test objectives Candidate must be able to travel to support work at off-site test locations Candidate must be able to perform work in a lab and an outdoor environment Candidate must be a self starter and able to work independently Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
Coordinates subsystem and/or system testing activities with programs and other organizations.
Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
Required Experience: Candidate must have at least 3 years of experience with electrical and mechanical drawings and schematics.
Candidate must have at least 3 years of experience with basic shop tools, multimeters, oscilloscopes, and other diagnostic tools.
Candidate must have at least 3 years of experience with Troubleshooting electrical and mechanical systems.
Candidate must have at least 3 years of experience Authoring test plans, procedures, and reports.
Candidate must have at least 3 years of experience Developing, presenting, and discussing presentation material technical in nature.
Candidate must have at least 3 years of experience with Environmental testing.
Candidate must have at least 3 years of experience with Setting of test instrumentation, collecting test data, and analyzing test data Candidate must have at least 3 years of experience with Coordinating test plans with leadership, customers, and range personnel Candidate must have at least 3 years of experience with Presenting test plans to multiple stakeholders Candidate must have at least 3 years of experience with Planning, leading, conducting complex tests with multiple test objectives Candidate must be able to travel to support work at off-site test locations Candidate must be able to perform work in a lab and an outdoor environment Candidate must be a self starter and able to work independently Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Tool Design Engineer - Secret Clearance
🏢 Nesco Resource
Salary not disclosed
Description: Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
Complete understanding and wide application of technical principles, theories, and concepts, in the field.
Independently determines and develops approach to solutions.
Provides technical solutions to a wide range of difficult problems.
Will act as liaison between designers, manufacturing, engineers, manufacturing, and tooling procurement regarding aspects of quality, cost, and schedule relating to tool manufacturing planning.
Will lead activities to improve processes within the tool design and planning product flow.
Will use 3DX / Catia for design and create technical 2D drawings.
Required Experience: • Secret security clearance.
Ability to obtain SAP within 6 weeks of submission.
• Minimum 1 year design experience with Catia V5 or 3DX • Minimum 1 year cumulatively designing structural assembly / fabrication tools for aerospace vehicles or similar • Minimum 7 years' experience designing structures or tooling in CAD • Minimum 1 year creating 2D technical design drawings.
Highly proficient in GD&T.
Desired Experience: •Tool fabrication •Types of tooling: structures assembly, fixtures, drill jigs, lift and move tools •Authoring tool usage instructions or assembly work instructions •Manufacturing engineering type production floor support •Aircraft assembly •First article builds •B.S.
degree Security Clearance Comments Value: Active secret clearance with an investigation within last 5 years or CE enrollment.
special access required to start.
(P47) HR0011-24-C-0304 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Complete understanding and wide application of technical principles, theories, and concepts, in the field.
Independently determines and develops approach to solutions.
Provides technical solutions to a wide range of difficult problems.
Will act as liaison between designers, manufacturing, engineers, manufacturing, and tooling procurement regarding aspects of quality, cost, and schedule relating to tool manufacturing planning.
Will lead activities to improve processes within the tool design and planning product flow.
Will use 3DX / Catia for design and create technical 2D drawings.
Required Experience: • Secret security clearance.
Ability to obtain SAP within 6 weeks of submission.
• Minimum 1 year design experience with Catia V5 or 3DX • Minimum 1 year cumulatively designing structural assembly / fabrication tools for aerospace vehicles or similar • Minimum 7 years' experience designing structures or tooling in CAD • Minimum 1 year creating 2D technical design drawings.
Highly proficient in GD&T.
Desired Experience: •Tool fabrication •Types of tooling: structures assembly, fixtures, drill jigs, lift and move tools •Authoring tool usage instructions or assembly work instructions •Manufacturing engineering type production floor support •Aircraft assembly •First article builds •B.S.
degree Security Clearance Comments Value: Active secret clearance with an investigation within last 5 years or CE enrollment.
special access required to start.
(P47) HR0011-24-C-0304 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
jobs by
✓ All jobs loaded