Jobs in Suffield Depot Connecticut

Position Purpose:

The CDL Driver at SRS ensures safe, timely delivery of building materials to job sites, verifies inventory, follows safety protocols, and maintains high service standards. This role supports operational efficiency and fosters strong customer relationships through professionalism, teamwork, and responsiveness.

Key Responsibilities:

• Safely operate Class A/B vehicles within a 200-mile radius, following DOT regulations with no overnight travel.

• Conduct thorough vehicle inspections, verify inventory accuracy, and ensure secure, damage-free deliveries.

• Assess job site conditions to prevent hazards, collaborate with customers for material placement, and document deliveries with photos per company policy.

• Support yard operations and uphold OSHA safety standards to maintain a clean, efficient, and safe work environment.

Direct Manager Direct Reports:

This position will typically report to the Assistant Branch Manager or Operations Manager and may supervise or train junior drivers if required.

Travel Requirements:

CDL Drivers at SRS travel locally and interstate within a 200-mile radius, ensuring all deliveries begin and end at the home branch the same dayno overnight stays required.

Physical Requirements:

CDL Drivers must be physically capable of long hours of driving and handling materials up to 100 lbs. Responsibilities include loading/unloading with forklifts or manually, working in varied weather and noisy environments, and reading job-related documents in English. SRS provides reasonable accommodations and promotes a diverse, inclusive workplace.

Working Conditions:

CDL Drivers must manage long hours, fast-paced schedules, and varying weather conditions while traveling within a 200-mile radiusno overnight stays. The role involves safe, timely deliveries, on-site coordination, and occasional yard support. Success requires adaptability, attention to detail, and a strong commitment to safety and customer service.

Minimum Qualifications:

• Must have a valid CDL Class A or B with air brakes endorsement and a clean driving record.

• Requires experience in commercial driving, knowledge of DOT/OSHA regulations, and ability to lift up to 100 lbs.

• Must operate forklifts/Moffett's safely, work in varied conditions, and communicate effectively in English. Candidates must be 18+ (21 for interstate/hazmat), pass background checks, drug tests, and E-Verify.

• High school diploma or GED required. SRS supports ADA accommodations and values diversity and inclusion.

Preferred Qualifications:

• Preferred qualifications include a Hazmat endorsement, strong vehicle maintenance skills, experience with multi-drop deliveries, and familiarity with fleet management systems. Candidates should demonstrate a commitment to continuous improvement, and multilingual abilities are a plus for enhancing customer communication.

Minimum Education:

High school diploma or equivalent.

Preferred Education:

Vocational or industry-specific training in truck driving.

Minimum Years Of Work Experience:

1-2 years of relevant commercial driving experience.

Certifications:

• Commercial Drivers License (CDL A or CDL B) with Air Brakes Endorsement - Required

• Current DOT Medical Certificate - Required

• Forklift Certification - Preferred

• FMCSA Registration - Required

• Additional requirements include successful completion of pre-employment screenings including background check, drug test, and verification via the Federal Motor Carrier Safety Administrations (FMCSA) Clearinghouse.

Competencies:

• Demonstrates strong safety compliance through inspections and adherence to DOT/OSHA regulations.

• Ensures operational efficiency via accurate inventory handling and timely deliveries.

• Provides excellent customer service with professional on-site coordination.

• Skilled in operating commercial vehicles and equipment. Adapts quickly to challenges, maintains detailed records, and communicates effectively in English.

• Physically capable of handling heavy materials and working in demanding environments.

Job Location:

• 
  
• Competitive salaries for all team members paid weekly
  
• 401(k) Retirement Plan with company matching
  
• Employee Stock Purchase Program
  
• Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
  
• Paid Parental Leave, Adoption Assistance Program
  
• Medical, Dental and Vision Benefits
  
• Flexible and Dependent Care Spending Accounts
  
• Company paid Life insurance and Short-Term Disability
  
• Additional Life Insurance and Long-Term Disability also offered
  
• Mental, Physical and Emotional Well-Being Programs for Employees and Families
  
• Wellness Program and Safety Program with Bonuses for our Drivers
  
• Employee Referral Bonus Program
  

• 
  
• 5+ years of experience in an aerospace or high precision manufacturing environment preferred.
  
• 3+ years of experience operating CNC multi-axis Milling machine preferred.
  
• Experience setting up and changing over jobs on CNC equipment.
  
• Exceptional mechanical ability and strong mathematical skills.
  
• Excellent communication skills and problem-solving ability with demonstrated ability to work collaboratively to solve complex issues.
  

• 
  
• Ability to run 3, 4 and 5 axis milling and/or turning machines
  
• Must be willing to run multiple machines simultaneously where possible/feasible as most machines are part of manufacturing cells/machining centers
  
• Ability to work with hard metals such as Inconel, Titanium and Stainless Steel
  
• Ability to read English and interpret symbols on operation sheets
  
• Must be proficient in mathematics and be able to use a calculator
  
• Ability to use Fanuc controls and make offsets as required by the program
  
• Ability to load part onto a fixture
  
• Ability to load parts and fixtures onto hoists and operate hoist to load part onto machine
  
• Ability to read and interpret CNC Programs at the machine
  
• Must be able to read tool sheets and set up tools for use on a job or part
  
• Ability to use precision measuring tools such as gauges, swing gauges, calipers, and micrometers
  
• Familiarity with operation of Right-Angle Heads
  
• Must have Geometric Dimension and Tolerancing knowledge
  
• Must possess the ability to work within tight tolerances such as thousandths
  

• High school diploma or equivalent required.

Salary Range $20.50 - $26.00/hr

Location: WINDSOR, CT (PriceRite of WINDSOR)

Job Title: Meat Department Supervisor, Full Time

Department: Operations

Reports To: Store Manager, Assistant Store Manager

At Price Rite, our purpose is \"to care deeply about people, helping them to eat well and be happy\"! We want everything you do as a Price Rite Team Member to support that purpose and our overall values.

On your journey at Price Rite, you will learn a variety of departments, and skills, necessary to be successful in retail grocery. Whether you are looking for a long-term career, or with Price Rite for summer work, we believe in cross training our team to allow us to deliver an outstanding shopping experience to our customers.

To support our purpose, we have established our Service Priorities to help empower our team to meet our customer needs on a daily basis. Our service priorities are:

• Safety
• Friendliness
• Presentation
• Efficiency

Working at Price Rite is more than a job or career, it's a rewarding experience. Price Rite offers many great perks and benefits for their team; opportunities to give back to the community in which we serve and cost saving programs designed to save you money, work/life balance, recognition and many other programs making Price Rite a great place to work and build a career.

Job Summary: The Meat Department Supervisor is accountable to the Store Manager/ Assistant Store Manager and is responsible for directing, developing and managing the Meat Department and Perishable staff to protect company assets, maintain store conditions and presentation, maximizing sales customer and team member relations through proper controls such as sanitation, merchandising, payroll, required record keeping and compliance of Company, State and Federal policies, rules, procedures, regulations and laws.

Minimum Required Qualifications:

• Read, write and speak English
• Perform basic math skills: calculation of percent, addition, subtraction
• Understand and follow directions
• Must be able to bend, reach, stoop and lift moderate-weighted product
• Lift up to 35 pounds regularly and at times up to 75 lbs.
• Push/pull equipment loaded with product
• Work a flexible schedule consisting of daytime, evening and weekends
• Ability to work in temperatures of 40 degrees or lower
• Prior meat and/or supervisory experience preferred
• High school diploma required, some college preferred
• Ability to travel to nearby stores

Essential Job Functions:

• Order, receive and inventory department products.
• Organize, clean and maintain coolers, freezers and cases.
• Stock, merchandise and sign meat department to enhance sales, profits and presentation.
• Perform managerial duties such as supervising, training and developing of team members.
• Communicate to all levels of management.
• Achieve sales and shrink objectives.
• Provide exceptional customer service.
• Achieve company standards of clean, fresh and friendly.
• Proper use of store security systems and keys per company policies.
• Has a Company recognized Food Safety Certification and/ or can successfully complete training to receive and maintain a Company recognized Food Safety Certification
• Perform other duties as assigned

Important Disclaimer Notice: The above statements are only intended to represent the essential job functions and general nature of the work being performed and are not exhaustive of the tasks that an Associate may be required to perform. The employer reserves the right to revise this job description at any time and to require Associates to perform other tasks as circumstances or conditions of its business, competitive considerations, or the work environment change. This job description is not a guarantee of employment.

Benefits Overview

• Competitive Wages
• 401k Savings Program
• Flexible work schedules
• Tuition Reimbursement
• Paid Time Off: Vacation Time, Sick Time, 6 Paid Holidays
• Discount programs: Cell Phone discounts, ticket, hotel, vacation discounts and other personal discounts
• Well-Being Programs: Financial Well Being, Mental Health, Gym Membership Discounts
• Paid opportunities to participate in community events
• Recognition Programs: Team Member of the Month, Team Member of the Year, Safety Recognition, Performance Recognition, Monthly Team Member Store Events
• Team Member Referral Bonus
• Ongoing training and career preparation
• Medical, Prescription, Dental, and Vision Insurance Benefits
• Company Paid Life Insurance with optional supplemental, spouse, and child coverage
• Short Term and Long-Term Disability and AD&D

Location: United States of America

Cities: Enfield

Travel Required: 00% - 25%

Relocation Provided: No

Shift: Second Shift (United States of America)

Job Description Summary: Hours 1:45p-10:15p

Responsibilities:

Responsible for safely operating electric powered industrial truck equipped with lifting devices such as forklift or elevating platform, to push, lift, stack, or move products or materials by performing the following duties:

• Adheres to the Standard Operating Procedures (SOPs) and Good Manufacturing Practices (cGMPs) that are in effect
• Positions forks, lifting platform, or other lifting device under, over, or around loaded pallets, skids, boxes, products, or materials and transports load to designated area
• Unloads and stacks material by using lifting device
• Replenishes shelves throughout the facility based on the number on the product, by scanning the tag to determine location
• Positions and weighs pallets
• Inventories materials on work floor and stocks the shelves in order to replenish necessary products
• Loads or unloads materials onto to or off of pallets, skids, or lifting device. Must be able to document information as per SOP
• Complies with company policies and procedures and maintains regular work attendance
• Personal responsibility for following safety rules, SOPs and cGMPs guidelines
• Willingness/capability to cross train/learn job functions in other departments of the facility
• Performs other duties as assigned

Qualifications:

• High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience
• Must be licensed to operate lift equipment (Licensing may be through internal or external training)
• 3 months experience operating High Reach Fork Lift equipment - will be trained and certified in-house
• High school diploma or general education degree (GED) preferred
• Prior manufacturing or warehouse experience preferred
• Ability to write simple correspondence and exercise basic mathematical skills
• Must be able to respond to verbal and written instructions in basic English
• Able to work overtime as the Business requires
• Work environment may be exposed to powders, chemicals and allergens (peanuts, tree nuts, milk, dairy, eggs, wheat, gluten, soy, fish and shellfish) Physical Demands include but are not limited to the following:
  • Standing for extended periods of time
  • Reaching with arms and hands
  • Talking and hearing
  • Walking and kneeling
  • Regularly lifting up to 50lbs and occasionally lifting and/or moving up to 70lbs with assistance
  • Able to maneuver pallet jack with load up to 1200 lbs.
  • Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus

The Coca-Cola Company will not offer sponsorship for employment status (including, but not limited to, H1-B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require The Coca-Cola Company's sponsorship to continue to work legally in the United States.

Pay Range: $46,800 - $57,200

Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered.

Our Purpose and Growth Culture:

We are taking deliberate action to nurture an inclusive culture that is grounded in our company purpose, to refresh the world and make a difference. We act with a growth mindset, take an expansive approach to what's possible and believe in continuous learning to improve our business and ourselves. We focus on four key behaviors curious, empowered, inclusive and agile and value how we work as much as what we achieve. We believe that our culture is one of the reasons our company continues to thrive after 130+ years.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

Physical Requirements:

PI12f15f9a85f4-26289-39677162

Sets-up and operates CNC Swiss Machines to produce highly precision component parts that meet all quality standards. Must be able to work independently and provide training/guidance to others.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 7 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Mitsubishi Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PIc8680fb

This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pm

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PIb02da9b9a9e7-26289-39676932