Jobs in Elkton
260 positions found — Page 5
Registered Nurse on Inpatient Surgical Intermediate/Step-Down Unit-Day/Midnights
Christiana Care is seeking an experiencedΒ Registered NurseΒ for our Surgical Intermediate Step-Down Unit, 4D.Β This is a 35-bed Intermediate Care/Stepdown inpatientΒ unit, caring for adolescent, adult and geriatric patients. This unit cares for patients requiring nursing interventions Q2-Q4 hours. Are you ready for a higher level of care?
Highlights:
- Four timeΒ recognized as Magnet Status Hospital!
- Growth Opportunities defined by our Clinical Ladder.
- Full medical, dental, vision and life insurance.
- 403b with defined contributions.
- Generous paid time off with annual roll-over and opportunities to cash out
- Tuition assistance.
Requirements:
- BSN required; or commitment to obtaining within three years of date of hire.
- One year of nursing experience required. Two years' of nursing experience in an acute care setting is strongly preferred.
- Licensed or license eligibility in the state of Delaware.
- BLS Certification required.
- ACLS required within 1 year of hire
Hours:Β This is a full-time position of 72 hours per pay/36 hours per week. The hours for this position are rotating Day/Evening shifts of 7 a.m. - 7:30 p.m. and Overnights of 7 p.m. - 7:30 a.m. This requires a weekend rotation and follows internal weekend requirementΒ practice.Β Holidays required per organization policy.
Hourly Pay Range: $41.28 - $66.05This pay rate/range represents ChristianaCareβs good faith and reasonable estimate of compensation at the time of posting. The actual salary within this range offered to a successful candidate will depend on individual factors including without limitation skills, relevant experience, and qualifications as they relate to specific job requirements.Christiana Care Health System is an equal opportunity employer, firmly committed to prohibiting discrimination, whose staff is reflective of its community, and considers qualified applicants for open positions without regard to race, color, sex, religion, national origin, sexual orientation, genetic information, gender identity or expression, age, veteran status, disability, pregnancy, citizenship status, or any other characteristic protected under applicable federal, state, or local law.
Registered Nurse II - Operating Room Per Diem
Day/Evening shifts - 8 hours, 10 hours and 12 hours shifts
You may sign up for 84-hour commitments in 4-week block.
Do you thrive on diversity and new experiences in your career?
Demonstrate your expertise and abilities in a collaborative and supportive environment where you can work alongside colleagues from various Operating Rooms, all committed to delivering the highest standard of patient care in a diligent organization. ChristianaCare is actively seeking Registered Nurses for our Operating Room/Perioperative Per Diem Team. We are looking for individuals who are adaptable and ready to work at both Christiana Hospital, Christiana Surgery Center, and Wilmington Hospitals as required for operational needs.
Highlights:
Our per diem registered nurses serve in various operating rooms at both the Newark and Wilmington campuses.Β
Wilmington Hospital and Christiana Hospital have achieved Magnet Status!
Enjoy flexible self-scheduling!
We provide competitive pay rates, including shift and weekend differentials.
ChristianaCare has been ranked as the No. 5 health system in the nation by Money Magazine in its 2024 hospital rankings. ChristianaCare received an overall grade of A, as well as an A for its dedication to price transparency. Would you like to be part of an organization that continues to strive to be the best?
What to Expect:
Pay rates are based upon the amount of hours you commit to on a monthly basis. You may sign up for 84-hour commitments in 4 weeks blocks. Available shifts will be 8 hours, 10 hours and 12 hours shifts
Require to commit to 10 shifts of day shift training the first month to attend New Employee Orientation, Nursing Orientation, and training.
Requirements:
BSN required or commitment to acquiring within three years of the date of hire
Current RN licensure required
Three years or more of Operating Room Registered Nurse Experience is REQUIRED.
CNOR certification is a plus.
Christiana Care offers remarkable resources and outstanding benefits to support our nurses and their careers. As one of the areaβs most respected health systems, we know just how significant the nurseβs role is in maintaining the level of quality care weβre known for. Nursing is a centerpiece of the care continuum, valued by physicians and hospital management.
About Christiana Care:
Headquartered in Wilmington, Delaware, ChristianaCare is one of the countryβs most dynamic health systems, centered on improving health outcomes, making high-quality care more accessible, and lowering healthcare costs. ChristianaCare includes an extensive network of outpatient services, home health care, medical aid units, two hospitals (1,227 beds), a Level I trauma center and a Level III neonatal intensive care unit, a comprehensive stroke center, and regional centers of excellence in heart and vascular care, cancer care and womenβs health. ChristianaCare is a not-for-profit guiding health system with more than 260 residents and fellows. We are continually ranked by US News & World Report as the Best Hospital. With our outstanding, data-powered care coordination service and a focus on population health and value-based care, ChristianaCare is crafting the future of healthcare
$56.00 hourlyThis pay rate/range represents ChristianaCareβs good faith and reasonable estimate of compensation at the time of posting. The actual salary within this range offered to a successful candidate will depend on individual factors including without limitation skills, relevant experience, and qualifications as they relate to specific job requirements.Christiana Care Health System is an equal opportunity employer, firmly committed to prohibiting discrimination, whose staff is reflective of its community, and considers qualified applicants for open positions without regard to race, color, sex, religion, national origin, sexual orientation, genetic information, gender identity or expression, age, veteran status, disability, pregnancy, citizenship status, or any other characteristic protected under applicable federal, state, or local law.
We are hiring remote contributors to review consumer finance content focused on budgeting and money-saving strategies.
Your role will involve reading short financial guidance pieces and providing feedback on their usefulness for people managing tight budgets. You may also identify which tips are the most practical for everyday situations.
This position is ideal for people interested in personal finance, budgeting, or improving financial literacy.
The work is flexible and completed online.
Remote working/work at home options are available for this role.
We are seeking individuals to review and provide feedback on everyday money-management tips. This role focuses on common financial challenges such as managing expenses, reducing spending, and making smarter financial choices.
You will review examples of budgeting methods and evaluate practical ideas people use to stretch their income. The goal is to understand which approaches work best for real households.
The work is flexible and fully online. Applicants should have an interest in budgeting, saving money, or improving financial habits.
No formal finance background is required.
Remote working/work at home options are available for this role.
Main Duties & Responsibilities: Advise customers on repairs and service based on their needs and budget, using company guidelines and best practices Understand and communicate customer's concerns to technicians Provide excellent service by answering customer questions Keep customers informed of their vehicle's status while in the shop over the phone, via email, text and in person Create invoices for clients using the company process, help process part orders/returns, dispatch repairs/parts as needed Fill in on tasks as needed to maintain the flow of the shop Qualifications Possess a valid state driverβs license High school diploma or equivalent education Strong sales and customer service skills Strong written and verbal communication skills Analytical skills When you join the team at your local, independently owned TechNet Professional Service Center, youβll be working with a shop that takes pride in what they do.
A local shop in your community, backed by the support of a Nationwide network.
That is just part of what sets a TechNet Automotive Service Center apart from the rest.
Come join #TechNetNation!
May involve system level assembly and sub-assembly test.
- Assembles sub-assemblies and system level hardware
- Performs in process sub-assembly testing of product being manufactured, when required
- Completes Device History Record data
- Performs assembly and test requirements for reconditioned hardware, when required
- Perform packaging functions in Instruments Manufacturing, when required
- Maintain compliance with policies QSR, ISO, EH and S
- Proficiency with basic hand tools such as screwdrivers, wrenches, torque tools, terminal crimpers, and soldering irons.
- Ability to follow written instructions such as assembly procedures, test procedures mechanical assembly drawings.
- Experience with basic mechanical inspection equipment such as calipers and indicators.
- Experience with basic electrical test equipment such as multimeters.
- Supports the day-to-day operations of manufacturing and service support to forecast, and regulatory compliance and policies QSR, ISO, EH and S
- Provides training as needed.
- Participates in the reduction of risk and injury in the workplace by identifying risks and implementing controls to eliminate or minimize risk.
- Supports internal departmental audits of manufacturing processes to ensure compliance with policies QSR, ISO, EH and S.
- Perform other duties as required.
The successful candidate will provide essential field representation throughout the Delmarva Power Territory, ensuring construction activities align with project requirements and safety standards.
The team size is currently 26 members Responsibilities β’ Provide consistent onsite field representation for various electric utility construction activities.
β’ Support project teams with technical tasks and assignments on an as-needed basis.
β’ Attend periodic in-office meetings and collaborate with the broader project team.
β’ Submit detailed Daily Reports using uPPM software and record Daily Observations within the Asset Suite 8 system.
β’ Manage administrative requirements including mandatory training in the Learning Management System and timely entry of time and expenses into Beeline.
β’ Maintain clear communication with stakeholders via email, text, and instant messaging.
Required Skills & Experience β’ Extensive experience as a Utility Specialist focused on Transmission, Distribution, and Substation projects.
β’ Proven background in the Electric Utility industry.
β’ Deep technical understanding of electrical Outages and Lockout/Tagout (LOTO) procedures.
β’ Proficiency in core electric utility sectors: Distribution, Substation, and Transmission.
β’ Functional computer literacy, including the ability to navigate specialized project management and reporting software.
β’ Strong verbal and written communication skills for reporting and team coordination Preferred Skills & Experience β’ Proficiency in Microsoft Office Suite, specifically MS Word and MS Excel.
β’ Prior experience working within the Delmarva Power Territory or similar utility service areas ________________________________________ nTech is an equal opportunity employer.
All offers of employment are contingent upon pre-employment drug and background screenings.
Only candidates who meet all of the above client requirements will be contacted by a recruiter.
Terms of Employment β’ W2 Contract, 12 Months β’ This is a Onsite role at Delaware (Location will vary throughout Delmarva Power Territory (entire state of Delaware and a portion of Maryland) β’ Part-time role (upto 40 hours depending on workload) Overview Our client is seeking (2) two Construction Manager to serve as an onsite Construction Field Representative supporting capital electric utility projects.
The successful candidate will provide essential field representation throughout the Delmarva Power Territory, ensuring construction activities align with project requirements and safety standards.
The team size is currently 26 members Responsibilities β’ Provide consistent onsite field representation for various electric utility construction activities.
β’ Support project teams with technical tasks and assignments on an as-needed basis.
β’ Attend periodic in-office meetings and collaborate with the broader project team.
β’ Submit detailed Daily Reports using uPPM software and record Daily Observations within the Asset Suite 8 system.
β’ Manage administrative requirements including mandatory training in the Learning Management System and timely entry of time and expenses into Beeline.
β’ Maintain clear communication with stakeholders via email, text, and instant messaging.
Required Skills & Experience β’ Extensive experience as a Utility Specialist focused on Transmission, Distribution, and Substation projects.
β’ Proven background in the Electric Utility industry.
β’ Deep technical understanding of electrical Outages and Lockout/Tagout (LOTO) procedures.
β’ Proficiency in core electric utility sectors: Distribution, Substation, and Transmission.
β’ Functional computer literacy, including the ability to navigate specialized project management and reporting software.
β’ Strong verbal and written communication skills for reporting and team coordination Preferred Skills & Experience β’ Proficiency in Microsoft Office Suite, specifically MS Word and MS Excel.
β’ Prior experience working within the Delmarva Power Territory or similar utility service areas ________________________________________ nTech is an equal opportunity employer.
All offers of employment are contingent upon pre-employment drug and background screenings.
Only candidates who meet all of the above client requirements will be contacted by a recruiter.
- $26.00 Position Summary This position is responsible for timely and cost-effective supply ordering, receipt and stocking of inventory, and shipping of SSO inventory.
Responsible for maintaining materials/warehouse, may also deliver material to technicians and/or job sites.
Duties and Responsibilities: Assisting with issuing purchase orders for employees and vendors.
Assisting in processing order placement for technicians, clients and vendors.
Keeping track of warehouse inventory and stock, including quarterly counts.
Drive and deliver parts as needed.
Handle waste management including electronic waste, equipment recycling, batteries, etc.
Overlooking incoming materials.
Pulling /packaging/delivering customer orders with little or no supervision.
Maintaining shipping receiving documents and all other paperwork as needed.
Completing branch inventory exchange forms.
Attending phone calls requests of customers and employees.
Completing P.O.
requisition forms.
Create/maintain a systematical filing system for invoices and other index documents.
Prepare work by gathering sorting and proofing documents.
May assist in applying for permits, help with submittals and O & M's.
Performing other duties as assigned.
Quals-- Requirements: High School Diploma or General Education Degree (GED) One to three years of experience in a similar role and/or administrative function and experience working with ERP systems preferred.
Proficient in Microsoft Office Excel and Outlook Must have a valid driver license and ability to operate a motor vehicle if necessary.
Attention to detail, with high degree of accuracy and personal accountability Physical Demands: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; twist; use hands to handle; push; pull or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear.
The employee must regularly lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Ability to climb a ladder or rolling safety ladder.
Work Environment: Normal warehouse environment.
The noise level in the work environment is usually moderate.
Technical Skills
10+ years in software development and application design.
5+ years acting as an Application Architect, Technical Lead, or similar architecture role.
Position Summary
We are seeking an experienced Application Architect to design, guide, and oversee the architecture of critical enterprise applications. This role requires broad technical depth across application frameworks, integration patterns, cloud platforms, and modern development practices. The Application Architect will partner closely with business stakeholders, engineering teams, solution architects, and technical leads to deliver scalable, secure, and maintainable technology solutions.
The ideal candidate brings strong handson engineering background, deep experience with application and integration architecture, and the ability to lead design decisions that align with enterprise strategy and standards. This role requires strong communication, leadership, and crossteam collaboration skills.
Required Qualifications
Technical Skills
10+ years in software development and application design.
5+ years acting as an Application Architect, Technical Lead, or similar architecture role.
Strong handson background in Java/J2EE, Spring/Spring Boot, and enterprise application frameworks.
Experience designing and supporting:
Multitier and microservicesbased architectures
REST APIs and integration patterns
Cloud-native applications (AWS/Azure/GCP)
Event-driven, messaging systems (Kafka, MQ, etc.)
Solid understanding of:
Application security frameworks (OAuth2, SAML, JWT)
Scalability, reliability, and performance engineering
Enterprise integration, middleware, API gateways
Experience with:
Relational & NoSQL databases
CI/CD pipelines (Jenkins, GitHub Actions, Azure DevOps)
Containerization (Docker, Kubernetes, OpenShift)
Ability to create:
Architecture diagrams
High-level and low-level design documentation
Solution roadmaps and reference architectures
Methodologies & Tools
Experience working in Agile/Scrum or SAFe environments.
Strong familiarity with:
UML, sequence diagrams, ER diagrams
Git/Bitbucket
Jira, Confluence
Maven/Gradle, Swagger/OpenAPI
Ability to perform architectural reviews, analyze technical debt, and evaluate solution alternatives.
Soft Skills
Excellent communication and presentation skills with ability to interface with business and executive stakeholders.
Strong leadership, mentoring, and decisionmaking abilities.
Highly analytical and able to simplify complex technical concepts.
Capable of managing multiple initiatives in a dynamic environment.
Desired Qualifications
Bachelors or Masters degree in Computer Science, Engineering, or related field.
Relevant certifications preferred:
Cloud (AWS/Azure/GCP Architect)
TOGAF
SAFe Architect
Experience with:
Application modernization or cloud migration programs
Domain-driven design
API-first design and governance
Financial services or other regulated industries
Job Title: Associate Scientist
Location: Newark, DE
Pay Rate: $23/hour-$26/hr
Schedule: MondayβFriday, 6:00 AM β 2:30 PM
Position Type: 6 month contract
*candidates must have plant propagation experience*
Position Overview
We are seeking a motivated Associate Scientist to support a commercial herbicide portfolio by generating high-quality biological data essential for new product development and product renewal. This role focuses on conducting controlled environment experiments (greenhouse, growth chambers, and outdoor field settings) to evaluate herbicide performance while adhering to strict scientific protocols and safety standards.
This is an excellent opportunity for candidates with a background in plant science or related agricultural disciplines who enjoy hands-on research and working in a dynamic, team-oriented environment.
Key Responsibilities
- Plan and conduct experiments for herbicide development in greenhouse, growth chamber, and outdoor field environments
- Perform plant propagation, sorting, staging, and preparation of experimental test units
- Prepare experimental variables including herbicide formulations and serial dilutions
- Conduct herbicide spray applications using specialized equipment
- Implement bioassays and screening protocols to evaluate herbicide efficacy and crop tolerance
- Collect, analyze, and interpret biological data; prepare summaries and reports for project teams
- Collaborate with cross-functional teams to manage project timelines and resources
- Ensure compliance with GLP standards, safety protocols, and research guidelines
- Properly dispose of unused or poor-quality bioassays and manage disposal of regulated plant species according to safety requirements
Required Qualifications
- Bachelorβs degree (BS) in Plant Science, Agronomy, Weed Science, Horticulture, or a related field
- Basic understanding of agriculture, food production, and crop protection
- Familiarity with regulatory and compliance requirements in research or laboratory environments
- Proficiency in Microsoft Word and Excel for data entry, analysis, and reporting
Preferred Qualifications
- Masterβs degree (MS) in Plant Science, Agronomy, Weed Science, Horticulture, or related field
- Knowledge of weed identification, herbicide application, and herbicide evaluation methods
Experience & Skills
- Hands-on experience in greenhouse and/or field research
- Laboratory skills including formulation handling and serial dilution preparation
- Knowledge of herbicide application techniques and evaluation methods
- Strong attention to detail and observational skills
- Ability to independently execute complex experimental plans with minimal supervision
- Strong teamwork, communication, and organizational skills
- Familiarity with safety practices and compliance standards
- Demonstrated reliability in meeting timelines and delivering high-quality results
If you are a detail-oriented science professional looking to grow your career in agricultural research, we encourage you to apply today!
SHIFT: Primarily M-F / 7a-5:30pm
PRIMARY FUNCTION:
To assist the physicians during procedures performed and assist with the technical aspects of lab operations.Β To assist in the design, implementation, maintenance and evaluation of equipment and inventory systems to support cardiac cath lab and structural heart functions.
PRINCIPAL DUTIES AND RESPONSIBILITIES:Β Β Β Β
Provides proficient technical and clinical support for cardiac catheterization lab and structural heart procedures including:Β TAVR, EVAR, ADS/PFO Closures, Left Atrial Appendage Procedures, Mitraclip and other procedures deemed appropriate for the structural heart lab and cardiac cath lab.Β Β
Assist with instruction of new staff and provision of ongoing staff education related to specialized equipment located within the Cardiac Catheterization Lab and Structural Heart Lab and serves as in a leadership role to support team training.
Acts as a preceptor for new employees and resource for less experienced staff in specific area of expertise to improve clinical practice.Β
Serves as a mentor for others in scrub techniques as encountered in the cath lab and structural heart lab settings.Β Is open to feedback concerning own clinical skills.
Demonstrates skills and knowledge necessary to provide care appropriate to neonatal, pediatric, adolescent, adult and geriatric patients, including knowledge of growth and development, the ability to obtain and interpret information to identify patient needs, and provide the care needed.
Demonstrates advanced skills in areas of direct patient care and patient/family teaching in the care of the cardiac cath patient undergoing diagnostic procedures, percutaneous transluminal coronary angioplasty, directional coronary atherectomy, and structural heart room procedures.
Adheres to strict guidelines related to sterile technique in a procedural setting and/or operating room environment
Assists in departmental Performance Improvement assessments and initiatives and works with leadership to identify both individual and departmental learning needs and seeks opportunities to meet these learning needs.
Communicates appropriately with good interpersonal skills
Performs duties of a scrub assistant during a procedure, including; controlling and manipulating guide wires and balloon catheters, maintaining a sterile field, and demonstrates a solid knowledge, skills and abilities related to the handling of instruments/equipment in the hybrid structural heart room setting for all procedures.
Performs duties of a monitor person during a procedure, including monitoring cardiac waveforms, cardiac values, and documenting steps of the actual procedure that includes, but is not limited to, medications administered.
Acts as a team member during procedures to assure safe and efficient patient care on a daily basis.
Participates in the development, implementation and ongoing monitoring of department clinical databases.
Demonstrates compliance with Christiana Care Center and Departmental policies and procedures and mandatory education requirements including but not limited to safety, infection control, attendance and dress code.
Performs assigned work safely, adhering to established departmental safety rules and practices.Β Reports to supervisor, in a timely manner, any unsafe activities, conditions, hazards, or safety violations that may cause injury to oneself, other employees, patients and visitors.
Performs other related duties as required.
SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS:
Frequent contact with physicians, nurses, allied health personnel, patients, visitors, both internal and external.Β
DIRECTION/SUPERVISION OF OTHERS:
None.
DIRECTION/SUPERVISION RECEIVED:
Administrative and Medical Director.
Manager or their designee.
EDUCATION AND EXPERIENCE REQUIREMENTS:
Graduate of an approved school of radiologic technology with ARRT Licensure or CVT school.
Three years cardiac catheterization or EP experience. BCLS certified.Β Β
ACLS Certified
An equivalent combination of education and experience may be substituted.
KNOWLEDGE, SKILL, AND ABILITY REQUIREMENTS:
Knowledge of the anatomy and physiology of the cardiac system.
Knowledge and abilities related to hemodynamic monitoring and support for pediatric, adolescent, adult and geriatric patients.
Knowledge and ability to assess safe radiation practices for patients, employees and physicians.Β
Knowledge of departmental and unit specific standards, procedures, protocols and policies.
Ability to perform technical skills as outlined in procedures and protocols, demonstrating use of appropriate safety measures for patients, employees and self.
Ability to use applicable equipment according to procedures.
Ability to work with computers, information systems and learn new techniques.
Ability to instruct and teach co-workers and physicians on new techniques, protocols/procedures, equipment. Ability to develop and maintain effective working relationships with patients and members of the health care team.
Ability to demonstrate effective oral and written communication skills.
SPECIAL REQUIREMENTS:
None.
PHYSICAL DEMANDS:
Frequent lifting, carrying, pushing, handling, reaching, twisting, walking, standing and sitting.Β Frequent standing for extended periods while wearing heavy protective clothing.Β Occasional assisting with patient transporting via stretcher.
WORKING CONDITIONS:
Limited exposure to radiation, confined spaces and blood borne pathogens.Β Exposure to potential cuts and/or punctures, and repetitive motion tasks.Β Limited exposure to hazardous chemical solutions and odors. Flexible day and evening hours.Β Available for on/call.
Hourly Pay Range: $41.28 - $66.05This pay rate/range represents ChristianaCareβs good faith and reasonable estimate of compensation at the time of posting. The actual salary within this range offered to a successful candidate will depend on individual factors including without limitation skills, relevant experience, and qualifications as they relate to specific job requirements.Christiana Care Health System is an equal opportunity employer, firmly committed to prohibiting discrimination, whose staff is reflective of its community, and considers qualified applicants for open positions without regard to race, color, sex, religion, national origin, sexual orientation, genetic information, gender identity or expression, age, veteran status, disability, pregnancy, citizenship status, or any other characteristic protected under applicable federal, state, or local law.
Abacus is looking to hire a contractual Operations Manager in the Cecil County, MD area.
2nd shift 5p-330a
The Operations Manager provides leadership and supervision to an operations team working for the same value stream to create a world-class operations team. This includes, but is not limited to, managing inbound, and, pick/ pack operations, and outbound shipments, and maintaining inventory. The Operations Manager also ensures that departmental and support personnel are focused on continuous improvement and supports a lean culture of inventory, people, and processes.
Essential Duties & Responsibilities:
- Accountable to client SLA agreements and site-specific quality and fulfillment targets.
- Create and manage day to day operational strategy ensuring the campus operates in a safe, and productive manner.
- Actively contribute to the development of direct reports.
- Full work week responsibility of client or clients (including 2nd shift & weekend/donut shifts if applicable).
- Lead Individual Performance Management program for area.
- Responsible for planning, prioritizing, and communicating shift directives to insure efficiency, accuracy, and quality.
- Interact with clients on operational topics.
- Oversee all aspects of quality assurance including establishing metrics, applying industry best practices, and developing new tools and processes to ensure quality goals are met.
- Deliver performance evaluations to direct reports and provide feedback as necessary including salaried member of management.
- Promote and develop a culture of continuous improvement within the value stream.
- Deliver productivity and improvements in line with KPIs.
- Ownership of lean process improvement and CI initiatives.
- Organizes and manages all necessary resources required to improve safety, improve quality, increase customer service, and lower cost.
- Ensure all training and skills development programs, along with all Standard Operating Procures (SOPs) within the value stream are up to date and maintained.
- Promote a culture of high accountability, engagement, and associate empowerment.
- Manage relationship with on-site seasonal staffing representatives and advise director of operations on seasonal labor needs.
- Budget management for value stream.
Qualifications:
- Bachelor's degree strongly preferred / HS Degree or GED required.
- Experience working with process improvement ideologies, e.g., LEAN, Six Sigma, or similar / Six Sigma certification preferred.
- Minimum of 2 years of progressive Operations experience in a manager role.
- Experience leading up to 100 associates.
- Experience in creating productivity improvement through continuous improvement efforts.
- Execution focused.
- Performance oriented.
- Ability to be flexible.
- Strong communication skills.
- Good motivational skills.
- Awareness of internal customer requirements.
- Ability to collaborate and drive performance.
- Analyze data to identify defects and root cause analysis.
- Identify process opportunities to create growth.
- Performance oriented.
- Ability to be flexible.
- Strong verbal and written communication skills.
- Ability to establish and or enhance quality control procedures.
- Must demonstrate capacity to learn ALL operational functions.
- Ability to coach, mentor, and motivate direct reports.
- Ability to influence and collaborate with peers and upper management.
- Must be proficient with Microsoft Office with a strong emphasis in Excel.
- Must have intermediate math skills.
Placers is partnering with a highly respected, innovation-driven global manufacturer to identify an experienced Lead Counsel for a temporary engagement supporting a diverse portfolio of specialty businesses. This is a unique opportunity to operate as a strategic legal advisor across multiple technical and regulated markets, including energy, life sciences, advanced materials, and branded products.
In this role, you will work directly with senior leadership to translate business strategy into practical legal guidance, helping teams navigate complex commercial, intellectual property, and regulatory landscapes while enabling growth and innovation.
What You'll Do
- Serve as a trusted advisor to senior leaders across multiple global business units
- Shape growth and market-expansion strategies through integrated legal guidance
- Lead complex commercial contracting strategy, deal structures, and negotiations
- Align intellectual property strategy with innovation and competitive positioning
- Provide counsel across regulatory, trade, sustainability, and data privacy considerations
- Balance risk with business opportunity in highly technical, regulated environments
- Partner cross-functionally with commercial, R&D, and operations leaders
- Coordinate with internal legal colleagues and external counsel to deliver consistent, business-focused solutions
- Improve legal processes using continuous-improvement and scalable frameworks
Required Background
- J.D. with active U.S. bar membership and ability to operate as in-house counsel
- 10+ years of progressive legal experience in commercial, IP, regulatory, or related matters
- Experience supporting global, multi-business organizations
- Strong business acumen and ability to enable growth through practical legal judgment
- Demonstrated credibility advising senior leadership
- Ability to prioritize high-impact work in fast-moving environments
- Excellent communication skills β able to translate complex legal concepts into clear business guidance
- Comfort working in ambiguity and navigating novel legal challenges
- Ability to travel ~10% (including international)
Preferred Experience
- Exposure to technical or regulated industries (e.g., energy, life sciences, medical devices, advanced manufacturing, or consumer products)
- Strength in commercial contracting with complementary IP and/or regulatory experience
- Continuous-improvement mindset and experience simplifying processes
Work Arrangement
Hybrid schedule based near Elkton, Maryland (approximately four days onsite per week).
Our client in Newark, DE is seeking a Debt Recovery Specialist to join their team for their upcoming training class in March and April.
This is a temp to hire position with a varying schedule of 8am to 5pm Monday-Friday, however, required to work two nights a week from 12pm to 9pm with rotating Saturdays 8AM-12PM.
This position offers $16/hr.
Essential Duties:
- Achieve department standards, goals, and work minimum accounts per hour as set by management through continuous efforts to contact clients and collect on debtor accounts while performing all phases of skip tracing work
- Follow up on all accounts/payment arrangements until paid, settled, cured from delinquency, or deemed uncollectible by management
- Keep accurate records and documentation of activity on accounts worked through policies and procedures as set forth by the company
- Adhere to and abide by all regulations as set forth by the FDCPA
- Any other duties as assigned by General Manager or Section Manager
Qualifications & Skills:
- Must be available to attend and complete entire training program
- Required to work 2 nights per week until 9pm
- Strong customer service, written, and oral communication skills required
- Ability to work well under pressure, independently, and meet deadlines
- Experience in agency or bank recovery, and knowledge of the FDCPA and credit bureau reports (preferred)
- Highly motivated and proactive
If you have previously registered with us, please call our office at 3 so that we can update your information with you.
If you are interested in signing up with J & J Staffing Resources today, please copy and paste the link below into your web browser to get started.
Job Summary:
This position has the responsibility for basic aspects of the products manufactured and/or the equipment at the Terumo Medical Corporation (TMC) Elkton, MD facility in terms of performance, safety, reliability, and quality. The work performed involves investigating, planning and implementing changes to support alteration of existing product, introduction of new products, and improvements to manufacturing processes.
Job Details:
- Comply with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments. Maintain and follow TMC Quality System requirements; including but not limited to understanding of change control, validation, documentation practices, and design control requirements.
- Work directly with machine operators and manufacturing technicians to provide technical support in the daily operation, maintenance, and troubleshooting of manufacturing process and equipment.
- Generate, approve, organize, and maintain technical documentation AND/OR develop safe and efficient procedures in accordance with document and data control practices.
- Train production personnel in equipment operation and safe work practices.
- Support production through daily interaction with operational personnel and Engineering team members.
- Plan and implement equipment upgrade projects focused on continuous improvement and obsolescence.
- Working collaboratively with various operations and engineering functions to execute process and equipment validations.
- Participate in project team meetings in order to provide ideas, methods, or processes for performance improvement.
- Maintain positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors.
- Performs other job related duties as assigned.
Position Requirements:
- Knowledge, Skills and Abilities (KSAs)
- Typically requires an AA degree in a related field or demonstrated relevant work experience.
- Typically requires exacting attention to work being performed.
- Considerable standing, reaching, pulling, stooping, etc., with occasional assistance lifting of weights up to 100 lbs.
- Excellent mechanical skill with the ability to rapidly assimilate knowledge of the controls systems or molds to effectively troubleshoot, repair, and/or develop processes for the installation or upgrading of new equipment and/or molds.
- Ability to make precise adjustments and measurements to delicate equipment/molds.
Knowledge, Skills, Abilities
- Typically requires an Electrical Technology AAS degree or demonstrated relevant work experience.
- Knowledge of Industrial controls components, motors, PLCs, HMIs and robots.
- Familiar with NFPA 70 (NEC) and NFPA 79
- Ability to read and update electrical schematics
- Strong electrical troubleshooting skills and use of measurement tools and other calibrated devices
- Considerable standing, reaching, pulling, stooping, etc., with occasional assistance lifting of weights up to 100 lbs.
- Excellent electrical skills with the ability to support the installation and troubleshooting of controls components, vison systems, and high precision measurement devices for industrial equipment upgrades or replacement..
- Understanding of machine change orders, equipment installations and functional verification of industrial manufacturing equipment. Ability to make precise adjustments and measurements to delicate equipment.
Experience:
- Experience in medical device industry and manufacturing environment a plus.
- Certified electrician or electrical skilled trades
- Building and wiring electrical control panels
- Experience with data networking
- PLC ladder logic and configuring electrical components
Benefits and Compensation
We provide competitive and comprehensive benefit options that allow you to design your own plan based on your individual needs which include: paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. This is an hourly position in the range of $31.00 - $45.00 per hour.
Employee Value Proposition
We believe that the future is bright for everyone at Terumo. We work with the future in mind to generate lasting change, create a bigger impact and produce greater outcomes for today, and for decades to come.
At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat β progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, sustainable solutions for patients.
Join us, and help shape wherever we go next!
Advancing healthcare with heart
Essential Functions
- Support project teams by actively participating in group and project meetings.
- Develop and execute application tests.
- Coordinate multiple projects using knowledge of chemistry, raw materials, and analytical techniques.
- Collect and analyze test data to diagnose, explain, and resolve technical issues.
- Prepare detailed technical reports outlining testing procedures, findings, and recommendations; communicate results to the supervisor.
- Operate and maintain laboratory equipment by following operating procedures, troubleshooting issues, managing supplies, performing preventive maintenance, and scheduling repairs.
- Assist Product Stewards with product line support activities.
- Maintain and update product documentation.
- Provide product recommendations and treatβrate guidance.
Role Requirements
- Bachelor's degree in Chemistry preferred; degrees in other physical sciences will also be considered.
- Laboratory experience is a plus.
- Strong communication skills, including effective oral, written, and presentation abilities.
- Proficiency with Microsoft Excel, Word, PowerPoint, Project, and Outlook.
- Demonstrated experience performing chemist responsibilities, with proven critical-thinking and problemβsolving skills.
Position Title: Senior Manufacturing Engineer
Work Schedule: 2nd shift - 3 PM - 11 PM
Location: Newark, DE 19702
Onsite position
Position Summary: The Manufacturing Engineer 3 Senior Manufacturing Engineer provides a key technical interface to a critical contract manufacturing relationship. The contract manufacturer provides a system consisting of electromechanical capital equipment as well as high-volume sterile disposables.
Key Responsibilities:
- Create and execute validation plans, including IQ of process equipment and OQ and or PQ of manufacturing processes.
- Lead manufacturing implementation of sustaining design initiatives.
- Detect, conceptualize, and execute improvement opportunities using a series of Lean and related tools and methodologies.
- Distill complex technical situations into meaningful summaries that are digestible by various stakeholders.
- Lead troubleshooting exercises to quickly get to solutions.
- Create and revise essential documents such as process flowcharts, PFMEA, and Process Control plans.
- Practice LEAN techniques and be able to facilitate lean kaizens.
- Interface with contract manufacturing staff and management to ensure that plans are followed and risks are mitigated.
- Work effectively with other functions such as research and development, Procurement, Design Quality Assurance, Regulatory Affairs, and Field Service in completion of duties and communication of relevant information.
- Interface with suppliers and Quality Engineering to resolve supplier quality issues.
- Monitor quality reports and field performance of assigned product line, identify trends, investigate problems and implement corrective actions.
- Actively supports and adheres to the Quality Policy and Quality System procedures.
- Other duties relating to above as may be required.
Qualification & Experience:
- Medical device industry experience
- Extensive validation experience, including employment of sound statistical approach and authorship of solid protocols and or reports.
- Advanced inter-personal skills, communication and emotional awareness is key to be successful in this role.
- Quick learner, driven and not afraid to experiment.
- Ability to manage projects and lead and coordinate cross-functional teams.
- Thorough understanding of Lean Manufacturing principles required 5S, Value Stream Mapping, Kanban, SMED, GEMBA mindset, KPI development and management.
- Good understanding of product lifecycle management PLM applications such as AGILE and ERP systems such as ORACLE, SAP or BAAN. ORACLE is preferred.
- Experience with LABVIEW highly preferred.
- Experience with computer-aided design software required, Solid works preferred.
- B.S. Engineering preferably in Mechanical, Electro-Mechanical, Electrical, or Industrial Engineering
- 7or more yearsβ experience in Manufacturing and or Manufacturing Engineering with working knowledge of electro-mechanical sub-assemblies.
Registered Nurse (RN) Pediatric Home Health
Sign-On Bonus Opportunity!
Eligible candidates may qualify for a $100 sign-on bonus* as part of their total compensation package. Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
- Weekly Pay and Direct Deposit
- Paid Time Off (PTO) and flexible scheduling
- Medical, Dental, and Vision Insurance
- 401(k) Retirement Plan
- Employee Referral Bonus Opportunities
- Career Advancement Opportunities
- Training and Competency Development
- Respiratory Therapists on Staff to Provide Training and Mentorship
- 24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
- Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
- 24/7 on-call clinical support whenever you need it
- Training and competency support for high-acuity care
- Clear care plans and physician orders
- PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
- A dedicated team focused on nurse safety and success
Requirements
- Valid Delaware RN License or Multistate License
- Physical within one year
- PPD or TB Blood Test (QF)
- Valid BLS CPR card (obtained in person not online)
- Valid driver's license
- G-tube, trach, vent experience or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply. Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.
#APPNUCLAY #RDNUCLAY
Salary:
$7 $91520.00 / year
Licensed Practical Nurse (LPN) Pediatric Home Health
Sign-On Bonus Opportunity!
Eligible candidates may qualify for a $100sign-on bonus as part of their total compensation package. Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care in Delaware
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients and constant interruptions, you provide one-on-one care in the home, allowing you to focus fully on your patient and deliver care with confidence and consistency.
In this role, you'll support pediatric patients with skilled nursing needs while working closely with a registered nurse and clinical leadership. LPNs who thrive here value meaningful patient relationships, clear direction, and the reassurance of knowing support is always available when needed.
If you're an LPN looking for a role that offers stability, support, and the ability to make a real difference in a child's life, this position was designed with you in mind.
Care Options for Kids Benefits
- Paid Time Off (PTO) and flexible schedule
- Medical, dental, and vision coverage
- 401(k) retirement plan
- Weekly pay and direct deposit
- 24/7 On-Call for support
- CEU credits
- Training opportunities
- Preceptor Program
- Nurse Referral Bonus
Support That Keeps You Safe and Confident
- Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
- 24/7 on-call clinical support whenever guidance is needed
- Clear plans of care with RN oversight
- PPE provided in every home, including masks, gloves, and hand sanitizer
- Care delivered in alignment with CDC safety guidelines
- A clinical team focused on nurse safety and success
Requirements
- Valid Delaware LPN License or Multistate License
- Physical within one year
- PPD or TB Blood Test (QF)
- Valid BLS CPR card (obtained in person not online)
- Valid driver's license
- G-tube, trach, vent experience or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply. Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.#APPNUCLAY #RDNUCLAY
Salary:
$58240.00 - $70720.00 / year