Jobs in Clayton, MO
1,721 positions found — Page 4
USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; A combination of general work experience AND successfully completed college education.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
Make arrests and exercise sound judgment in the use of firearms; or develop and maintain contact with a network of informants.
A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., Or will receive a bachelor's degree with Superior Academic Achievement.
Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Citizen to apply for this position.
S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .
If you have questions about the application process, contact a recruiter through the U.Border Patrol page: /s/usbp .
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security’s Air Dominance division is hiring Experienced, Senior Guidance Navigation and Control (GNC) Engineers in Hazelwood, MO.
Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47.
Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers’ overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.
Position Responsibilities:
Define Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level
Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model
Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers
Design flight control laws using modern linear control design techniques and tools to achieve design and performance targets
Use advanced nonlinear analysis to assess and refine the control law design
Perform model validation against test data to inform and improve the accuracy of the simulation environment
Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope
Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program
Support flight simulations including desktop, software, and real time simulations
Support hardware in the loop development and testing
Support flight testing planning and execution
Lead design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations
Train and coach others
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
5 or more years' related work experience or an equivalent combination of technical education and experience
3+ years of experience with Guidance Navigation and Control engineering
Experience using Matlab/Simulink or MatrixX to model systems
Preferred Qualifications (Desired Skills/Experience):
Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range (Level 3): $115,600 - $156,400
Summary pay range (Level 4): $142,800 - $193,200
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a highly skilled and experienced engineer to serve as the Signature Assurance and Verification Lead.
This role is pivotal in leading the Signature Assessment and Verification (SAV) team for a new Air Dominance Program in St. Louis, Missouri.
The successful candidate will play a critical role in enabling stealth performance of advanced platforms through effective manufacturing and operational processes.
Key Responsibilities:
Team Leadership: Lead and mentor the SAV team, ensuring effective collaboration and performance.
Cross-Functional Collaboration: Work closely with the EM QA multi-discipline team to uphold quality assurance standards.
Process Development: Develop and validate processes utilizing diagnostic equipment for signature verification.
Testing and Troubleshooting: Conduct developmental testing, debugging, and troubleshooting for signature verification methods.
Quality Assurance Criteria: Define and establish QA test criteria for all signature verification tests.
Quality Review: Review work instructions for quality assurance and witness part conformance to standards.
Testing Oversight: Oversee QA testing and acceptance processes, ensuring compliance with specifications.
Data Management: Track signature verification tests and maintain comprehensive signature data test records.
System Level Correlation: Correlate and assess verification at the system level to validate lower system level tests.
Non-Conformance Management: Provide review dispositions for non-conformances and analyze trends to evaluate the effectiveness of corrective actions.
System Development: Assist in the development of a signature assessment system, including software and methodologies.
This position offers a unique opportunity to contribute to cutting-edge defense technologies and work in a dynamic team environment. If you are passionate about engineering and have the qualifications outlined above, we encourage you to apply.
Basic Qualifications (Required Skills and Experience):
Education: Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Experience: Proven experience in signature assessment, verification engineering, or a related discipline.
7+ years of relevant Low Observables design, integration, test or maintenance experience
Security Clearance: U.S. Top Secret Security Clearance (U.S. Citizenship Required).
Technical Skills: Proficiency in diagnostic equipment and signature verification methods.
Communication Skills: Strong verbal and written communication skills for technical documentation and stakeholder engagement.
Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required)
Preferred Qualifications (Desired Skills and Experience):
Advanced Degree: Master’s degree in Engineering, Physics, Math, or a related field.
Leadership Experience: Previous experience leading engineering teams in a defense or aerospace environment.
Project Management: Demonstrated ability to manage multiple projects simultaneously with strong organizational skills.
Technical Writing: Experience in creating specifications, procedures, and technical reports.
Data Visualization: Skills in data visualization and effective communication of results to diverse audiences.
Travel Flexibility: Willingness to travel as needed (up to 10%).
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 4: $136,850 - $185,150
Level 5: $164,900 - $223,100
Applications for this position will be accepted until Apr. 01, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Tapestry Solutions, A Boeing Company, brings over 30 years of industry experience designing, implementing, training, and supporting high-quality, cost-effective information technology and business intelligence solutions. With a dedicated team of approximately 500 professionals, we proudly serve 75 defense, commercial, and government clients across more than 50 U.S. locations and 9 countries worldwide.
As a trusted partner, our employees embody our core values by consistently delivering excellence, taking full ownership, and developing innovative solutions that enable critical missions and ensure the safety of our global customers and team members. Joining Tapestry Solutions means enjoying the best of both worlds: access to the vast resources of Boeing combined with the agility and people-focused, family-oriented culture of a small business where your contributions truly matter.
Tapestry Solutions, a part of Boeing Global Services (BGS), is seeking a Software Engineering Manager in Hazelwood, MO to join our Mission Planning team. The position is pivotal to the success of the Tomahawk Cruise Missile program as the team continues to grow. This position will oversee the program’s P&L as well as 15+ software engineers tasked with maintaining and transforming the Tomahawk Planning System. This position is ideal for someone motivated by a role that will help the U.S. and its allies advance their mission planning capabilities.
Position Responsibilities:
- Create and communicate a compelling vision for the team, inspiring others to achieve shared goals
- Apply strategic thinking skills, enabling the development and execution of long-term plans that align with organizational objectives
- Foster a culture of continuous learning and professional development, empowering team members to reach their full potential
- Execute sound judgment and decision-making capabilities, balancing data-driven insights with intuition to guide the team effectively
- Build strong relationships across departments, leveraging influence to drive collaboration and achieve common objectives
- Lead teams through change with resilience and adaptability, ensuring smooth transitions and maintaining high levels of engagement
- Set clear performance expectations and provides constructive feedback, driving accountability and high performance within the team
- Deliver results, utilizing metrics and KPIs to measure success and drive continuous improvement
- Responsible for program’s cost, schedule and performance as well as oversee the CDRL preparation and submission
- Meets or exceeds goals for productivity, quality and customer satisfaction
- Coaches, counsels, mentors and provides developmental opportunities and job assignments to enhance employee satisfaction and performance while expanding capabilities
Basic Qualifications (Required Skills/Experience):
- Active US Secret Clearance with the ability to obtain a Top-Secret Clearance
- 5+ years of experience with Agile software development methodologies
- 3+ years of experience formally managing software engineers
- Excellent oral and written communication skills
Preferred Qualifications (Desired Skills/Experience):
- 1+ years of domain experience with software engineering for government applications
- 1+ years of experience as a Program Manager
- 3+ years of experience developing and presenting recommendations to leadership
Drug Free Workplace:
We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
We strive to deliver a total rewards package that will attract, engage and retain the top talent. Elements of this package include competitive base pay and variable compensation opportunities.
We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location and date of hire.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary base pay range $140,000 - $172,000
Applications for this position will be accepted until Mar. 28, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a seasoned Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model.
The successful candidate will apply deep expertise in LO materials, integration, manufacturing, computational electromagnetic (CEM) modelling, and test support to design, build and test a representative pole model for an advanced next generation program in the St. Louis region.
Key Responsibilities:
Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration.
Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics.
Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components.
Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop.
Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations.
Prepare and execute data processing workflows to reduce, calibrate, and analyze measured RCS and related EM test data; combine simulation and measurement data for validation and design iteration.
Produce clear technical documentation: design descriptions, analysis reports, test plans, test reports, procedures, and presentation materials for program reviews.
Mentor junior engineers and support continuous improvement of LO design, test, and data processing practices.
Working Conditions and Physical Requirements:
Hands-on support in fabrication or test setups may be required.
Will require travel to other company locations, supplier facilities, fabrication shops, and test ranges (including anechoic chambers and outdoor ranges).
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
7+ years of professional experience working with low observable materials and technologies, including hands-on exposure to LO integration, design, manufacturing, and test.
Demonstrated experience using computational electromagnetic solvers (e.g., FEKO, HFSS, CST, WIPL-D, CARLOS, SENTRI, XPATCH or equivalent) for design and optimization of LO systems and RCS predictions.
Strong understanding of electromagnetic principles relevant to scattering, phenomena and Radar Cross Section.
Proven track record supporting fabrication and testing of LO components/assemblies and correlating measurements to models.
Proficiency in data processing and analysis of RCS/EM test data, including calibration, clutter and background rejection, and data visualization techniques.
Excellent technical writing skills with experience producing engineering reports, test plans, and test reports.
Effective verbal communication and collaboration skills; ability to lead technical discussions and interface with suppliers, customers, leadership and test facility personnel.
Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required)
Preferred Qualifications (Desired Skills and Experience):
Advanced degree (MS/PhD) in a relevant discipline.
Past experience with RCS pole models, and range testing.
Experience with material characterization techniques.
Knowledge of LO materials and application processes, as well as nondestructive inspection methods for LO components.
Familiarity with CAD tools and integration with CEM workflows.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $136,850- $185,150
Applications for this position will be accepted until Apr. 01, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security’s Air Dominance division is hiring Associate Guidance Navigation and Control (GNC) Engineers in Hazelwood, MO.
Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47.
Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers’ overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.
Position Responsibilities:
Assist in defining Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level
Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model
Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers
Support design of flight control laws using modern linear control design techniques and tools to achieve design and performance targets
Use advanced nonlinear analysis to assess and refine the control law design
Perform model validation against test data to inform and improve the accuracy of the simulation environment
Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope
Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program
Support flight simulations including desktop, software, and real time simulations
Support hardware in the loop development and testing
Support flight testing planning and execution
Participate in design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
2 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.
Experience with Guidance Navigation & Control engineering
Experience using Matlab/Simulink or MatrixX to model systems.
Preferred Qualifications (Desired Skills/Experience):
Active U.S. Secret Security Clearance or higher
Experience with simulation, system and component modeling
Experience with implementing algorithms in real time systems
Hardware in the Loop Simulator (HILS) experience
Prior experience in flight test support
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $93,500 – $126,500
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a highly skilled and motivated Experienced Low Observables Design & Integration Engineer to join our team in St. Louis, Missouri.
The ideal candidate will have a strong background in electromagnetic principles and extensive experience in integrating Low Observable (LO) materials and technologies. This role requires technical leadership and a proven track record in the design and testing of advanced Low Observable platforms.
Key Responsibilities:
Design & Integration of Low Observable surface features into an advanced next generation platform.
Collaborate with cross-functional teams to ensure the successful implementation of LO technologies.
Conduct analysis and simulations using advanced electromagnetic solvers to optimize LO performance.
Oversee the design, development, and testing of Low Observable materials and technologies.
Provide technical leadership and mentorship to team members.
Develop and maintain documentation related to LO integration processes and methodologies.
Stay current with industry trends and advancements in Low Observable technologies.
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Minimum of 5 years of experience of relevant Low Observables design, integration or test experience.
Minimum 5 years of experience integrating Low Observable materials and technologies.
Strong understanding of electromagnetic principles.
Proficiency in using advanced electromagnetic solvers.
Familiarity with materials science as it relates to Low Observables.
Excellent communication and interpersonal skills.
Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required)
Preferred Qualifications (Desired Skills and Experience):
Demonstrated ability to lead technical teams and projects.
Master’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Physics or a related field
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $112,200 - $151,800
Applications for this position will be accepted until Mar. 19, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking an experienced Engineer to join the Signature Integrity Team in St. Louis, Missouri, as a Supportable Low Observable (SLO) Lead Engineer.
This role is critical for the development of tools and processes required to sustain stealth platform signature performance on advanced Air Dominance platforms.
The successful candidate will provide technical leadership to a team of SLO engineers, ensuring the effective execution of SLO plans while maximizing operational availability and minimizing life cycle costs.
Key Responsibilities:
Lead the SLO team in maximizing operational availability and minimizing life cycle costs of Boeing products with low observable design features.
Analyze customer and system requirements to develop architectural approaches and detailed specifications for various products.
Develop high-level and detailed designs consistent with requirements and specifications.
Validate designs through various methods of review, testing, and analysis.
Implement supportability guidelines early in platform design.
Share SLO experience and methods across low observable programs.
Identify improvements in designs, materials, tools, or methods to reduce life cycle costs for users.
Mature data collection and analysis tools to efficiently direct low observable maintenance actions.
Collaborate with materials & processes, product support, and reliability & maintainability engineers.
Manage multiple projects simultaneously, demonstrating strong organizational and documentation skills.
Prepare technical specifications, procedures, and reports.
Communicate results and status to project stakeholders, including government and suppliers.
Some travel (up to 10%) may be required to support fabrication and testing activities.
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
10+ years of experience working with Low Observable (LO) Engineering Processes.
10+ years of work experience in Reliability & Maintainability, Product Support, or Materials & Processes Engineering.
Strong analytical skills with the ability to develop innovative solutions to engineering challenges.
Ability to obtain a Top Secret clearance and Special Program Access (U.S. Only Citizenship Required).
Preferred Qualifications (Desired Skills and Experience):
Proven track record of leading engineering teams and managing complex projects.
Excellent communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams.
Familiarity with data visualization tools and techniques for effective communication of results.
Experience in technical writing and documentation for engineering specifications and reports.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 4: $136,850 - $185,150
Level 5: $164,900 - $223,100
Applications for this position will be accepted until Apr. 01, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Mercy Therapy Services - Outpatient
9964 Kennerly Rd
Education: Current State license of Physical Therapy. Bachelor, Master of Science in Physical Therapy or Doctorate of Physical Therapy
Licensure: Current/Temporary license of Physical Therapy in state of practice
Certifications: BLS certified
Preferred Experience: Six months to one year experience is preferred for Rehabilitation Physical Therapist. Prefer experience with care for adult and geriatric patients
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
The Physical Therapist Assistant assists the Physical Therapist in the provision of physical therapy. The incumbent shall perform physical therapy procedures and related tasks that have been selected and delegated by the supervising Physical Therapist. The Physical Therapist Assistant may modify a specific treatment procedure in accordance with changes in patient status within the scope of the Physical Therapist's established treatment plan. The incumbent documents patient progress notes. The incumbent shall safety and effectively provide physical therapy procedures as directed by their supervising Physical Therapist. The incumbent shall address appropriately the age specific needs for all patients. The incumbent will treat patients and families with respect and dignity. Patients pain will be assessed and treated according to the departments pain management policy. It is the philosophy of Mercy Hospital to optimize patients' comfort while they are in the hospital. The incumbent will identify and report any patient safety issue when identified. The Physical Therapist Assistant shall provide technical assistance and direction to the Physical Therapy aide and coordinates the workload in the department as directed.Position Details:
Qualifications
Education: Associate degree
Licensure: Current license to perform as a Physical Therapist Assistant from the Board of Physical Therapy in the applicable State of practice.
Experience: Physical Therapist Assistant may be entry level.
Certifications: American Heart Association Health Care Provider Basic Life Support Certification.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Mercy Hospital South
10010 Kennerly Rd, St. Louis, MO 63128
Education: Bachelor, Master of Science in Physical Therapy or Doctorate of Physical Therapy.
Licensure: Current/Temporary license of Physical Therapy in state of practice.
Certifications: BLS certified. Required certifications must be current before assigned to care for patients independently.
Preferred Experience: Six months to one year experience is preferred for Rehabilitation Physical Therapist. Prefer experience with care for adult and geriatric patients.
Physical Requirements:
• Position requires the ability to push, pull, and/or lift 50 lbs on a regular basis.
• Position requires prolonged standing and walking during each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Location: Mercy Hospital South - 10114 Kennerly Rd, St. Louis, Missouri 63128
Schedule: Full-Time | 36 hours/week
Position Details:
As a Patient Care Associate (PCA):
- Record vital signs and enter data into the electronic medical record system
- Assist patients with daily needs including meals, bathing, toileting, mobility, and transportation
- Provide clerical support as needed
As a Patient Care Technician (PCT): Includes all PCA responsibilities, plus:
- Perform phlebotomy and collect blood cultures
- Administer enteral feedings
- Provide wound care
- Remove IVs and Foley catheters
- Perform tracheostomy care and suctioning
Qualifications:
- Education: High school diploma, GED, CNA/CPTC certification, or enrollment in a healthcare career program through high school. Current Mercy co-workers are also eligible.
- Experience: No prior experience required.
- Physical Requirements:
- Ability to push, pull, and lift up to 50 lbs regularly
- Prolonged standing and walking during shifts
- Ability to grip, reach, bend, kneel, twist, and squat to perform duties
Training & Development:
- Mercy’s PCA training program is an accredited Department of Labor Apprenticeship, offering hands-on experience and valuable credentials in a supportive healthcare environment.
- If you have no prior experience, Mercy provides a 175-hour training program that meets Department of Health and Senior Services requirements. This must be completed within 90 days of hire.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
- Assist with initial assessment on each patient upon receiving direction from O.T.R./L. and according todepartmental policies and procedures.
- Document the course of patient care including progress notes and the continuing need for treatment according to departmental policy.
- Administer appropriate modalities, exercise regimes, or treatment procedures according to departmental policies and procedures on standards of treatment care.
- Maintain progress notes and departmental records on each patientaccording to departmental policies regarding documentation and charges.
- Participate in promoting education within the department
- Demonstrates knowledge of special needs and behaviors ofspecific age groups to include neonatal, pediatric, adolescent, adult and geriatric.
- Perform miscellaneous job duties observed as directed by the Inpatient PhysicalMedicine Supervisor.Position Details:
Location:
Mercy Rehabilitation Hospital South
10114 Kennerly Rd
St. Louis, MO 63128
Education: Must be a graduate of an accredited Occupation Therapist Assistant program.
Licensure: Current license for Certified Occupational Therapy Assistant or eligible for licensure in state of practice.
Experience: One year experience is preferred but will consider new graduates.
Certifications: BLS certified. Required certifications must be current before assigned to care for patients independently.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Mercy South Outpatient Therapy
Education: Master's Degree in Speech/Language Pathology
Licensure: Current or provisional Speech Language Pathologist license in applicable State of practice.
Certifications: Certification from American Speech and Hearing Association within 1 year of hire, extension at discretion of leader and clinical fellowship supervisor. BLS certified. Required certifications must be current before assigned to care for patients independently.
Other: Must be able to respond to emergency situations.
Preferred Experience: One year of experience. Experience in caring for patients of all ages preferred.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Performs direct patient care in all aspects of respiratory care, according to physician's orders. Consults physicians on effectiveness of therapy. Acts as an advanced resource person for physicians and nursing on respiratory care. Performs duties as assigned.Position Details:Additional Job DescriptionMercy South
Registered Respiratory Therapist
*Will consider Certified Respiratory Therapists*
Part Time - 12 hours/week
$10,000 Sign on Bonus Available
Overview:
Performs direct patient care in all aspects of respiratory care, according to physician's orders. Consults physicians on effectiveness of therapy. Acts as an advanced resource person for physicians and nursing on respiratory care. Performs duties as assigned.
Qualifications:
Education: Graduate of CoArc approved Respiratory Care program.
Licensure: Meets state licensure requirements and has a current Respiratory Care Practitioner (RCP) license.
Certifications: Hold the Registered Respiratory Therapist (RRT) credential awarded by the National Board for Respiratory Care (NBRC). For co-workers who work in the Emergency Room PALS is required.
Other: Physical demands are attached plus push, pull, and grip up to 50 lbs. Plus, pinch up to 10 lbs., kneel, crouch, and crawl minimally.
Equipment Used: All appropriate respiratory care devices.
Preferred Education: Acute Cardiac Life Support (ACLS)Preferred Licensure:
Preferred Experience: Prefer critical care experience.
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Mercy Hospital South
10010 Kennerly Rd, St. Louis, MO 63128
Education: Master's Degree in Speech/Language Pathology.
Licensure: Current or provisional Speech Language Pathologist license in applicable State of practice.
Certifications: Certification from American Speech and Hearing Association within 1 year of hire, extension at discretion of leader and clinical fellowship supervisor. BLS certified. Required certifications must be current before assigned to care for patients independently.
Other: Must be able to respond to emergency situations.
Preferred Experience: One year of experience. Experience in caring for patients of all ages preferred.
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Mercy Rehabilitation Hospital South
10114 Kennerly Rd
St. Louis, MO 63128
Schedule:
Weekend Position - 24 hours/week
Qualifications
Education: Graduate of an accredited Occupational Therapy program.
Licensure: Current occupational therapy license or eligibility within the hiring state.
Certifications: Current BLS through the American Heart Association.
Other: Must be able to respond to emergency situations.
Preferred Certifications: National Board Certification in Occupational Therapy.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Mercy Therapy Services - Outpatient
7345 Watson Rd
Education: Current State license of Physical Therapy. Bachelor, Master of Science in Physical Therapy or Doctorate of Physical Therapy
Licensure: Current/Temporary license of Physical Therapy in state of practice
Certifications: BLS certified
Preferred Experience: Six months to one year experience is preferred for Rehabilitation Physical Therapist. Prefer experience with care for adult and geriatric patients
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Provides patient care by organizing and conducting medically prescribed programs in order to achieve maximum potential. Displays treatment skills practicing within the scope of State Practice Act and in compliance with all rules and regulations with National Board and governing bodies in the state of practice. Promotes growth and development of department by assisting in special projects and/or coordinating activities in patient care programs.Position Details:
Mercy South Outpatient Therapy
Prefer a Certified Hand Therapist
Prefer 2+ years Occupational Therapist experience
Qualifications
Education: Graduate of an accredited Occupational Therapy program
Licensure: Current Occupational Therapy license
Certifications: Current BLS through the American Heart Association
Other: Must be able to respond to emergency situations
Preferred Certifications: National Board Certification in Occupational Therapy
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Responsible for providing every aspect of Respiratory Care to all patients. In communicating with the patients, families, visitors and other employees, a caring, friendly, personal and professional approach is expected. Performs related duties as assigned.Position Details:Mercy South Registered Respiratory Therapist
*Will consider Certified Respiratory Therapists*
Full Time - 36 hours/week, Nights Preferred
$10,000 Bonus for RRTs
Overview:
Performs direct patient care in all aspects of respiratory care, according to physician's orders. Consults physicians on effectiveness of therapy. Acts as an advanced resource person for physicians and nursing on respiratory care. Performs duties as assigned.
Qualifications:
Education: Graduate of CoArc approved Respiratory Care program.
Licensure: Meets state licensure requirements and has a current Respiratory Care Practitioner (RCP) license.
Certifications: Hold the Registered Respiratory Therapist (RRT) credential awarded by the National Board for Respiratory Care (NBRC). For co-workers who work in the Emergency Room PALS is required.
Other: Physical demands are attached plus push, pull, and grip up to 50 lbs. Plus, pinch up to 10 lbs., kneel, crouch, and crawl minimally.
Equipment Used: All appropriate respiratory care devices.
Preferred Education: Acute Cardiac Life Support (ACLS)Preferred Licensure:
Preferred Experience: Prefer critical care experience.
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): Registered Respiratory Therapist, RT, RRT, CRT
Registered Respiratory Therapist, RT, RRT, CRT
