Information Technology Jobs in Snohomish County, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.

• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.

• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.

• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.

• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.

• Clean silk screens and maintain tools and equipment to ensure quality printing.

• Mix and match paint to established color samples, ensuring consistency and accuracy.

• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.

• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.

• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.

• Check ink color using a color spectrometer and make adjustments as needed to match specifications.

• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.

• Handle and dispose of hazardous materials in compliance with safety regulations.

• Maintain records of work performed and refile work packets in the ink room filing cabinet.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience silk screen printing.

• Experience mixing and color matching water based inks.

• Experience handling and disposing of hazardous materials per government regulations.

• Ability to recognize colors.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. 

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.  

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).

• Experience working with overhead crane.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program  

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Technical Designer

Everett, WA/ Seattle, WA/ Auburn, WA/ Renton, WA/ Portland, OR

Onsite

Technical Designer

- Applies fundamental drafting principles and design concept understanding to support solutions to product/process issues as they occur real-time in the fabrication flow. Create drafted parts and product structures to support operational and quality concerns.

- Performs model definition changes within the defined engineering based on engineering input. Translating the engineer's conceptual ideas and feedback into physical part geometry and assembly definition.

- Engages in cross functional, collaborative environments across the life cycle of the products to support design change and improvement.

- Maintains technical excellence in performing work with career intent to progress into technical designer job role.

- Participate and have the ability to learn in the real-time, fast pace, agile environment with a positive attitude. Work may be first, second, or third shift within a standard or alternate work week; as well as some weekend and/or daily overtime

Position Responsibilities:

- Provides materials and process support to and systems design teams throughout the full life cycle of the airplane from design to production to fleet support. Activities include definition of electrical, electronic, and electromechanical components used across products.

- Reviews electrical component materials and process specifications and other engineering documents used to control design, certify and produce systems hardware.

- Identifying impacts of non-conformances associated with electrical components and corrective/preventative actions for future avoidance.

- Conducts engineering lab / failure analysis to help determine cause and corrective action of failed electrical components

- Leads in evaluation of emerging technologies for potential application to future BCA products enabling a competitive advantage.

- Leads or collaborates with multiple engineering teams, Design, Stress, Quality, Manufacturing, and Suppliers to solve a variety of materials and process challenges throughout the full life cycle of the airplane.

- Produces requirements, specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes used to enhance the full life cycle.

Basic Qualifications:

- Associate degree and typical experience in drafting classification (or combination of education and experience), basic understanding and usage of computer aided design, basic understanding of design product structure (details, parts, assemblies, installations), understanding in machining of metallic parts.

- 9+ years of experience working with aerospace design, including experience working with detail and assembly parts

- CATIA or equivalent solid modeling experience

- Integrated Visualization Tool (IVT) use and experience

Preferred Qualifications:

- Problem solving skills

- Investigative skills

- Multi-tasking skills

- Project management experience working with projects at various stages and coordinating with multiple organizations

* Experience working in lab environments

Education / Experience: AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool - Milling Machine Operator to join our Fabrication team in Everett and Renton, Washington.

As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards. You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance. Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements

• Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations

• Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized

• Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints

• Assist planners or programmers in determining the final numerical control program as authorized

• Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles

• Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices

• Load, preload, and manually position fixtures at designated program stops

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting

• Work in environments that may involve contact with metals, solvents, and coolants

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ Years of experience using precision measuring tools

• 1+ Years of experience as a machine operator, writing and editing CNC programs

• 1+ Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications

• 1+ Years of experience reading and interpreting blueprint and assembly instructions or drawings

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools

• Ability to lift, push, and pull up to 35 pounds

Preferred Qualifications:

• Experience working with and around hazardous materials (while using the proper protective equipment)

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Flexible scheduling with a side of always feeling valued. A job at McDonald's offers a job combo that fits YOU.

Perks & Benefits:

• Competitive pay between $21.00 per hour - $23.87 per hour
• Employee discounts and free meals
• Paid sick leave and/or paid time off
• Tuition reimbursement and/or educational assistance
• Training and advancement opportunities
• Weekly direct deposit
• 401k plan*
• Medical, dental, and vision benefits*

And much, much more!

*Available to full time employees in select locations.

This role is vital to the guest experience because you'll:

• Lead the experience: Check in with guests and make sure they are enjoying themselves
• Be the solution: Handle guest concerns and provide resolve to their satisfaction
• Understand that teamwork is key: Work hand in hand with your team to maintain a welcoming, friendly, and clean restaurant environment
• Be in the know: Offer expert insight into promotions and benefits of utilizing the McDonald's App, Mobile Order & Pay features

To be successful in this position, you'll need:

• A humble and hospitable demeanor;
• Passion for helping and serving others (customers and fellow team members);
• A desire to learn and grow; and
• The ability to communicate effectively and anticipate customer needs

So, what's your job combo?

Equal Employment Opportunity and Our Value of Inclusion

McDonald's is committed to providing equal employment opportunities and fostering an inclusive work environment. We do not discriminate on the basis of race, religion, color, national origin or ancestry, sex, gender, gender expression, sexual orientation, pregnancy, age, marital status, veteran status, physical or mental disability status, genetic information, citizenship or any other class characteristic protected by federal or applicable state law. In accordance with applicable laws, McDonald's provides reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of their job and to enjoy equal benefits and privileges of employment. Additionally, McDonald's provides reasonable accommodations for qualified applicants and candidates with disabilities. If you need assistance accessing or reading this job posting or otherwise feel you need an accommodation during the application or hiring process, please contact .

This job posting contains general information about working in this restaurant. This job posting is not a complete description of all duties of the job. People who work in this restaurant perform several different tasks every shift and this posting does not list every essential function of the job.

Title: Manufacturing Engineer

Duration: 6+ Months

Location: Everett ,WA

Description:

Regular and predictable attendance is required

Primary Responsibilities:

• Assists in the development and implementation of production and tooling methodologies.

• Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions.

• Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build.

• Assists in implementing manufacturing plans.

• Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts.

• Assists in the implementation of Lean principles and technologies.

• Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

This position is a Production Engineering role and requires direct interfacing with the people, parts, and equipment on the production floor. A typical day could include:

• Spending up to 8 hours on feet standing/walking on the production floor

• Climbing ladders or stairs to access equipment or airplane sections

• Working at heights or in tight spaces

• Wearing required PPE

Required Skills:

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry

• Experience working in an engineering discipline.

• Experience working in a manufacturing/ production environment.

Preferred Skills:

• 5 or more years related work experience or an equivalent combination of education and experience.

• Experience in Electrical and Electronics Engineering

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world’s most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days are the same.

About the Role You're Considering

As a Senior Employee Development / Training Specialist as part of our Industrial Operations - Training team, you will play a pivotal role in shaping the technical capabilities of aerospace manufacturing workforce.

In this role you will play a key role in:

• Leading projects designed to produce high-quality educational deliverables that enhance technical proficiency across aerospace manufacturing disciplines
• Conducting comprehensive learning requirements analysis and establishing clear, measurable learning objectives aligned with business needs
• Delivering specialized content in one or more areas of Aerospace Skills expertise (Electrical, Structural, Seal, Quality, Systems, etc.) and assessing effectiveness based on established learning objectives
• Facilitating dynamic learning events through various delivery methods, customizing programs to maximize knowledge retention and practical application
• Performing as a Subject Matter Expert (SME) to provide training consultation services and strategic guidance to stakeholders
• Coaching and developing less experienced instructors, conducting Train-the-Trainer sessions to qualify additional instructors
• Monitoring stakeholders' operating environment and key business measures to continuously improve training effectiveness
• Emphasizing safety precautions in all training provided while maintaining a positive and productive learning environment
• Collaborating with cross-functional teams to develop creative training enhancements, guided skills practices, job aids, and activities that support learner success
• Identifying and validating training effectiveness through observation, measurement, testing, and analysis to ensure learning objectives are met

Must Have Qualifications

• 5+ years of experience in aerospace manufacturing operations and/or manufacturing support, with demonstrated expertise in specialized technical areas
• US Citizen
• Ability to work onsite in Everett, WA
• Proven experience as a coach, instructor, or employee development specialist with the ability to lead and mentor others
• Experience in designing and employing leadership development courseware and/or curriculum
• Specialized knowledge in one or more aerospace disciplines such as Structural, Electrical, Repair, Functional Test, Seal, or Systems
• Experience working with detailed work instructions and interpreting complex blueprints and drawings
• Strong background in needs assessment, job analysis, and performance improvement methodologies
• Excellent communication and interpersonal skills with the ability to engage diverse audiences
• Demonstrated project management capabilities with a track record of delivering educational initiatives on time and within scope
• Ability to adapt teaching methods to accommodate different learning styles and technical backgrounds

The base compensation range for this role in the posted location is: $76,200.00 - $187,740.00

Capgemini provides compensation range information in accordance with applicable national, state, provincial, and local pay transparency laws. The base compensation range listed for this position reflects the minimum and maximum target compensation Capgemini, in good faith, believes it may pay for the role at the time of this posting. This range may be subject to change as permitted by law.

The actual compensation offered to any candidate may fall outside of the posted range and will be determined based on multiple factors legally permitted in the applicable jurisdiction.

These may include, but are not limited to: Geographic location, Education and qualifications, Certifications and licenses, Relevant experience and skills, Seniority and performance, Market and business consideration, Internal pay equity.

It is not typical for candidates to be hired at or near the top of the posted compensation range.

In addition to base salary, this role may be eligible for additional compensation such as variable incentives, bonuses, or commissions, depending on the position and applicable laws.

Capgemini offers a comprehensive, non-negotiable benefits package to all regular, full-time employees. In the U.S. and Canada, available benefits are determined by local policy and eligibility and may include:

• Paid time off based on employee grade (A-F), defined by policy: Vacation: 12-25 days, depending on grade, Company paid holidays, Personal Days, Sick Leave
• Medical, dental, and vision coverage (or provincial healthcare coordination in Canada)
• Retirement savings plans (e.g., 401(k) in the U.S., RRSP in Canada)
• Life and disability insurance
• Employee assistance programs
• Other benefits as provided by local policy and eligibility

Important Notice: Compensation (including bonuses, commissions, or other forms of incentive pay) is not considered earned, vested, or payable until it becomes due under the terms of applicable plans or agreements and is subject to Capgemini’s discretion, consistent with applicable laws. The Company reserves the right to amend or withdraw compensation programs at any time, within the limits of applicable legislation.

Disclaimers

Capgemini is an Equal Opportunity Employer encouraging inclusion in the workplace. Capgemini also participates in the Partnership Accreditation in Indigenous Relations (PAIR) program which supports meaningful engagement with Indigenous communities across Canada by promoting fairness, accessibility, inclusion and respect. We value the rich cultural heritage and contributions of Indigenous Peoples and actively work to create a welcoming and respectful environment. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law.

This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodation does not pose an undue hardship. Capgemini is committed to providing reasonable accommodation during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact.

Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process.

Click the following link for more information on your rights as an Applicant in the United States. is a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem.