Engineering Jobs in Waterford, MI

Under the supervision of the Director and/or Supervisors of the Buildings & Grounds Department, the employee installs, inspects, repairs and maintains machinery, mechanical equipment, hospital furnishings and grounds.

Minimum Education, Licensure / Certification and Experience Required.

• High school diploma or equivalent.
• Vocational school certificate.

• Journeyman's license in mechanical trade must be obtained within 6 months of start of position.

• Knowledge of electrical, plumbing, carpentry, and mechanics.
• Excellent customer service orientation skills necessary in order to deal effectively with various levels of hospital personnel, outside customers and community groups.

• Technical, vocational or on-the-job training in at least three of the following: HVAC, Electrical, Mechanical, Plumbing, Carpentry, Painting or Engine Repair.
• Three years related working experience in building maintenance.

• Responsible for the repair and/or replacement of components of plumbing and piping systems, including the cleaning of blocked drainage systems. Responsible for irrigation system maintenance and repair. Will not be responsible for new installation work. Will be able to solder pipe to 3/4" trade size for replacement
• Responsible for the repair and/or replacement of components of electrical systems, utilizing voltages of 120 Volts nominal or less. Will not be responsible for new installation work.
• Responsible for the repair and/or replacement of components of ceiling, wall, floor, door hardware and building hardware. Responsible for cleanliness of grounds, buildings, drives and parking lots. Will not be responsible for new installation work.
• Responsible for the maintenance, repair and installation of hospital equipment and furnishings, and for the replacement of defective parts or unsafe or malfunctioning parts.
• Responsible for the welding and soldering of sheet metal and other metal products as required.
• Responsible for correct material orders and amount requested. Utilize the department work order system to record time and material.
• Responsible for snow and ice removal. Maintains safe walking and driving conditions.
• Cleans and maintains work areas in a neat and orderly manner.
• Being available for "call-ins" and "on-call" status during inclement weather and for other emergency situations.
• Demonstrates and actively promotes an understanding and commitment to the mission of St. Joseph Mercy Oakland through performing behaviors consistent with the Trinity Health Values.
• Maintains a working knowledge of applicable Federal, State, and Local laws and regulations, the Trinity Health Organizational Integrity Program, including the Standards of Conduct, Code of Ethics, as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behaviors.
• Supports and conducts one's self in a manner consistent with customer service expectations.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

HCLTech is looking for a highly talented, self-motivated and Experienced Firmware Test Engineer to join it in advancing the technological world through innovation and creativity.

Job Title: Firmware Test Engineer

Job ID: 55383

Position Type: Fulltime

Location: Auburn Hills, MI

Core Responsibilities

• Design and develop Basic Software (BSW) and SoC‑level components for automotive ECUs.
• Develop, configure, and optimize Board Support Packages (BSPs) for various automotive SoCs.
• Implement, customize, and optimize low-level drivers for communication interfaces such as UART, SPI, I2C, GPIO, and interrupt controllers.
• Perform embedded OS bring‑up (Linux, FreeRTOS, RTOS), including kernel configuration, device trees, and bootloader customization.
• Conduct SoC-level debugging and issue resolution using tools such as JTAG, GDB, oscilloscopes, and logic analyzers.
• Collaborate with cross-functional automotive teams to ensure robust integration with ADAS, Autonomous Driving, IVI, and safety-critical systems.
• Apply embedded security best practices and support implementation of secure boot, encryption, and authentication mechanisms.
• Work within CI/CD pipelines to automate builds, code analysis, testing, and deployment for embedded software.
• Analyze SoC architectures from vendors like Renesas, TI, Intel, Qualcomm, and tailor BSW design to platform specifications.

Required Qualifications

• Bachelor’s degree or higher in Computer Science, Electrical Engineering, or related field (Master’s preferred).
• 8+ years of experience in BSW and SoC software design for automotive applications.
• Strong proficiency in C/C++ and embedded programming.
• Proven experience in SoC integration, BSP development, and low-level driver implementation.
• Solid understanding of SoC architectures, peripheral interfaces, and device drivers.
• Experience with embedded operating systems such as Linux, FreeRTOS, RTOS.
• Strong familiarity with tools such as Git, Make/CMake, and debugging tools like JTAG, GDB.
• Excellent communication, analytical thinking, and problem‑solving abilities.
• Experience with autonomous driving platforms or In-Vehicle Infotainment (IVI) architecture is a plus.
• Knowledge of embedded system security (authentication, secure boot, access control).

Pay and Benefits

Pay Range Minimum: $71000 per year

Pay Range Maximum: $108000 per year

HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You’ll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Embedded Software Engineer – Engine Controls GTM/AUTOSAR CDD development

Auburn Hills, MI

Full time Role

Customer wants Engineer having experience on Engine CDD Development using GTM timer module such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

Must to Have

• Experience with Infineon Generic Timer Module (GTM) for engine timing control.

• Understanding of digital signal processing concepts used in knock detection algorithms.

• Experience with AUTOSAR MCAL configuration using EB Tresos.

Key Responsibilities

• Develop Complex Device Drivers (CDD) for gasoline Engine Control Module (ECM/PCM) functions on ECU platform.

• Implement software for engine sensing and actuation including crank/cam position, engine speed, and direction detection.

• Support development of engine control features such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

• Implement above timing features using GTM-based timing and signal processing logic using modules such as TIM, TOM, ATOM.

• Integrate CDD logic with AUTOSAR BSW modules including NvM, RTE, OS, Digital IO, and Diagnostics.

• Support AUTOSAR BSW integration and ECU software architecture implementation.

• Work with MCAL drivers and support integration activities using EB Tresos Studio (modules such as ADC, DSADC, MCU, FEE, DMA, IRQ).

• Develop and debug software on Infineon AURIX TC38x microcontrollers.

• Support ECU software integration, testing, and debugging using Lauterbach Trace32 and ETAS INCA tools.

• Work closely with calibration, system, and hardware teams to support engine control feature development.

• Support issue analysis and root cause debugging during integration and validation phases.

Required Skills

• Strong Embedded C programming experience.

• Experience with ECM/PCM gasoline engine control software development.

• Hands-on experience in AUTOSAR BSW integration and CDD development.

• Experience with Infineon AURIX TC3xx (TC38x) microcontroller platform.

• Knowledge of engine sensing interfaces such as cam/crank sensors and injector/spark control mechanisms.

Role Overview

The BMS (Battery Management System) Architect – AUTOSAR BSW Development is responsible for defining, designing, and guiding the implementation of the BSW software architecture for Battery Management Systems based on the AUTOSAR Classic Platform.

This includes ownership of the AUTOSAR BSW stack integration, ECU architecture, safety concept alignment, and software interfaces for highvoltage battery functions such as SOC/SOH/SOE estimation, cell monitoring, diagnostics, thermal management, and communication.

The architect collaborates closely with system engineering, functional safety, hardware engineering, and platform software teams to ensure a compliant, scalable, and production-ready BMS software solution.

Key Responsibilities

• Define and maintain the AUTOSAR-based BMS ECU Software Architecture including BSW and CDD module distribution in multicore environment.
• Own BSW configuration & integration (MCAL, ECU Abstraction, Services, Communication stack).
• Ensure design is compliant with ISO 26262 (ASILD)
• Participate in safety work products: FMEDA, safety concepts
• Collaborate on cybersecurity requirements aligned with ISO 21434.
• Provide technical direction to AUTOSAR BSW developers and integrators.
• Act as technical liaison with OEM, Tier-1 suppliers, AUTOSAR vendors, and toolchain providers.

Required Skills & Qualifications

• Strong experience in AUTOSAR Classic Platform (BSW CAN Stack, MCAL, RTE, Multicore OS, MPU, SMU, NVM, Diagnostics like UDS, ZEV, OBD).
• Hands-on experience with tools: ETAS ISOLAR tool, EB Tresos, Vector CANdela, CANoe, INCA, PREEvision.
• Deep understanding of - Functional safety (ISO 26262), BMS high-voltage system behavior, MCU architectures (Infineon AURIX TC3xx)
• Strong embedded C expertise
• Strong communication and cross-functional leadership
• Ability to handle OEM discussions on architecture topics.

Job Title : BMS Architect – AUTOSAR & BSW Development

Location: Auburn Hills, MI

Duration: Full time

Role Overview

The BMS (Battery Management System) Architect – AUTOSAR BSW Development is responsible for defining, designing, and guiding the implementation of the BSW software architecture for Battery Management Systems based on the AUTOSAR Classic Platform.

This includes ownership of the AUTOSAR BSW stack integration, ECU architecture, safety concept alignment, and software interfaces for highvoltage battery functions such as SOC/SOH/SOE estimation, cell monitoring, diagnostics, thermal management, and communication.

The architect collaborates closely with system engineering, functional safety, hardware engineering, and platform software teams to ensure a compliant, scalable, and production-ready BMS software solution.

Key Responsibilities

1. Define and maintain the AUTOSAR-based BMS ECU Software Architecture including BSW and CDD module distribution in multicore environment.

2. Own BSW configuration & integration (MCAL, ECU Abstraction, Services, Communication stack).

3. Ensure design is compliant with ISO 26262 (ASILD)

4. Participate in safety work products: FMEDA, safety concepts

5. Collaborate on cybersecurity requirements aligned with ISO 21434.

6. Provide technical direction to AUTOSAR BSW developers and integrators.

7. Act as technical liaison with OEM, Tier-1 suppliers, AUTOSAR vendors, and toolchain providers.

Required Skills & Qualifications

1. Strong experience in AUTOSAR Classic Platform (BSW CAN Stack, MCAL, RTE, Multicore OS, MPU, SMU, NVM, Diagnostics like UDS, ZEV, OBD).

2. Hands-on experience with tools: ETAS ISOLAR tool, EB Tresos, Vector CANdela, CANoe, INCA, PREEvision.

3. Deep understanding of - Functional safety (ISO 26262), BMS high-voltage system behavior, MCU architectures (Infineon AURIX TC3xx)

4. Strong embedded C expertise

5. Strong communication and cross-functional leadership

6. Ability to handle OEM discussions on architecture topics.

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Manufacturing Process Engineer - Aerospace

About United CNC Machining

United CNC Machining specializes in precision mission critical machined components for aerospace and defense industries. Our state-of-the-art, climate-controlled facility operates with cutting-edge equipment and a commitment to zero-defect quality standards. We are a high mix, low volume supplier with high credentials. Click here for your dream job!

Position Overview

We are seeking a highly skilled Manufacturing Process Engineer – Aerospace. This position is crucial for ensuring that products meet engineering principles, safety regulations, and customer expectations. Compensation range - $34/hr - $44/hr

Core Responsibilities

• Design and develop manufacturing processes, ensuring they meet technical specifications and industry standards.
• Implement manufacturing processes, including selection of appropriate materials and technology.
• Conduct research and apply new technologies to enhance manufacturing efficiency and product performance.
• Break down engineering processes into individual operations to manufacture components for aerospace and defense industries.
• Ability to analyze and utilize 2D and 3D prints and models.
• Document set-up sheets and maintain accuracy as changes or improvements ae made.
• Communicate with Engineering Supervisor while new projects are in process.

Qualifications

• Degree in relevant engineering and/or 5+ years of Process Engineering experience required.
• Machining experience a plus.
• Proficient in AutoCAD, Mastercam or other computer-aided drafting tools.
• Experience within the Aerospace industry.

Work Environment & Physical Requirements

• Work performed in a clean, organized, controlled manufacturing setting

Why Join Us?

• 100% paid medical, dental, vision and life insurance.
• Best compensation package for qualified individuals.
• CNC machining of prototype and limited production components for defense and aerospace.
• High tech climate-controlled environment.
• Paid holidays and vacation.
• Extreme fitness center.
• Tobacco and vape free facility.

United CNC Machining is an Equal Opportunity Employer

Position Summary：

The Key Account Manager (KAM) represents Haosen Group in front of strategic customers located in North America. This role is responsible for new business development, account management, commercial negotiations, program execution, after-sales coordination, and payment follow-up. The KAM also leads internal kickoff, risk identification, site delivery, and customer relationship development. As the primary interface between Haosen and its OEM/Tier 1 clients, the KAM ensures both operational execution and long-term partnership growth.

Key Responsibilities：

1. Customer Representation & Relationship Management：

•Represent Haosen Group in all customer-facing commercial, technical, and service activities.

•Build and maintain strong working relationships with engineering, procurement, and management contacts.

•Maintain and expand both long-term and short-term relationships with key accounts; support securing new projects from existing customers.

2. New Business Development：

•Identify automation opportunities in ICE, EV battery, e-drive, and smart warehousing sectors.

•Promote Haosen’s solutions early in customers' planning processes.

•Collaborate with headquarters and regional teams to prepare quotations and technical proposals.

3. Project Execution & Coordination：

•Organize internal project kickoff meetings; define project charters and implementation strategies.

•Manage overall project schedule, milestones, and deliverables up to pre-acceptance.

•Act as the customer interface during execution, ensuring smooth internal-external communication.

•Lead project team in risk identification, develop mitigation plans, and supervise their execution.

•Organize and manage the site team for equipment delivery, ensuring cost, schedule, and quality targets are met.

•Manage project documentation and ensure information flows seamlessly between internal and external parties.

4. Commercial Management & Negotiation：

•Lead pricing, scope, and change negotiations with professionalism and integrity.

•Draft and review commercial contracts in collaboration with legal and finance teams.

•Develop payment collection strategy and coordinate cross-functional resources to ensure timely fund collection.

5. Customer Satisfaction & After-Sales Support ：

•Monitor customer satisfaction KPIs and lead continuous improvement initiatives.

•Coordinate service, warranty, and on-site support across internal and customer teams.

•Collect feedback and propose service/product optimization actions.

Qualifications：

•Bachelor's degree or above in Engineering, Business, or related fields; junior college acceptable with strong experience.

•3–6 years of work experience in automation or manufacturing industry; familiar with industrial automation equipment preferred.

•Proven experience in account management, sales, or project interface roles.

•Strong communication and coordination skills in multicultural/international environments.

•Proficient in Microsoft Office and project tracking tools.

•Fluent in English; Mandarin Chinese is a plus for coordinating with headquarters.

•Willing and able to travel domestically and internationally as needed.

Position Summary: The Manufacturing Engineer is responsible for optimizing manufacturing processes ensuring product quality and driving continuous improvement initiatives to meet the demands of our customers.

Duties and Responsibilities:

· Analyze current manufacturing processes, identifying areas for improvement, and implement solutions to increase efficiency and reduce costs.

· Develop and implement quality control measures to ensure that components meet Matikon’s quality standards and customer specifications. Provide technical support to production teams, trouble shoot issues and implement corrective actions to minimize downtime and maintain production targets.

· Collaborate with cross-functional teams during the NPI process, ensuring manufacturability, conducting feasibility studies, and optimizing processes for new components.

· Work closely with suppliers to address quality issues, improve delivery performance, and drive supplier development initiatives.

· Lead lean manufacturing initiatives, implement best practices, and drive continuous improvement projects to enhance operational efficiency and productivity.

· Maintain accurate documentation of manufacturing processes, standard operating procedures, and quality records in compliance with regulatory requirements.

· Provide training to productions personnel on new processes, equipment operation, and quality standards, and compliance to currently recognize industry standard QMS and EMS

· Ensure compliance with safety regulations and promote a culture of safety within the manufacturing facility.

This listing of duties is not meant to be an exhaustive record of responsibilities for this position but is meant to assist in the establishment of the function within the company.

Preferred Education and Skills:

· Bachelor’s degree in mechanical engineering, Industrial Engineering, or related field.

· Minimum 3 years of experience in automotive manufacturing.

· Strong knowledge of automotive manufacturing processes.

· Experience with audits, APQP, and PPAP.

· Proficient in CAD software and manufacturing simulation tools.

· Demonstrated problem-solving skills and the ability to analyze complex technical issues.

· Excellent communication and interpersonal skills.

· Familiarity with ERP/MRP systems.

· Leadership abilities.

How Will You Make an Impact?

As a Quality Engineer at our Auburn Hills, MI facility, you will ensure the highest quality standards are upheld throughout the full product lifecycle—from initial design through manufacturing and final delivery. You will develop and maintain quality systems, drive continuous improvement initiatives, resolve product and process issues, and maintain compliance with industry regulations and customer requirements. Your work will directly influence product reliability, customer satisfaction, and operational excellence across the site.

Location:

On-site at our Auburn Hills, MI facility, with occasional travel to suppliers or other Jabil sites as required.

What Will You Do?

• Design, develop, and implement quality control plans, inspection procedures, and testing methods for new and existing products.
• Lead root cause investigations and drive effective corrective and preventive actions (CAPA).
• Partner with suppliers to establish and maintain quality standards, conduct supplier audits, and monitor supplier performance.
• Utilize statistical process control (SPC) tools to monitor processes, identify trends, and recommend improvements to reduce defects.
• Ensure compliance with ISO 9001, AS9100, IATF 16949, customer requirements, and internal quality management systems.
• Maintain accurate and comprehensive quality documentation.
• Drive and support continuous improvement efforts using Lean, Six Sigma, Kaizen, 8D, and other methodologies.
• Act as a primary interface for customer quality inquiries; resolve customer complaints and communicate quality performance updates.
• Provide quality training, guidance, and mentorship to manufacturing teams and cross‐functional groups.
• Compile and analyze quality data; generate reports and present findings to leadership for decision‐making.
• Perform other duties as assigned.

How Will You Get Here?

Education

• Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, or related field) required.

Experience

• 3–5 years of experience in a Quality Engineering role within manufacturing.
• Experience in electronics, medical devices, automotive, or aerospace preferred.
• Equivalent combinations of education and experience may be considered.

Knowledge, Skills & Abilities

• Strong understanding of quality management systems such as ISO 9001, AS9100, and IATF 16949.
• Proficiency with SPC, Minitab, FMEA, control plans, and PPAP processes.
• Demonstrated experience using 8D, 5 Whys, and Fishbone methodologies for problem-solving.
• Excellent written and verbal communication skills across all organizational levels.
• Strong analytical skills, attention to detail, and ability to manage multiple priorities.
• Proficient in Microsoft Office Suite; experience with ERP systems is a plus.

Preferred Qualifications

• ASQ certifications such as CQE, CSSBB, or CMQ/OE.
• Experience with supplier quality management, supplier audits, and quality improvement initiatives.
• Lean or Six Sigma experience.

Director of Marketing & Sales

THE AVALON OF BLOOMFIELD TOWNSHIP

Mission: Hit Maximum Occupancy, Fast.

When you join THE AVALON OF BLOOMFIELD TOWNSHIP, you step into a community built on extraordinary hospitality and life‑changing service — and you take the lead role in driving its growth. Your mission: reach and maintain maximum occupancy by owning every inch of the sales funnel.

This is not a status-quo role.

This is not an entry‑level sales job.

This is a high‑stakes, high‑impact position built for a closer — someone who thrives on urgency, pressure, and results.

Why High‑Performing Closers Choose This Role

• You control strategy + execution — full autonomy in how you build the funnel and close.
• Your performance drives the community’s financial success — immediate and visible impact.
• Aggressive commission + milestone bonuses — the faster you fill the building, the more you earn.

Your High‑Impact Responsibilities

Own Every Stage of the Sales Cycle

• Manage inquiries, cold calls, tours, follow‑ups, and move‑ins — you are the engine behind occupancy.
• Maintain occupancy at or above budgeted levels month after month.

Speed = Your Advantage

• Respond to all inquiries immediately; speed‑to‑lead is your competitive edge.

Build a Referral Power Network

• Rapidly develop relationships with discharge planners, elder law attorneys, financial advisors, physicians, and other top referral sources.

High‑Conversion Event Strategy

• Lead tours, community events, and closing events designed to secure deposits on the spot.

Relentless Funnel Management

• Track inquiries, tours, follow-up, move‑ins, and outreach in CRM; ensure every lead has a “next step.”
• Identify funnel gaps and execute fast, creative solutions to increase conversions.

Who You Need to Be

• A Senior Living Sales Expert
• Minimum 5 years in sales or comparable senior living experience, with verifiable occupancy or sales success.
• A Closer With Emotional Intelligence
• You can navigate family dynamics and confidently drive to “yes.”
• Data‑Driven & CRM‑Obsessed
• You live in Salesforce and use metrics to fix leaks fast.
• Hospitality‑Focused
• You embody the Avalon culture of customer service and resident‑first care.

Compensation & Rewards

• Competitive salary
• Aggressive commission structure tied to speed + volume
• Move‑in bonuses and milestone bonuses at key occupancy targets

This Role Is Built for a Sales Athlete.

If you’re the type of closer who thrives on urgency, competition, and fast results — and you love the impact senior living has on families — you belong at THE AVALON OF BLOOMFIELD TOWNSHIP.

Pay Range: $95,000 - $130,000

Top performers can significantly exceed On Target Earnings through sustained occupancy growth.

EEO Employer

Note – HIL commissioning experience is required

Virtual HIL Commissioning Engineer

Location: Auburn Hills, MI (Onsite)

Rate: $35/hr.w2 (max)

JD:

The Virtual Test Engineer is responsible for delivering a stable and representative test environment to perform automated testing and functional integration of distributed features. This engineer should be capable of working with various Engineering Support teams including systems, wiring, design release engineers, and software teams as required to validate electrical features on the bench and resolve any electrical issues before it gets to production to support successful vehicle launch. Responsibilities include:

• Identify system boundaries and define requirements for simulator I/O, instrumentation, and automation solutions

• Define test scope and instrumentation strategies

• Model, Simulate powertrain features

• Help with commissioning of features related to transmission, engine and other powertrain module

• Collaborates with core engineers, suppliers, feature experts and test engineers to design, implement and troubleshoot instrumentation as required

• Review component level electrical schematics and functional specifications and translate the requirements into hardware and signal requirements for virtual implementation

• Validate and troubleshoots simulator and maintain test benches

• Troubleshoots vehicle systems and test environment functionality to minimize false positive incident reports

What you need for this position:

Basic Qualifications:

• Bachelor of Science in Electrical, Computer Engineering or Computer Science

• Relevant automotive experience

• Knowledge of CAN based communication and diagnostic tools – Vector CANalyzer/CANoe

• Proficient with Modeling

• Good knowledge and understanding of DSpace Tools – config desk, automation desk, control desk etc..

• Proficiency in the understanding of embedded controller networks (CAN, LIN)

Preferred Qualifications:

• Familiarity with development and verification of plant and control models in Matlab/Simulink for execution in hardware in the loop test environments

• Experience with dSpace hardware architecture, design, setup, and troubleshooting

• Bench functional integration, test execution, measuring and instrumentation experience

Job Title: AUTOSAR Embedded Software Engineer

Location: Auburn Hills, MI

Employment Type: Full-Time

Role Overview

We are seeking an experienced AUTOSAR Embedded Software Engineer to join our Base Software (BSWE) team. This role focuses on development and configuration of AUTOSAR Basic Software layers, integration of middleware stacks, and implementation of functional safety concepts within safety-critical Electronic Control Units (ECUs).

The ideal candidate will have strong expertise in Classic AUTOSAR architecture, embedded C/C++ development, and low-level driver development for microcontrollers. This is a key technical role supporting next-generation automotive compute platforms and automated driving technologies.

Key Responsibilities

AUTOSAR Development & Configuration

• Develop and configure Classic AUTOSAR Basic Software modules (OS, COM, MEM, DIAG, etc.)
• Configure MCAL and integrate middleware stacks
• Work with RTE generation and BSW configuration tools
• Ensure compliance with AUTOSAR standards and specifications

Embedded Software Development

• Develop low-level drivers for MCU peripherals
• Implement multi-core architecture solutions
• Design and develop embedded software architectures
• Guide realization through the full development lifecycle (requirements to integration)

Functional Safety & Cybersecurity

• Integrate functional safety concepts (ISO 26262 exposure preferred)
• Support safety-critical software development processes
• Contribute to secure software design practices

Debugging & Integration

• Perform software integration and validation on target hardware
• Use compilers, emulators, debuggers, and other development tools
• Analyze and resolve complex software and system-level issues

Collaboration

• Actively contribute within cross-functional teams
• Communicate effectively with systems, hardware, and validation teams
• Participate in technical reviews and design discussions

Required Qualifications

• Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or related field
• 5+ years of embedded software development experience using C and/or C++
• Strong knowledge of Classic AUTOSAR architecture and concepts
• Hands-on experience with AUTOSAR stack modules (OS, COM, MEM, DIAG, etc.)
• Experience configuring AUTOSAR Basic Software
• Experience developing low-level MCU drivers
• Strong understanding of microcontrollers and multi-core architectures
• Knowledge of functional safety and cybersecurity concepts
• Experience with compilers, debuggers, and embedded development tools
• Strong analytical and debugging skills
• Excellent communication skills and team collaboration
• Passion for problem-solving and eagerness to learn

Preferred Qualifications

• Master’s degree in Computer Science, Computer Engineering, Electrical Engineering, or related field
• 7+ years of embedded software development experience (Expert Level)
• Experience working on safety-critical automotive ECUs
• Exposure to automated driving compute platforms

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

The Junior Electrical Engineer will support the integration and coordination of vehicle electrical architecture, system specifications, documentation releases, and change management activities. The role involves assisting in requirements analysis, vehicle configuration (PROXI), and supporting early-stage vehicle builds at the assembly plant.

This position works closely with cross-functional teams to help ensure timely delivery of program milestones and electrical system integration activities.

Key Responsibilities

Responsibilities include, but are not limited to:

• Support cross-functional coordination to help meet program deliverables and timelines
• Review program timing, product plans, series cards, and bulletins; communicate updates to relevant teams
• Assist in reviewing investigation bulletins and collaborate with the EE team to provide technical feedback
• Support management of electrical deliverables within the vehicle program
• Participate in Post-2A risk mitigation meetings
• Support RAR (Red-Amber-Red) process activities
• Assist in creating and managing Project Specification Releases (Source Package, 1A, 2A, etc.)
• Help manage Post-2A change request (CR) lists for PWB integration loops
• Process and track specification change requests (CRs) in DOORS and other change management systems
• Support PROXI/Vehicle Configuration updates
• Assist during initial development vehicle builds at assembly plants
• Participate in electrical issue resolution meetings and program reviews

Basic Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related field
• 1–3 years of automotive electrical engineering experience (or strong internship/co-op experience)
• Basic understanding of vehicle electrical systems and architecture
• Strong communication and presentation skills
• Ability to organize and document technical information clearly

Preferred Qualifications

• Master’s degree in Electrical or Mechanical Engineering (nice to have)
• Exposure to component releasing, validation, or system/vehicle testing
• Familiarity with assembly plant electrical test systems
• Understanding of change management processes
• Ability to work independently with guidance from senior engineers
• Comfortable interfacing with manufacturing/assembly plant teams

ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual’s age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

JOB SUMMARY:

As Associate General Counsel, you will be a key member of our legal department, reporting directly to the Chief Legal Officer. This strategic position serves as a critical business partner to several functional teams while providing comprehensive legal support across the organization.

DUTIES AND RESPONSIBILITIES:

• Draft, review, and negotiate complex commercial contracts including supply agreements, service agreements, and technology licensing arrangements
• Provide legal guidance on supply chain management, procurement processes, and vendor relationships to ensure compliance and minimize risk exposure
• Monitor and ensure compliance with federal, state, and international automotive regulations, including safety standards and trade regulations
• Perform legal research on emerging automotive industry regulations and provide strategic advice to business units on potential impacts
• Conduct risk assessments for new business initiatives, product launches, and operational changes, developing mitigation strategies as needed
• Collaborate with cross-functional teams including engineering, operations, procurement, and sales to address legal considerations in business operations and provide training
• Assist with data privacy matters including policy development, compliance with laws, and management of related issues
• Support corporate governance matters including corporate records maintenance, and subsidiary management
• Participate in dispute resolution and manage outside counsel relationships when litigation arises

EDUCATION AND EXPERIENCE:

• JD from an accredited law school with strong academic credentials
• Active license to practice law, Michigan license preferred
• Minimum 6 years of legal experience in automotive or other manufacturing supply chain (either law firm or in house position)
• Demonstrated expertise in drafting and negotiating complex commercial agreements
• Strong knowledge of regulatory frameworks affecting automotive and manufacturing industries
• Excellent analytical, communication, and negotiation skills
• Fluency in English
• Ability to translate complex legal concepts into practical business advice
• Ability to balance a workload of urgent requests, while communicating proactively and remaining responsive

KNOWLEDGE, SKILLS, AND ABILITIES:

• Experience with product liability matters and recall procedures
• Experience with international automotive and manufacturing regulations and emerging market regulations
• A process improvement mindset with data driven recommendations
• Demonstrated track record of providing positive customer experiences
• Able to travel occasionally

*At the end of 2025, DMS acquired Android Industries and Avancez, and the combined organization is now called Voltava. You may still see references to DMS, Android, or Voltava in different places, but they’re all part of the same company as we work through the transition. We appreciate everyone’s patience while the integration is underway.*

Akkodis is seeking a Design Release Engineer for a Contract 12+ Months job with a client in Auburn Hills, MI.

Rate Range: $40/hour to $42/hour; on W2. The rate may be negotiable based on experience, education, geographic location, and other factors.

Design Release Engineer

Interface with cross functional team to design and develop functional solutions that achieve design requirements & to ensure proper design interfaces with other components, and all requirements are met.

Work with other functions Design / Releasing teams to ensure consistency in requirements, standards, and practices across programs.

Translate Functional Objectives into technical requirements and solutions

Create and analyze alternative design concepts

Integrating system components

Support Benchmarking of competitive vehicles.

Desired Qualifications:

Bachelor of Science degree in Electrical Engineering, Mechanical Engineering, Computer Engineering, and or MBA from an ABET accredited university (or equivalent).

Experience developing Performance Standards, Creating master sections and Surface feasibility proposal for PDO.

NX and Teamcenter knowledge.

Automotive Interior Product Design components/systems.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at (61 or ().

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

• · San Francisco Fair Chance Ordinance