Engineering Jobs in Unionville Connecticut

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI629cfb2ee342-26289-39815000

The HRIS Manager is responsible for the strategic ownership, administration, and evolution of the organization's Human Capital Management (HCM) systems. This role plays a critical part in supporting a fast-growing, acquisition-driven company by ensuring HR systems scale efficiently, integrate seamlessly, and deliver reliable data to support workforce decisions.

The ideal candidate brings deep experience in high-growth environments, M&A integrations, and enterprise HCM implementations, with the ability to balance hands-on system execution with long-term HR technology strategy.

HRIS Strategy & System Ownership

• 
  
• Serve as the owner and subject matter expert for the organization's HCM ecosystem (HRIS, payroll, time & attendance, benefits, talent modules, integrations).
  
• Partner with HR, Finance, IT, and external vendors to ensure system stability, data integrity, and optimal user experience.
  
• Act as a trusted advisor to HR leadership on HR technology capabilities and limitations.
  
• Translate business needs into system solutions and clearly communicate technical concepts to non-technical stakeholders.
  

Implementation & Optimization

• 
  
• Lead end-to-end HCM implementations, upgrades, and module expansions, including requirements gathering, configuration, testing, deployment, and post-go-live stabilization.
  
• Manage implementation partners and vendors, ensuring projects are delivered on time, on budget, and in alignment with business requirements.
  
• Continuously evaluate system functionality and recommend enhancements to improve automation, efficiency, and reporting.
  

Mergers & Acquisitions Support

• 
  
• Support HR Leadership with HRIS due diligence for acquisitions, including system assessments, data mapping, and integration planning.
  
• Execute HRIS integrations for acquired entities, including data conversion, process alignment, and change management.
  
• Support rapid onboarding of newly acquired workforces while maintaining compliance and data accuracy.
  

Data, Reporting & Compliance

• 
  
• Ensure HR data accuracy, governance, and security across all systems.
  
• Establish routine/automated reporting to meet business needs and support ad-hoc reporting as needed.
  
• Support compliance with federal, state, local, and international employment and payroll regulations as applicable.
  

Business Intelligence & Reporting

• 
  
• Advanced experience in BI report writing and dashboard development to support HR, Finance, and executive leadership.
  
• Ability to translate workforce and compensation data into actionable insights using HCM reporting tools and/or external BI platforms (e.g., Power BI, Tableau).
  
• Strong understanding of data structures, data validation, and audit controls to ensure accuracy and consistency across reports.
  
• Experience delivering recurring operational reports as well as ad hoc analytics for headcount, labor cost, benefits, and workforce planning.
  

Systems Integrations & Data Architecture

• 
  
• Hands-on experience designing, implementing, and maintaining integrations between HCM systems and enterprise platforms, including ERPs, payroll engines, benefits vendors, and third-party applications.
  
• Strong understanding of how ERPs (e.g., financials, GL, cost centers, project accounting) interact with HCM systems to support payroll, labor costing, and financial reporting.
  
• Experience partnering with Finance and IT to align HR data flows with accounting structures, chart of accounts, and reporting requirements.
  
• Knowledge of integration methods such as APIs, file feeds, middleware, and scheduled data exchanges.
  
• Ability to troubleshoot data discrepancies across systems and lead root-cause analysis between HCM, ERP, and downstream applications.
  

• 
  
• Bachelor's degree in Human Resources, Information Systems, Business, or a related field (or equivalent experience).
  
• 7+ years of progressive HRIS experience, including system ownership and configuration.
  
• Proven experience supporting high-growth organizations and scaling HR systems.
  
• Hands-on experience with HCM implementations (full lifecycle).
  
• Direct experience supporting M&A activity, including HRIS integrations and data migrations.
  
• Strong understanding of HR, payroll, timekeeping, and benefits processes.
  
• Exceptional project management, analytical, and problem-solving skills.
  
• Experience with mid-market or enterprise HCM platforms (e.g., UKG, Paycor)
  

This position is currently accepting applications.

Apply Now

Job ID: 520735

Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

• Oldcastle Infrastructure is looking for an experienced Sales Representative to join our team.
• The Sales Representative reports to the Sales Manager and is responsible for developing and maintaining favorable relationships with current and potential customers, achieving sales goals of our precast concrete products business and developing plans to increase the region’s sales volume. This position covers the Connecticut territory.

Job Location

• This position will remote with some travel to our Avon, CT facility.

Job Responsibilities

• Sales and marketing of all Oldcastle Infrastructure precast concrete products, including utility vaults, concrete pipe, culverts, manholes, catch basins and other drainage products. Customers include civil contractors, utility companies and municipalities.
• Prospect opportunities and companies and market products within core markets.
• Identify and bid all appropriate projects within assigned marketing area. Participate in the development of bid strategy for each job.
• Utilize various software tools to manage prospects, issue quotes and communicate with a broader team.
• Assist the Area Sales Manager in developing strategy and tactics that ensure the attainment of company sales goals and profitability in key markets through assigned geography.
• Develop and maintain relationships within the engineering community. Leverage these relationships to get Oldcastle products specified on future projects.
• Will be responsible for meeting specific sales volumes and profit margin goals.
• Partner with other departments (Quality Control, Production, Operations, Transportation, and Accounting) to ensure every account receives the highest level of customer service.
• Communicate with the broader Oldcastle sales team to manage and coordinate sales to customers who overlap geographic boundaries and markets, as well as to leverage the Oldcastle product portfolio across company boundaries.
• Actively participate in industry-related associations as required in order to develop and maintain key networking and business relationships.

Job Requirements

• Bachelor’s degree or equivalent combination of education and experience.
• 2+ years in civil infrastructure construction, precast concrete manufacturing sales, or similar product sales.
• Demonstrate strong business acumen in regard to sales and marketing and/or the civil infrastructure construction market; be knowledgeable in regard to current and possible future industry trends.
• Ability to read and interpret civil design drawings, and engineering production drawings.
• Must have ability to travel (approx. 50% +) throughout the sales region.
• Must have the drive and self-discipline to work independently within territory to accomplish goals.
• Demonstrate the ability to establish and maintain effective relationships with customers – both internal and external.
• Be a pro-active, self-motivated, self-starter who is action oriented and drives for results.
• Be experienced with technical sales to engineers and specifying agencies (Not necessity but a plus).
• Be proficient in basic Microsoft Office software (Word, Excel, Outlook and PowerPoint).
• Have a Valid Driver’s License and acceptable driving record; monthly auto reimbursement for mileage is provided.
• Have ability to work with a diverse group of people both within the company and in a sales capacity.

Compensation

• Base salary range of $110,000-120,000 per year
• Bonus opportunity 25%+
• Vehicle reimbursement program
• 401(k) plan / group retirement savings program
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

ROTHA Contracting Company, Inc. is seeking a Quality Control Manager/Construction Inspector to support roadway, bridge, and heavy civil construction projects for State and public agencies. The Quality Control Manager is responsible for developing, implementing, and maintaining project-specific Quality Control Programs to ensure construction activities are executed in accordance with contract documents, DOT specifications, permits, and regulatory requirements.

Key Responsibilities

• Develop, implement, and maintain a project-specific Quality Control (QC) Program
• Conduct and oversee field inspections from an onsite field office to verify work complies with plans, specifications, and contract documents
• Monitor materials testing and ensure proper Quality Assurance / Quality Control documentation
• Identify and document field conditions that may impact quality, schedule, or compliance
• Ensure work meets DOT, environmental, permit, and company quality standards
• Perform periodic reviews of QC processes to verify adherence to project and company standards
• Provide guidance and direction to project teams and field staff regarding quality control requirements and procedures
• Support continuous improvement of quality control practices within assigned projects through process refinement.
• Prepare and submit daily and monthly Quality Control reports
• Maintain accurate QC records including inspections, testing, certifications, and non-conformance reports
• Track corrective actions and preventive measures
• Organize and maintain QC documentation for audits and project closeout
• Coordinate with Project Managers, Superintendents, and engineers to resolve quality issues; coordinate with certified testing laboratories and additional QC personnel as required
• Support project teams with interpretation of quality-related contract requirements and inspection criteria

Required Qualifications

• Bachelor’s degree in Civil Engineering or Construction Management, or related field preferred. Relevant work experience in heavy civil/infrastructure construction will be considered
• Minimum 8 years of experience in a combination of: field inspection, heavy civil construction or construction management, and/or quality control or quality assurance roles
• Prior experience on DOT or public infrastructure projects
• Strong ability to read and interpret construction drawings, specifications, and contract documents

Physical Requirements

• Ability to work in an active outdoor construction environment in various weather conditions
• Ability to walk construction sites regularly and access all areas of active construction

Certifications / Licenses

NETTCP Quality Assurance Technologist certification preferred; willingness to obtain NETTCP certification if not currently held

Compensation

Based on experience and qualifications

Benefits Package

Health Insurance

401(k) eligibility with 6% company match

Company issued mobile device.

Paid time off and paid holidays

Annual bonus opportunities

Overtime opportunities

Location: Bristol, CT (Onsite Monday–Thursday, Remote Friday)

Duration: Contract through 4/2/2027

Pay Rate: $50–$60/hr

Job Description

This position is responsible for the creation, development, and deployment of designs, animations, and real-time graphics directories at an expert level. The Senior Real-Time Graphics Developer manages directory maintenance and new graphic builds independently or while leading a team. The role requires strong collaboration with teammates, partners, and stakeholders to set expectations and ensure on-time delivery.

This individual will develop system-wide workflows and processes while proactively providing technical support. The role also assists with training and onboarding programs. This is a creative position that requires the ability to innovate, learn quickly, and collaborate with others under varying deadlines while maintaining high-quality broadcast graphics for live productions.

Responsibilities

• Utilize Vizrt for the creation, development, and deployment of graphics for live productions
• Plan, build, maintain, and update complex graphic directories independently or while leading a team
• Provide leadership, direction, troubleshooting, and support for event and studio graphics directories
• Use graphics software such as Adobe Photoshop, Adobe After Effects, Adobe Illustrator, and Cinema4D to support design and animation creation
• Work with internal systems and proprietary workflows used for live broadcast production
• Collaborate with stakeholders and leadership to manage project deliverables and timelines
• Research and resolve technical questions related to design, animation techniques, and production systems
• Develop system-wide workflows, scripts, and processes to improve efficiency and innovation
• Mentor team members and assist with onboarding and training programs
• Translate creative direction into custom graphics, animations, and layout solutions
• Support live production environments, including troubleshooting during broadcasts
• Maintain proper file management and archiving procedures
• Ensure high standards of accuracy, efficiency, creativity, and timely delivery

Basic Qualifications

• At least 8 years of experience designing graphics for a live production environment at a major studio, network, or production company
• Expert-level experience with a real-time graphics platform
• Strong animation and design skills with excellent typography and layout abilities
• Deep understanding of broadcast and television production technology
• Ability to work in fast-paced live production environments with tight deadlines
• Excellent communication and collaboration skills
• Experience mentoring or guiding team members
• Strong attention to detail, including spelling and grammar
• Ability to work flexible hours and occasionally support live production environments
• Portfolio or demo reel showcasing relevant work

Preferred Qualifications

• 10+ years of experience with live broadcast sports graphics and production workflows
• Strong experience with Vizrt and Trio software
• Experience with real-time graphics playout in live production environments
• Knowledge of 3D graphics, modeling, and animation tools such as Cinema4D, Maya, or Unreal Engine
• Experience writing or troubleshooting scripts using languages such as C#, JavaScript, C++, or other programming languages
• Interest or knowledge of sports and sports culture

Education

• Bachelor’s degree or equivalent experience

Senior Real-Time Graphics Developer:

Bristol, CT (Hybrid – Onsite Monday–Thursday, Remote Friday)

Optomi, in partnership with a leading broadcast media organization, is seeking a Senior Real-Time Graphics Developer to support live production graphics and animation initiatives. This individual will be responsible for designing, developing, and deploying high-quality real-time graphics for live broadcast environments, working closely with production teams and technical partners to ensure seamless on-air execution.

This role offers the opportunity to contribute to high-profile live productions, drive innovation in real-time graphics systems, and collaborate with a highly creative and technical team.

What Type of Experience the Right Candidate Has:

• 8+ years of experience designing graphics for live broadcast or production environments
• Expert-level experience working with real-time broadcast graphics platforms (Vizrt preferred)
• Strong understanding of broadcast production technology and control room workflows
• Proven ability to create high-quality animation, typography, and graphics packages
• Experience building and maintaining graphics directories, templates, and production workflows
• Ability to mentor teammates and collaborate effectively with technical and creative stakeholders
• Portfolio or demo reel showcasing broadcast graphics and animation work

Responsibilities of the Right Candidate:

• Design, develop, and deploy real-time graphics and animation packages for live production environments
• Build, maintain, and update graphics directories and templates
• Collaborate with production and engineering teams to ensure graphics systems perform seamlessly during broadcasts
• Develop and improve graphics workflows, tools, and automation processes
• Troubleshoot graphics systems and provide technical support during live productions
• Translate creative direction and production needs into effective visual graphics solutions
• Mentor and support teammates in graphics development and workflow optimization

What the Right Candidate Will Enjoy:

• Working in a fast-paced, creative broadcast production environment
• Designing and deploying cutting-edge real-time graphics for live programming
• Collaborating with cross-functional teams including production, engineering, and creative teams
• Contributing to the development of workflows, graphics systems, and animation packages
• A hybrid schedule with remote Fridays