Engineering Jobs in San Pedro California

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Job Title: Senior Facility Planning & Capital Asset Analyst

Pay: Competitive Market Rate

Job Type: long term consultant (W2 contract w/ benefits)

Location: Onsite - Long Beach, CA

The CSI Companies are seeking a Senior Facility Planning & Capital Asset Analyst to support long-term capital planning, facility space management, and infrastructure improvements for a large healthcare campus. This role will collaborate with hospital services, leadership teams, and planning groups to evaluate facility needs, analyze data, and develop strategic plans that guide capital improvements and operational efficiency over the next 10 years.

The ideal candidate will have strong data analysis, project planning, and reporting skills, along with experience supporting facility planning, capital asset management, or healthcare infrastructure projects.

Key Responsibilities

• Attend weekly Capital Asset Management (CAM) meetings and collaborate with hospital service working groups to support facility planning initiatives.
• Conduct research using internal databases and planning systems to analyze space utilization, patient projections, and facility capacity needs.
• Develop formal reports and analytical summaries assessing the current state of hospital space, infrastructure, and operational support.
• Translate facility and space requirements into multi-year project plans, outlining capital projects and improvements needed over a 10-year planning horizon.
• Review existing Master Facility Plans and identify areas requiring updates based on operational changes or infrastructure assessments.
• Provide timely responses to requests for information (RFIs), calls, and email inquiries related to facility planning and capital projects.
• Assist with space management surveys and site assessments to document the function, ownership, and use of spaces across the campus.
• Support the planning and coordination of space relocations and departmental moves associated with renovations, construction, or operational needs.
• Develop visualization materials, briefs, and presentations for leadership, stakeholders, and external audiences.
• Participate in planning sessions to scope future infrastructure projects and identify areas requiring specialized technical expertise.
• Ensure planning recommendations align with federal regulations, facility standards, and compliance requirements.
• Assist in developing architectural and engineering planning documentation for campus facilities, including utilities and infrastructure systems.
• Contribute to pre-SCIP design planning efforts, including project impact assessments, space gap analysis, and infrastructure evaluations.
• Support the development of movement mitigation strategies to minimize disruptions to medical center operations during construction or renovation projects.
• Assist with cost estimation and budget forecasting for planned capital projects based on pre-design investigations and planning results.
• Participate in Facility Master Planning coordination meetings, providing analysis and recommendations for future capital investments.
• Identify, evaluate, and recommend solutions for complex infrastructure and facility planning challenges affecting campus operations.
• Support planning for improvements including building renovations, interior upgrades, utility systems, water distribution, drainage systems, roads, and campus infrastructure.

Qualifications & Experience

• Bachelor’s degree required (Architecture, Engineering, Data Analytics, Healthcare Administration, Urban Planning, or related field preferred).
• 2+ years of experience in data analytics, facility planning, healthcare planning, or related analytical roles.
• 1+ year of project planning or project management experience supporting infrastructure or facility initiatives.
• Knowledge of data analysis tools and methodologies, including data mining, database management, statistical analysis, and reporting.
• Experience working with data tools such as SQL, R, SAS, or similar analytical platforms is preferred.
• Familiarity with healthcare facility operations and Patient-Centered Care culture is highly desirable.
• Experience supporting master planning or strategic planning efforts within healthcare or commercial environments.
• Proficiency with Microsoft Office Suite (Excel, PowerPoint, Word, Outlook) required.
• Exposure to AutoCAD, Revit, or Microsoft Project is a plus.

About CSI Companies

CSI Companies is a national workforce solutions firm that delivers strategic staffing and consulting services across technology, healthcare, financial services, and professional services industries. We partner with leading organizations, including global consulting firms, to connect top talent with impactful career opportunities.

Benefits Offered:

• Weekly pay
• Medical, dental, and vision coverage
• Voluntary Life and AD&D coverage
• Paid Training
• Opportunity for advancement upon performance and availability

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity for a Lighting Design Project Coordinator.

• Pay range is $55,000 to $80,000 annually (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

The Project Coordinator will collaborate closely with our design team, dealers, and representatives to intake new projects, conduct scope calls to establish project parameters, and work alongside account managers to facilitate invoices. They must possess the capability to read and understand construction sets to evaluate if all essential information for initiating the project has been received. Additionally, they will monitor project status, maintain project log and coordinate with multiple disciplines to acquire the necessary documentation.

Primary Job Responsibilities:

· Initial project intake and processing

· Effectively review documentation and assess missing information needed for design services

· Communicate with clients, designers and sales teams on additional information needed to complete projects in a timely manner

· Communicate with clients on project deadlines and give updates on progress

· Update and maintain team calendar and project coordination board

· Would conduct initial calls to clarify project scope, services required, product needs and client specific direction.

· Produce clear documentation that summarizes initial call information to communicate to design team for successful deliverables that satisfies clients requirements

· Collaborate with account managers to provide quotations

· Display a commitment to quality by following required procedures and practices; take all appropriate measures to ensure quality

· Work with assigned outside sales managers to track the status of projects in the pipeline and to maintain customer satisfaction with project deliverables and processes.

· Identify and assess customers’ needs to achieve satisfaction

· Self-motivated individual with ability to complete tasks in a timely manner

Primary Job Requirements:

· 3-5 years of project management or experience in related fields such as interior design, architecture, or lighting design.

· Demonstrated knowledge of design sets (plans, elevations, sections etc.)

· Successful history of written and verbal customer communication skills

· Demonstrated proficiency in administrative and documentation procedures

· Proficient with Microsoft Office Suite of products (Outlook, Word, Excel, PowerPoint)

· Proficient with AutoCAD not required but would be a plus

· Must have the ability to manage multiple and shifting priorities in a fast-paced and constantly changing environment

· Must have a high degree of initiative and the ability to manage multiple tasks, work under pressure, and meet deadlines as required

Educational Requirements: High School Diploma. Bachelor’s degree in interior design, Architecture or Architectural Engineering

Program Proficiencies: Microsoft suite, Bluebeam Revu, AutoCAD (a plus), Outlook

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

DMF is looking for a recent Electrical Engineering graduate with a passion for electronics and circuit design to join our new product development team. In this role you will work on developing industry leading LED lighting and IOT products with exposure to everything from ideation to detailed circuit design, analysis, prototyping and validation. The candidate will be an integral part of a dynamic and growing engineering team with room to innovate, learn and grow rapidly.

This role is onsite in Carson, CA.

The salary range is $75,000 to $100,000 (based on skills/knowledge/experience).

Responsibilities:

• Support the Electrical Engineering team in the design and qualification of compact LED drivers incorporating switch mode power supplies and associated control and communication circuits.
• Execute hardware testing and report results for review.
• Perform detail circuit design, simulation and prototyping under the direction of a senior engineer.
• Troubleshoot field returns, identifying root cause of problem and potential design improvements.
• Work with a cross functional team consisting of Mechanical engineers, Firmware engineers, Industrial Designers, and Project Managers supporting the overall product development effort.
• Follow the company product development process, conduct design reviews and interface with other engineers and departments to ensure an efficient transfer from design to production.

Requirements:

• Passionate about solving problems, using technology, and building product.
• Ideally, 2 or more years of professional experience with exposure to circuit design or testing within the consumer or industrial electronics sector.
• Knowledgeable with the fundamentals of electronics, components, and circuit design
• Hands on experience with electronics through professional experience, personal projects or college assignments.
• Able to communicate in an effective and professional manner (written and oral).
• High level of maturity and organization with a healthy obsession to learn
• Experience with microcontrollers and firmware is a plus.

Responsibilities.

• 
  
• Read and interpret basic engineering drawings for mechanical components and cable assemblies to verify compliance with specifications.
  
• Perform receiving inspection and/or product-level inspection to determine material conformance.
  
• Use basic measuring tools (calipers, micrometers, gauges, microscopes, etc.) to verify dimensional and visual requirements.
  
• Perform inspection of electronic assemblies and cable assemblies for workmanship and labeling accuracy.
  
• Identify and document nonconforming material.
  
• Process nonconformance records in QT9, including data entry and supporting documentation.
  
• Maintain accurate inspection records and ensure proper material status identification.
  
• Communicate inspection findings to QC Manager and internal departments as required.
  
• Assist with sorting, rework verification, and containment activities when needed.
  
• Support organization and maintenance of inspection areas and documentation.
  
• Other duties as assigned.
  

• 
  
• High School Diploma or GED required.
  
• Minimum 2 years of quality inspection experience in a manufacturing or production environment preferred.
  
• Basic understanding of electronic or electro-mechanical assemblies is a plus.
  
• Experience working within a documented quality system (ISO 9001 preferred).
  
• Familiarity with inspection tools and measuring equipment.
  
• Experience entering data into ERP or quality management systems is a plus.
  

• 
  
• Strong attention to detail and disciplined inspection habits.
  
• Ability to follow written procedures and work instructions accurately.
  
• Comfortable inspecting small components and assemblies under magnification.
  
• Ability to stand, sit, and move between inspection stations for extended periods.
  
• Basic computer skills and proficiency in Microsoft Office.
  
• Clear verbal communication skills.
  
• Ability to write concise and legible inspection notes.
  
• Reliable attendance and punctuality.
  
• Willingness to ask questions when requirements are unclear.
  
• Ability to work independently once trained.
  

• 
  
• Medical, vision and dental insurance
  
• 401(k) with company match (100% of the first 4% in eligible compensation)
  
• Flexible Spending Account
  
• 2 weeks paid vacation
  
• 1 Week sick pay
  
• 10 company holidays
  
• Group life insurance
  

• Hourly: $26 - $34

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System, Office XP, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System, Office XP., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) "5S". Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We have an on-site opportunity for an experienced Senior Embedded Software Engineer to work onsite in El Segundo, CA.

• Raytheon El Segundo, CA Location

What You Will Do:

• Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.
• Uses and provides creative solutions to complex technical system and software integration problems.
• Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.
• This position may require occasional business-related travel.

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) AND a minimum of 5 years of prior relevant experience.
• Experience in C++ design paradigms experience on Linux, VxWorks, or other Real Time Operating Systems.
• Experience in developing, testing, and integrating real-time software applications written in C++.
• Experience in computer scripting languages such as Shell/Perl/Python.
• Active and transferable U.S. Government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Additional experience in coding using C, C#, Java or closely related software languages.
• Experience working in lab environments with physical hardware (e.g., test benches, simulators).
• Ability to quickly understand and navigate complex systems and established code bases.
• Experience with product development utilizing the Scrum techniques of the Agile software development process.
• Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.
• Hands-on experience with Git for version control and GitLab for repository management.
• Ability to manage multiple priorities.
• Experienced in developing in CUDA to accelerate compute-intensive workloads on Nvidia GPUs.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Relocation Eligible – Relocation assistance available
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Wire Harness Design Engineer

Location: Long Beach California and Centennial, Colorado

Rate: $40/hour to $75/hour; The salary may be negotiable based on experience, education, geographic location, and other factors.

Contract to Hire

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering experience.
• 2+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). All applicants must be United States citizens, lawful permanent residents of the United States, persons granted refugee or asylee status in the United States and any other status within the meaning of US Export Control laws. If you meet these requirements, we are happy to continue discussing this opportunity with you. If you do not meet these requirements, we will be glad to look for a different opportunity that does not contain this requirement

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

We are hiring a Senior Sales Specialist at Vulcan Metal Group.

This is not a commodity metals role.

We sell exotic alloys + precision machined components into aerospace, defense, medical, semiconductor, and space. About 60% of our business is machined parts, so you’re selling high-value solutions—not just quoting material.

If you’re used to competing on price, this won’t be a fit.

If you know how to:

• Open doors
• Sell into engineering-driven environments
• Navigate long sales cycles
• And close…

There’s real upside here.

What you get:

• Uncapped commission (margin-based)
• Draw during ramp
• High-margin product mix
• Ability to build and own your book

This is a performance role—top reps can earn $150K–$300K+.

Not for order takers. Not for coasters.

If you want to win bigger deals and get paid for it, message me.

Akkodis is seeking Electrical Engineer II, Harness in Long Beach, CA or Centennial, CO

Position: Electrical Engineer II, Harness

Location : Long Beach, CA or Centennial, CO

Duration : 6 month contract to Hire/C2H

Pay Range: $40/hr. -$74/hr. (The pay range may be negotiable based on experience, education, geographic location, and other factors)

Job Description:

Summary:

• Design and route aerospace-grade wire harnesses in SolidWorks (transitioning to Siemens NX); integrate in constrained environments; ensure compliance with space/aero environmental constraints; collaborate closely with build and test.

Key Responsibilities:

• 3D routing and 2D documentation (drawings, wiring tables, BOMs, callouts).
• Apply separation, shielding, grounding, and EMI/EMC best practices for digital/RF.
• Select materials/components mindful of outgassing/TML/CVCM, thermal, vibration, and vacuum constraints.
• Coordinate with ME, EE, Systems, and Manufacturing to ensure serviceability and buildability.
• Manage CAD libraries and participate in design reviews.

Requirements:

• 2+ to 7+ years harness design in aerospace/aircraft (satellite/rocket a plus).
• SolidWorks proficiency; NX experience or openness to transition.
• Demonstrated constrained routing in compact volumes.
• Familiar with IPC/WHMA-A-620, AS9100 environments, and aerospace-grade connector families.

Education:

• Bachelor’s preferred; Associate’s with strong relevant experience.

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Thanks & Regards

Nandakini

Recruiter

M

World Leader in IT and Engineering Workforce Solutions

(An Adecco Group Company)

2200 Renaissance Blvd, Suite 230

King of Prussia, PA 19406

is a commercial brand under which both AKKA & Modis entities operate.

This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other contractual or confidentiality protection. If you are not a designated recipient, you may not review, copy or distribute this message. If you receive this message in error, please notify the sender by reply email and delete this message.

Akkodis, part of The Adecco Group North America located at 4800 Deerwood Campus Parkway, Building 800, Jacksonville, FL 32246, is committed to data privacy compliance. To learn more about how we collect and process personal information, please read our General Privacy Policy located on the website above.