Engineering Jobs in Plymouth, CT

• 
  
• Assembles complex Controls and Control Cabinets as well as assembly on various product lines and other equipment
  
• Assembles components and sub-assemblies; components, such as heater coils, require multiple manufacturing type operations, like cutting wire, winding, soldering and annealing the coil and checking resistance between operations to ensure its within tolerance.
  
• Follow Standard Operating Procedures (SOPs) to build sub-assemblies and assemblies.
  
• Be responsible for visual inspections of material before and after assembly including all mechanical functions work and that there is room for replacing parts, electrically wire runs may be checked by use of multi-meter or other device.
  
• Use various fixtures, gauges, hand tools and power tools to assemble, adjust, or repair product.
  
• Report faulty operation, defective material, and unusual conditions to the leadership team.
  
• Cross train on all assembly product lines as directed by the management team.
  
• Observe good housekeeping and safety procedures and keep equipment, tools and work area clean and orderly.
  
• Perform other related duties as assigned.
  

• 
  
• High school diploma, GED, or equivalent qualification from an accredited school.
  
• 1-2 years of previous manufacturing experience, preferably in assembly work.
  

• 
  
• Must be able to work in the United States without corporate sponsorship now and in the future.
  
• US Citizen Required.
  

• 
  
• Previous experience with standard operating procedures
  
• Previous experience with product electrical assembly, maintenance and/or repair
  
• Basic working knowledge and experience with computers
  

• 
  
• Ability to read and interpret work orders and production documentation.
  
• Proficient blue printing reading and comprehension.
  
• Basic computer proficiency, including Microsoft Office Suite.
  
• Strong organizational and time-management skills.
  
• Ability to work independently and in a team environment.
  
• Strong attention to detail and accuracy.
  
• Must be able to work in a manufacturing floor setting and required to follow the PPE requirements.
  
• Ability to communicate with managers, engineering, and quality regarding production and issues.
  
• Ability to lift, push, and pull up to 50 lbs.
  
• Ability to stand for extended periods of time. Repetitive motion including but not limited to lifting, bending, and squatting is inherent to this position
  

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

Physical Requirements:

PI12f15f9a85f4-26289-39677162

Location: Bristol, CT (Onsite Monday–Thursday, Remote Friday)

Duration: Contract through 4/2/2027

Pay Rate: $50–$60/hr

Job Description

This position is responsible for the creation, development, and deployment of designs, animations, and real-time graphics directories at an expert level. The Senior Real-Time Graphics Developer manages directory maintenance and new graphic builds independently or while leading a team. The role requires strong collaboration with teammates, partners, and stakeholders to set expectations and ensure on-time delivery.

This individual will develop system-wide workflows and processes while proactively providing technical support. The role also assists with training and onboarding programs. This is a creative position that requires the ability to innovate, learn quickly, and collaborate with others under varying deadlines while maintaining high-quality broadcast graphics for live productions.

Responsibilities

• Utilize Vizrt for the creation, development, and deployment of graphics for live productions
• Plan, build, maintain, and update complex graphic directories independently or while leading a team
• Provide leadership, direction, troubleshooting, and support for event and studio graphics directories
• Use graphics software such as Adobe Photoshop, Adobe After Effects, Adobe Illustrator, and Cinema4D to support design and animation creation
• Work with internal systems and proprietary workflows used for live broadcast production
• Collaborate with stakeholders and leadership to manage project deliverables and timelines
• Research and resolve technical questions related to design, animation techniques, and production systems
• Develop system-wide workflows, scripts, and processes to improve efficiency and innovation
• Mentor team members and assist with onboarding and training programs
• Translate creative direction into custom graphics, animations, and layout solutions
• Support live production environments, including troubleshooting during broadcasts
• Maintain proper file management and archiving procedures
• Ensure high standards of accuracy, efficiency, creativity, and timely delivery

Basic Qualifications

• At least 8 years of experience designing graphics for a live production environment at a major studio, network, or production company
• Expert-level experience with a real-time graphics platform
• Strong animation and design skills with excellent typography and layout abilities
• Deep understanding of broadcast and television production technology
• Ability to work in fast-paced live production environments with tight deadlines
• Excellent communication and collaboration skills
• Experience mentoring or guiding team members
• Strong attention to detail, including spelling and grammar
• Ability to work flexible hours and occasionally support live production environments
• Portfolio or demo reel showcasing relevant work

Preferred Qualifications

• 10+ years of experience with live broadcast sports graphics and production workflows
• Strong experience with Vizrt and Trio software
• Experience with real-time graphics playout in live production environments
• Knowledge of 3D graphics, modeling, and animation tools such as Cinema4D, Maya, or Unreal Engine
• Experience writing or troubleshooting scripts using languages such as C#, JavaScript, C++, or other programming languages
• Interest or knowledge of sports and sports culture

Education

• Bachelor’s degree or equivalent experience

Senior Real-Time Graphics Developer:

Bristol, CT (Hybrid – Onsite Monday–Thursday, Remote Friday)

Optomi, in partnership with a leading broadcast media organization, is seeking a Senior Real-Time Graphics Developer to support live production graphics and animation initiatives. This individual will be responsible for designing, developing, and deploying high-quality real-time graphics for live broadcast environments, working closely with production teams and technical partners to ensure seamless on-air execution.

This role offers the opportunity to contribute to high-profile live productions, drive innovation in real-time graphics systems, and collaborate with a highly creative and technical team.

What Type of Experience the Right Candidate Has:

• 8+ years of experience designing graphics for live broadcast or production environments
• Expert-level experience working with real-time broadcast graphics platforms (Vizrt preferred)
• Strong understanding of broadcast production technology and control room workflows
• Proven ability to create high-quality animation, typography, and graphics packages
• Experience building and maintaining graphics directories, templates, and production workflows
• Ability to mentor teammates and collaborate effectively with technical and creative stakeholders
• Portfolio or demo reel showcasing broadcast graphics and animation work

Responsibilities of the Right Candidate:

• Design, develop, and deploy real-time graphics and animation packages for live production environments
• Build, maintain, and update graphics directories and templates
• Collaborate with production and engineering teams to ensure graphics systems perform seamlessly during broadcasts
• Develop and improve graphics workflows, tools, and automation processes
• Troubleshoot graphics systems and provide technical support during live productions
• Translate creative direction and production needs into effective visual graphics solutions
• Mentor and support teammates in graphics development and workflow optimization

What the Right Candidate Will Enjoy:

• Working in a fast-paced, creative broadcast production environment
• Designing and deploying cutting-edge real-time graphics for live programming
• Collaborating with cross-functional teams including production, engineering, and creative teams
• Contributing to the development of workflows, graphics systems, and animation packages
• A hybrid schedule with remote Fridays

Bauer is seeking a Buyer to support procurement, supplier coordination, and material availability for our FAA Part 145 aerospace MRO operation. This role is responsible for sourcing and purchasing aircraft engine accessory parts, repair services, and special process services necessary to support component teardown, repair, overhaul, and return-to-service activities. The Buyer will work closely with Quality, Engineering, and Shop Operations to ensure timely material availability while maintaining full FAA-compliant traceability and documentation. The successful candidate will support supplier management, coordinate repair and exchange transactions, and ensure material flow aligns with production schedules and turnaround time commitments.

Key Responsibilities

Procurement & Material Sourcing

• Source and purchase aircraft engine accessory parts, rotables, and consumables required for component repair and overhaul
• Obtain quotations, negotiate pricing and delivery terms, and issue purchase orders
• Support sourcing of OEM, PMA, DER-approved, and aftermarket components where applicable
• Monitor open purchase orders to ensure timely delivery and resolve supplier delays
• Coordinate repair, exchange, and replacement transactions with external suppliers and service providers

Supplier Coordination & Special Process Support

• Work with approved vendors providing special processes such as NDT, plating, heat treat, and other subcontracted repair services
• Assist with supplier communication regarding turnaround times, pricing, and technical requirements
• Support supplier performance monitoring and corrective action activities when issues arise
• Maintain accurate supplier records and documentation supporting traceability and compliance

Material Planning & Inventory Support

• Coordinate material procurement in support of teardown findings, repair routing requirements, and production schedules
• Support forecasting and planning for replacement parts and rotables required for repair operations
• Assist with inventory management activities including stock replenishment and reorder levels
• Work with operations and inspection personnel to ensure materials are available when required for production

Receiving Documentation & Regulatory Compliance

• Support FAA-compliant receiving documentation review, including validation of:
• FAA Form 8130-3
• EASA Form 1
• Certificate of Conformance
• traceability documentation
• Ensure all purchased materials meet regulatory and quality requirements prior to acceptance
• Maintain documentation records supporting full traceability for FAA and customer audits

Logistics & Material Movement

• Coordinate shipment of parts to suppliers for repair or processing
• Arrange inbound and outbound shipments including domestic and international logistics where applicable
• Support proper handling, packaging, and documentation of aircraft components and materials

Preferred Qualifications

Education & Credentials

• Bachelor’s degree in Supply Chain, Aviation Management, Business, or related field preferred
• APICS / CPIM certification a plus

Experience

• Minimum 3 years of procurement or supply chain experience in aerospace, aviation MRO, or aerospace manufacturing
• Experience sourcing aircraft components, repair services, or aviation materials
• Familiarity with FAA traceability requirements and aircraft documentation standards
• Exposure to engine accessory components or turbine engine support environments

Systems & Technical Skills

• ERP experience (Quantum, SAP, Oracle, or similar)
• Proficiency with Microsoft Excel
• Experience using aviation aftermarket marketplaces (ILS, PartsBase, OEM portals)
• Working knowledge of FAA documentation and traceability requirements

Core Competencies

• Strong supplier coordination and procurement skills
• Ability to manage multiple purchase orders and supplier communications simultaneously
• Attention to detail in reviewing documentation and traceability
• Strong collaboration with Quality, Engineering, and Operations teams
• Organized and responsive in a fast-paced MRO environment
• Ability to balance cost, availability, and turnaround time requirements

Additional Requirements

• Fluency in written and spoken English
• Must be a “U.S. Person” per ITAR requirements
• Enrollment in FAA-compliant Drug & Alcohol Program required
• Must pass DOT-compliant pre-employment drug screen and background check
• Ability to lift up to 40 lbs; some standing, walking, and bending required

RBC Bearings Incorporated (NASDAQ: ROLL) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense, and aerospace industries. Founded in 1919, the company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in 11 countries and our market capitalization is approximately $13.5 billion.

Job Title/Location: Manager of Real Estate & Construction

Summary: The Manager of Real Estate & Construction is responsible for overseeing all facets of property development, building projects, and commercial leasing activities. This role requires a unique blend of real estate expertise and construction project management skills to ensure projects are completed safely, on time, within budget, and aligned with business objectives. In addition, the manager identifies potential sites, manages broker and landlord relationships, and negotiates lease terms and conditions to maximize occupancy rates and achieve financial goals across the property portfolio.

Key Responsibilities:

• Site Identification & Market Analysis
• Broker & Landlord Relations
• Lease Negotiation & Documentation
• Portfolio & Tenant Management
• Project Management
• Financial Oversight
• Contract & Vendor Management
• Compliance & Permitting
• Site & Quality Control
• Stakeholder Communication
• Strategic Planning

Job Qualifications/Education:

• Experience: Proven experience in construction project management, real estate development, or a similar role, 10+ years.
• Technical Skills: Strong understanding of construction technologies, contracts, technical drawings, and project management software (e.g., Builder trend, Procore).
• Soft Skills: Excellent organizational, leadership, communication, problem-solving, and decision-making skills.

We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan.

RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Major Areas of Responsibility:

• Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)
• Will work with blueprints, operation sheets, and other work instructions.
• Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
• Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.
• Performs complex set-ups of own work or for others.
• Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.
• Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
• Ensures that all manufactured parts are in full compliance to quality standards.
• Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
• Replaces all worn or damaged tooling as necessary.
• Verifies and records actual part count, both prior to and upon completion of all work
• Performs all routine maintenance on the equipment and maintains all fluid levels.
• Keeps the equipment and work area clean and organized.
• Returns excess bar stock or material to the staging area.
• Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap.
• Notifies leadperson or supervisor of any parts shortages or machining problems/difficulties.
• Packs and washes/preserves parts as needed.
• Performs other machining and assembly operations as needed.
• Performs other related duties as required.
• Interacts with associates from all departments.
  

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI203eae3637ca-26289-38787192

• Medical, Dental, Vision
• 401k with company match
• Generous PTO / sick leave
• 100% remote
• Competitive compensation & equity
• Annual performance bonuses

• Lead and mentor engineers across both Data and Platform teams, fostering a culture of ownership, innovation, and collaboration.
• Define and execute the technical vision for data infrastructure, pipelines, and platform architecture.
• Collaborate with Product, Engineering, and Business stakeholders to align engineering efforts with company goals.
• Drive hiring, onboarding, and career development for team members.
• Ensure high standards of code quality, reliability, and performance across systems.
• Oversee the design and implementation of scalable data solutions and platform services.
• Champion DevOps, observability, and automation best practices.

• Proven experience managing engineering teams in a high-growth environment.
• Strong technical background in data engineering, platform/infrastructure engineering, or both.
• Experience with cloud platforms (AWS, GCP, or Azure), CI/CD, and container orchestration (e.g., Kubernetes).
• Familiarity with modern data stack tools (e.g., Airflow, dbt, Spark, Kafka).
• Excellent communication and leadership skills.
• Ability to balance strategic thinking with hands-on execution.
• Experience in B2B SaaS or product-led growth environments.
• Background in security, compliance, or data governance.
• Prior experience scaling engineering teams from early-stage to maturity

• Accelerated Career Growth!
• Competitive Base Salary and Bonus!

• Develop, implement, and improve welding processes and procedures to enhance product quality and productivity.
• Utilize CAD, AutoCAD, and SolidWorks to design and develop welding fixtures and tooling.
• Lead the implementation of New Product Introduction (NPI) processes for welding operations.
• Apply Lean Manufacturing principles to optimize welding processes and reduce waste.
• Collaborate with cross-functional teams to address and resolve manufacturing, quality, and reliability issues.
• Train and mentor junior engineers and technicians on welding techniques and procedures.
• Conduct root cause analysis of welding defects and implement corrective actions.
• Manage welding equipment maintenance and calibration to ensure optimal performance.
• Stay abreast of the latest advancements in welding technologies and industry best practices.

• Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in weld manufacturing engineering.
• Proven experience with CAD, AutoCAD, and SolidWorks.
• Excellent knowledge of laser and robotic welding techniques.
• Strong understanding of Lean Manufacturing principles.
• Experience with New Product Introduction (NPI) processes.
• Exceptional problem-solving and analytical skills.
• Excellent communication and leadership skills.
• Ability to work effectively in a fast-paced, team-oriented environment.
• Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification is a plus.