Engineering Jobs in Lannon, WI

Under the direction of the Engineering Manager, the Design Engineer is responsible for the support of new and existing products. This support may include, but is not limited to, product development, prototype generation, laboratory testing and problem solving, from concept to production.

ESSENTIAL DUTIES AND RESPONSIBILITIES

All employees work to satisfy the customer. Each department has expected core responsibilities, but these responsibilities do not define us. Rather, they simply provide a starting point where we work to satisfy the customer, and continuously improve ourselves, others, and the organization.

· Responsible for understanding the customer’s technical scope of work and delivering designs that meet or exceed expectations.

· Analyzes engineering sketches, specifications, data, drawings and models to determine design factors as well as tolerancing.

· Uses computer aided design tools for two- and three-dimensional magnetic analysis, computation fluid analysis, structural finite element analysis to develop and optimize designs.

· Designs for manufacturability

· Uses lab equipment such as force testers, multimeters, flow meters and environmental chambers to ensure products exceed customer requirements.

· Uses hand tool, soldering tools, and presses to build prototypes and customer evaluations

· Participates and/or leads design reviews and records meeting notes and lessons learned.

· Evaluates and approve design changes, specifications, and drawing releases to ensure compliance with both internal and external specifications and standards.

· Controls drawings, models, and other applicable documents.

· Shall utilize and improve engineering tools with the goal of creating and following consistent processes that ends with a predictable result. Examples of tools include Phase-Gate, FMEA, Control Plans, Engineering Change process, Tolerance Stack-up Calculations, Force Balances, Design for Manufacturing tools, Design Verification Plans, Process Validation, Capability Studies, Measurement System Evaluations, Quality Management and Production Part Approval Processes.

· Support sales staff by providing technical data to present to customers.

· Interface with other departments within and external customers and suppliers.

· Follows policies and procedures according to Quality Management System.

· All other duties as assigned.

Design Engineer

Behavioral

· Must have the potential to advance to Sr Design Engineer

· Proactive on tasks (Completes in a timely manner, uses tools to track task)

· Responsible (demonstrate that others can trust you)

· Demonstrates that he or she can be part of a solution (both technical and behavioral)

· Good verbal and written skills, in both a technical and non-technical environment

Demonstrated Competence:

· Good mechanical aptitude, and working knowledge of different materials (metals, plastics, etc.), coatings/finishes, and hardware.

· Good working knowledge of different manufacturing processes; CNC, injection molding, welding, turning, milling, etc.

· Good working knowledge of spring design

· Ability to support customer meetings and work directly with customers on design-related tasks.

· Ability to work with suppliers as it relates to prototype builds and associated changes and corrections.

· Able to design product(s) with input from others on lessons learned and best practices.

· Tends to work on projects, and not programs involving multiple designs and products.

· Participates in Root Cause analysis, DFMEAs, PFMEAs, Control Plans, Corrective Actions and other Quality activities.

· Understands the Cost of Goods (COGS) and how design impacts the material and manufacturing costs.

· Identifies design constraints and works with internal and external resources to resolve the constraints.

· Understands and utilizes all applicable processes and procedures.

Education and/or Experience:

· Bachelor's Degree (BS) from an accredited college or university in an Engineering related field or acceptable type and amount of work experience in a design role.

· 1-year design experience.

· Basic working knowledge of Microsoft Suite of products with a strong working knowledge of Excel.

· Demonstrated knowledge of SolidWorks or other 3D Modeling software.

· Experience with DFMEA, PFMEA, DOE, and other AIAG procedures preferred.

· Experience with magnetic analyses, computation fluid dynamics and finite element analysis preferred.

Job Summary:

The Manufacturing Engineer will work at a technical expertise level involving process development fundamentals that support corrections/improvements/risk management. The engineer will also develop and execute plans to continuously improve and optimize product quality and process yield by evaluating new materials, processes, and equipment.

The ideal candidate would have experience in a Lean Transformation and be proficient in deploying tools such as Value Stream Mapping, Kanban, Single-Minute Exchange of Dies (SMED), Fishbone diagrams, RCA, Control Charts, Gemba Boards, OEE, Gemba walks, 5S, A3 reporting, and other methodologies to mitigate waste TIM WOOD.

Essential Duties and Responsibilities:

• Manage implementation of new products and product revisions for assigned projects.
• Responsible for identifying and implementing process-related continuous improvement activities to improve product quality and increase Overall Equipment Effectiveness (OEE).
• Ensure all process developments and improvements meet the Quality Management System requirements.
• Create working drawings/digital files/CNC programming as necessary.
• Engage with the appropriate personnel to identify and resolve corrective/preventative actions to address quality, technical, and manufacturing issues.
• Project Management – Accurate development, research, planning, timely delivery, and reporting for all project deliverables.
• Keep current on new developments and technologies in assigned disciplines and proactively present new ‘Best Practice’ methodologies, procedures, processes, and equipment to the company.
• Utilize various business software programs to create new and edit existing manufacturing floor work orders; update process standards; and analyze, troubleshoot, and trend historical process equipment and production data.
• Led the Lean Kaizen and Six Sigma teams as necessary to increase production efficiency and reduce cost.
• Work with outside vendors to develop new equipment and implement modifications to existing equipment.
• Work closely with operations (including but not limited to maintenance and supply chain) daily to support the entire production floor through continuous improvements to processes and equipment and clear and concise communication with line leaders and production personnel.
• Lead the implementation of engineering changes at the operations level. Coordinate changeovers for materials and processes. Update PFMEA, QCP, and work instructions to ensure quality.
• Perform root cause analysis for customer complaints and document them in an 8D while implementing corrective actions.
• Responsible for process design for new product introductions. Coordinate team efforts during line trials for experimental formulas and compounds for new products or cost-saving initiatives.
• Optimizes material yields to reduce waste and improve product quality.
• Advocates the need to change materials to R&D to reduce costs from an inefficient process or excessive waste.
• Optimizes a continuous process to reduce labor through lean or updating process technology.
• Process improvements that ensure the workforce remains safe. Perform job hazard analysis and equipment start-ups before handoff to operations.
• Assist with quoting an estimate of jobs for the commercial team.
• Other related responsibilities.

Qualifications/Skills/Experience Required:

• 4 – 7 years of engineering work experience in manufacturing settings.
• Ability to work on own initiative.
• Good interpersonal and communication skills with proven leadership abilities.
• Bachelor of Science Degree in Engineering, preferably Mechanical or Industrial Engineering or other related Engineering field, or comparable work experience. with
• Experience working in plastics, paper mill, concrete, or food industry would be a plus.
• 2D software proficiency required. 3D software experience is a plus. Preferences: 2D – AutoCad, 3D – Creo or Solidworks
• High proficiency in creating advanced spreadsheets, utilizing macros, and developing forms with MS Excel and statistical software (e.g. Minitab, JMP)
• Achievement of Six Sigma/Green Belt/Black Belt accreditation would be a distinct advantage, including but not limited to Lean Manufacturing experience and accreditation.
• Proven project management experience with medium to large-scale/complex projects.
• ERP and similar types of business information systems experience very desirable.
• Relevant experience with statistical process control and capability analysis is required.
• Excellent analytical and problem-solving skills, root cause analysis, and risk assessments with strong attention to detail.
• Working knowledge of FMEA and QCP tools.
• Must be flexible and able to manage multiple priorities simultaneously.
• Minimal domestic travel (

Why join AVIRE?

Do you have an entrepreneurial mindset? Do you like being part of high growth, high impact environments? Are you looking for an opportunity to lead a world class team intent on providing an unrivalled customer experience? If you have answered yes to these questions, we should connect!

The Avire Sussex, WI team is looking for a highly driven, highly motivated individual to take us to new heights. In this role, you will be responsible for planning, coordinating, and deploying the resources necessary to ensure our manufacturing capabilities grow with the organization focusing on continuous improvement--ensuring that our team is supported to effectively build high-quality products for our customers. Our assembly team is critical to our success as an organization as we produce high quality products that surpass customer expectations. You will be a part of a team of dedicated Production, Shipping and Receiving personnel, Supply Chain professionals, Technical Support Specialists, and Operations experts with the collective goal of supplying high quality products with a best-in-class lead-time exceeding our customer’s highest expectations. Further, you will be a part of a team that has a track record of delivering double digit compound growth while supporting each other. This position reports to the Operations Manager.

What you will do:

1. Sets clear, attainable production-level and cell-level production targets and direct the team to meet these objectives.
2. Manage daily production activities for the assembly cells including scheduling, production quality, material shortages and nonconformance reporting.
3. Manage the production employees, including performance management, health and safety, and individual training & development.
4. Work cross-functionally to ensure effective production processes and align resources to meet both customer & business demands.
5. Work directly with product management to ensure sustainable production for critical products while providing guidance to drive design for manufacturing/design for automation improvements. Facilitates new product integration and manages related engineering changes.
6. Build a culture of continuous improvement to ensure effective labor and materials management are engrained in everyday activities. Support continuous improvement initiatives and implement and evaluate outcomes.
7. Work directly with operational leadership to manage production requirements in alignment with business objectives & strategies and prepare monthly production reports.
8. Maintain production standards to ensure accurate labor reporting and costing.
9. Ensure compliance with local standards and maintains a safe working environment.
10. Perform other duties as assigned.

We want someone who displays:

Action-Oriented Curiosity: You readily take on challenges, and you identify and seize new opportunities. You have an outstanding history of delivering on your projects. You work on the problems that truly need solving, and you effectively challenge the organization to be better. You can cut through the clutter and focus on the priorities that align with organizational objectives.

Collaboration: You embrace the unique experiences, viewpoints, and abilities of your teammates and proactively engage those differences to come to the best possible outcome.

Empowerment: You thrive in an environment where you can make decisions. You do not shy away from taking a stand, and you recognize the importance of challenging the team to ensure that we strive for more. You take responsibility to solve customer problems the first time.

Accountability: You take responsibility for your actions, and you deliver on your commitments.

Inclusion: In all aspects of your work, you treat everyone with respect.

Performance Objectives

1. Cells are functioning effectively and team members are deployed in alignment with the needs of the business.
2. Lean principles are implemented and driven throughout the organization.
3. Performance management, including training & development, is process-driven and implemented consistently throughout the manufacturing team.
4. Plan production schedule and allocate resources to drive efficient, timely output, targeting improved productivity.

Job Skills

• Strong interpersonal and communication skills
• Proven problem-solving proficiency
• Proven ability to lead hourly employees in a manufacturing environment
• Experience in electronics manufacturing a plus
• Experience with KPI metric management and deployment
• Excellent written, verbal, and interpersonal skills to work effectively with diverse groups of people both within, and outside, of the organization.

Qualifications

• Bachelor’s degree in engineering, engineering management, supply chain or a related field
• A minimum of 5 years’ experience in a production environment holding positions of progressive responsibility
• Alternative combinations of education and experience will be considered
• A minimum of 3 years’ experience in a direct management position
• Strong interpersonal and communication skills at all organizational levels
• Strong decision-making skills and results-driven approach
• Proven analytical ability and familiarity with a KPI-driven operations environment
• Proficiency in Lean Principles a plus: Problem Solving, 5S, Flow, Standard Work, Kanban

Who is AVIRE?

Connecting and Protecting People. AVIRE combines 4 market-leading brands (Rath, Janus, Microkey, and Memco) within the elevator and emergency communications industries; currently offering light curtains, area of refuge, emergency telephones / GSMs, and life safety solutions. Each brand has a strong market presence, a unique identity, a distinct product range, and a long, successful history. The group has manufacturing locations in 2 countries, R&D in 2 countries and Sales & Marketing in 8 countries employing over 400 people globally.

AVIRE is part of the Halma group ( ). Halma bets on talent! We are looking for bright, ambitious people to join our team and stay for the long term. With over 50 businesses under its ownership, Halma is a great place to start, advance, or accelerate your career.

Benefits

• Competitive salary
• Organizational bonus plan
• Complete benefits package including health, dental & vision insurance, 401K, paid vacation, paid holidays, and generous parental leave
• Professional development training opportunities
• Company events (i.e. bbq’s, lunches, bowling and much more)!
• 4 x 10 hour schedule Monday – Thursday

About the Company

MRPC is an Affirmative Action Equal Opportunity Employer: Minorities, Women, Veterans, & Disabilities.

About the Role

Under the general supervision of the Director of Manufacturing or Production Manager, the Production Supervisor is responsible for supervising the production team and scheduling shift production activities. This individual will also provide hands on assistance with machine set-ups.

Responsibilities

• Schedule and assign work to production personnel, to support production schedule and priorities.
• Supply stock/supplies to the production areas as required.
• Maintain the required shift reports to include machine counts, rejection rates, and labor reports.
• Ensure that all personnel are properly trained in the job functions associated with specific work assignments including manufacturing procedures, quality requirements and proper use of all tools.
• Follow established ISO and production procedures, ensure that all production employees are properly trained and are following procedures. Recommend changes to the procedures that will improve quality and/or productivity.
• Make hire, discipline and promotion recommendations of subordinates. Prepare annual written performance reviews and establish annual objectives consistent with the overall business strategy.
• Ensure the maintenance of general housekeeping for the department.
• Coordinate tool repairs/modifications with tool room and engineering.
• Perform all activities required to operate equipment, adjusting machinery to meet operating parameters specified.
• Following specifications, determine the appropriate methods of equipment operation. May operate several presses simultaneously.
• Perform new job or mold sampling when necessary, working with engineering.
• Perform other duties as assigned.

Qualifications

• High School Diploma or GED
• Injection molding experience
• Demonstrated leadership, project management, facilitation and problem-solving
• Strong interpersonal and communication skills
• Ability to manage multiple priorities
• Strong team player

Required Skills

• Injection molding experience
• Demonstrated leadership, project management, facilitation and problem-solving
• Strong interpersonal and communication skills
• Ability to manage multiple priorities
• Strong team player

Preferred Skills

• None specified

Pay range and compensation package

Not specified

Equal Opportunity Statement

MRPC is an Affirmative Action Equal Opportunity Employer: Minorities, Women, Veterans, & Disabilities.

Quality Engineer

As a Quality Engineer, you will assist with the development of quality systems, procedures and controls to ensure that all medical products consistently meet performance and quality specifications in the Germantown Manufacturing facility. The Quality Engineer is a leader and strong technical resource who quickly and effectively resolves quality problems with internal and external customers and suppliers.

Below Are Additional Duties And Responsibilities

• Generates, communicates, and implements ideas and solutions.
• Demonstrates accuracy and thoroughness in completing tasks timely.
• Looks for ways to improve and promote quality.
• Monitor Corrective Action System (i.e. Customer Complaints, Supplier, Internal)
• Initiate and investigate Customer Complaints according to our internal procedure and standards.
• Record essential information on internal and/or customer-specific documentation, including updating customer portals.
• Perform investigations using Lean, Six Sigma, and statistical methods to support root cause analysis and corrective actions.
• Identify gaps and/or trends in systems or processes.
• Initiate and facilitate the Corrective/Preventative Action process using the appropriate quality tools and input from subject matter experts (SME) to implement sustainable solutions.
• Update Quality documents according to our Change Control procedures, as required.
• Verify corrective action effectiveness.
• Drive Non-Conformance Process
• Evaluate and investigate suspect non-conforming product identified by manufacturing and/or the Quality Lab.
• Initiate containment activities, as necessary, with Customer Service and Shipping Department.
• Recommend disposition of product based on thorough investigation and data-driven feedback.
• Initiate and assist Customer Service with Return Material Authorization (RMA) process.
• Develop re-inspection, sort, and/or rework instructions for Manufacturing Operators, as required.
• Collaborate with customer on issuing waiver or deviation documentation and obtain customer approval, as required.
• Maintain the Quality Management System (QMS).
• Understand ISO 13485 Quality management systems requirements.
• Ensure continuing compliance to both internal processes as well as requirements imposed by certification bodies, regulatory agencies, and specific customer requirements.
• Assist in internal, 2nd party, and 3rd party audits.
• Assist with responses and corrective actions for audit findings.
• Support Product Realization process
• Participate in design review, process planning, and failure mode analysis
• Provide input on evaluation of Key Product Characteristics.
• Provide input on gaging methods and equipment.
• Interpret customer requirements including complex blueprints and GD&T call-outs.
• Review and approve Engineering Change Notifications and Verifications
• Evaluate for feasibility and implement updates to customer requirements into associated product control plans, pFMEA, Inspection documentation and other related documents.
• Incorporate industry standard best practices.
• Incorporate lessons learned.
• Evaluate, submit and track Supplier Change Notices to customers and/or suppliers.
• Any other duties as assigned.
• Manufacturing point of contact for the review and disposition of product quality related questions.
• Approve Medical Device release for shipment, as required.
• Perform batch record reviews for medical device prior to release for shipment.
• Generate Certificate of Analysis, as required.
• Release product in ERP system based on customer and process requirements.
• Support Manufacturing process
• Train Manufacturing and Quality Control personnel on customer requirements, inspection techniques, lessons learned, and rework instructions.
• Manage product inspection and testing activities.
• Obtain customer approvals for all required changes based on Quality Agreements.
• Compile supporting measurement and process performance data, as necessary
• Assemble supporting documentation package and review for completeness and accuracy
• Review and approve production documentation updates according to our Engineering Change Order process.

Sr. Sourcing Specialist-Indirect Materials

Waukesha, WI

Description

CentroMotion is looking to hire a Sr. Sourcing Specialist that will support in the development and implementation of commodity / supply chain activities that significantly contributes to year over year sales growth and operational improvement through Total Cost of Ownership (TCO) sourcing process. Primary responsibilities include preparing, reviewing, analyzing, and executing sourcing activities and projects which solve problems and improve supply chain metrics.

ESSENTIAL DUTIES / RESPONSIBILITIES:

· Part of the global sourcing team supporting the sourcing of cluster of indirect procurement categories at a global and regional level, including: MRO, factory materials, goods and services, capital equipment, utilities, professional services, etc..

· Supports new supplier development and leads cost reduction and CapEx purchasing projects across the categories assigned at a global and regional level.

· Serves as an extension of the core team that implements best practice standardization in terms of sourcing processes, procurement market strategies, supplier strategies and risk mitigation.

· Maintains subject matter understanding specific to assigned categories: procurement market, commodity markets, cost driver and risk mitigation.

· Supports Strategic Sourcing Managers to source products and services, assist supplier audits, negotiate tooling and pricing, write contracts, perform value analysis to ensure supplier contract and timeline compliance.

· Assist in improving supplier performance metrics and scorecards.

· Working within the category cluster/team, this role is responsible for executing projects, analysis, and necessary tasks to deliver the team’s sourcing strategy to key stakeholders that includes engineering, sales, operations, quality etc.

· Lead assigned analysis, projects, and execute actions in order to make improvements in total cost including terms, freight, unit cost, quality improvement and inventory reduction.

· Analyze and report on global commodity indexes and macro-environment trends to ensure uninterrupted flow of product at current or better cost.

· Visit suppliers for continuous improvement and project execution in partnership with the Strategic Sourcing Manager.

Education:

• Bachelor’s degree in a technical or business field
• CPIM and or equivalent professional certification will be an advantage
• Travel Requirements – 10% domestic

Experience:

Seeking a Senior Sourcing Specialist to lead Indirect procurement with emphasis on Capex,, MRO, and Logistics. This role requires a strong sourcing professional who brings solid process knowledge yet can operate effectively in a fluid, evolving environment. The ideal candidate will help strengthen procurement procedures, drive policy development, and build alignment across Finance, Operations, and Manufacturing Engineering.

Key Responsibilities:

· Lead sourcing for Capex,, MRO, and Logistics categories, including strategic souring management, negotiation, and contracting.

· Partner with cross-functional teams on capital projects, maintenance planning, and operational needs.

· Shape and improve procurement processes, policies, and standard work.

· Drive supplier selection, performance management, and cost-reduction initiatives.

· Enhance spend visibility and support financial alignment with budgeting/approvals.

Qualifications

· 5+ years Indirect Procurement experience with demonstrated work in CapEx, MRO, or Logistics.

· Strong negotiation, contracting, and supplier management skills.

· Ability to work in ambiguous or developing-process environments.

· Proven cross-functional influence and communication skills.

· Experience in manufacturing environments preferred.

Ideal Candidate:

A hands-on, adaptable sourcing expert who can balance daily execution with process development—helping elevate procurement maturity while delivering immediate value.

What We Offer

• Comprehensive Health Benefits: Enjoy medical, dental, and vision coverage for positions of 30+ hours/week.
• Health Savings Account: Benefit from annual employer contributions to your HSA.
• Company-Provided Insurance: We offer life insurance, accidental death and dismemberment coverage, and short-term disability insurance.
• Voluntary Insurance Options: Choose additional coverage for yourself, your spouse, and your children, including critical illness, accident, hospital indemnity, and long-term disability insurance.
• 401(k) Plan: Take advantage of our 401(k) with matching contributions, fully vested from day one.
• Educational Support: Access tuition reimbursement and scholarship opportunities to further your education.
• Lifestyle Reimbursement: Receive a $150 Amazon gift card upon completion of your annual physical.
• Wellness Program: Participate in health coaching, monthly webinars, quarterly challenges, and earn gift card incentives for participation and earning points.
• Safe Work Environment: Work in a clean and safe environment.
• Generous Paid Time Off: Enjoy 14 paid holidays, including a holiday shutdown between Christmas and New Year’s, plus paid vacation available from day one.
• Paid Parental Leave: Take advantage of paid parental leave to support your family.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-Onsite

#LI-KN1

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
HellermannTyton North America (HT NA) is accelerating the use of Artificial Intelligence to unlock capacity, improve quality, and fuel growth across North America. As the AI Program Manager, you will build and run a program of AI initiatives that create efficiencies by automating repetitive tasks and removing process waste. You will partner with Operations, Sales, Marketing, IT, HR, and Finance to select the right problems, deliver measurable outcomes quickly, and scale wins across plant sites to increase revenue, reduce cost, and eliminate waste. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

What You'll Do

Opportunity Discovery

• 
  
  
• Conduct stakeholder interviews to capture business objectives and constraints; translate high-level goals into clear, actionable AI project requirements.
  
  
• Build simple business cases with the respective departments; baseline current performance, and quantify benefits
  
  

Program Management

• 
  
  
• Work with Business Stakeholders to prioritize initiatives by value, impact, labor hour avoidance, and risk mitigation.
  
  
• Prioritize AI program and project roadmap into short, iterative deliverables; prioritize delivery based on business impact and feasibility.
  
  
• Run stage-gated delivery (scope pilot scale) aligned to HellermannTyton COE project governance; set decision forums, risk controls, and incremental results.
  
  
• Work with Business and IT to develop data and IT infrastructure and tools to support AI program roadmap.
  
  

Delivery

• 
  
  
• Ensure ownership of agents and AI workflows are transitioned to business stakeholders within the business.
  
  
• Engage with change management to ensure AI projects are accepted, and AI becomes integrated into processes such that AI becomes "the way we work."
  
  
• Make value visible and auditable. Track and report on program benefit metrics such as savings, improved experience, reduced waste, efficiency improvements, etc.
  
  
• Share AI knowledge to upskill the organization. Coach stakeholders to see AI use cases in the processes.
  
  

Governance

• 
  
  
• Partner with Legal/HR on data privacy and AI use policies.
  
  
• Ensure solutions comply with IT corporate cybersecurity and risk guidelines.
  
  

Success in this role will require:

• 
  
  
• Collaboration & Communication
  
  
• Adaptability
  
  
• Problem Solving
  
  
• Analytical Thinking
  
  
• Business Acumen
  
  

What You'll Bring

• 
  
  
• Bachelor's degree in Project/Program Management, Engineering, Manufacturing, Computer Science, Data/Analytics, or related field.
  
  
• 3+ years leading data/AI/automation programs with manufacturing operations; proven track record delivering hard dollar benefits and labor hour avoidance.
  
  
• Mastery of program management (business cases, roadmaps, stage gates, financials).
  
  
• Excellent stakeholder communication and leadership across Operations, Sales, Marketing, IT, HR, and Finance.
  
  

Preferred Qualifications

• 
  
  
• Background manufacturing or associated environments.
  
  
• Lean / Six Sigma certification; experience embedding AI within continuous improvement programs.
  
  
• Experience with AI Tools (MS CoPilot Studio, MS Fabric, MS Azure Foundry)
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Area Sales Manager - Industrial

Position is remote-based. Candidate will live in the Phoenix, Az area and work within the territory of:

Arizona, New Mexico, Southern Nevada, and Southern California

Job Summary:

Under the direction of and with feedback and coaching from the Regional Sales Manager, the Area Sales Manager is responsible for the development and sales of the HellermannTyton product line, with an emphasis on developing end-user project opportunities, including spec positions with named customers and prospects, in collaboration with our distribution channel partners. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Development and sales of the HellermannTyton product line through distribution to key markets such as industrial, electronic, and telecommunication.
  
  
• Provide training and technical expertise to new and existing customers.
  
  
• Other duties as assigned.
  
  

Success in this role will require

• 
  
  
• The ability to generate sales to achieve quota leveraging excellent planning & organization skills, verbal and written communication skills
  
  
• Ability to professionally assess customer technical and business needs and demonstrate the value and application of the full HellermannTyton product line, and provide training and technical expertise as required
  
  
• Detailed understanding of product lines and their applications and business value to customers and prospects - ability to cross-sell and upsell
  
  
• Skilled at integrating industry insights with customer application requirements to recommend optimal product solutions that accelerate adoption and increase sales
  
  
• Must have technical aptitude, familiarity with engineering drawings, and the ability to achieve specification position at end users
  
  
• Self-motivated, assertive, and proactive - takes initiative to see things through to completion
  
  
• Skill and focus on prospecting and new business development
  
  
• Ability to keep detailed account records and leverage sales support, marketing, and administrative systems
  
  
• Recognize and convey company value proposition to optimize brand positioning
  
  
• Delegate as indicated to departments designed to handle defined requests
  
  

What You'll Bring

• 
  
  
• Bachelor's degree in a related field preferred. In lieu of a BS/BA, an associate degree plus 10 years of proven outside sales experience for a manufacturing company required
  
  
• Minimum of 2 years' industrial or electronics sales experience
  
  
• Excellent verbal and written communication skills
  
  
• Computer-literate with a solid understanding and ability to effectively manipulate Power BI, PowerPoint, and Excel
  
  
• Able to develop and balance portfolio of sales to ensure immediate, continuing, and larger sales developments are part of the sales mix
  
  
• The ability to lift/push/pull up to 50 lbs. required
  
  
• The ability to drive and travel a large percentage of the time throughout specified territory, averaging 1-2 overnight stays per week, with occasional air travel required
  
  
• Must have a valid driver's license, with an acceptable driving record
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

EHS Manager

Reporting to the Head of EHS and Sustainability, the EHS Manager is responsible for developing, implementing, and managing environmental, health, and safety programs within operations. This role ensures compliance with all relevant regulations and standards, including OSHA, EPA, and ISO certifications (ISO 45001, ISO 14001, and ISO 50001). The EHS Manager will lead initiatives to reduce workplace hazards, enhance safety culture, promote sustainability, and achieve continuous improvement in EHS performance. This position requires close collaboration with cross-functional teams to ensure the successful execution of EHS strategies. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Responsibilities:

Site EHS Leadership

• 
  
  
• Ensure operational alignment with HellermannTytons's OIMS framework, compliance with NA EHS Policies, ISO 14001, ISO 45001, and ISO 50001 standards, as well as regulations.
  
  
• Support site-specific EHS annual objectives, targets, and KPIs to drive facility performance improvements in EHS, sustainability, and regulatory compliance.
  
  
• Guide plant management on EHS initiatives, ensuring alignment with HellermannTyton's long-term goals of Zero Harm, continuous improvement, and environmental stewardship.
  
  
• Ensure completion of risk management processes, including risk assessments, hazard analysis (HAZOP), job safety analyses (JSA), and control of work (CoW) processes.
  
  

Incident Management and Root Cause Analysis

• 
  
  
• Lead investigations of all incidents, near misses, and environmental releases, ensuring that a thorough root cause analysis is conducted and that corrective and preventive actions are implemented.
  
  
• Oversee and manage the reporting of incidents in accordance with HellermannTyton's incident management protocols, ensuring all regulatory and corporate notifications are timely and complete.
  
  
• Develop lessons learned materials and facilitate knowledge-sharing sessions to prevent recurrence of incidents, embedding a culture of safety and accountability at all levels.
  
  

EHS Continuous Improvement & Auditing

• 
  
  
• Drive continuous improvement initiatives by conducting regular safety audits, management reviews, and inspections, ensuring that the site remains in full compliance with HellermannTyton's
  
  

OIMS, regulatory requirements, and industry best practices.

• 
  
  
• Lead EHS self-assessments and external audits, ensuring that gaps are identified, action plans are developed, and improvements are implemented.
  
  
• Utilize leading and lagging indicators to assess EHS performance, report trends to senior management, and support data-driven recommendations for improvement.
  
  

Emergency Preparedness & Response

• 
  
  
• Manage emergency response plans, including the establishment of emergency response teams, drills, and simulations, ensuring readiness for events such as fires, chemical spills, and natural disasters.
  
  
• Coordinate with local emergency services and regulatory bodies to ensure smooth collaboration in the event of an actual emergency.
  
  
• Regularly review emergency action plans to reflect current facility conditions, regulations, and best practices.
  
  

Other duties:

• 
  
  
• May take on other duties as assigned.
  
  
• May visit other sites take on EHS responsibilities as required.
  
  

Qualifications:

• 
  
  
• Bachelor's degree in Safety Engineering, Occupational Health and Safety, or equivalent experience.
  
  
• 5+ years of experience in safety or environmental management, preferably in a manufacturing or industrial setting.
  
  
• Strong knowledge of OSHA regulations and safety standards.
  
  
• Knowledge and experience of ISO 45001 & 14001.
  
  
• Excellent communication and interpersonal skills.
  
  
• Ability to travel regionally (5%).
  
  
• Flexible with job assignments and responsibilities.
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
The Sales Development Program Associate is part of a structured two-year rotational program designed to develop future sales leaders. This role provides exposure to multiple business functions, including Sales Operations, Customer Care, Channel Marketing, and Inside Sales. Participants will gain hands-on experience, build business acumen, and develop technical and interpersonal skills essential for success in client-facing roles.

Essential Functions

• 
  
  
• Complete a two-year rotational program with 6-month rotations across: (Sales Operations & Customer Care, Product Management, Channel Marketing, Inside Sales, and could have opportunities in other departments)
  
  
• Collaborate with cross-functional teams to understand processes and contribute to business objectives.
  
  
• Participate in training sessions focused on sales strategy, technical product knowledge, and leadership development.
  
  
• Engage in continuous feedback and coaching sessions with mentors and managers.
  
  
• Represent the company professionally in internal and external interactions.
  
  
• Deliver a capstone project integrating learnings from all rotations.
  
  
• Successful completion of the program positions participants for roles in Outside Sales, marketing, or other positions.
  
  

Other Functions
Other duties may be assigned as needed.

Key Competencies

• 
  
  
• Communication and relationship-building.
  
  
• Analytical thinking and problem-solving.
  
  
• Technical understanding of products and processes.
  
  
• Leadership potential and adaptability.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• Recent college graduate with a degree in Business, Engineering, or Industrial Distribution.
  
  
• Strong business acumen and mechanical aptitude (hands-on/tinkering mindset).
  
  
• Excellent public speaking and presentation skills.
  
  
• Ability to adapt to a fast-paced, changing environment and work cross-functionally.
  
  
• High intellectual curiosity and willingness to learn.
  
  
• Must have a valid driver's license, with an acceptable driving record, along with adequate insurance.
  
  

#LI-MS1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
Under the direction of the Maintenance Supervisor and Maintenance Leads, the Maintenance Technician 2 is responsible for all phases of maintenance including PM/PDM, PLC, electrical, hydraulic, pneumatic, Control systems and mechanical repair of all key process equipment .This will be achieved by maintaining HellermannTyton's Audited certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Investigate, diagnose and perform corrective actions on all key process equipment.
  
  
• Troubleshoot problems working from schematics, ladder diagrams, and drawings .
  
  
• Enter machine/ equipment repair requests into CMMS software database.
  
  
• Perform preventive/predictive maintenance inspections and complete repairs that may arise from those inspections.
  
  
• Assist with Industrial engineering projects.
  
  
• Installs and upgrades of key process equipment and systems
  
  
• Report to the maintenance leads or maintenance supervisor upon detection any machine/equipment/building discrepancies that can/will have detrimental effects.
  
  
• Practice lock-out tag-out procedures.
  
  

Other Functions

• 
  
  
• Communicate work that took place between shift to following shift.
  
  
• Attend and successfully complete forklift certification.
  
  
• Attend required training/ seminars.
  
  
• Complete purchase orders according to procedure and submit for approval.
  
  
• Required Personal Protective Equipment * safety shoes are to be worn at all time during your scheduled work hours. * Department manager/supervisor will cover additional PPE as required on department specific work instructions.
  
  
• All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE).
  
  
• Wearing your Personal Protective Equipment (PPE) is a condition of employment.
  
  
• Perform other duties as assigned.
  
  

Success in this role will require

• 
  
  
• Ability to complete PLC, electrical, hydraulic, pneumatics and mechanical repairs.
  
  
• Ability to read schematics, ladder diagrams, and drawings .
  
  
• Knowledge in the use of test equipment.
  
  
• Knowledge in industrial preventive/predictive maintenance practices.
  
  
• Knowledge in using a CMMS
  
  
• Knowledge in Quality and EMS certifications work instructions and procedures.
  
  
• Knowledge of the corrective action process.
  
  

What You'll Bring

• 
  
  
• Trained and Proficient in all MT 1 Requirements
  
  
• Has been in HellermannTyton's Maintenance department for 5+ years, or at least 6 years of relevant work experience, Comparable Military service training, or completion of a skilled trade diploma, certificate, apprenticeship, or associate degree. Or per Manager and Supervisor's agreed recommendation.
  
  
• Ability to Investigate, diagnose and perform corrective actions, Projects, and PM/PDM's on all key process equipment and systems on their own or as part of a team.
  
  
• Able to complete upgrades, designing modifications/prototypes, and new installations of key process equipment.
  
  
• Assist IE's, Quality, Manufacturing, Tooling/Tool room and Automation on projects, new tooling, or corrective actions.
  
  
• Assist with keeping CMMS Instructions and Equipment updated.
  
  
• Assist with training of MT level Technicians
  
  
• Efficient verbal and written communication skills within the department
  
  
• Must have valid drivers license, adequate insurance and acceptable driving record.
  
  

#LI-MS1 #LI-Onsite

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Description

The Toolmaker/Moldmaker is responsible for working with the lead mold maker to build new tooling per CAD or detailed prints, evaluating, maintaining, and repairing existing molds and production tooling. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions

• 
  
  
• Must be able to build new tooling and components with minimal supervision
  
  
• Identify and communicate any possible tooling problems to the lead mold maker or supervisor
  
  
• Must be able to work well with lead mold makers and train mold maintenance technicians, and apprentices
  
  
• Must be able to operate all tool room equipment
  
  
• Must be able to perform mold maintenance and in-press mold changes
  
  
• Must be willing to work overtime based on production needs
  
  

Other Functions

• 
  
  
• Work with QA to identify quality concerns
  
  
• Maintain a clean and safe work area
  
  
• Performs other tasks as assigned
  
  
• Required Personal Protective Equipment: Safety shoes are to be worn at all times during your scheduled work hours.
  
  

What You Bring (Qualifications):

• 
  
  
• 3+ years of plastic injection molding building experience or successful completion of an apprenticeship program.
  
  
• Journeyman Tool & Die Maker certification/degree is preferred.
  
  
• High School diploma or equivalent required
  
  
• Knowledgeable in current mold-building techniques. This individual should have solid manufacturing concepts in plastic injection mold building
  
  
• Ability to read, interpret, and analyze engineering designs and computer-based CAD plans and models.
  
  
• Must possess good written and verbal communication skills
  
  
• Must have good problem-solving skills and be detail-oriented
  
  
• Ability to lift/push/pull up to 50 lbs.
  
  
• Must have own precision tools
  
  
• Prior forklift experience preferred
  
  

#LI-Onsite #LI-KN1

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary
Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. "

Essential Functions:

• 
  
  
• Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies.
  
  
• Collaborate and review suggested design improvements with Automation Engineer Design Team
  
  
• Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality
  
  
• Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault
  
  
• Use AB software to create/modify and update machine Programmable Logic Control programs as required.
  
  
• Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department.
  
  
• Possess advanced skills with vision systems and integration for quality inspections.
  
  
• Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team.
  
  
• Participate in project hand off processes that require process optimization, process flow, and assisting with training as required.
  
  
• Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings.
  
  
• Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team.
  
  
• Recommend and implement measures to improve equipment performance, quality and production methods.
  
  
• Stay current with technology and industry standards
  
  
• Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy
  
  

Other Functions

• 
  
  
• Travel could be required on a "as needed" basis
  
  
• Attend all meeting with cross-functional teams to review project work and direction
  
  
• Lend support through training and technical advice to help other technicians become more efficient.
  
  
• All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment.
  
  

Success in this role will require

• 
  
  
• Use of SolidWorks/Cad System
  
  
• Use of AB Programmable Logic Control software as required
  
  
• Six Sigma methodologies and practices
  
  
• Project management skills and creating documentation
  
  
• Ensure conformance to ASME codes as required
  
  
• Follow all IATF16949 and company standards for quality and manufacturability
  
  
• Manage and leverage resources to complete projects on time and within budget
  
  
• Vision System Integration and control
  
  
• Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements.
  
  
• Ability to effectively present information and respond to questions from groups, managers and fellow team members.
  
  
• Experience in communicating with suppliers and vendors
  
  
• Basic to advanced skills in pneumatic systems
  
  
• Advanced Programmable Logic Control knowledge
  
  

What You'll Bring

• 
  
  
• Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation.
  
  
• Ability to read and interpret documents such as technical specifications, schematics, and ladder logic
  
  
• Certified Six Sigma Green Belt is preferred
  
  
• Ability for overnight travel by air or land as needed.
  
  
• Must have a valid drivers license, with an acceptable driving record, along with adequate insurance
  
  

Rev. 9.21.2021

Job Summary
Under the direction of the Director of Sales - Automotive/Transportation, the Automotive Key Account Manager will focus on managing assigned tier accounts to enable sales growth. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation."

Essential Functions:

• 
  
  
• Establish strategies and actions with assigned tier accounts that will lead to growth in North America.
  
  
• Communicate consistently with global key account managers on assigned accounts to leverage global opportunities into sales for North America, as well as provide the global team with insights from North American activities to maximize global sales growth.
  
  
• Work very closely with the North American sales team to ensure assigned tier account activities, including specification, design, and pricing, at each OEM are managed most efficiently.
  
  
• Strengthen relationships with key tier account corporate design and purchasing personnel to communicate activities and opportunities from each OEM account into a comprehensive picture.
  
  
• Effectively present HellermannTyton's global strengths and capabilities to key account drivers to strengthen brand perception and increase vision for opportunities.
  
  
• Work with HellermannTyton North American sales team on OEM calls to further sales on key platforms and initiatives.
  
  
• Establish relationships within assigned tier accounts to generate new opportunities for HellermannTyton.
  
  
• Generate automotive production forecasts from IHS Automotive and analyze data as it pertains to HellermannTyton's customers or business potential.
  
  
• Proactively create recommendations for improvements to grow HellermannTyton's automotive business.
  
  

Other Functions

• 
  
  
• Attend industry events as required.
  
  
• Provide effective project management tracking for stated goals.
  
  

Success in this role will require

• 
  
  
• Strong skills in strategic planning and execution.
  
  
• Polished and effective salesmanship
  
  
• Ability to develop sales opportunities through a variety of channels
  
  
• Ability to close opportunities either directly or in conjunction with HellermannTyton North American sales team.
  
  
• Superior skills in tracking and execution of key opportunities
  
  
• Outgoing personality with the ability to connect with customer contacts who can directly or indirectly influence increased sales of HellermannTyton's solutions.
  
  
• Natural ability to create and support a team atmosphere.
  
  
• Technical ability to work with design engineers - read and interpret product drawings, make suggestions for improvements, and understand the CAD/technical environments in which they work.
  
  
• Ability to understand ROI principles and work toward creating more profitable sales
  
  
• Effective time management of key projects.
  
  
• Excellent verbal and written communication skills.
  
  
• Ability to work cross-functionally with all departments of an organization.
  
  
• Knowledge of IATF16949 quality systems and ISO14001 environmental systems.
  
  

What You'll Bring

• 
  
  
• Bachelor's degree required. Business or engineering degree preferred.
  
  
• Minimum three years of experience working for a manufacturer in the automotive market.
  
  
• Proven history of growing sales through effective key account management
  
  
• Must have the ability to build and execute strategies, as well as develop and close sales opportunities
  
  
• Ability to read and interpret engineering drawings.
  
  
• Understanding of basic financial principles surrounding ROI and quoting.
  
  
• Must have high energy and the ability to build and support a team atmosphere.
  
  
• Must have proven project management and organizational skills.
  
  
• Proven ability to multitask
  
  
• Excellent communication skills - both verbal and written
  
  
• Advanced Microsoft Office skills, especially Microsoft Excel and PowerPoint
  
  
• Highly organized and detail-oriented
  
  
• Must be willing to travel globally.
  
  
• Must have a valid driver's license, with an acceptable driving record, along with adequate insurance.
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Summary

Under the direction of the Vice President - Marketing, the Market Development Manager for Industrial Automation will lead strategic initiatives to expand HellermannTyton's presence in factory automation markets. This role focuses on identifying growth opportunities, developing go-to-market strategies, and driving the adoption of innovative cable management solutions for automated manufacturing environments. The position works independently and collaborates with multiple departments, including Sales, Marketing, Engineering, and Operations.

Essential Functions:

Market Strategy & Development

• 
  
  
• Define and execute industrial automation strategies, with emphasis on factory automation and cable management solutions.
  
  
• Conduct market assessments, identify high-growth segments, and develop actionable plans.
  
  
• Collaborate with Sales, Product Management, Engineering, and Marketing Communications to align strategies and resources.
  
  
• Partner with key commercial stakeholders to determine customer needs and lead the development of new products and marketing deliverables required to expand the company's market position.
  
  

Business Growth & Partnerships

• 
  
  
• Build relationships with OEMs, system integrators, and channel partners in the automation sectors.
  
  
• Develop strategic partnerships to penetrate new markets and expand share in existing ones.
  
  
• Participate in industry-related committees as applicable. Interpret code and industry changes and ensure HellermannTyton has the right specifications and products to enable new business.
  
  

Product Development Support

• 
  
  
• Work closely with Product Category Managers, Concept Team, and Engineering to set design, compliance, and performance specifications for new product developments in assigned markets.
  
  
• Provide market intelligence to guide product roadmap and ensure alignment with customer needs.
  
  

Sales Enablement & Execution

• 
  
  
• Support Key Account Managers and channel teams with technical expertise and market insights.
  
  
• Key contributor of new product launches, marketing deliverables, and deployment to the internal and external sales teams, channel, and key influencers in the market. Work closely with the marketing communications team to ensure deliverables further the company's brand equity and are created for maximum impact and results.
  
  
• Drive execution of cable management initiatives and other differentiated solutions for automation environments.
  
  

Performance Monitoring

• 
  
  
• Establish KPIs, track progress, and report quarterly on market penetration and revenue growth.
  
  
• Adjust strategies based on performance metrics and evolving market dynamics.
  
  
• Monitor and evaluate the competitive landscape in North America and globally. Develop deliverables and products to further differentiate HellermannTyton in the market.
  
  

Success in this role will require:

• 
  
  
• Ability to quickly and competently develop solutions-based differentiation models utilizing product, capability, corporate value, and market relationships.
  
  
• Ability to assess market needs and competition and develop a strategy that positions us as the market leader.
  
  
• History of creativity, innovation, inquisitiveness, and ethical behavior.
  
  
• Synthesize complex or diverse information. Collect and research data. Use intuition and experience to complement data.
  
  
• Proven experience in developing and executing business cases. Make sound decisions in new product and program development for profitable growth.
  
  
• Excellent skills in project organization, tracking, and communication of progress.
  
  

What You'll Bring

• 
  
  
• Bachelor's degree from a 4-year accredited college or university.
  
  
• 5+ years' experience in an industrial automation environment operating in a senior product management or market development role with a manufacturer.
  
  
• Strong project management, interpersonal, leadership, organizational and written/verbal communication skills required; ability to sell ideas and present strategies at an executive level.
  
  
• Excellent verbal and written skills. Proven ability to communicate value to different customer influencers - from the specifier to executive management
  
  
• Ability to travel up to 40% of the time.
  
  
• Must have a valid driver's license, with an acceptable driving record, along with adequate insurance
  
  

#LI-MS1 #LI-Hybrid

Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Troubleshooting, diagnosing and making recommendations for processing issues.
  
  
• Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons
  
  
• Regrind and scrap management
  
  
• Assistance with Automation alarms and troubleshooting
  
  
• Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed.
  
  
• Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations.
  
  
• Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis.
  
  
• Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
  
  

Other Functions

• 
  
  
• Other duties may be assigned.
  
  
• Evaluate current state processing conditions and recommend improvement plans as needed.
  
  
• Developing procedures for production related duties that may be used as reference/training materials.
  
  
• Work on audit preparedness for both internal and external audits.
  
  
• Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions.
  
  

Success in this role will require

• 
  
  
• Must have strong troubleshooting skills
  
  
• Ability to communicate with all levels of the organization.
  
  
• Must be detail orientated.
  
  
• Proven ability to work independently or within a team.
  
  
• Strong computer skills.
  
  
• Extensive knowledge of scientific injection molding principles and techniques.
  
  
• Extensive knowledge of DOE principles and techniques.
  
  
• Proven ability to prioritize and multi task.
  
  

What You'll Bring

• 
  
  
• High school diploma or equivalency, required.
  
  
• 3+ years experience as a Process Technician preferred.
  
  
• Must have demonstrated time management skills.
  
  
• Strong communication and interpersonal skills.
  
  
• Excellent mechanical skills required.
  
  
• Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours.
  
  
• Must be able to stand. Walk, and work for up to 12-hour shifts.
  
  
• Excellent troubleshooting skills required.
  
  
• Knowledge of SPC principles.
  
  
• Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred
  
  

Rev. 6.17.2025

#LI-KN1 #LI-Onsite

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Title: Tooling Engineer

Reports to: Tooling Manager

Department: Tooling Engineering

Job Summary:

Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Writing purchase orders stating mold building specifications.
  
  
• Writing requests for quotations for vendors.
  
  
• Assure that vendors keep within budget and timing constraints on projects.
  
  
• Evaluate and Approve injection molding tool design.
  
  
• Assure that vendors incorporate the approved design in injection molding tool construction.
  
  
• Keep a library of tool drawings.
  
  
• Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
  
  
• Evaluate product design as to moldability and simplification for moldability.
  
  
• Assist in troubleshooting injection molding problems.
  
  
• Work with injection molding tool designs to assure the highest quality molding tools possible.
  
  
• Work with toolmakers to assure the highest quality injection molding tools possible.
  
  

Other duties assigned:

• 
  
  
• Other duties as assigned.
  
  

Qualifications:

• 
  
  
• High school diploma or equivalent.
  
  
• Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
  
  
• Prior experience with plastic injection molding process.
  
  
• Knowledge of injection molding tools and injection molding tool construction.
  
  
• Knowledge of machine tools and how machine tools relate to injection mold tool construction.
  
  
• Knowledge of manufacturing best practices.
  
  
• Excellent computer skills, including Microsoft software and CAD software.
  
  
• Organized; can meet deadlines.
  
  
• Ability to work non-standard hours to meet the needs of the customers.
  
  
• Ability to travel internationally.
  
  
• Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
  
  

#LI-KN1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.