Engineering Jobs in Danbury Connecticut Remote

This position is for the Overnight Shift 2am - 1030am Monday to Friday

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets.  This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet.

Advanced Diagnostics & Complex Repairs

• Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:
• Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems).
• CAN-bus and multiplex electrical systems, electronic control modules, and communication networks.
• Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs.
• Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds.

Technical Leadership & Training

• Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks.
• Assist in training on:
  • Diagnostic software and tools.
  • New equipment technology, safety systems, and telematics.
  • Company maintenance standards, PM strategies, and repair procedures.

Fleet Reliability, Compliance & Continuous Improvement

• Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications.
• Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT.
• Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC).

Operational & Customer Support

• Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area.
• Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets.
• Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety.

Administrative & Leadership Duties (as assigned)

• Help plan daily shop workload and allocate jobs according to technician skill level.
• Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts.
• Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop.

• High school diploma or GED required; additional technical training strongly preferred.

• A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul.
• CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads.

• Demonstrated expert-level knowledge of:
  • Heavy truck and refuse systems.
  • Refuse hydraulic, electrical, and powertrain systems.
  • Diagnostic software, scan tools, and OEM service information.
• Proven track record of performing complex diagnostics and repairs independently.
• Must provide own professional-grade tools required for diagnostic and repair work.
• ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred.
• Possession of a valid driver’s license is required.
• Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred.
• Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred.
• Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

LOCATION Ridgefield, CT

JOB TYPE Full-Time, On-Site

COMPANY DESCRIPTION

Vibrant Building Technologies is building the next generation of home health technology — hardware and software designed to actively manage the environment people live in.

Our first product is an intelligent HVAC platform. We are transitioning from product development into manufacturing and building the operational foundation to produce our systems at scale. Our commitment is to American manufacturing and uncompromising product quality.

ROLE DESCRIPTION

We are looking for a Head of Manufacturing & Test Operations to build Vibrant's manufacturing organization from the ground up. This role is full-time and on-site in Ridgefield, CT.

This is not a maintenance role inside an established factory. This is a 0 to 1 build.

You will design the production floor, implement manufacturing systems, develop testing infrastructure, and establish the quality processes that ensure every system leaving the facility performs reliably in the field. You will work directly with executive leadership to define how our products are built, tested, and delivered.

The right person is both strategic and hands-on — comfortable defining manufacturing architecture and stepping onto the floor to debug hardware and solve problems. Your work will directly determine Vibrant's ability to scale.

RESPONSIBILITIES

Manufacturing System Architecture

• Design and build Vibrant's manufacturing operations from the ground up
• Define production line architecture, workstation layouts, and assembly flow
• Establish SOPs, assembly instructions, and process controls
• Implement systems for inventory, traceability, and production tracking

Production Operations

• Own throughput, yield, and reliability across all manufacturing lines
• Launch and stabilize new production stations and assembly processes
• Identify and eliminate bottlenecks affecting cycle time and output
• Drive continuous improvement across efficiency and cost structure

Test Infrastructure & QA

• Design and deploy production testing infrastructure for every manufactured unit
• Develop automated and manual test procedures to validate system performance
• Establish root cause analysis processes for production failures and field returns
• Partner with engineering on validation testing and product verification

Supply Chain & Component Quality

• Manage vendor performance and component quality with supply chain leadership
• Establish incoming quality control processes for critical components
• Maintain feedback loops between production, suppliers, and product development

Team Building & Leadership

• Recruit, train, and develop Vibrant's early manufacturing team
• Build a culture of ownership, accountability, and operational excellence
• Serve as the escalation point for all manufacturing and quality issues

Cross-Functional Execution

• Close feedback loops between design and production with hardware, firmware, and software teams
• Support prototype builds, pilot runs, and engineering validation cycles
• Partner with executive leadership on scaling strategy and facility expansion

WHAT SUCCESS LOOKS LIKE — FIRST 12 TO 18 MONTHS

• A stable, repeatable manufacturing line running at consistent throughput
• Production testing infrastructure validating every unit before shipment
• QA processes that significantly reduce field failures and service escalations
• Throughput increased without sacrificing quality
• Operational foundation in place to scale production significantly
• A high-ownership manufacturing team performing at a high level

YOU MIGHT BE A FIT IF

• You enjoy building systems from scratch rather than maintaining existing ones
• You have taken a hardware product from prototype into real production and understand what scaling physical products actually requires
• You move comfortably between strategic planning and hands-on execution — process design, production debugging, test fixture improvement
• You believe great manufacturing leaders belong on the production floor
• You are motivated by ownership and want to directly shape how a company builds and delivers its products
• You are energized by environments where the playbook is still being written
• You take pride in eliminating operational chaos through durable systems, not constant firefighting

You will likely thrive here if you are the type of person who looks at an empty production floor and immediately starts thinking about the systems, processes, and team required to bring it to life.

QUALIFICATIONS

Required:

• 5+ years in manufacturing, production engineering, or industrial engineering
• Experience scaling hardware production in fast-moving environments
• Strong technical understanding of electromechanical systems
• Able to operate across strategy and execution — from system design to shop floor
• Track record of building durable processes, not just solving immediate fires

Strongly Preferred:

• Experience at an early-stage hardware company
• Background designing production test systems for complex hardware
• Familiarity with HVAC or similar electromechanical products
• Experience with MES or manufacturing analytics systems

Title: Sr. Manufacturing Engineer (NPI)

Location: Greater Bethel Area, CT (100% Onsite)

Employment Type: Direct Hire

Status: Accepting Candidates

About the role

Seeking a Senior Manufacturing Engineer to support New Product Introduction (NPI) initiatives within a regulated medical device manufacturing environment. This role focuses on engineering scalable manufacturing processes, supporting product launches, and leading validation activities to ensure production readiness.

Key Responsibilities

• Serve as Manufacturing Engineering lead on NPI programs from concept through production transfer.
• Design and optimize scalable manufacturing processes, tooling, and fixtures.
• Program and troubleshoot CNC machining operations (Milling, Multi-Axis, Wire EDM).
• Lead IQ/OQ/PQ validation, TMV studies, and equipment commissioning activities.
• Create and maintain manufacturing documentation in compliance with ISO 13485 and internal QMS.
• Drive continuous improvement initiatives to enhance quality, safety, and efficiency.

Qualifications

• 5+ years of Manufacturing Engineering experience (flexible to 3–4 years).
• Hands-on experience with IQ/OQ/PQ validation in regulated manufacturing.
• Strong exposure to CNC programming (G-code/M-code preferred).
• Experience supporting high-volume manufacturing processes.
• Knowledge of ISO 13485 and structured QMS environments.
• Must be able to work onsite 100%.

JOB SUMMARY

The Engineering Intern will have the opportunity to drive a Research & Development Project, to be decided by the Engineering Manager. The ideal candidate will think logically and enjoy solving problems with creativity, diligence, and achievement. Arcmed offers a great work environment, professional development, challenging careers, and competitive compensation packages.

Our Strategy and Purpose

• We provide technology and supply chain solutions for the design and manufacture of precise fluid handling components for diagnostic and analytical instruments.
• We improve patient outcomes by helping solve the world’s toughest diagnostic and analytical challenges.
• We will be the recognized leader in helping engineers, scientists, and doctors to solve the world’s toughest diagnostic and analytical challenges.
• We always act with intention and drive to achieve our purpose.
• Teamwork, collaboration, and diverse opinions make us stronger.
• We are unafraid to make timely decisions, and we empower our people to make decisions, execute them, and move forward.
• We value people and take the initiative and hold themselves accountable.
• Challenging the status quo helps us grow. Look for and call out improvements.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Modify and improve critical components and program PLC for draw down process upgrades.
• Collaborate with the manifold team to assist with design, programming, and fabrication of CNC-milled components for diffusion bonding.
• Study the existing products to gain an understanding of how Arcmed supports industry.
• Work with internal stakeholders to determine areas of improvement.
• Merge the functional intent of the product with various upgrades to create a project proposal.
• Drive project proposal to a Go/No-Go decision.
• Deliver final presentation to Board of Directors outlining project efforts, results, and lessons learned.

Health & Safety:

• Report and take required action regarding injuries, incidents, medical, and accidents required by policy.
• Make the health, safety, protection of rights, and the development of all employees your primary responsibilities.
• Effectively manage medical and first aid emergencies.
• Follow all agency safety/medical-related policies and procedures.
• Follow fire evacuation and disaster procedures correctly and on time.
• Report unsafe situations immediately; ensuring safety is imperative.
• Ensure pertinent emergency telephone numbers are readily available.
• Report symptoms and signs of communicable diseases immediately.
• Consistently use universal precautions.
• Report any incident that could potentially result in negative reactions from the community, law enforcement officers, and other agencies to the supervisor immediately.

EDUCATIONAL REQUIREMENTS, QUALIFICATIONS, and TRAININGS

• Currently enrolled in an Engineering program.
• Engineering degree, Mechanical or Electrical preferred.
• Recommended to be a Junior or Senior with experience in Product Design and Manufacturing.
• Interpersonal skills.

COMPUTER AND SOFTWARE REQUIREMENTS

• Microsoft: Office 365; SharePoint; Teams; Visio; and OneNote preferred.
• Experience with CAD software (preferably SolidWorks)
• Ability to operate media equipment such as tablets, smartphones, and other electronic equipment.
• Ability to work with general office equipment.
• Ability to work with and understand databases is a must, and the ability to learn technical skills.

PHYSICAL REQUIREMENTS & WORK ENVIRONMENT

• Shall have essential physical skills; be able to run, squat, stoop/bend, kneel, climb stairs, and lift at least 50 pounds (or ¼ own body weight).
• Shall have adequate vision, reading, writing, and documentation skills, and hearing to perform the essential functions of the job.
• Must have enough endurance to perform tasks over long periods of time.
• Will be engaged in speaking, sitting, walking, driving, listening, and in communicating both orally and in writing while performing his or her duties.
• Must be able to listen and respond to questions and instructions.

The qualifications, physical demands, and work environment described herein are representative of those an employee will encounter and must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Arcmed is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

The above-noted job description is not intended to describe in detail the variety of tasks that may be assigned, but rather to give the incumbent a general sense of the responsibilities and expectations of their position. As the nature of business demands change, so, too, may the essential functions of this position.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.

Location Details: United States - Remote

At GoDaddy the future of work looks different for each team. Some teams work in the office full-events or offsites. This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or offsites.

This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.

GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.

Join our team 

Do you want to be an Information Security Leader at GoDaddy? GoDaddy's Product Security group is looking for a Principal Security Engineer to join our organization. Can you solve large scale and cross-company issues, while ensuring that partnership with the development and operational communities remains in front of mind?

GoDaddy is looking for a Principal Security Engineer to apply their hands-on technical skills, strong leadership abilities, and an eagerness to design solutions to complex problems. You must be comfortable with communicating to stakeholders, performing security assessments and prioritizing security risks, creating/presenting high-quality deliverables.

What you'll get to do...

• Identify security threats in applications and infrastructure and provide remediation mentorship to system owners.
• Join forces with SRE and development teams to find new and creative ways to reduce the occurrence of vulnerabilities at scale.
• Build repeatable/reusable security processes and frameworks.
• Review quality issues and work towards detecting security flaws both obvious and discrete.
• Assist with scoping prospective projects, participating in projects from kickoff through "definition of done" via end-to-end ownership.
• Use your industry experience to own and drive resolution and retest complex security events, policy questions and technical security risks.

Your experience should include...

• 7+ years of progressive security engineering experience across Security Architecture, Cryptography, Network, Cloud, Mobile, and Web Security.
• Skilled in Secure Development Lifecycle, Security by Design, and Shift Left methodologies.
• Proficient in Threat Modeling, Architecture Review, Penetration Testing, Code Review, SAST, and DAST.
• Strong scripting abilities in languages such as Python, C, C++, Java, Ruby, and PowerShell.
• Adept at applying security best practices for compliance, with excellent problem-solving and communication skills.

You might also have...

• Bachelor's degree in computer science or related field.
• Master's degree or PhD in Computer Science or related field.
• Hosting industry and/or cloud Experience.
• Experience in hardware security.

We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.

We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way. 

About us...  GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunity more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us. 

At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere, and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report which can be found on our Diversity Careers page.

GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.

Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to  

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.