Engineering Jobs in Chester Delaware County Pa Remote

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

• Diagnostics & Repair

  • Independently diagnose and repair:
    • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
    • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
    • Air and hydraulic brake systems, ABS, and suspension components.
    • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
    • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

   

  Preventive Maintenance & Compliance

  • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
  • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
  • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

   

  Road Calls & Operational Support

  • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
  • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

   

  Mentorship, Training & Documentation

  • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
  • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
  • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

JOB DESCRIPTION

Insight Global is assisting a signal processing and optical telecommunications client of ours in identifying an Embedded Software Development Engineer for a direct-hire opening. The Embedded Software Development Engineer designs, implements, and tests embedded software features running on both in-house developed and commercial hardware platforms.

• Design, develop, test, and maintain embedded software for optical telecommunications equipment.
• Develop software in C/C++ for embedded Linux SoC systems and microprocessors.
• Collaborate closely with hardware design engineers to support rapid embedded software development: Provide software input during schematic design reviews and assist with board bring-up, debugging, and validation.
• Support the production team with software testing and production workflows
• Provide customer technical support, including bug fixes and implementation of new software features
• Recreate customer-reported issues and test scenarios using optical laboratory test equipment
• Participate in project planning, task estimation, and schedule development
• Contribute to system-level design and embedded software architecture

REQUIRED SKILLS AND EXPERIENCE

• Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or equivalent experience
• Strong proficiency in embedded C
• 3-5 years in embedded software engineering
• Experience leading software engineering projects (project management experience)
• Experience developing software for embedded Linux systems
• Ability to debug software at the Linux and embedded system level
• Understanding of electronic hardware fundamentals
• Experience using laboratory test equipment, such as multimeters, oscilloscopes, logic analyzers, and JTAG tools
• Familiarity with scripting languages, such as Python, and Linux command line tools, including bash scripting

NICE TO HAVE SKILLS AND EXPERIENCE

• Working knowledge of C++
• Familiarity with ARM and/or MIPS processor architectures
• Experience with SDK design, gRPC, protobuf, or similar communication

You're not the person who will settle for just any role. Neither are we. Because we're out to create Better Care for a Better World, and that takes a certain kind of person and teams who care about making a difference. Here, you'll bring your professional expertise, talent, and drive to building and managing our portfolio of iconic, ground-breaking brands. In this role, you'll help us deliver better care for billions of people around the world. It starts with YOU.

We are currently seeking a Lead Electrical Engineer – Converting, at our Chester Plant. Electrical Engineers at Kimberly-Clark initiate, design, develop, optimize and problem solve manufacturing and supporting processes. Recognized for understanding the application of technology and demonstrates the ability to interface with team members. Our engineers can identify and resolve process and equipment problems, initiate creative and practical designs which meet safety and production expectations, implement engineering and scientific analysis principles, apply engineering standards and procedures, and document work to ensure information is retrievable.

In this role, you will:

• Provide engineering support and technical guidance on resolution of process and equipment problems and any safety improvement initiative
• Initiate, design, develop, and optimize engineering solutions which meet/exceed mill expectations
• Provide guidance and support on process and qualification trials and manage engineering change for trial requests
• Provide coaching and development to team members
• Utilize lean production management techniques to design and develop improvements to the manufacturing process
• Communicate project deliverables and expectations effectively to team members
• Develop broadening mastery in technical areas important to the organization
• Document work to ensure knowledge is preserved and protected
• Facilitate work in accordance with K-C's Ways of Working

About Us

Huggies. Kleenex. Cottonelle. Scott. Kotex. Poise. Depend. Kimberly-Clark Professional. You already know our legendary brands—and so does the rest of the world. In fact, millions of people use Kimberly-Clark products every day. We know these amazing Kimberly-Clark products wouldn't exist without talented professionals, like you.

At Kimberly-Clark, you'll be part of the best team committed to driving innovation, growth and impact. We're founded on more than 150 years of market leadership, and we're always looking for new and better ways to perform – so there's your open door of opportunity. It's all here for you at Kimberly-Clark.

Led by Purpose. Driven by You.

About You

You perform at the highest level possible, and you appreciate a performance culture fueled by authentic caring. You want to be part of a company actively dedicated to sustainability, inclusion, wellbeing, and career development.

You love what you do, especially when the work you do makes a difference. At Kimberly-Clark, we're constantly exploring new ideas on how, when, and where we can best achieve results. When you join our team, you'll experience Flex That Works: flexible (hybrid) work arrangements that empower you to have purposeful time in the office and partner with your leader to make flexibility work for both you and the business.

In one of our professional roles, you'll focus on winning with consumers and the market, while putting safety, mutual respect, and human dignity at the center. To succeed in this role, you will need the following qualifications:

• Bachelor's in a related engineering discipline such as Electrical Engineering; and minimum of 5+ years of relevant engineering experience in technical or operational assignments.
• Experience with manufacturing control systems, such as: PLCs (Programmable Logic Controllers); variable speed motor drives; Motion Control (Servos); HMI (Human Machine Interfaces); distributed control systems; instrumentation; power distribution; machine safety systems.
• Expertise in Electrical Engineering with a demonstrated ability to translate that knowledge into execution of process and capacity improvements in capital or expense projects.
• Experience working with external technical service providers (TSP).
• Specification development, design review, checkout, and start up for projects
• Problem identification, problem solving methodology. Lean Six Sigma and/or Continuous Improvement experience is desirable.

Total Benefits

Here are just a few of the benefits you'd enjoy working in this role for Kimberly-Clark. For a complete overview, see support for good health with medical, dental, and vision coverage options with no waiting periods or pre-existing condition restrictions. Access to an on-site fitness center, occupational health nurse, and allowances for high-quality safety equipment.

Flexible Savings and spending accounts to maximize health care options and stretch dollars when caring for yourself or dependents.

Diverse income protection insurance options to protect yourself and your family in case of illness, injury, or other unexpected events.

Additional programs and support to continue your education, adopt a child, relocate, or even find temporary childcare.

To Be Considered

Click the Apply button and complete the online application process. A member of our recruiting team will review your application and follow up if you seem like a great fit for this role.

In the meantime, please check out the careers website.

And finally, the fine print....

For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world, which is why we seek to build a workforce that encompasses the experiences of our consumers. When you bring your original thinking to Kimberly-Clark, you fuel the continued success of our enterprise. We are a committed equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, age, pregnancy, genetic information, citizenship status, or any other characteristic protected by law.

The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position.

Employment is subject to verification of pre-screening tests, which may include drug screening, background check, and DMV check.

Veterans and members of the Reserve and Guard are highly encouraged to apply.

This role is available for local candidates already authorized to work in the role's country only.

Grade 10/P2: Grade level and / or compensation may vary based on location/country

Salary Range: 94,080 – 116,240 USD

At Kimberly-Clark, pay is just one aspect of our total rewards package, which also includes a variety of benefits and opportunities to achieve, thrive and grow. Along with base pay, this position offers eligibility for a target bonus and a comprehensive benefits suite, including our 401(k) and Profit Sharing plan. The anticipated base pay range for this role is provided above for a fully qualified hire. Actual pay will depend on several factors, such as location, role, skills, performance, and experience. Please note that the stated pay range applies to US locations only.

Middleware Engineer

Contract to hire

Hybrid (2-3 days onsite)– Newtown Square, PA

The candidate will be a team player in a technology organization responsible for Middleware Infrastructure environment. The organization consists of highly trained system engineers and administrators, whose responsibilities include sustaining, engineering and production support of our Middleware environments. At client, Middleware technologies include OpenShift, Kubernetes, containers, Kafka, Apigee, IBM ESB, IBM MQ, Java, Tomcat, Apache, IIS etc.

Key Responsibilities:

• Manage Middleware products/environments including new installations, upgrades, maintenance and tuning, monitoring and capacity planning.
• Provide system/technical expertise while managing application deployments and troubleshooting application and platform issues.
• Participate in 24x7 rotational On-Call production Middleware Infrastructure administration support for business-critical applications.
• Design, build and manage OpenShift clusters across Development, test and production environments.
• Develop and implement CI/CD pipelines leveraging Jenkins, Git or similar
• Manage and optimize Kubernetes/OpenShift resources, Pods,Services,Routes,operators,Helm Charts etc.)
• Review system logs on critical servers regularly and address system generated errors and warnings immediately to ensure minimum downtimes and disruption to users
• Expertise in reviewing, implementing and supporting Enterprise Security solutions including Web Service Security, SSL Mutual Authentication, SSL certificate management.
• Expertise in Various middleware technologies including Apache, application and web servers, Expertise in administering and architecture of IBM MQ environments, Kafka, Apigee including deployment, upgrades, configurations, setup, performance tuning.
• Regularly review security patches on all servers and install the latest security patches/service packs periodically.

Required Qualifications:

• Bachelor’s degree in computer science , Information Technology with equivalent experience.
• At least ten(10) years of experience of overall support of Middleware Technologies and Infrastructure.
• 5-7 + years’ experience in containerization and Orchestration (Kubernetes, docker Etc.)
• Experience with Kubernetes concepts (pods, deployments, namespaces, RBAC, networking)
• Assist in updating documented guidelines and procedures for the IT-Infrastructure unit and ensure that the documentation reflects any/all procedural changes.
• Perform system health checks of core infrastructure systems as needed.
• Integrate proactive monitoring, logging and alerting using enterprise monitoring tools.
• Must be a self-starter with the ability to work independently and in a collaborative team environment.
• Extensive experience and skill in the use of scripting (bash, python, PowerShell) to report on systems and automate processes.
• Participate in planning, testing and implementation of disaster recovery plans at the Primary and Secondary Disaster Recovery site.
• Certifications are preferred (i.e. Redhat OpenShift/Kubernetes certification,)

Company Description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

Night Shift hours (4:30p - 1:00a)

Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required.

• Maintains quality and tolerances within .0003”.
• Follow written and verbal procedures for machining and other duties.
• Work from work order routings, prints, sketches, layout sheets, written and verbal instructions.
• Working knowledge of programming languages and the ability to learn / adapt per machine.
• Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor’s instructions.
• Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc.
• Presets tools and may be required to re-sharpen.
• Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications.
• Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor.
• Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor.
• Make proper labor and time reports.
• Perform other duties as required.
• Keep machine(s) / work area clean and orderly.
• Perform additional duties and responsibilities based upon individual branch requirements.
• Additional duties as assigned.

Qualifications

• High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent.
• Minimum 3 years of CNC machine tool Programming & Operating experience.
• Numerical control machining skills experience and ability to read and interpret work related machine drawings.
• Make average to complicated mathematical calculations and resolve elementary technical problems.
• CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency.
• Can operate a minimum of 2 CNC machine tools.
• Possesses previous experience as a Manual machinist.
• Must be detail oriented; be able to work independently using sound judgment.
• Good verbal, written, problem solving and organization skills required.
• Capable of handling multiple priorities.
• Ability to complete tasks in a timely and efficient manner.

Pay Range: $27.00 - $30.00 hr.

Position offers an additional $2.00 Shift Differential.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms