Engineering Jobs in Carson California Wfh Remote
287 positions found
As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.
The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.
The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.
As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.
The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.
Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.
Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
Ability to provide project management reports as required, support senior level and customer reviews as necessary.
Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
Ability to participate or lead in the product development process including design reviews.
5 to 10% Travel required.
Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.
Viewed as an expert and/or resource within the field by peers in and outside the organization.
Bachelor’s Degree and a minimum of 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, a minimum of 13 years of prior related experience.
Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
6 years’ strong experience with receiver, Antenna, or Radio design (i.e.
RF).
4 years’ experience with embedded Hardware design.
2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills: Strong familiarity with GPS Module design and topology.
Advanced with High-speed Analog design methodologies.
Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
Familiar with FPGA design methodologies.
Proficient with DO-254 design.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.
The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
TRAVEL: At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact peoples lives around the world today, and for generations to come. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We’re looking for innovators, who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we will support yours of expanding your personal network and developing skills, whether you are new to the field or an industry thought-leader. Networking Technology Professionals, We Want You!
The Northrop Grumman Classified Solutions team is seeking a highly experienced Senior Network Administrator to join its dynamic team of technical professionals. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. Applicants are encouraged to apply, only if they are willing to work on-site.
Maintain smooth operation of classified networks - LAN/WAN environments.
Plan, design, configure, and install network hardware in support of customer requirements.
Maintain technical expertise in all areas of networks and computer hardware / software interconnection, as well as interfaces, including routers, multiplexers, firewalls, switches, gateways, etc.
Create and ensure that appropriate network documentation exists, including operational instructions.
Provide regular monitoring, and network analysis, regarding short and long-range planning for [in-house] systems. May coordinate third-party maintenance for network equipment.
Design networks, or portions of networks, including the selection of hardware and software packages.
May coordinate third-party maintenance for network equipment.
Represent the organization in providing solutions to difficult technical issues associated with specific projects.
The successful applicant will demonstrate the ability to work in a team environment with engineering users, other network administrators, systems administrators, and computer/facility organizations.
Plan, manage and implement complex network designs in support of customer requirements.
Support network teams in project designs to clarify project requirements, provide design solutions, in accordance with standards.
Perform troubleshooting analysis of network infrastructure and associated systems.
Document network hardware and software technology components.
Implement and troubleshoot LAN technologies such as VLANs, trunking (port tagging), spanning-tree and protocols.
Provide third-level support and troubleshooting of network problems.
On occasion may provide after-hours and weekend support.
Interface regularly with customers and manage customer installation timelines and deliverables to help facilitate successful deployments.
Experience with HAIPE/TACLANE and other military COMSEC/CRYPTO equipment and procedures.
Experience in the use of network analysis tools (i.e. Experience with Microsoft Office, Visio, Project, PowerPoint and Excel is required
Lift equipment weighing up to 40 pounds as needed
Ability to work after hours, and weekends as needed
OR a Bachelors Degree with 8 years of experience; OR a High School Diploma (or equivalent) with 12 years of IT experience is required
Must have a DOD 8570 IAT level 2 baseline certification (example: Candidates must have a current and fully adjudicated DOD Top Secret level security clearance (at a minimum) in order to be considered
Candidates must have the ability to obtain, and maintain, a Top Secret/SCI level security clearance as a condition of employment
Experience designing and maintaining LAN & WAN based networks, managing routing protocols on large LAN environments, and experience with Cisco hardware (routers, switches, and firewalls)
Bachelor’s degree Network Engineering
Active Top Secret/SCI, Polygraph, or SAP/SAR access would be nice to have
Network+ certification and/or either a CCNP or a CCIE certification
Network design, analysis, and administration of routers, switches, hubs, and firewalls
Experience in the use of network analysis tools (i.e. Previous experience troubleshooting network procedures and best practices; experience with network challenges associated with systems integration, including COTS integration, capacity analysis and system architecture design
We offer flexible work arrangements, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
TRAVEL: At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact peoples lives around the world today, and for generations to come. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We’re looking for innovators, who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we will support yours of expanding your personal network and developing skills, whether you are new to the field or an industry thought-leader. Networking Technology Professionals, We Want You!
The Northrop Grumman Classified Solutions team is seeking a highly experienced Senior Network Administrator to join its dynamic team of technical professionals. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. Applicants are encouraged to apply, only if they are willing to work on-site.
Maintain smooth operation of classified networks - LAN/WAN environments.
Plan, design, configure, and install network hardware in support of customer requirements.
Maintain technical expertise in all areas of networks and computer hardware / software interconnection, as well as interfaces, including routers, multiplexers, firewalls, switches, gateways, etc.
Create and ensure that appropriate network documentation exists, including operational instructions.
Provide regular monitoring, and network analysis, regarding short and long-range planning for [in-house] systems. May coordinate third-party maintenance for network equipment.
Design networks, or portions of networks, including the selection of hardware and software packages.
May coordinate third-party maintenance for network equipment.
Represent the organization in providing solutions to difficult technical issues associated with specific projects.
The successful applicant will demonstrate the ability to work in a team environment with engineering users, other network administrators, systems administrators, and computer/facility organizations.
Plan, manage and implement complex network designs in support of customer requirements.
Support network teams in project designs to clarify project requirements, provide design solutions, in accordance with standards.
Perform troubleshooting analysis of network infrastructure and associated systems.
Document network hardware and software technology components.
Implement and troubleshoot LAN technologies such as VLANs, trunking (port tagging), spanning-tree and protocols.
Provide third-level support and troubleshooting of network problems.
On occasion may provide after-hours and weekend support.
Interface regularly with customers and manage customer installation timelines and deliverables to help facilitate successful deployments.
Experience with HAIPE/TACLANE and other military COMSEC/CRYPTO equipment and procedures.
Experience in the use of network analysis tools (i.e. Experience with Microsoft Office, Visio, Project, PowerPoint and Excel is required
Lift equipment weighing up to 40 pounds as needed
Ability to work after hours, and weekends as needed
OR a Bachelors Degree with 8 years of experience; OR a High School Diploma (or equivalent) with 12 years of IT experience is required
Must have a DOD 8570 IAT level 2 baseline certification (example: Candidates must have a current and fully adjudicated DOD Top Secret level security clearance (at a minimum) in order to be considered
Candidates must have the ability to obtain, and maintain, a Top Secret/SCI level security clearance as a condition of employment
Experience designing and maintaining LAN & WAN based networks, managing routing protocols on large LAN environments, and experience with Cisco hardware (routers, switches, and firewalls)
Bachelor’s degree Network Engineering
Active Top Secret/SCI, Polygraph, or SAP/SAR access would be nice to have
Network+ certification and/or either a CCNP or a CCIE certification
Network design, analysis, and administration of routers, switches, hubs, and firewalls
Experience in the use of network analysis tools (i.e. Previous experience troubleshooting network procedures and best practices; experience with network challenges associated with systems integration, including COTS integration, capacity analysis and system architecture design
We offer flexible work arrangements, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
- Seeking an experienced Associate Principal to lead and design scalable technical architectures with expertise in Architecture Patterns SOA and Microservices
- Design and develop comprehensive architectural diagrams to guide system development and integration Apply advanced Architecture Patterns and Styles to create scalable reliable and maintainable solutions.
- Lead the design and implementation of SOA and Microservicesbased architectures to support business agility
- Collaborate with cross-functional teams to align technical architectures with business goals and requirements
- Evaluate emerging technologies and recommend architectural improvements to enhance system performance and scalability
- Ensure adherence to architectural standards and best practices across projects.
- Mentor and guide technical teams on architecture principles and design methodologies
Roles and Responsibilities
- Drive the architectural strategy and vision for complex enterprise solutions within the Technical Architecture family
- Develop and maintain architectural frameworks and governance to ensure consistency across projects
- Conduct architectural reviews and provide expert guidance to development teams
- Facilitate communication between stakeholders, including business development and operations teams. Identify risks and propose mitigation strategies related to architectural decisions
- Lead innovation initiatives by exploring new architectural styles and patterns
- Provide leadership in troubleshooting and resolving complex architectural issues
- Support the professional growth of team members through coaching and knowledge sharing
Mandatory Skills :
- Architecture Patterns and Styles
- Microservices Architecture
- Architectural diagrams
- SOA and Microservices-Based Architecture
- Software Engineering and Design Architecture
- CI/CD Architecture
- Service-Oriented Architecture
- Architectural Patterns
DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our shipping department for a Warehouse Associate.
- Pay rate: $18/hr
- Location: onsite in Carson, CA
Job Summary: We are seeking a reliable and dedicated Warehouse Associate to join our Shipping Department team. As a Warehouse Associate, you will play a crucial role in ensuring the efficient and accurate processing of outgoing orders and shipments. Your attention to detail, strong organizational skills, and commitment to teamwork will contribute to the success of our shipping operations.
Key Responsibilities:
- Prepare and pack orders for shipment, ensuring accuracy and completeness of items.
- Utilize shipping software and equipment to generate shipping labels, packing slips, and other required documentation.
- Conduct quality checks on outgoing orders to ensure they meet company standards.
- Collaborate with other team members to prioritize orders and shipments based on deadlines and customer requirements.
- Operate forklifts and other warehouse equipment safely and efficiently.
- Maintain a clean and organized work area, following company guidelines for warehouse organization.
- Assist in receiving and inspecting incoming shipments when necessary.
- Communicate effectively with the team and supervisors, providing updates on order status and potential issues.
Qualifications:
- High school diploma or equivalent.
- Previous experience in a warehouse or shipping environment preferred, but not required.
- Forklift certification is a plus.
- Ability to lift and move packages (up to 50 pounds).
- Strong attention to detail and accuracy.
- Basic computer skills, including experience with shipping software.
- Excellent communication and teamwork skills.
- Willingness to learn and adapt to changing tasks and priorities.
- Ability to work in a fast-paced and physically demanding environment.
- Reliable and punctual with a strong work ethic.
We provide a comprehensive benefits package, including health insurance, a profit-sharing plan, paid time off, and more.
Company Description
DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.
Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.
DMF Lighting is proud to be an Equal Opportunity Employer.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.
Company Benefits:
- 13 paid holidays
- Vacation and sick pay
- PPE provided along with annual allowance for boots and prescription safety glasses
- Work shirts provided by company
- Annual appreciation package
- Early performance evaluation opportunities
- Competitive benefits (medical/dental/vision)
- 401k + match
- Company paid life insurance and disability
- Employee assistance program
- Career development opportunities
Responsibilities:
- Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
- Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
- Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
- Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
- Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
- Preparing progress reports and issuing reports to clients as necessary.
Qualifications:
- Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
- Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
- 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
- Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
- Coaching, mentoring, and teaching project teams.
- Advanced financial management and forecasting experience.
- Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
- Exceptional planning and organizing skills with the ability to manage a number of projects
Company Profile:
CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.
CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
