Wired Controller Not Connecting Switch Jobs in Usa

Job Title: Electrical Engineer (E3S / Cable Design)

Location: Santa Clara, CA (Onsite)

Experience: 6+ Years

We are looking for an Electrical Engineer with strong E3S and cable design experience to support controller builds and electrical documentation.

Key Responsibilities:

Develop electrical schematics, wiring diagrams, and harness layouts using E3S

Design cables & harnesses (connector selection, wire sizing, routing)

Create fabrication documents: cable charts, wire lists, build instructions

Support controller build activities (wiring, routing, termination, testing)

Work with mechanical teams for electromechanical integration

Troubleshoot wiring issues during prototype/production builds

Maintain documentation and revision control in PLM / ERP systems

Required Skills:

E3S (Electrical Schematic Design)

Cable & Harness Design

Controller Build & Electrical Fabrication

Wiring Diagrams & Electrical Documentation

Plant Design Engineering – Electrical

As a world leader in sensing and control technology, Nidec Mobility controls the most discrete functions within an automobile – from seat switches, power window switches, and instrument panel controls, towards complex user interfaces. NMOA is directly involved with automotive OEM’s and holds a leadership position within Nidec for product development with global vehicle makers.

The Test Systems Technician is responsible for hands on assembly, wiring, integration, and validation of automated test equipment and custom test systems. This role requires strong practical electrical and mechanical skills, the ability to read and interpret electrical schematics, and experience building complex tester platforms from concept through deployment.

Key Responsibilities

• Assemble automated test systems, electrical panels, and custom tester platforms from engineering drawings and schematics

• Perform point to point wiring of control panels, power distribution systems, instrumentation, and data acquisition hardware

• Route and terminate cables including power, signal, communication, and high voltage wiring

• Read, interpret, and troubleshoot using electrical schematics, wiring diagrams, and layout drawings

• Integrate hardware components such as power supplies, PLCs, relays, breakers, DAQ systems, and network equipment

• Perform continuity checks, insulation resistance testing, and basic electrical verification

• Support system bring up, debugging, and validation alongside engineering teams

• Identify wiring errors, component mismatches, and layout improvements during assembly

• Maintain accurate build documentation and redline drawings as required

• Follow all electrical safety standards and company procedures

Please directly apply or email resume to

NO SOLICITING FROM RECRUITERS

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview:

This position performs installation, maintenance, and repairs of computer driven electro-mechanical production equipment, ensuring that all related quality documentation is executed, while reviewing maintenance procedures for effectiveness.

Job Responsibilities and Essential Duties:

* Maintenance and repair of computer driven electro-mechanical manufacturing equipment in support of medical device production.

o Computer driven systems include proportional-integral-derivative (PID) operating controllers, programmable logic controllers (PLCs), and Human Machine Interface (HMI) automation.

o Sub-systems and components include electric drives, motors, electrical wiring, hydraulics, pneumatics, electrical panels, relays, printed circuit board circuitry, vacuum, and compressed air.

* Respond to emergency repair requests through troubleshooting, diagnosis, resumption of operation, and electronic documentation.

* Execute preventative/scheduled maintenance including planning of materials, parts, training, and other requirements to ensure work is executed in an efficient and timely manner.

* Document all work planned and performed in the computerized maintenance management system.

* Evaluate operation of equipment and instruments to conduct on-line adjustments. * Evaluate, quote, and order necessary replacement equipment, tools, and fixtures. * May develop or revise documents and procedures.

* Build Quality into all aspects of their work by maintaining compliance to all quality requirements.

Minimum Requirements :

* A high school diploma or equivalent is required. An associate degree or equivalent years of experience in Engineering, Science or related technical field is preferred

* 1-3 years of technician experience in a manufacturing environment is required; experience working in medical device manufacturing or other FDA regulated industry preferred.

Required Knowledge, Skills, and Abilities :

* Ability to read wiring diagrams, schematics, and plumbing diagrams to expertly troubleshoot electro-mechanical equipment, electric drives, motors, basic wiring, hydraulics, and pneumatics is required.

* Working knowledge of flow controls, valve selection, and pressure regulation.

* Must demonstrate effective verbal and written communication skills.

* Must be well organized and demonstrate the ability to work independently and manage multiple tasks and priorities.

* Must be flexible and demonstrate the ability to take initiative.

* Working knowledge of equipment powered by 120, 208/230, and 480VAC electrical voltage is required.

* Experience with PLC/HMI and MS-DOS programming languages is preferred.

* Proficiency with Microsoft Office products such as Word and Excel or equivalent software applications is preferred.

The pay for this role is a minimum of $25 per hour ($52k/yr) and a maximum of $33 per hour ($68,640/yr).

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Position Title: Assistant Electrical Superintendent

Reports To: Electrical Superintendent

Position Summary: The Assistant Electrical Superintendent executes the day-to-day operations within the electrical department as directed by the Electrical Superintendent. Responsible for safety, quality, schedule and budget of all assigned work. Assists in the planning, managing, and execution of electrical projects and repairs in production with applicable departments, personnel, and customers. Assist in the department’s development in trade skills and workmanship. Assist in organizing and managing the primary duties of the Marine Electrician which include the installation, test, and repair or marine cables and equipment, installation and connection of lighting, electrical power, troubleshooting and repair of shipboard and facilities electrical systems. Must be able to read blueprints, drawings, and schematics.

Pacific Shipyards International, LLC Expectations of Employee:

• Is committed to the company values and adheres to all Pacific Shipyards’ policies and procedures
• Perform duties of his/her job and as assigned by Management
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully
• Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department’s issues
• Consistently be on time for work, meetings, and appointments and deliver work projects by assigned due dates
• Maintain assigned work areas in a clean and orderly fashion
• Maintain and ensure the safety of all assigned equipment
• Perform all duties in conformance to appropriate safety and security standards
• Meet productivity goals and quality standards as set by management
• Ability to handle multiple tasks and balance priorities
• Computer proficiency in Microsoft Office

Essential Duties & Responsibilities:

• Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes
• Connect wires to circuit breakers, transformers, or other components
• Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of the system
• Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps
• Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes
• Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes
• Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem
• Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures
• Advise management on whether continued operation of equipment could be hazardous
• Maintain current electrician's license or identification card to meet governmental regulations
• Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes
• Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures
• Repair or replace wiring, equipment, or fixtures, using hand tools or power tools
• Install ground leads and connect power cables to equipment, such as motors
• Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools
• Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment
• Fasten small metal or plastic boxes to walls to house electrical switches or outlets
• Construct or fabricate parts, using hand tools, according to specifications
• Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects
• Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles
• Provide preliminary sketches or cost estimates for materials or services

Education/Training:

• 3 years or more in the Marine Electrical field
• Experience with US Navy Ship repair/NAVSEA regulation is required
• BS Electrical engineering degree
• Heavy Civil construction experience
• PLC and VFD experience A MUST
• Working knowledge of IT as it relates to electrical controls
• Ability to multi-task, prioritize and handle deadlines
• Ability to troubleshoot electrical systems;
• Extensive knowledge of MS Office and AutoCAD
• Ability to use Microsoft Product such as Word, excel, and adobe
• Excellent verbal and written communication skills

Qualification/Requirement:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites
• All candidates must submit to and pass a post -offer drug screening and background check before employment begins. Failure to complete any of these steps will result in disqualification
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift

Ready for a career move where you will feel valued as part of our family-owned business? In this job, you will provide your skilled electrical services to our Florida retail stores. This is a traveling position, with company vehicle provided and full travel expenses paid. The electrician is also paid for drive time to and from work locations in the state of Florida.

This is a traveling position and requires reporting to the SSC in Orlando on Mondays before leaving out for the week. Travel is approx. 50 weeks out of the year.

The ABC electrician handles layout, installs and repairs wiring, electrical fixtures, and equipment as detailed below:

• Plan new or modified installations to minimize waste of materials, provides access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes
• Follow diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings and flooring
• Measure, cut, bend, thread, assemble and install electrical conduits
• Pull wiring through conduits
• Splice wires by stripping insulation from terminal leads, twisting or soldering wires together and applying tape or terminal caps
• Connect wiring to lighting fixtures and power equipment
• Installs control and distributions apparatus such as switches, relays and circuit- breaker panels
• Connect power cables to equipment, such as electric range or motor and installs grounding leads
• Test continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, and oscilloscope
• Observe functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement
• Repair faulty equipment or systems
• Other duties as assigned by your supervisor

Minimum Experience, Skills, and Education

• Experienced commercial electrician skills required
• Self-started, able to work independently
• Must pass company-issued background check
• Must have solid driving record
• Solid communication skills to work with store staff and corporate office
• Must pass company-issued drug testing

Physical Requirements With or Without Accommodations

• Must be able to climb to high spaces, and/or crawl to low spaces
• Eye dexterity for long and short-range vision
• Ability to lift and move equipment and tools, up to 35 pounds
• Physically able to drive long distances in vehicle
• Manual dexterity and fine motor skills for electrical wiring and other work

Come join this family-owned, growth-oriented organization today! You will receive outstanding benefit options with your compensation, which include:

• PAID VACATION AND PTO
• TUITION REIMBURSEMENT
• ABC UNIVERSITY - GREAT WINE, SPIRITS, BEER, CIGAR TRAINING
• EXCELLENT WELLNESS-BASED HEALTH INSURANCE FOR INDIVIDUAL + FAMILY
• DENTAL AND VISION PLANS
• COMPANY-MATCH 401K PROGRAM
• EMPLOYEE DISCOUNTS ON WINE AND SPIRITS
• EMPLOYEE ASSISTANCE PROGRAM (EAP)
• PET INSURANCE

ABC is an equal-opportunity employer and is committed to providing a workplace free from harassment and discrimination. We are committed to recruiting, hiring, training and promoting qualified people of all backgrounds, and we make all employment decisions without regard to race, ethnicity, color, age, sex, gender, gender identity or gender expression, sexual orientation, religion, creed, marital status, pregnancy, national origin/ancestry, citizenship, physical/mental disability, genetic information, medical condition, military status, or any other basis prohibited by law ("protected status").

ABC is an alcohol-free, drug-free workplace.

Position Summary

This position involves the performance of semi-routine and diversified duties in connection with repairs to and maintenance of building and grounds requiring many skills found at the journeyman level such as carpentry for woodwork repairs, plumbing repairs, HVAC and electrical repairs, and painting work. The Maintenance Mechanic is expected to have knowledge of and manual skills in repairing such items as plumbing valves and pipes, electrical outlets and switches, stoves, refrigerators, windows, doors and other wood materials, air conditioning, and other mechanical equipment. In carrying out a full set of maintenance duties, the Maintenance Mechanic may be required to work under hazardous conditions such as sleet, snow, heat, cold, dust, and dirt. The Maintenance Mechanic generally exercises a great deal of independence in judgment in resolving problems related to repairing buildings and appurtenances. The Maintenance Mechanic may provide work direction and guidance to other Maintenance Mechanics.

Major Duties and Responsibilities (illustrative, not all-inclusive)

1. Independently performs a wide range of building and equipment repairs and maintenance functions,

frequently involving physical exertion.

2. Repairs or replaces plumbing fixtures and pipes such as toilets, sinks, drains, valves, and controls,

unclogs clogged fixtures and pipes using a variety of powered and non-powered sewer machines and

augers.

3. Trouble-shoots and repairs electrical ranges including such tasks as replacing burner controls and

switches, replacing electrical heating elements, rewiring electrical ranges, replacing door handles

and gaskets, etc.

4. Trouble-shoots and repairs or replaces electrical systems and components including switches,

outlets, lighting fixtures, circuit breakers, fuses, electrical wiring, etc.

5. Trouble-shoots and repairs HVAC systems and components including air conditioners, furnaces,

fans, blowers, thermostats, controls, etc.

Trouble-shoots and repairs or replaces refrigerators including replacing fans, compressors,

evaporator coils, controls, door handles, gaskets, etc.

7. Repairs or replaces windows, window frames, doors, door frames, locks, resilient and ceramic tile

floors, carpeted floors, ceilings, cabinets, roofs, fascia, soffits, gutters, downspouts, clotheslines,

mailboxes, etc.

8. Performs vacancy preparation work such as patching and preparing walls for painting, cleaning

stoves and refrigerators, replacing floor tile, cleaning, and making repairs to building surfaces,

fixtures, systems, and equipment.

9. Maintains in good repair all assigned service vehicles, tools, and equipment.

10. Uses a wide range of hand tools and equipment such as drills, hammers, pliers, screw drivers,

electrical testers, hand and power saws, cutters, plungers, threaders, wire brushes, paint rollers and

brushes, sprayers, etc.

11. Requisitions materials, supplies, and equipment for own purposes and for others working on teams

that may involve lifting heavy objects into place.

12. Inspects apartments for maintenance work to be done, usually as a result of a resident request or

Property Manager work order and completes repairs as directed by the Maintenance Supervisor.

13. Plans and carries out preventive maintenance and regular repair programs for building surfaces,

systems, fixtures, and playground equipment.

14. Performs a number of groundskeeping tasks, including but not limited to trash removal, trimming,

mowing, planting, snow removal, etc.

15. Performs routine cleaning of buildings and grounds as directed by the Maintenance Supervisor.

16. Provides after-hours and weekend emergency coverage as directed by the Maintenance Supervisor.

17. Attends workshops, seminars, and training sessions as instructed by the Maintenance Supervisor.

18. Performs other duties as directed by the Maintenance Supervisor.

Job Description:

• Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties.

Responsibilities:

• Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with customer specifications and local electrical codes.
• Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed.
• Measures, cuts, bends, threads, assembles, and installs electrical conduit, pulling wiring through conduit.
• Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps.
• Connects wiring to lighting fixtures and power equipment.
• Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels.
• Connects power cables to equipment, such as electric controls, and installs grounding leads.
• Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, and oscilloscope.
• Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
• Repairs faulty equipment or systems.
• Cuts and welds steel structural members.
• Assist in trouble shooting and electrical debug.
• Responsible for daily project status report.
• Provide cost to complete estimates bi-weekly.
• Log rework at the time of the rework.
• Participate in "Go fast” and Kaizen events.
• Keep work areas clean and safe
• General operation of crane, Hi-Lo, drill press and saws within the manufacturing facility.
• Other duties and projects may be assigned.

Qualifications:

• High School Diploma or general education diploma (GED)
• Minimum three years related experience and/or training; or equivalent combination of education and experience.
• Knowledge of basic mechanics and experience in machine tool.
• Knowledge of electrical tools (i.e. Channel Locks, Sockets, etc.), and Blue Print reading.
• Knowledge of overhead cranes, Hi-lo, Pallet Jack and other related equipment required to perform the job function.
• Knowledge of safety precautions in the Manufacturing environment.
• Active Driver's License

Language Skills:

• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write routine reports and correspondence.
• Ability to speak effectively before groups of customers or employees of organization.

Looking for Voice / Unified Communications Engineer

LOCATIONS:

- Charlotte: NC

- Richmond: VA

- Kennesaw: GA

MUST HAVE: Agile tools (Jira)

Looking for a professional engineer with in-depth knowledge of carrier/transport and SIP access technologies. The position will Voice Access and Security Services Engineering team directly supporting Architecture and Engineering functions for Collaboration and Productivity products and solutions.

This resource working in this position will be responsible for development of:

Product Management Lifecycle Program schedules and tasks

Communication materials for senior leadership

Engineering documentation in relation to fast moving programs

Ability to partner with communicate to technical resources while concurrently delivering presentation materials and program management details to C-Level is critical to this roles success.

Key Responsibilities:

Provide program guidance and develop program timelines from an engineering point of view in partnership with our program management office

Develop ROM/SOW quotes for projects for equipment placement and licensing

Assist in the development of project supporting documentation/information to include Bill of Materials (BOMs), cost estimates and equipment placement requests.

Directly support business initiated projects.

Direct and communicate with leadership on status of programs and open issues.

Provide local software and hardware support requiring complex integrated configurations in the areas of; Session Border Controller, Security Services, E911, SIP and Session Management, LAN/WAN, VoIP, Toll Free Engineering, with integrations to products such as Avaya, Cisco, and Genesys.

Complete SIT testing, document results, develop and write scripts, MOP and low level designs for implementation and configuration of Session Border Controller, Security Services, E911, and associated integrations.

Professional Competencies (Must Haves)

Experience in program communication and program management

Excellent customer service skills including reporting, organization, written and oral communication and task prioritization.

Communication skills a must, powerpoint, visio, structured program updates

Must be highly motivated and a self-directed individual.

Experience with configuration and support experience in a complex multi-layered network environment.

Participate in cross-functional teams and ability to work effectively in a geographically dispersed team.

Experience working under tight deadlines and high pressure environment.

Technical Competencies

10+ Years telecommunications experience.

Strong knowledge of session border controllers and SIP Trunking at a carrier level

Knowledge of SIP, RTP/RTCP, ISDN, H.323, H248, MGCP, codecs is required.

Experience with QoS configurations, jitter, diagnosing and tuning QoS and performing bandwidth analysis.

Knowledge of LAN/WAN communications, switches and routers.

Extensive working knowledge of call flows, system architecture, design principles and implementation

Excellent troubleshooting and analytical skills.

Capable of quickly learning new technologies and procedures, as well as being willing to train others in procedures mastered as part of implementations.

Additional Requirement

Strong knowledge of session border controllers; Ribbon 7k Session Border Controller and SIP/TDM Trunking.

Knowledge of SIP, RTP/RTCP, ISDN, H.323, H248, MGCP, codecs is required.

Experience with QoS configurations, jitter, diagnosing and tuning QoS and performing bandwidth analysis.

10+ Years telecommunications experience

3-5 years of experience in LAN/WAN networking