Wing Chun Jobs in Usa
352 positions found — Page 3
Family Nurse Practitioner
- FNP
- Part-Time Vibrant Rural Community with hiking, camping, backpacking, fishing, hunting The Community
- Mountain Home, ID Mountain Home is the largest city and county seat of Elmore County, the population was 14,206 at the 2010 census.
Mountain Home was originally a post office at Rattlesnake Station, a stagecoach stop on the Overland Stage Line, about seven miles east of the city, on present-day US-20 towards Fairfield.
With the addition of the Oregon Short Line railroad in 1883, the post office was moved downhill and west to the city's present site.
Mountain Home is a vibrant rural community located about 40 miles southeast of Boise.
Mountain Home is an excellent place to live and raise a family with a genuine sense of community.
Residents benefit from a cost of living roughly fifteen percent less than the national average, quality health facilities including St.
Luke's Elmore, and excellent schools, with several higher learning opportunities close by.
Our Clean air, low crime rate and abundance of recreational opportunities make everyday a pleasure to be enjoyed.
Mountain Home Air Force Base Located on a high desert plateau between two large mountain ranges, Mountain Home AFB is situated about 50 miles southeast of Boise and 90 miles northwest of Twin Falls, Idaho.
The city of Mountain Home, Idaho has a population of approximately 16,848.
Mountain Home Air Force Base is home to the 366th Fighter Wing, the "Gunfighters.
" The 366th Fighter Wing is a member of an air expeditionary force.
The Wing blends the firepower of F-15C Eagles and the F-15E Strike Eagles, to form a cohesive aerial.
REQUIREMENTS (duties include but are not limited to Provide a full range of nurse practitioner services in accordance with privileges granted by the Commanding Officer (e.g., supervise and provide general screening and medical care and examinations of patients for routine, acute and chronic conditions involving any and all organ systems; provide immunizations; diagnose, treat, and counsel patients as indicated).
Treat patients with common acute conditions, illnesses, or minor trauma within accepted protocols, Nurse Practice Acts, and/or in collaboration with a physician.
Collaborate with the physician in the health care of patients with chronic illnesses.
Request consultation or referral with appropriate physicians, clinics, or other health resources as indicated.
Order diagnostic tests as applicable.
Prescribe and dispense medications as delineated by the Pharmacy and Therapeutics Committee.
Promote preventive and health maintenance care, including annual physicals, positive health behaviors, and self-care skills through education and counseling.
Coordinates patient care through a continuum and facilitates the achievement of optimal outcomes in relation to care, quality and cost effectiveness Ensures compliance with standards of care and practice in accordance with all established policies, procedures, and guidelines used in the medical treatment facility.
Provides care within ethical and legal boundaries.
Assesses patients.
Ability to effectively communicate and collaborate with a diverse group of people for the purpose of informing the healthcare team of plans/actions, for teaching/education to benefit the patient/family and organization.
Effectively uses appropriate communication format in addressing professional issues Excellent written communication skills to perform accurate documentation, both written and electronic, of all activity in accordance with requirements.
Ability to recognize adverse signs and symptoms and react quickly in emergency situations.
Completes orientation and competency verification programs in accordance with (IAW) unit guidelines.
Participates in the orientation of newly assigned personnel, as appropriate.
Serves and participates in committees, functions and other meetings as directed.
Provides relevant and timely information to these groups, and assists with decision-making and process improvement.
Participates in customer service initiatives, and medical readiness activities, designed to enhance health services.
Ensures a safe work environment, employee safe work habits and patient safety IAW regulatory agencies, infection control policies, and process improvement initiatives.
QUALIFICATIONS Be a graduate of a Masters of Nursing program accredited by the National League for Nursing Accrediting Commission (NLNAC) or the Commission on Collegiate Nursing Education (CCNE).
Possess current unrestricted license to practice in one of the fifty states, the District of Columbia, the Commonwealth of Puerto Rico, Guam, or the U.S.
Virgin Islands.
Possess current certification (in the specialty corresponding to the specialty required by the task order) as a Nurse Practitioner by the American Nurses Credentialing Center (ANCC) or American Academy of Nurse Practitioners (AANP).
Possess current certification in Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS) as approved by the American Heart Association (AHA) for Healthcare Providers.
Have minimum of 24 months (2 years) of full-time experience within the last 36 months (3 years) in a setting corresponding to the requirements.
Possess and maintain a current Drug Enforcement Agency (DEA) registration number (certificate) to prescribe controlled substances as listed in 21 C.F.R.
1308.
KurzSolutions is committed to improving health outcomes by providing well-managed companies with the top healthcare talent in the market.
Be more than what you know yourself to be, here in Shiprock The Community: Shiprock, New Mexico The meaning of Shiprock in Navajo language is one that invokes imagination to all to know, which in the language is Tse Bit'a'I, which means winged rock.
It refers to the legend of the great bird that brought the Navajo from the north to their present lands, to the Four Corners region.
When you use your imagination, Shiprock viewed from certain angles truly does resemble a large sitting bird with folded wings; the north and south summits are the tops of the wings for the giant creature.
Witness the sculpted horizons of the southwest, where man-made boundaries mean nothing to the rugged lands.
Here, the past is present where Hopi families still carry water to pueblo villages perched atop high mesas.
Granaries at Keet Seel ruins in Navajo Nation Monument hold corn cobs stored seven centuries ago.
Navajo families farm centuries-old fields in Canyon de Chelly National Monument, the site of prehistoric cliff dwellings inhabited by the Anasazi, ancestors of today's Pueblo Tribes.
And Hopi and Navajo artisans still sell their trademark rugs and jewelry at the Hubble Trading Post.
Explore the Four Corners Region Here.
About the Facility: Shiprock Service Unit -Northern Navajo Medical Center The Shiprock Service Unit (SRSU) is the largest geographical service-unit of Navajo Area Indian Health Service (NAIHS).
SRSU population extends into New Mexico, Arizona, and Utah.
The scope of SRSU's responsibility is extensive and includes administrative oversight of one hospital.
NNMC and two health centers: Four Corners Regional Health Center and Dzilth-Na-O-Dith-Hle Health Center.
NNMC provides the following primary and specialty care services in inpatient and outpatient care services: medical-surgical, pediatric inpatient, labor and delivery, intensive care units, internal medicine, family practice, urgent and emergency care, women's health, pharmacy, optometry, dental, radiology, public health nursing, medical social services, health promotion/disease prevention and traditional medicine.
Furthermore, the NNMC ED is certified as PEDS Ready by the New Mexico Emergency Medical Services for Children and the University of New Mexico Child Ready Program.
This certification ensures effective emergency care for children.
Facility Address: Highway 491 North, Shiprock, NM 87420 RESPONSIBILITIES (listed are included but not limited to): Shall perform outpatient/inpatient pediatric duties and manage patient's needs, identified by the Service Unit and as directed by the Supervisor.
Shall perform in accordance with the competency standards listed in the Shiprock Service Unit Medical Staff By-Laws.
Shall provide professional medical services or direct patient care services under the terms of this contract, appropriate and timely medical services in accordance with the standards of care established by recognized medical care organizations.
Shall provide service in the pediatric department in the delivery of patient care.
Inpatient includes Pediatric Ward, reviewed and monitored by the Primary Care Director or their designee.
Will take night call approximately 2 to 4 times per month.
When in outpatient clinic, incumbent will evaluate and treat all patients placed in his/her exam room by staff.
All patients who sign in by 4 pm will be evaluated and treated before clinic is considered complete and incumbent leaves for the day.
When assigned to inpatient wards, will at least evaluate, treat, and document in medical record daily for each inpatient on the pediatric service, including well newborns.
Will admit and discharge these inpatients as medically appropriate.
Will also assist and provide consultation as requested to other specialists, the emergency room, the pediatric clinic, the labor and delivery suite, the urgent care clinic, and the inpatient pediatric and nursery nursing staff.
Within specialty area, assumes responsibility for the diagnosis, care and treatment of pediatric inpatients, ambulatory care patients and emergency cases in the capacity of a senior specialist or expert.
Typical but not all-inclusive assignments including the following: Interviews and examines pediatric patients, reviews past medical history and requests and/or performs diagnostic tests and examinations deemed necessary to obtain all possible information related to each case.
Make preliminary diagnosis, directs, prescribes, or provides treatment, or arranges for specialized care of pediatric referral as required.
Bases decision upon information obtained, professional medical knowledge and skills and prescribed policies and procedures.
Makes notes of observations to be incorporated into clinical records.
Provide emergency care as required.
Gives total patient care including prevention, health maintenance, early diagnosis, treatment and follow-up services to pediatric patients under his/her care.
Attends high risk vaginal deliveries and all C-section deliveries.
Provides neonatal resuscitation and stabilization as needed.
REQUIREMENTS Experience : Shall have 36 months of physician experience, with a minimum of 12 months in Pediatrics.
License / Registration : Shall be board certified or board eligible in physician and possess a current, valid, unrestricted license in any state, the District of Columbia, the Commonwealth of Puerto Rico, or a Territory of the United States.
Certifications : BLS, ACLS, PALS, and ATLS is mandatory.
Orders are then either boxed for carryout or delivery, or given to Servers for service in the dining room.
Cooks also prepare in advance of their need items used in the preparation of products sold by Pizza Hut, operate the cash register, wash dishes, and answer phones.
This is a critical position to the success of this Pizza Hut restaurant in that these are the Company's products.
ESSENTIAL FUNCTIONS: The following functions have been determined to be essential to the successful performance of this position.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members.
I.
PRE-OPENING Following the directions of the immediate supervisor, the person responsible for this position prepares a certain number of each type of pizzas sold at lunch time.
This includes these processes: A.Turn on equipment used in the preparation of products, for example, the dough proofer.
Review the prep list prepared by management to determine how much of each item needed will be prepared for the day.
B.Person responsible for this position will also turn on all equipment used in the kitchen for preparing customer orders.
C.Prepare sauce for pizzas following standard recipes.
Sauce is prepared in five gallon buckets.
When completed, a full bucket of sauce weighs about 30 pounds.
Pizza sauce is stored in the walk-in.
D.Prepare dough for different types of pizza crusts following the job aids posted in the restaurants.
E.Other items are prepared as called for on the prep list following standard recipes and procedures.
Items, once prepared, are stored in the walk-in refrigerator.
F.Operate computer system to take orders.
II.
OPEN HOURS A.When the Pizza Hut is open for business the person responsible for this position remains in the preparation area and makes products per the customers' orders.
This includes such items as pasta, garlic bread, sandwiches, wings, breadsticks and pizzas.
This requires that the person responsible for this position coordinate preparation of items ordered so that all items ordered are prepared quickly and correctly and are ready at the same time.
B.
The process of making a pizza involves these integral steps: 1.
Read the order ticket to determine what type and size of pizza needs to be made and kind of ingredients to be put on it.
2.
Select the correct type of dough needed to fill the order.
Dough may be kept in a number of places.
It may be under the maketable or in the reach-in cooler or in some other designated place.
3.
Place the correct type and amount of toppings, sauce and cheese according to the specs in the correct sequence on the pizzas as ordered by the customer.
4.
Place the pizza in the oven for baking.
Pizzas are prepared in metal pans that are placed in an opening at the end of the oven onto a moving conveyor belt.
The items proceed through the oven and emerge from the other end baked.
Due to differences in cooking times some food items are placed at different spots on the conveyor to control time in the oven.
5.
From time to time the oven must be opened using an access door and food items being baked attended to or other items inserted.
6.
Other items as ordered by the customer are prepared following standard written recipes and procedures.
7.
Check product as it comes out of the oven to assure that it has been properly prepared, correct ingredients, evenly distributed, properly baked.
8.
Cut pizzas into correct number of slices and either send with a Server into dining room or box for carryout.
C.Operate cash drawer as needed being sure to make change correctly.
Assist customers by taking order either over telephone or at front counter being sure to follow prepared script.
Enter order into the computer system.
D.As needed, while open for business, the person responsible for this position restocks the make table and cut table.
Items for restocking are stored in the walk-in, reach-in, or under the make table, or some other refrigerated piece of equipment.
III.
CLOSING A.When the restaurant closes, the person responsible for this position cleans up and closes down their work area.
This includes these integral steps: 1.
Clean out the reach-in cooler using hand towel and soapy water.
2.
Clean top and front of oven using hand towel and soapy water.
3.
Cover all food items with clean stainless steel cover(s) or plastic cover.
4.
Clean all stainless with hand towel and soapy water.
5.
Clean out the inside of make table.
NON-ESSENTIAL: The following are job functions customarily performed by the person responsible for this position, but are not considered essential functions.
A.Arrange work area to make pizzas.
This includes these integral steps: 1.
Preparing meat mix and veggie mix.
This is a particular combination of ingredients.
2.
Filling the make table with sufficient stock for the anticipated business.
Many different items are kept on the make table.
3.
Bringing pre-panned pizzas up to the make table to prepare for topping.
4.
The area where this work is done is in full view of the customer.
As such, this area needs to be kept clean as the work is in progress.
B.Responsible for cleaning all equipment used in prep work.
This includes cleaning and organizing shelves in the walk in refrigerator.
C.When needed, person performing this position will be required to respond to customer at the carryout counter and drive-thru window.
Locating orders.
Cashing out customers' tickets in computer.
Verifying order and thanking customers.
D.At the end of the shift, but not at closing time, the person responsible for this position has certain assigned clean-up and restocking responsibilities.
The make table, work area, and other areas in the restaurant are cleaned and prepared for the next shift.
This includes these steps: 1.
Sweeping and mopping floors.
2.
Refilling the make table, reach-in cooler and walk-in refrigerator.
3.
Cleaning the make table and reach-in cooler.
E.Prior to closing, the person responsible for this position cleans and prepares the work area for closing and for the next day's business.
This involves these steps: 1.
Sweeping and mopping floors.
2.
Refilling and restocking items on the make table.
3.
Break down and clean the make table.
4.
General cleaning throughout the area as in steps 1, 2, and 3 above.
5.
Break down and clean the wing fryer, cut table and other equipment used in the production of food for customers.
6.
Wash dishware, glassware, silverware, pans, and utensils used in preparing and serving food to customers.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Be able to perform or learn to perform the essential functions of the position, and do so at an acceptable pace.
B.
Mental alertness/intelligence.
Position involves tracking the progress of items as they are being prepared; and quickly and accurately determining flow of products out of the oven.
At times these responsibilities are performed by one person without supervision or assistance.
As many as 25 to 35 pizza and other food items may be baking at one time.
Must possess sufficient mental ability/intelligence to work effectively without supervision or assistance and to perform the job functions in a consistent and reliable manner.
C.
Sufficient physical condition to perform the functions of the position.
Position involves these physical processes: 1.
Lifting.
Must be able to lift 15 pound boxes of cheese and 40 pound cases of wings (4, 10 lb.
bags).
2.
Bending and stooping.
Must be able to stoop down and bend over to stock items stored in reach in refrigerator or under the maketable.
3.
Standing/walking.
One hundred percent of on job time is spent standing and walking.
4.
Seeing/vision.
Must have sufficient visual ability to read written instructions, prepare food items, and maintain clean area.
5.
Hearing.
Must possess sufficient hearing capacity to respond to verbal orders and instructions from supervisor or co-workers.
Must be able to hear customer orders as given over the phone.
6.
Speaking/verbalizing.
Must be able to provide verbal information to co-workers and supervisors as to status of orders, materials needed to fill orders, problems or difficulties that may arise as the job is in progress.
Must be able to verbalize order instructions to customers.
7.
Hand/eye coordination and manual dexterity.
Position involves manually preparing food products for customers following exact weights and measures according to company specification, while as many as 25 to 30 orders are waiting to be prepared.
Order tickets are identical in color, size and shape, which reduces visual cues for distinguishing between colors.
8.
Must be physically able to work under conditions of high temperature.
Food preparation areas are located close to ovens.
Ambient temperature in this area often exceeds 80 degrees.
9.
Reaching.
Position involves reaching into oven to extract product, reaching over head to obtain boxes and other items.
D.Reading.
Must be able to read at a sufficient level to follow written directions for product preparation, recipes, and comprehend simple written commands.
E.Self-control .
click apply for full job details
Job Title: Lead Design Engineer
Location: Tallassee, AL
Tata Technologies is seeking a Lead Designer to drive the structural design and integration of fuselage and wing components for utility aircraft using 3DEXPERIENCE tools. The role requires strong technical expertise in metallic and composite structures, weight optimization, and manufacturability, while ensuring compliance with aerospace certification standards. The Lead Designer will collaborate closely with cross-functional teams spanning stress analysis, manufacturing, and certification to deliver robust, efficient, and certifiable structural solutions.
Dimension of Function
Accountable for leading the design and development of fuselage and wing structures using Catia v5 and 3DEXPERIENCE platforms. Applies advanced knowledge of metallic and composite materials to achieve structural integrity, weight reduction, and cost efficiency while ensuring compliance with aerospace standards throughout the design, validation, and certification lifecycle.
Contacts
Works in close coordination with design, stress, manufacturing, and certification teams. Interfaces with project leads, suppliers, and regulatory authorities to ensure alignment, timely delivery, and compliance with program requirements.
Area of Responsibility
- Lead structural design activities for fuselage and wing assemblies under multiple load cases.
- Author, review, and approve CAD models, drawings, and design documents ensuring compliance and manufacturability.
- Collaborate with Stress Analysis team to validate and refine structural concepts.
- Drive design optimization for weight reduction, performance improvement, and cost-effectiveness.
- Apply expertise in metallic and composite materials to achieve efficient, durable, and certifiable structures.
- Conduct quality checks of design deliverables to ensure accuracy and adherence to standards.
- Interface with certification authorities to align with FAR 23 & FAR 27 requirements.
- Support prototype build, ground tests, and flight test campaigns to confirm design intent.
Knowledge / Experience
- 10+ years of experience in aerospace structural design.
- Bachelor’s degree in Aerospace / Mechanical Engineering
- Strong proficiency in CATIA V5, ENOVIA, and 3DEXPERIENCE.
- Well versed with composite modelling best practices and design principles.
- Deep understanding of both composite and metallic structures.
- Hands-on experience in structural weight optimization and material trade-offs.
- Familiarity with aerospace certification standards (FAR 23 & FAR 27).
- Exposure to eVTOL or UAV platforms is an advantage.
- Demonstrated project leadership, documentation, and presentation skills
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS), is seeking a Senior Avionics Hardware Engineer - Fighters Mission Systems (Level 5)in Berkeley, MO.
BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.
Position Responsibilities:
Overall subject matter expert and technical lead engineer for the Mission Computers and Stores Management hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight
Lead the hardware supplier design team in supporting all Tactical Fighters program needs
Develop interface control documents describing mechanical, electrical, and software interfaces
Perform technical problem investigation and resolution at subsystem, system, and platform integration levels
Perform weapon capability development, implementation, and integration onto a fighters platform
Out brief status to internal Boeing stakeholders/leadership and external customers
Support subsystem testing on the Mission Systems Hardware
Support system testing in ESIL and during Flight Test
Support SCFTA efforts for the Mission Systems Hardware
Support airworthiness efforts for hardware design, development and implementation
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship.
- An interim and/or final U.S. Secret Clearance Post-Start is required.
Ability to obtain and maintain Special Access Program (SAP) clearance
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry
(Level 5) 14+ years of work related engineering experience with a Bachelor’s or 12+ years of work related engineering experience with a Master’s or 9+ years of work related engineering experience with a PhD
Preferred Qualifications (Desired Skills/Experience):
Active U.S. Secret Security Clearance
Previous experience working on tactical fighters program
Previous experience designing, verifying and fielding avionics subsystems
Experience leading teams and mentoring engineering peers
Circuit card and backplane design and integration
Conflict of Interest: Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process.
Typical Education/Experience:
Leve 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range (Level 5): $154,700 - 209,300
Boeing offers the best benefits in Aerospace:
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) organization is seeking a Lead Aeroelasticity and Dynamics Engineer to support tactical aircraft programs in Hazelwood, MO!
As a member of the BDS Fixed-Wing Loads & Dynamics (L&D) Capability Team, you will be part of a core engineering team directly supporting production and development programs including F-15, F/A-18, T-7A, MQ-25, and proprietary programs. The L&D team is looking for individuals with experience in flutter, divergence, structural mode interaction (SMI) and aeroservoelasticity (ASE).
Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers’ overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.
The Flight Systems Engineering Capability is an exciting organization in Boeing Defense, Space & Security responsible for performing Flight Engineering across a large portfolio of products and development programs. Product areas within the Flight Systems Capability in the St. Louis region include Fighter Aircraft, Unmanned Aircraft, and Missiles/Weapons Systems. The set of specialized capabilities and skills maintained by our teammates are the foundation of what defines the majority of our Boeing products; things that FLY! The St. Louis region is continuing to grow, and Flight Engineering is looking for motivated, talented engineers to join the Boeing team on the exciting programs located in this region. Selected candidates will work a wide range of programs that will require design, analysis and testing in Flight disciplines to meet our customers' requirements.
Join our team and become a Flight Engineer with unmatched opportunity and potential; you’ll be supported to develop and maintain specialized skills that may be applied across multiple product domains. You’ll benefit from exposure to a variety of unique and challenging projects, and collaborate closely with other engineering disciplines and industry experts. Boeing is the world's largest aerospace company. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Position Responsibilities:
- Participate and/or leads in developing air vehicle requirements for aeroelasticity including flutter, divergence, freeplay and rigidity
- Collaborate with the airframe & subsystems design and analysis engineers to generate integrated aero and structural models for flight vehicle analysis consistent with a Model Based Engineering (MBE) environment
- Perform analysis for flutter, divergence, aeroservoelasticity, freeplay and rigidity to support air vehicle design and stores integration
- Define allowable flight envelopes and operational limits
- Develop flight flutter test and ground vibration test plans
- Create finite element models and correlate to test results
- Perform ground and/or flight test programs, by the development of test requirements, providing data for pre-test analysis, monitoring testing, data analysis anddocumenting results, in order to support design and verification of vehicle and components
- Review and approves airframe and subsystems hardware packages for flight worthiness and to ensure the air vehicle meets the service environment
- Provide data to support the definition and documentation of structural design requirements for the service life of the product, to ensure company, customer and regulatory requirements are met
- Present engineering data and results to management and customers during program level reviews and other technical meetings
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- 14 or more years' related work experience or an equivalent combination of technical education and experience
- 5+ years of experience with Air Vehicle Systems
- 5+ years experience in aerodynamics, aeroelasticity, flutter, structural dynamics, modern control systems and/or finite element methods
Preferred Qualifications:
- Active U.S. Security Clearance in the past 24 months
- 9+ years experience in aerodynamics, aeroelasticity, flutter, structural dynamics, modern control systems and/or finite element methods
- Experience working with Laboratory Test, Flight Test and/or Flight Science domains
- Experience leading teams on complex projects
- Experience in engineering modeling and/or analysis with computer programming of analytical models, simulations, and/or data
- processing
- Engineering experience with tactical fixed wing aircraft
- Strong communication skills and customer focus
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $154,700 - $209,300
Applications for this position will be accepted until Mar. 23, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.
Position Responsibilities:
- Overall subject matter expert and technical lead engineer for the Mission and Safety Computers hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight
- Lead the hardware supplier design team in supporting all Tactical Fighters program needs
- Develop interface control documents describing mechanical, electrical, and software interfaces
- Perform technical problem investigation and resolution at subsystem, system, and platform integration levels
- Perform weapon capability development, implementation, and integration onto a fighter’s platform
- Out brief status to internal Boeing stakeholders/leadership and external customers
- Support subsystem testing on the Mission Systems Hardware
- Support system testing in ESIL and during Flight Test
- Support Safety Critical Functional Thread Analysis efforts for the Mission Systems Hardware
- Support airworthiness efforts for hardware design, development and implementation
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 4: 9+ years of work-related experience with a Bachelor’s degree OR 7+ years of work-related experience with a Masters OR 3+ years of work-related experience with a PhD
- Knowledge of Military Standards/Handbook implementations – MIL-STD-810, MIL-STD-704, MIL-STD-461, etc.
- Experience with electrical schematics, wiring diagrams, functional diagrams
- Tactical Fighters platform knowledge, including subsystem and platform integration
- Experience mentoring, coaching and leading technical projects and teams
Preferred Qualifications (Desired Skills and Experience):
- Knowledge of Core Processing, Image/Display/Video Processing, Built-In Test Requirements, and Safety Computing
- Knowledge of Circuit Card Assembly design, fabrication, and verification
- Knowledge of avionics box interfaces – MIL-STD-1553, Serial buses, RS-170/RS-422/RS-232, hardware discrete, fiber/ethernet
- Knowledge of avionics quality inspection and acceptance processes
- Knowledge of Software Requirements, Software Environments, and Platform Operational Flight Program development
- Experience working closely with United States Government and aircrew
- Tools/application familiarity – DOORS, MSOSA/Cameo, Teamcenter, MS Office & Project, etc.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Shift:
This position is for 1st Shift
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $129,200-174,800
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS), is seeking a Senior Avionics Hardware Engineer - Fighters Mission Systems (Level 5)in Berkeley, MO.
BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.
Position Responsibilities:
Overall subject matter expert and technical lead engineer for the Mission Computers and Stores Management hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight
Lead the hardware supplier design team in supporting all Tactical Fighters program needs
Develop interface control documents describing mechanical, electrical, and software interfaces
Perform technical problem investigation and resolution at subsystem, system, and platform integration levels
Perform weapon capability development, implementation, and integration onto a fighters platform
Out brief status to internal Boeing stakeholders/leadership and external customers
Support subsystem testing on the Mission Systems Hardware
Support system testing in ESIL and during Flight Test
Support SCFTA efforts for the Mission Systems Hardware
Support airworthiness efforts for hardware design, development and implementation
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship.
- An interim and/or final U.S. Secret Clearance Post-Start is required.
Ability to obtain and maintain Special Access Program (SAP) clearance
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry
(Level 5) 14+ years of work related engineering experience with a Bachelor’s or 12+ years of work related engineering experience with a Master’s or 9+ years of work related engineering experience with a PhD
Preferred Qualifications (Desired Skills/Experience):
Active U.S. Secret Security Clearance
Previous experience working on tactical fighters program
Previous experience designing, verifying and fielding avionics subsystems
Experience leading teams and mentoring engineering peers
Circuit card and backplane design and integration
Conflict of Interest: Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process.
Typical Education/Experience:
Leve 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range (Level 5): $154,700 - 209,300
Boeing offers the best benefits in Aerospace:
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company has an exciting opportunity for a F/A-18E/F and EA-18G Mission Systems Integration Manager to join Boeing Defense, Space & Security (BDS) in Berkeley, Missouri.
BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.
The candidate will enable the Mission Systems organization to continue to expand its business base and will participate in advancing fighter aircraft technology by leading an Integration, Analysis and System Test Engineering team. The team is responsible for developing system/subsystem requirements, participating with Software engineers with real-time Operational Flight Program (OFP) development, subsystem/system testing, and evaluating system performance in Flight Test. Simulation and modeling is utilized to assist in requirements development, software development and offsets some Flight Test verification.
Position Responsibilities:
Ensure that the team delivers safe and high-quality program products within cost and schedule
Coordination with program management, suppliers, customers and other Boeing teams
Provide technical, programmatic and process leadership to team members
Monitor team and supplier performance to ensure proper system integration and compliance with requirements
Support production with issue resolution for delivered hardware and software over the entire product lifecycle
Perform managerial HR functions
Lead, develop, and motivate employees
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. A small amount of Travel will be required.
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active).
A final U.S. Secret Clearance Pre-Start is required.
Basic Qualifications (Required Skill/Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry
9+ years of work-related experience with a Bachelor's or 7+ years of work-related experience with a Masters or PhD
7+ years of technical engineering experience
5+ years of experience in the Mission Systems field on military aircraft
5+ years of experience leading or managing teams and/or projects
Preferred Qualifications (Desired Skills/Experience):
With the above Bachelor degree, also have an MBA or equivalent degree
Strong collaboration and coordination skills
Excellent written and verbal communication skills
Experience delivering presentations
Experience with Earned Value Management
Experience mentoring engineers and less-experienced managers
Working knowledge of Scale Agile Framework (SAFe)
Active Top-Secret Security Clearance
Experience with Model Based Systems Engineering
Familiarity with tools such as Jira, Confluence, GitLab and Jama Connect
Conflict of Interest:
Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process.
Typical Education:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Relocation: choose one below
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for 1st shift
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs.
Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Manager Level: $170,000 - $230,000
Applications for this position will be accepted until Mar. 23, 2026
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense, Space & Security (BDS) organization is seeking a Lead Aeroelasticity and Dynamics Engineer to support tactical aircraft programs in Hazelwood, MO!
As a member of the BDS Fixed-Wing Loads & Dynamics (L&D) Capability Team, you will be part of a core engineering team directly supporting production and development programs including F-15, F/A-18, T-7A, MQ-25, and proprietary programs. The L&D team is looking for individuals with experience in flutter, divergence, structural mode interaction (SMI) and aeroservoelasticity (ASE).
Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers' overall mission requirements—from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace.
The Flight Systems Engineering Capability is an exciting organization in Boeing Defense, Space & Security responsible for performing Flight Engineering across a large portfolio of products and development programs. Product areas within the Flight Systems Capability in the St. Louis region include Fighter Aircraft, Unmanned Aircraft, and Missiles/Weapons Systems. The set of specialized capabilities and skills maintained by our teammates are the foundation of what defines the majority of our Boeing products; things that FLY! The St. Louis region is continuing to grow, and Flight Engineering is looking for motivated, talented engineers to join the Boeing team on the exciting programs located in this region. Selected candidates will work a wide range of programs that will require design, analysis and testing in Flight disciplines to meet our customers' requirements.
Join our team and become a Flight Engineer with unmatched opportunity and potential; you'll be supported to develop and maintain specialized skills that may be applied across multiple product domains. You'll benefit from exposure to a variety of unique and challenging projects, and collaborate closely with other engineering disciplines and industry experts. Boeing is the world's largest aerospace company. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Position Responsibilities:
- Participate and/or leads in developing air vehicle requirements for aeroelasticity including flutter, divergence, freeplay and rigidity
- Collaborate with the airframe & subsystems design and analysis engineers to generate integrated aero and structural models for flight vehicle analysis consistent with a Model Based Engineering (MBE) environment
- Perform analysis for flutter, divergence, aeroservoelasticity, freeplay and rigidity to support air vehicle design and stores integration
- Define allowable flight envelopes and operational limits
- Develop flight flutter test and ground vibration test plans
- Create finite element models and correlate to test results
- Perform ground and/or flight test programs, by the development of test requirements, providing data for pre-test analysis, monitoring testing, data analysis anddocumenting results, in order to support design and verification of vehicle and components
- Review and approves airframe and subsystems hardware packages for flight worthiness and to ensure the air vehicle meets the service environment
- Provide data to support the definition and documentation of structural design requirements for the service life of the product, to ensure company, customer and regulatory requirements are met
- Present engineering data and results to management and customers during program level reviews and other technical meetings
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- 14 or more years' related work experience or an equivalent combination of technical education and experience
- 5+ years of experience with Air Vehicle Systems
- 5+ years experience in aerodynamics, aeroelasticity, flutter, structural dynamics, modern control systems and/or finite element methods
Preferred Qualifications:
- Active U.S. Security Clearance in the past 24 months
- 9+ years experience in aerodynamics, aeroelasticity, flutter, structural dynamics, modern control systems and/or finite element methods
- Experience working with Laboratory Test, Flight Test and/or Flight Science domains
- Experience leading teams on complex projects
- Experience in engineering modeling and/or analysis with computer programming of analytical models, simulations, and/or data
- processing
- Engineering experience with tactical fixed wing aircraft
- Strong communication skills and customer focus
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $154,700 - $209,300
Applications for this position will be accepted until Mar. 23, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
