What Is A Remote Controller Jobs in Usa

• Competitive Base Salary!
• Extremely Competitive Equity Package!
• Flexible Work Schedules!
• Accelerated Career Growth!

Under supervision and direction, performs a variety of routine, semi-skilled work in the maintenance, care, and modification of college grounds, landscapes, structures, and irrigation systems, which include the operation of electrically-powered and gas-powered groundskeeping equipment and machines, and the use of small hand and power tools or equipment. Employee reports to Special Projects Coordinator.

• Demonstrate dedication to job performance and complete tasks as assigned
• Accept direction and guidance from supervisory personnel
• Maintain clear and concise communication with internal and external stakeholders
• Maintain a clean appearance
• Adhere to work schedule
• Report any potential safety hazards to the appropriate supervisor
• Be flexible in adjusting to maintenance routines based on changing needs or unexpected situations.
• Assist facilities team with small repairs, cleaning common areas, moving furniture, setting up for events, and preparing outdoor spaces.
• Operate vehicles and electrically-powered and gas-powered equipment, such as mowers, tractors, snow blowers, chain saws, electric clippers, sod cutters, and pruning saws.
• Mow or edge lawns, using power mowers or edgers.
• Shovel snow from sidewalks, driveways, or parking lots and spread salt in those areas.
• Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, sidewalks, or walls.
• Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
• Prune or trim trees, shrubs, or hedges, using shears, pruners, or chainsaws.
• Gather and remove litter.
• Maintain or repair tools, equipment, or structures, such as buildings, greenhouses, fences, or benches, using hand or power tools.
• Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
• Provide proper upkeep of sidewalks, driveways, parking lots, fountains, planters, burial sites, or other grounds features
• Ensure grounds maintenance equipment and building maintenance equipment are operational by performing routine and preventative maintenance and cleaning of tools, equipment, and machines within reasonable capabilities
• Provide a record of grounds and landscape watering and chemical spraying by keeping daily logs of areas watered and duration of watering and the application of chemicals, including areas sprayed, amount and type of chemical used, and substances sprayed and the reason.
• Prepare outdoor locations for use by visitors, vendors, and the public as needed by campus operations, and if applicable, marking parking lots and setting up tents, tables, and seating.
• Install irrigation systems, modify existing ones, and assist with system design to ensure proper layout and coverage.
• Operate and maintain irrigation systems by checking for leaks, replacing sprinkler heads and other parts, and repairing plumbing and electrical issues.
• Program controllers and timers, test systems for proper function, and make adjustments as needed.
• Cut, shape, and mix materials such as brick, concrete, and stone.
• Contributes to the overall success of the campus by performing all other duties as assigned.

• High School Diploma or GED
• Two years of experience in groundskeeping
• Valid motor vehicle license
• Customer-service oriented

• Experience in sprinkler systems components, design, and installation
• Experience in masonry or related field
• Experience operating tools and heavy equipment used for installation and repair

• Ability to manage time and schedules
• Ability to foster a cooperative work environment
• Ability to lift and carry heavy objects
• Ability to communicate effectively, both orally and written
• Ability to complete routine paperwork
• Ability to read English language sufficiently to understand written work orders and instructions as well as directions for the proper mixture, use, and disposal/storage of cleaners, solvents, chemicals, fertilizers, and similar products used in groundskeeping
• Ability to properly operate and maintain grounds maintenance tools, equipment, and machinery
• Ability to understand, follow, and enforce safety procedures
• Ability to work with minimal supervision
• Knowledge of various construction materials, including different types of stone, brick, concrete, and their appropriate uses.
• Skill in using various tools such as chisels, levels, saws, and power tools.
• Knowledge of irrigation components, controllers, plumbing, and electrical wiring.
• Ability to troubleshoot and diagnose problems with irrigation systems.

• Work is performed primarily outdoors, year round, with occasional indoor tasks during inclement weather
• Work environment involves some exposure to and use of chemical compounds, which may be hazardous and cause injury if specific instructions regarding their mixture, application, use, and disposal/storage are not properly followed
• Work may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises
• Requires a full range of physical motion in order to operate manual, electrically-powered, and gas-powered equipment and machines
• Prolonged walking or standing, bending and stooping, and climbing ladders
• Frequent moving and lifting up to 50 pounds
• Occasionally move and lift more than 80 pounds

A complete application must include: 1) a letter of interest, 2) resume, and 3) names, email addresses, and phone numbers of (3) three professional references.

Required application materials should be uploaded to the \"Resume Drop Box\" of your application.

References will be contacted in conjunction with interviews.

NNMC is an equal opportunity employer.

Job Location: 275 Rex Blvd Auburn Hills MI 48326

Position Type: Direct Hire

Job Title: Purchase Buyer

Minimum Requirements:

• 5 years of experience
• Bachelor's degree in supply chain management or in mechanical engineering or electrical engineering
• Proficiency in MS Office, ERP SCM
• Troubleshoot supply chain issues by reviewing available options, identifying root causes, and implementing the most effective corrective actions.
• Proven capability to manage multiple priorities and deliver results within demanding timelines.
• Ability to take ownership of assigned tasks and work independently with minimal supervision.
• Proven team player who contributes positively to team culture, communication, and shared goals
• Negotiation and Analytical skills
• Proactive thinking and forecasting skills
• Periodic travel to suppliers along with client sites

Job description:

• Our company is seeking a motivated Purchase Buyer to join our team. As the purchase buyer, your primary responsibility will be to follow & maintain Purchase SOP, be accountable for routine executions, cost control & escalations. Be responsible for domestic & International Sourcing for Automation and Logistic Automation and for developing domestic and global supplier base and monitoring supplier accounts payables.
• Commodities to be handled by team such as PLCs, Industrial PCs, Sensors, Switchgear, Scanners, Light Curtain, Cables, Cords, controllers, vision system, IT purchase, Pneumatics, Hydraulics, Motors, Gearbox, Servo, Screw Jacks, Tools, Bearings, chains & sprockets,Aluminum Extrusions, Hand tools, Hardware, Manufacturing (Machining & Fabricated items including surface finish like painting or Powder coating.
• Sourcing of Global & Local Trade / Labor for in-house & on-site installation & commissioning

Job responsibilities:

Supplier Management & Review

• Review & evaluate Suppliers' business account of Class 'A' & 'B'
• Alternate sourcing / ensure development of substitute for each commodity Procurement
• Review Indent, prioritize urgencies & initiate procurement process Ontime Procurement at optimum cost
• Resolve queries related to procurements with Stores & Accounts on daily basis
• Responsible for Procurement of Capex & maintain & monitor compliance record of on time actions.
• Utilization / liquidation efforts on Excess inventory

Inventory Management

• Analyze & define Reorder level
• Achieve adequate inventory management by suggesting nearest alternative available in
• excess, cost effective, alternates (makes).
• Compliance
• Ensure SOP compliance & resolve points / queries raised
• MIS
• Review of Pending PO report on weekly basis & PO Vs GRIR report on monthly basis
• Update Goals & Achievement Folder for KRAs on weekly basis

Organization Description:

Make a meaningful difference in the lives of Oakland youth. At Boys & Girls Clubs of Oakland (BGCO), our mission is to develop our community’s youth into positive contributors to society. We provide programs and services tailored to the needs of today’s youth while complementing the efforts of families, schools, and other community-based organizations.

We aim to ensure that every young person has the opportunity to reach their full potential as goal-oriented, responsible, and productive members of society. BGCO currently serves nearly 2,000 youth across three Clubhouse locations in Oakland, providing outcome-driven programming in three key areas: Academic Success, Good Character & Citizenship, and Healthy Lifestyles.

We value people, professionalism, initiative, integrity, responsibility, and teamwork.

This position will be based at the following Clubhouse:

Anna Marie Whalen Branch

3300 High Street, Oakland, CA 94619

Employment Details

• Status: Part-time
• Hours: After-school hours: 4-8pm; summer and school break hours: 11-3 or 12-4
• Pay: $25 / hour
• Benefits: Paid sick leave, training opportunities

Job Summary:

The Music Studio Director (Part Time) is responsible for planning, implementing, and evaluating a high-quality music program that teaches modern music production and performance, with a strong emphasis on rap and hip hop. This role guides youth through beat making, songwriting, vocal recording, mixing, and basic release planning while modeling and maintaining a safe, respectful, and creative studio culture.

Primary Responsibilities:

Program Development & Instruction:

• Teach core music production skills including beat making, sampling, MIDI programming, arrangement, vocal tracking, basic mixing and mastering, export, and delivery.
• Create and mix rap and hip hop music with youth, including instruction on flows, hooks, verse structure, ad libs, punch-ins, comping, and basic tuning.
• Instruct youth on Digital Audio Workstations (DAWs) such as Pro Tools, Logic Pro, or Ableton Live.
• Teach proper use of studio hardware including audio interfaces, microphones, MIDI controllers, studio monitors, and headphones.
• Lead audio and video projects that support BGCO goals and result in finished tracks, EPs, or other creative outputs.
• Design engaging classes, workshops, and a culminating showcase of youth work.

Studio Operations & Administration:

• Oversee day-to-day studio operations, including scheduling, equipment care, troubleshooting, and overall studio readiness.
• Plan annual class calendars and ensure program policies are current and followed.
• Maintain attendance, registration, and project records for participants.
• Manage routine administrative needs related to the music studio program.

Youth Engagement & Collaboration:

• Recruit and retain program participants and support consistent attendance.
• Attend team meetings, support organizational events, and contribute to program strategy.
• Collaborate with site leadership, program staff, and development staff to align on goals and media needs.

Additional Responsibilities:

• Support special programs and events as assigned.
• May be required to drive a Club van if authorized.
• Consult with parents or caregivers when appropriate.
• Perform other duties as assigned.

Relationships:

• Internal: Daily interaction with Branch leadership, program staff, and development staff to align on programming goals and media needs.
• External: Engagement with volunteers, guest artists, and donors as approved.

Qualifications:

• Demonstrated, hands-on experience creating and mixing rap and hip hop music.
• Proficiency with at least one professional DAW such as Pro Tools, Logic Pro, or Ableton Live.
• Practical knowledge of microphones, preamps, audio interfaces, MIDI controllers, and studio monitors, with the ability to set up, operate, and maintain equipment.
• Experience working with teens in creative or educational environments.
• CPR and First Aid certification required or obtained within 60 days of hire.
• Background check and TB clearance required prior to working with youth.
• Valid driver’s license and acceptable driving record if driving is assigned.

Manufacturing Yard Planning & Inventory Manager

Position Summary

The Manufacturing Yard Planning & Inventory Manager is responsible for planning, controlling, and optimizing raw materials, work-in-progress (WIP), and finished goods inventory-including steel coils, plates, and pipe products—across yard and storage operations.

This role ensures safe, efficient, and cost-effective material flow, supports uninterrupted production, and improves yard utilization, inventory accuracy, and dispatch readiness in alignment with production schedules, logistics requirements, and customer delivery commitments.

Key Responsibilities

Yard Planning & Layout Management

• Develop and maintain optimized yard layouts for steel coils, plates (LSAW and specialty grades), pipes (HFI / ERW / LSAW), finished goods, and dispatch zones.
• Ensure efficient movement of materials from storage to production with minimal handling and congestion.
• Coordinate stacking, segregation, and accessibility based on grade, size, and production priority.

Inventory Management & Control

• Own inventory accuracy for raw materials, WIP, and finished goods.
• Maintain real-time inventory visibility using ERP and WMS systems.
• Lead cycle counts, physical inventories, and variance resolution.
• Ensure FIFO compliance, heat traceability, and proper material identification.

Production & Dispatch Coordination

• Partner daily with production planning, coating, quality, and logistics teams.
• Ensure timely availability of materials to support production schedules.
• Support truck, rail, and barge dispatch activities.
• Prevent production delays caused by material shortages or misplacement.

Yard Operations & Safety Leadership

• Enforce safety standards for crane operations, forklifts, and heavy material handling.
• Ensure compliance with OSHA and internal safety policies.
• Conduct safety audits and implement corrective actions.
• Promote a strong, zero-incident safety culture.

Systems, Reporting & Continuous Improvement

• Use ERP/WMS tools to track inventory movement, aging, and dwell time.
• Develop and monitor KPIs related to inventory accuracy, yard utilization, damage, and dispatch performance.
• Lead Lean, 5S, and continuous improvement initiatives.
• Support automation and digital improvement efforts within yard operations.

Team Leadership

• Lead yard planners, inventory controllers, and yard supervisors.
• Set performance expectations, accountability, and development plans.
• Train teams on safety standards, systems, and best practices.

Qualifications & Experience

Education

• Bachelor’s degree in Supply Chain, Industrial Engineering, Logistics, or a related field.

Experience

• 7–12+ years of experience in yard operations, inventory control, or manufacturing logistics.
• Background in steel, pipe, or heavy manufacturing environments.
• Hands-on experience with steel plates, coils, and large-diameter pipe.
• ERP system experience (SAP preferred).
• Familiarity with rail, truck, and barge logistics.

Key Competencies

• Strong operational planning and execution skills
• Deep understanding of steel plate and pipe handling
• Safety-first leadership mindset
• Data-driven decision making
• Strong communication and people leadership skills
• Continuous improvement focus

Key Performance Indicators

• Inventory accuracy ≥ 99%
• Zero production delays due to material availability
• Reduced material handling and rehandling
• Improved yard utilization
• Reduced damage and demurrage
• On-time dispatch performance

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Responsibilities:

MUST HAVE:

1. 2 - 5 years of experience with robot setup, troubleshooting, and/or programming

2. Must have experience with with Fanuc (ie. SpotTool+ & V9.40 for the R30iB Plus robot controller) **if they have certification only experience, that is fine!

3. Must be willing to work onsite in Warsaw, IN 6 days/week

Schedule:

• 6 days on, 12 hour shifts. They will work overtime (time and a half)
• 6am-6pm Shift 1
• 6pm-6am- Shift 2
• (let us know which shift they are open to)

REQ OVERVIEW:

In this role, you will be supporting integration and commissioning efforts for a high-volume automotive manufacturer in northern Indiana. This role requires strong hands-on experience with Fanuc robotics, body applications, and special means build. The successful candidate will play a critical role in programming, touch-ups, commissioning support, and quality collaboration during pre-commissioning and launch phases. You will be responsible for the following:

- Develop, modify, and optimize Fanuc robot programs for body shop applications

- Perform robot teaching, touch-ups, and recovery in active production and pre-commissioning environments

- Configure robot frames, tools, payloads, and TCPs to meet process and quality requirements

- Support rapid program adjustments during special means build

- Support robot cell star-up, offline system work, and commissioning activities

- Troubleshoot robot alarms, motion issues, and sequence ladder logic under tight timelines

- Provide on-floor support during peak programming and commissioning periods

- Collaborate closely with Quality teams to resolve process issues

- Perform touch-ups and refinements to improve weld quality, part accuracy, and repeatability

- Support containment actions and fast-turn engineering changes during builds

- Coordinate with controls teams to validate I/O, interlocks, and basic handshaking

- Follow all safety procedures during programming and floor support

- Work safely in active manufacturing and commissioning environments

Manufacturing Engineer – Advanced Detector Systems

Location: Sturbridge, MA (100% Onsite)

Salary: Up to $140K depending on experience

Environment: ISO 7 Cleanroom, High‑Voltage/High‑Vacuum Equipment

Candidates with backgrounds in semiconductor fabrication, vacuum systems, photonics, electron‑optical components, or high‑voltage instrumentation are strongly encouraged to apply.

Position Summary

We are seeking a hands‑on Manufacturing Engineer to support electrical testing, troubleshooting, and production of advanced detector technologies, including microchannel‑based devices and electron‑multiplying components. This role is highly technical and hardware‑focused, requiring daily work on the production floor within an ISO 7 cleanroom.

You will ensure detector assemblies meet stringent electrical, vacuum, and performance specifications while supporting test station operations, conducting full detector teardowns, and maintaining test capability during high‑priority manufacturing periods. This position also plays a key role in transitioning from manual testing to more automated systems.

What You’ll Do

Electrical Testing & Data Integrity

• Perform electrical testing on detector components using high‑vacuum systems (10⁻⁷ to 10⁻⁶ Torr).
• Maintain test stations and ensure data accuracy and traceability.
• Identify and escalate anomalies in test results.

Troubleshooting & Failure Analysis

• Diagnose electrical, mechanical, and vacuum‑related issues in detector assemblies.
• Conduct full mechanical and electrical teardowns.
• Investigate failure modes such as low gain, shorts, contamination, vacuum leaks, alignment issues, or component damage.

Manufacturing Support

• Work directly with cleanroom operators to resolve production issues quickly.
• Update work instructions, procedures, and test documentation.
• Train operators and new engineers on testing, teardown, and handling methods.
• Support yield improvement and scrap‑reduction initiatives.
• Track, analyze, and report yields, scrap rates, and defect trends.
• Provide day‑to‑day support across multiple product lines; occasional off‑shift work may be required.

Process Control & Continuous Improvement

• Use MINITAB for basic SPC, trend analysis, and yield monitoring.
• Support the transition from manual to semi‑automated test equipment.
• Identify opportunities to improve test repeatability, throughput, and data capture.
• Contribute to Lean Manufacturing, 5S, and SPC implementation.
• Promote adherence to ISO 9001‑based quality systems.

Equipment & Fixture Support

• Maintain and configure high‑voltage power supplies, vacuum controllers, electrometers, oscilloscopes, and custom fixtures.
• Assist in modifying fixtures or creating temporary setups to maintain production continuity.

Required Qualifications

• U.S. citizenship (required due to ITAR regulations).
• Bachelor’s degree in Engineering (Electrical, Mechanical, Materials, Physics, or related field).
• Hands‑on experience with high‑voltage systems, high‑vacuum equipment, precision instrumentation, or cleanroom operations.
• Strong mechanical aptitude and comfort working directly with hardware.
• Ability to troubleshoot electrical and mechanical issues methodically.
• Strong technical communication skills—written and verbal.
• Proficiency with MS Office, MRP systems, databases, and analytical/statistical tools.
• Ability to work full‑time onsite in an ISO 7 cleanroom environment.
• Willingness to learn specialized detector physics and test methods.

Preferred Qualifications

• Background in semiconductor, photonics, vacuum systems, electron optics, or detector technologies.
• Experience with SPC tools, MINITAB, or basic statistical analysis.
• Familiarity with high‑voltage power supplies, vacuum chambers, turbopumps, or electrometers.
• Experience assembling or disassembling delicate electro‑mechanical components.
• Understanding of gain behavior or noise mechanisms in electron‑multiplying devices (e.g., PMTs, MCPs, avalanche detectors).

Work Environment

• 100% onsite in a high‑tech manufacturing facility.
• ISO 7 cleanroom requiring gowning, gloves, and contamination‑control procedures.
• Work involves high‑voltage and high‑vacuum equipment; full safety training provided.
• Standard day shift with occasional support needed for urgent production issues.
• PPE such as safety glasses, gloves, and hearing protection may be required.

CNC Swiss Machinist

Location: Hudson, NY

Shift: 1st (6 AM - 3 PM)

Industry: Precision Manufacturing / CNC Machining

Employment Type: Full-Time

Position Overview

we are currently recruiting for an experienced CNC Swiss Machinist on behalf of one of our manufacturing clients. This role is ideal for a skilled machinist who can independently set up, operate, and adjust CNC machining centers while maintaining high standards for quality, safety, and productivity.

The successful candidate will work with minimal supervision, interpret complex blueprints, select appropriate tooling, and ensure precision machining of components in a fast-paced manufacturing environment.

Key Responsibilities

• Set up and operate CNC milling machines
• Perform machine adjustments and troubleshoot CNC controllers, tooling, and machining processes
• Read, interpret, and work from detailed blueprints, drawings, and work instructions
• Select appropriate cutting tools, fixtures, and work holding devices
• Set and optimize feeds, speeds, offsets, and tool paths to ensure quality and efficiency
• Perform in-process and final inspection of machined parts using precision measuring instruments (micrometers, calipers, height gauges, etc.)
• Maintain dimensional accuracy and surface finish requirements per print specifications
• Work independently with minimal supervision while meeting production schedules
• Assist with continuous improvement efforts related to machining efficiency and quality
• Maintain a clean, organized, and safe work environment, including machines, tools, and shop floor
• Monitor tool wear and re-order tooling as needed to prevent production downtime
• Follow all company safety policies and quality standards

Qualifications & Requirements

• High School Diploma or GED required
• 2–3 years of hands-on experience in CNC Swiss
• Strong knowledge of CNC machining principles and milling processes
• Ability to read and interpret blueprints and GD&T specifications
• Experience using precision inspection tools for dimensional verification
• Comfortable working independently and taking ownership of assigned machines and jobs
• Ability to lift up to 70 lbs and perform physical tasks associated with machining operations

Job Title: Purchase Buyer

Location: Auburn Hills, MI 48326

Duration: Direct-Hire/ Full-Time

Note:

• Needs 10% travel.
• Hourly position with a potential of overtime

Job Description:

• Our company is seeking a motivated Purchase Buyer to join our team. As the purchase buyer, your primary responsibility will be to follow & maintain Purchase SOP, be accountable for routine executions, cost control & escalations.
• Be responsible for domestic & International Sourcing for Automation and Logistic Automation and for developing domestic and global supplier base and monitoring supplier accounts payables.
• Commodities to be handled by team such as PLCs, Industrial PCs, Sensors, Switchgear, Scanners, Light Curtain, Cables, Cords, controllers, vision system, IT purchase, Pneumatics, Hydraulics, Motors, Gearbox, Servo, Screw Jacks, Tools, Bearings, chains & sprockets, Aluminum Extrusions, Hand tools, Hardware, Manufacturing (Machining & Fabricated items including surface finish like painting or Powder coating.
• Sourcing of Global & Local Trade / Labor for in-house & on-site installation & commissioning

Job responsibilities:

Supplier Management & Review

• Review & evaluate Suppliers' business account of Class 'A' & 'B'
• Alternate sourcing / ensure development of substitute for each commodity Procurement
• Review Indent, prioritize urgencies & initiate procurement process
• Ontime Procurement at optimum cost
• Resolve queries related to procurements with Stores & Accounts on daily basis
• Responsible for Procurement of Capex & maintain & monitor compliance record of on time actions
• Utilization / liquidation efforts on Excess inventory

Inventory Management

• Analyze & define Reorder level
• Achieve adequate inventory management by suggesting nearest alternative available in excess, cost effective, alternates (makes).
• Compliance
• Ensure SOP compliance & resolve points / queries raised
• MIS
• Review of Pending PO report on weekly basis & PO Vs GRIR report on monthly basis
• Update Goals & Achievement Folder for KRAs on weekly basis

Minimum Requirements:

• 5 years of experience
• Bachelor's degree in supply chain management or in mechanical engineering or electrical engineering
• Proficiency in MS Office, ERP SCM
• Troubleshoot supply chain issues by reviewing available options, identifying root causes, and implementing the most effective corrective actions.
• Proven capability to manage multiple priorities and deliver results within demanding timelines.
• Ability to take ownership of assigned tasks and work independently with minimal supervision.
• Proven team player who contributes positively to team culture, communication, and shared goals
• Negotiation and Analytical skills
• Proactive thinking and forecasting skills
• Periodic travel to suppliers along with client sites