What Is A Remote Controller Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

SUMMARY OF POSITION:

The Engineering & Programming Technician works independently throughout the manufacturing plant to analyze, modify, and build control systems to improve safety, quality, delivery, and productivity of equipment and facility systems. Additionally, this individual may be called upon to assist in troubleshooting machine issues, to implement safety, quality, and productivity projects, and to introduce new products and processes. This individual will be responsible for identifying and implementing opportunities that are machine and process related that can be improved through the use of technology. They will need to coach and mentor others within the manufacturing plant in their areas of expertise. This position works with other technicians, tool room personnel, planners/schedulers, engineers, department managers, and operators during the analysis, build, and implementation phases of various projects. This individual will also work with the MES systems group to ensure that Pella control systems standards are applied and maintained.

PELLA CORPORATION REQUIREMENTS:

· Pass drug screen

· Pass pre-work vision screen

· Pass pre-employment tests

· Pass pre-work ability screen

ENVIRONMENT:

· Noise level requires hearing protection in designated areas

· Seasonal high temperatures and humidity

· Work in a team environment with the ability to communicate in a concise, polite and respectful manner

ESSENTIAL RESPONSIBILITIES:

§ Flexibility of work hours including mandatory OT when business needs requires.

§ Ability to safely work with and around moving equipment

§ Ability to communicate in a concise, polite and respectful manner with team members.

§ Regular / dependable attendance consistent with attendance guidelines is required.

§ Must comply with safety, quality, and production requirements and procedures.

§ Must maintain good housekeeping.

§ Design and implement controls for new and existing machines or processes using a variety of hardware components which include PLC’s, HMI’s, CNC’s, PC’s, motion controllers and standard industrial controls.

§ Ability to assist with the building of machines, tools, fixtures, jigs, and templates, as well as the project management of all of these.

§ Extensive knowledge of Programmable Logic Controllers (PLCs) and computers are required.

§ Must independently write, analyze, and modify PLC programs.

§ Ability to assist in maintaining all models and series of PLCs currently in use.

§ Maintain backup copies of PLC programs used in production and facility related equipment.

§ Develops electrical estimates for time, cost, and quality for projects.

§ Must have ability to work with data downloads.

§ Ability to establish and maintain machine settings for data downloads and collaborate with IT to set up or modify settings for data downloads.

§ Ability to troubleshoot and assist maintenance efforts when needed.

§ Ability to perform PM inspections on equipment.

§ Ability to obtain the appropriate PIV license.

§ Ability to work on ladders and vertical lifts when required.

ADDITIONAL RESPONSIBILITIES:

§ Other duties may be assigned.

§ Manage project related to improving equipment and facility using technology

§ Provide training to others on areas of expertise

EDUCATION AND EXPERIENCE:

§ Recommended that this individual has completed or is enrolled and seeking a 2 or 4 year degree in a related field of expertise.

§ Manufacturing-related experience is preferred.

§ Job specific experience is preferred.

§ Maintenance progression completion preferred.

SKILLS AND TALENTS: (*skills are required prior to entry into the position)

§ Decision making / problem solving in a manufacturing environment with minimal supervision.*

§ Ability to suggest process improvements and resolve problems.*

§ Must be self motivated, technically minded, and have good hands-on-ability.*

§ Excellent communication skills and the cognitive ability to learn the safety, quality, and productivity standards.

§ Ability to provide training to improve and maintain the programming knowledge of technical employees.

§ Organizational skills and time management skills to manage projects.

§ Knowledge of computer software such as AutoCAD, CMMS, and Microsoft Office required.

§ Ability to diagnosis and repair electrical, mechanical, pneumatic, and hydraulic problems.

§ Ability to work with sawdust system, compressed air, oxidizers, steam boiler, and electrical distribution systems.

§ Flexibility to travel.*

FACTORY SKILLS CLASSES PREFERRED

§ Industrial Math

§ Measurement Technology

§ Algebra/Trigonometry

§ Product Terminology

MAINTENANCE TRAINING PREFERRED

§ Basic Electricity

§ Motor Control I & II

§ Class B Electrician

§ Beginning Programmable Controllers

§ Pneumatics/Hydraulics

§ Advanced PLC

§ Maintenance Blueprint Reading

§ AutoCAD

PHYSICAL REQUIREMENTS:

· Lift up to 100 lbs. at waist level and up to 70 lbs. at shoulder level up to an occasional basis when moving products

· Push or pull with up to 100 lbs. of force up to an occasional basis when moving products

· Generate up to 90 lbs. of grip strength up to an occasional basis with each hand while handling products

· Generate up to 15 lbs. of pinch strength up to an occasional basis with each hand while handling products

· Display average coordination with both hands up to a continuous basis while performing job tasks

· Perform elevated work up to an occasional basis when handling products

· Stoop, kneel or squat up to an occasional basis when handling products

· Reach forward and to the side up to a frequent basis when handling products

· Stand up to a continuous basis and walk up to a frequent basis during the course of each shift

· Able to perform repetitive tasks up to 12 hours per day

Electronics Technician / Electronics Specialist Orangeburg, SC

COMPANY PROFILE:

• Company is over 140 years old
• Orangeburg facility is one of 6 manufacturing sites for this company in the US and is the newest plant in the system / Climate controlled / Non-Union
• Our client services a variety of industries including Electric Utility, Oil & Gas, Chemical, Military Bases, Railroad, Hospitals, Transit, Pulp and Paper, and more
• Committed to a high level of customer service and maintaining an exceptional reputation

WHAT THIS COMPANY OFFERS YOU:

All the benefits and the strong compensation that you would expect from an employer of this caliber including:

• Medical / Dental Plan
• OT Eligible
• Prescription coverage Plan
• Company Paid Short Term Disability and Life
• 401k with Match
• Education Reimbursement
• 2 weeks’ vacation to start and 10 paid holidays and 1 paid anniversary day off
• Exceptional Work Environment

THE ROLE YOU WILL PLAY:

The Electronics Specialist is responsible for solving problems not resolved by plant electricians. This includes working closely with electricians to resolve problems and requires mechanical knowledge of the equipment. This position reports directly to the Plant Engineering Manager.

• Program, maintain, troubleshoot, and repair Programmable Logic Controllers utilizing PC and manufacturer’s programming software. Recognize and correct potential problems in programs on new equipment installs as well as streamline programs for maximum efficiency and safety.
• Install, calibrate, troubleshoot, and repair process instrumentation and control equipment such as PID loop controllers, I/P and E/P converters, pressure transducers, and pneumatic actuators
• Maintain, calibrate, and repair electronic scales and other ingredient weighing devices to include documentation to ensure ISO 9000 requirements are met.
• Setup, program, troubleshoot and repair variable speed AC and DC drive systems and related instrumentation and control equipment such as tach generators, pulse encoders, strain gauges, and dancer control systems.
• Install, maintain, troubleshoot, and repair Process laser micrometer measuring equipment and associated instrumentation and control equipment
• Assist Facilities Engineering in specifying, installing, and commissioning of new equipment.
• Assist Process Engineering and Production personnel on implementation of processes and design changes.
• Communicate with vendors for repair/purchase of equipment.

BACKGROUND PROFILE:

• Associates Degree or higher in Industrial Electronics Technology or similar
• Allen Bradley PLC Programming Experience
• 5 years or more experience
• Good computer Skills related to machinery control. HMI, PLC Programming, Ladder Logic
• Working knowledge of word processor programs and spreadsheets (MS Word and Excel)
• Working knowledge of related test equipment (oscilloscope, Multimeter, recorders, megohmmeter, digital low resistance OHM meters, etc.)
• Ability to work independently or as part of a team.

• Competitive Base Salary!
• Extremely Competitive Equity Package!
• Flexible Work Schedules!
• Accelerated Career Growth!

Site 2020 Inc has an immediate opening for a Field Integration Trainer, specifically focused on our Deployment and Integration technology. In this role, you will support our local traffic control partners in your area, as well as travel to other areas of the country and Canada, roughly every second week to provide onsite training to new and existing clients.

Responsibilities

· Train Traffic Controllers on this disruptive and lifesaving technology

· Field customer service calls

· Communicate regularly with your direct supervisor to notify him or her of any potential issues, including but not limited to those relating to your job, or those relating to the client

· Create strong client relationships and be their first point of contact for all product related issues

· Translate training requirements into each client and monitor them during the duration of the training

· Assess training effectiveness to ensure incorporation of taught skills and techniques into the client’s employees work behavior

· Periodically evaluate past trainees to ensure product knowledge is current

· Periodically preform mechanical repairs to units

· Be involved in projects outside of the realm of training

Requirements and skills

· Good communication skills

· Be somewhat mechanically inclined

· Proven strong customer service

· Proven experience in conducting training classes

· Sound decision making and organizational skills

· Ability to travel 50%-75%

· Valid driver’s license

· Valid passport (international travel)

· Traffic Control Experience is an asset but not required

Job Type: Full-time

Position Summary

The HR Operations Specialist is responsible for maintaining the smooth day-to-day operations of the office, supporting the finance department, to include weekly payroll processing, administrative tasks, and providing HR support as needed under the guidance of the Chief People Officer. This position requires attention to detail, confidentiality, and strong organizational skills to ensure accuracy and consistency in office and payroll operations.

Key Responsibilities

Office Administration

• Serve as the first point of contact for incoming calls and visitors.
• Maintain office and kitchen supplies; track inventory and reorder as needed.
• Coordinate incoming and outgoing mail, deliveries, and courier services.
• Manage copier meter readings, toner inventory, and vendor communication.
• Organize company files, forms, and records (both paper and electronic).
• Maintain office supplies, equipment, and vendor relationships; track inventory and reorder as needed.
• Ensure meeting spaces are prepared and equipped for internal and external meetings.

Payroll Administration

• Collect, verify, and enter weekly employee hours into the payroll system.
• Process weekly payroll accurately and on schedule.
• Maintain payroll files, employee pay rate lists, and other related documentation.
• Prepare certified payroll reports for applicable projects.
• Assist with payroll-related reporting such as union reports, deductions, and garnishments.
• Maintain confidentiality of all payroll and employee information.

HR Support

• Assist with new hire onboarding paperwork (W-4, I-9, direct deposit, etc.).
• Maintain employee files and ensure documentation is complete and organized.
• Update employee lists and organizational data as directed.
• Support benefits enrollment or changes under guidance from the Chief People Officer.
• Assist with compliance tracking (certifications, training records, etc.) as assigned.
• Assist with filling HR documents and work closely with HR on daily operations and provide additional HR support as needed.

General Support

• Assist with invoicing or accounts payable data entry as needed.
• Coordinate communication between departments when requested.
• Be available to support the team with unexpected, time-sensitive tasks and initiatives that arise outside of standard operation.

Qualifications

• 3+ years of office administration experience; experience in payroll preferred.
• Basic understanding of HR functions and confidentiality standards.
• Proficiency in Microsoft Office and QuickBooks (or similar accounting software).
• Strong organizational and communication skills.
• Ability to prioritize and manage multiple tasks in a fast-paced environment.

Reporting Structure

Reports directly to the Controller. Works closely with the Chief People Officer for HR-related tasks and supports the Finance department as needed.

Job Location: 275 Rex Blvd Auburn Hills MI 48326

Position Type: Direct Hire

Job Title: Purchase Buyer

Minimum Requirements:

• 5 years of experience
• Bachelor's degree in supply chain management or in mechanical engineering or electrical engineering
• Proficiency in MS Office, ERP SCM
• Troubleshoot supply chain issues by reviewing available options, identifying root causes, and implementing the most effective corrective actions.
• Proven capability to manage multiple priorities and deliver results within demanding timelines.
• Ability to take ownership of assigned tasks and work independently with minimal supervision.
• Proven team player who contributes positively to team culture, communication, and shared goals
• Negotiation and Analytical skills
• Proactive thinking and forecasting skills
• Periodic travel to suppliers along with client sites

Job description:

• Our company is seeking a motivated Purchase Buyer to join our team. As the purchase buyer, your primary responsibility will be to follow & maintain Purchase SOP, be accountable for routine executions, cost control & escalations. Be responsible for domestic & International Sourcing for Automation and Logistic Automation and for developing domestic and global supplier base and monitoring supplier accounts payables.
• Commodities to be handled by team such as PLCs, Industrial PCs, Sensors, Switchgear, Scanners, Light Curtain, Cables, Cords, controllers, vision system, IT purchase, Pneumatics, Hydraulics, Motors, Gearbox, Servo, Screw Jacks, Tools, Bearings, chains & sprockets,Aluminum Extrusions, Hand tools, Hardware, Manufacturing (Machining & Fabricated items including surface finish like painting or Powder coating.
• Sourcing of Global & Local Trade / Labor for in-house & on-site installation & commissioning

Job responsibilities:

Supplier Management & Review

• Review & evaluate Suppliers' business account of Class 'A' & 'B'
• Alternate sourcing / ensure development of substitute for each commodity Procurement
• Review Indent, prioritize urgencies & initiate procurement process Ontime Procurement at optimum cost
• Resolve queries related to procurements with Stores & Accounts on daily basis
• Responsible for Procurement of Capex & maintain & monitor compliance record of on time actions.
• Utilization / liquidation efforts on Excess inventory

Inventory Management

• Analyze & define Reorder level
• Achieve adequate inventory management by suggesting nearest alternative available in
• excess, cost effective, alternates (makes).
• Compliance
• Ensure SOP compliance & resolve points / queries raised
• MIS
• Review of Pending PO report on weekly basis & PO Vs GRIR report on monthly basis
• Update Goals & Achievement Folder for KRAs on weekly basis

Organization Description:

Make a meaningful difference in the lives of Oakland youth. At Boys & Girls Clubs of Oakland (BGCO), our mission is to develop our community’s youth into positive contributors to society. We provide programs and services tailored to the needs of today’s youth while complementing the efforts of families, schools, and other community-based organizations.

We aim to ensure that every young person has the opportunity to reach their full potential as goal-oriented, responsible, and productive members of society. BGCO currently serves nearly 2,000 youth across three Clubhouse locations in Oakland, providing outcome-driven programming in three key areas: Academic Success, Good Character & Citizenship, and Healthy Lifestyles.

We value people, professionalism, initiative, integrity, responsibility, and teamwork.

This position will be based at the following Clubhouse:

Anna Marie Whalen Branch

3300 High Street, Oakland, CA 94619

Employment Details

• Status: Part-time
• Hours: After-school hours: 4-8pm; summer and school break hours: 11-3 or 12-4
• Pay: $25 / hour
• Benefits: Paid sick leave, training opportunities

Job Summary:

The Music Studio Director (Part Time) is responsible for planning, implementing, and evaluating a high-quality music program that teaches modern music production and performance, with a strong emphasis on rap and hip hop. This role guides youth through beat making, songwriting, vocal recording, mixing, and basic release planning while modeling and maintaining a safe, respectful, and creative studio culture.

Primary Responsibilities:

Program Development & Instruction:

• Teach core music production skills including beat making, sampling, MIDI programming, arrangement, vocal tracking, basic mixing and mastering, export, and delivery.
• Create and mix rap and hip hop music with youth, including instruction on flows, hooks, verse structure, ad libs, punch-ins, comping, and basic tuning.
• Instruct youth on Digital Audio Workstations (DAWs) such as Pro Tools, Logic Pro, or Ableton Live.
• Teach proper use of studio hardware including audio interfaces, microphones, MIDI controllers, studio monitors, and headphones.
• Lead audio and video projects that support BGCO goals and result in finished tracks, EPs, or other creative outputs.
• Design engaging classes, workshops, and a culminating showcase of youth work.

Studio Operations & Administration:

• Oversee day-to-day studio operations, including scheduling, equipment care, troubleshooting, and overall studio readiness.
• Plan annual class calendars and ensure program policies are current and followed.
• Maintain attendance, registration, and project records for participants.
• Manage routine administrative needs related to the music studio program.

Youth Engagement & Collaboration:

• Recruit and retain program participants and support consistent attendance.
• Attend team meetings, support organizational events, and contribute to program strategy.
• Collaborate with site leadership, program staff, and development staff to align on goals and media needs.

Additional Responsibilities:

• Support special programs and events as assigned.
• May be required to drive a Club van if authorized.
• Consult with parents or caregivers when appropriate.
• Perform other duties as assigned.

Relationships:

• Internal: Daily interaction with Branch leadership, program staff, and development staff to align on programming goals and media needs.
• External: Engagement with volunteers, guest artists, and donors as approved.

Qualifications:

• Demonstrated, hands-on experience creating and mixing rap and hip hop music.
• Proficiency with at least one professional DAW such as Pro Tools, Logic Pro, or Ableton Live.
• Practical knowledge of microphones, preamps, audio interfaces, MIDI controllers, and studio monitors, with the ability to set up, operate, and maintain equipment.
• Experience working with teens in creative or educational environments.
• CPR and First Aid certification required or obtained within 60 days of hire.
• Background check and TB clearance required prior to working with youth.
• Valid driver’s license and acceptable driving record if driving is assigned.

Manufacturing Yard Planning & Inventory Manager

Position Summary

The Manufacturing Yard Planning & Inventory Manager is responsible for planning, controlling, and optimizing raw materials, work-in-progress (WIP), and finished goods inventory-including steel coils, plates, and pipe products—across yard and storage operations.

This role ensures safe, efficient, and cost-effective material flow, supports uninterrupted production, and improves yard utilization, inventory accuracy, and dispatch readiness in alignment with production schedules, logistics requirements, and customer delivery commitments.

Key Responsibilities

Yard Planning & Layout Management

• Develop and maintain optimized yard layouts for steel coils, plates (LSAW and specialty grades), pipes (HFI / ERW / LSAW), finished goods, and dispatch zones.
• Ensure efficient movement of materials from storage to production with minimal handling and congestion.
• Coordinate stacking, segregation, and accessibility based on grade, size, and production priority.

Inventory Management & Control

• Own inventory accuracy for raw materials, WIP, and finished goods.
• Maintain real-time inventory visibility using ERP and WMS systems.
• Lead cycle counts, physical inventories, and variance resolution.
• Ensure FIFO compliance, heat traceability, and proper material identification.

Production & Dispatch Coordination

• Partner daily with production planning, coating, quality, and logistics teams.
• Ensure timely availability of materials to support production schedules.
• Support truck, rail, and barge dispatch activities.
• Prevent production delays caused by material shortages or misplacement.

Yard Operations & Safety Leadership

• Enforce safety standards for crane operations, forklifts, and heavy material handling.
• Ensure compliance with OSHA and internal safety policies.
• Conduct safety audits and implement corrective actions.
• Promote a strong, zero-incident safety culture.

Systems, Reporting & Continuous Improvement

• Use ERP/WMS tools to track inventory movement, aging, and dwell time.
• Develop and monitor KPIs related to inventory accuracy, yard utilization, damage, and dispatch performance.
• Lead Lean, 5S, and continuous improvement initiatives.
• Support automation and digital improvement efforts within yard operations.

Team Leadership

• Lead yard planners, inventory controllers, and yard supervisors.
• Set performance expectations, accountability, and development plans.
• Train teams on safety standards, systems, and best practices.

Qualifications & Experience

Education

• Bachelor’s degree in Supply Chain, Industrial Engineering, Logistics, or a related field.

Experience

• 7–12+ years of experience in yard operations, inventory control, or manufacturing logistics.
• Background in steel, pipe, or heavy manufacturing environments.
• Hands-on experience with steel plates, coils, and large-diameter pipe.
• ERP system experience (SAP preferred).
• Familiarity with rail, truck, and barge logistics.

Key Competencies

• Strong operational planning and execution skills
• Deep understanding of steel plate and pipe handling
• Safety-first leadership mindset
• Data-driven decision making
• Strong communication and people leadership skills
• Continuous improvement focus

Key Performance Indicators

• Inventory accuracy ≥ 99%
• Zero production delays due to material availability
• Reduced material handling and rehandling
• Improved yard utilization
• Reduced damage and demurrage
• On-time dispatch performance