Us Navy Periscope Controller Jobs in Usa

This role exists to lead a high-performing service operation that delivers operational excellence, customer trust, and measurable growth. The Service Manager ensures that every technician hour is purposeful, every customer interaction builds long-term loyalty, and every team member grows in capability and accountability.

This is not a maintenance oversight position. It is a leadership command responsible for performance, culture, safety, and revenue within the service department.

The previous Service Manager was promoted — a signal that performance is recognized and advancement is real.

Within the first 12 months, the Service Manager will:

• Lead, mentor, and develop service team members to achieve operational and customer service excellence.
  

• Recruit and retain top technical talent.
  

• Conduct structured performance coaching and evaluations.
  

• Foster a culture of accountability, professionalism, and continuous improvement.
  
  

• Ensure consistent, timely, high-quality service delivery.
  

• Build strong long-term customer relationships.
  

• Resolve complex service issues with practical, value-driven solutions.
  

• Prepare and deliver accurate service quotes.
  
  

• Drive service revenue through strategic labor utilization.
  

• Collaborate with sales and operations teams to identify growth opportunities.
  

• Expand service customer base while improving retention rates.
  
  

• Analyze shop capacity, technician productivity, and workflow efficiency.
  

• Coordinate scheduling to meet operational deadlines.
  

• Oversee warranty claims and ensure proper reimbursement.
  

• Maintain a safe, clean, secure facility environment.
  

• Prepare weekly and monthly performance reports.
  
  

This role is built for a leader who:

• Takes ownership beyond job description
  

• Sees systems, not just tasks
  

• Leads with clarity and accountability
  

• Values long-term relationships over short-term fixes
  

• Builds teams that outlast individual tenure
  

If you are a service operations leader who believes performance and culture go hand in hand — and you are ready to command a department with measurable impact — this is your opportunity to lead.

• Must have served in the U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force, U.S. Coast Guard, U.S. Space Force, U.S. Reserves, or U.S. National Guard.
  

• Proven Service Manager experience required; industry experience strongly preferred.
  

• Minimum 4+ years of leadership experience managing teams and operational performance.
  

• Demonstrated ability to sell labor and manage service revenue at the management level.
  

• Strong communication skills.
  

• Able to lead technicians, collaborate cross-functionally, and resolve customer concerns.
  

• High organizational discipline with the ability to prioritize and manage multiple moving parts.
  

• High school diploma or GED required; college degree preferred.
  
  

• Employee Stock Ownership Plan (ESOP)
  

• 401(k) Retirement Plan
  

• Health, Dental, Vision
  

• Flexible Spending Accounts
  

• Paid Training
  

• Paid Holidays & Vacation
  

• Company Paid Telehealth Program
  

• Corporate Chaplain Program
  
  

Service Technician

$70,000 – $80,000 Base Salary + Overtime

Extensive Weekday Travel (Up to 80%) – Home Weekends

OEM Training + Career Advancement

Health / Vision / Dental

401k

Our client is a leading global OEM in environmental and climate systems, seeking a skilled Field Service Technician to support installations and service of their advanced humidification, dehumidification, and control equipment across the U.S.

This role requires extensive weekday travel (up to 80%), with technicians typically home on weekends. Overtime is available and regularly earned, adding to total compensation. You'll receive factory training, work with innovative proprietary systems, and join a company known for long-term employee development and technical excellence.

The ideal candidate will have a solid mix of mechanical and electrical experience, particularly in HVAC, PLC controls, or related systems. Military-trained technicians are strongly encouraged to apply.

Key Responsibilities

• Commission, install, and maintain OEM humidification and water treatment systems
• Troubleshoot PLC-based control systems, valves, sensors, and mechanical components
• Travel nationwide up to 80% during weekdays (Monday-Friday); home weekends
• Perform diagnostics and repairs independently on a wide range of systems
• Operate and maintain a company service vehicle and parts inventory
• Submit accurate service reports, timesheets, and expense documentation
• Deliver professional and responsive customer service while on-site

Background Requirements

• Hands-on experience with mechanical, electrical, or HVAC systems
• Knowledge of PLC troubleshooting, control systems, or instrumentation preferred
• Prior work in industrial or manufacturing settings a strong plus
• Military technical experience highly valued (Navy, Air Force, Army, etc.)
• Ability to read schematics, wiring diagrams, and technical manuals
• Valid driver’s license; able to travel by car and air
• Able to lift 50 lbs. and work in commercial/industrial environments

Position Title: Assistant Labor Superintendent

Reports To: Labor Superintendent

Position Summary: The Assistant Labor Superintendent will manage and oversee labor employees, as directed by the Production Manager. Responsible for, scheduling, coordinating manpower, materials, and equipment as well as managing subcontractors. Must be able to communicate effectively and work with other departments and agencies to ensure staffing needs are met accordingly.

Pacific Shipyards International, LLC. Expectations of Employee:

• Is committed to the company values and adheres to all policies and procedures
• Perform duties of his/her job and as assigned by Management
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully
• Communicates regularly with Officers, managers & Supervisors about the different divisions and

department’s issues

• Consistently be on time for work, meetings and appointments and deliver work projects by assigned due dates
• Maintain assigned work areas in a clean and orderly fashion
• Maintain and ensure the safety of all assigned equipment
• Perform all duties in conformance to appropriate safety and security standards
• Meet productivity goals and quality standards as set by management
• Ability to handle multiple tasks and balance priorities

Essential Duties & Responsibilities:

• Ensure timely and cost-efficient completion of projects and jobs
• Establishes a safe working environment and enforces established safety policies as outlined by company policy OSHA, HIOSH, state and federal laws, and EPA
• Estimate time, manpower, and materials required for assigned jobs
• Determines workforce staffing to maximize efficiency and beat project estimations and deadlines
• Works with other departments to move personnel from project to project to maximize resources
• Prepares various forms and reports for review
• Communicates with internal and external customers, contractors, and subcontractors to build and maintain solid relationships
• Advises Production Manager on the status of all assigned projects, potential obstacles, and delays and plans to minimize impact and beat project goals
• Problem solver – seeks solutions to problems that ensure compliance within established guidelines without exceeding budget and maximizing company and customer satisfaction
• Ability to process information quickly and follow through with a course of action.

Other Duties/Functions:

• Operate and use various office equipment, computers, cell phone, fax copy machine
• Promote teamwork and a safe, positive working environment
• Research and utilize industry production and safety best practices
• Instruct team members on the use of equipment and tools
• Evaluate team member performance and correct as necessary
• Comply with the requirements of the CBA

Education/Training:

• High school diploma or equivalent
• Prior experience in the maritime industry preferred
• Experience with US Navy ship repair/NAVSEA regulations
• Proficient in MS Word, Excel, Outlook, and Internet Explorer

Qualification/Requirement:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.
• All candidates must submit to and pass a post-offer drug screening and a background check before employment begins. Failure to complete any of these steps will result in disqualification
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift

Position Title: Assistant Electrical Superintendent

Reports To: Electrical Superintendent

Position Summary: The Assistant Electrical Superintendent executes the day-to-day operations within the electrical department as directed by the Electrical Superintendent. Responsible for safety, quality, schedule and budget of all assigned work. Assists in the planning, managing, and execution of electrical projects and repairs in production with applicable departments, personnel, and customers. Assist in the department’s development in trade skills and workmanship. Assist in organizing and managing the primary duties of the Marine Electrician which include the installation, test, and repair or marine cables and equipment, installation and connection of lighting, electrical power, troubleshooting and repair of shipboard and facilities electrical systems. Must be able to read blueprints, drawings, and schematics.

Pacific Shipyards International, LLC Expectations of Employee:

• Is committed to the company values and adheres to all Pacific Shipyards’ policies and procedures
• Perform duties of his/her job and as assigned by Management
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully
• Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department’s issues
• Consistently be on time for work, meetings, and appointments and deliver work projects by assigned due dates
• Maintain assigned work areas in a clean and orderly fashion
• Maintain and ensure the safety of all assigned equipment
• Perform all duties in conformance to appropriate safety and security standards
• Meet productivity goals and quality standards as set by management
• Ability to handle multiple tasks and balance priorities
• Computer proficiency in Microsoft Office

Essential Duties & Responsibilities:

• Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes
• Connect wires to circuit breakers, transformers, or other components
• Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of the system
• Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps
• Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes
• Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes
• Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem
• Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures
• Advise management on whether continued operation of equipment could be hazardous
• Maintain current electrician's license or identification card to meet governmental regulations
• Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes
• Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures
• Repair or replace wiring, equipment, or fixtures, using hand tools or power tools
• Install ground leads and connect power cables to equipment, such as motors
• Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools
• Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment
• Fasten small metal or plastic boxes to walls to house electrical switches or outlets
• Construct or fabricate parts, using hand tools, according to specifications
• Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects
• Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles
• Provide preliminary sketches or cost estimates for materials or services

Education/Training:

• 3 years or more in the Marine Electrical field
• Experience with US Navy Ship repair/NAVSEA regulation is required
• BS Electrical engineering degree
• Heavy Civil construction experience
• PLC and VFD experience A MUST
• Working knowledge of IT as it relates to electrical controls
• Ability to multi-task, prioritize and handle deadlines
• Ability to troubleshoot electrical systems;
• Extensive knowledge of MS Office and AutoCAD
• Ability to use Microsoft Product such as Word, excel, and adobe
• Excellent verbal and written communication skills

Qualification/Requirement:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites
• All candidates must submit to and pass a post -offer drug screening and background check before employment begins. Failure to complete any of these steps will result in disqualification
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift

Operations Support Specialist 4 (D&D / Construction – Nuclear)

Los Alamos National Laboratory (LANL) – TA-55 PF4

$70/hr – $80/hr + Per Diem Available

Schedule: 4x12s (aligned with construction activities)

Clearance: Ability to obtain DOE Q Clearance required

Duration: Up to 5 years (long-term opportunity)

Position Overview

We are seeking a senior-level Operations Support Specialist 4 (OSS 4) to support Decontamination & Decommissioning (D&D) and construction operations within a Hazard Category 2 nuclear facility at LANL.

This role is ideal for a high-level construction leader who can operate beyond traditional project execution—someone who can anticipate risk, coordinate multidisciplinary teams, and ensure safe, compliant delivery of complex nuclear work.

You will serve as a key interface between facility operations and construction teams, ensuring work is executed safely, efficiently, and in compliance with DOE standards.

What We’re Targeting (Top Candidate Profile)

• Strong construction management experience in DOE or nuclear environments
• Proven ability to lead field teams in high-hazard radiological facilities
• Experience supporting D&D, facility modifications, or nuclear construction projects
• Ability to see ahead, anticipate issues, and drive execution proactively
• Background in DOE, NNSA, or highly regulated industries (Navy Nuclear, oil & gas, etc.)

Key Responsibilities

• Lead and oversee construction and D&D operations in a CAT II nuclear facility
• Ensure safe, compliant, and timely execution of all project deliverables
• Coordinate across engineering, operations, work control, and subcontractors
• Provide technical oversight and direction to field teams and project personnel
• Manage budgets, schedules, and performance tracking
• Ensure compliance with DOE regulations, NQA-1, and Laboratory standards
• Develop and improve processes, documentation, and operational workflows
• Serve as a key decision-maker in resolving complex field issues

Required Qualifications

• Bachelor’s degree in Engineering, Construction, or related field (or equivalent experience)
• Minimum 8+ years of relevant experience in construction or operations
• Demonstrated experience:
• Leading construction teams in nuclear or highly regulated environments
• Supporting field execution, work control, or project operations
• Working in complex, high-risk environments with multiple stakeholders
• Ability to obtain and maintain DOE Q Clearance

Highly Desired (Will Set You Apart)

• 15+ years of construction experience (strongly preferred)
• DOE / NNSA project experience (5+ years preferred)
• Experience in D&D projects or nuclear facility modifications
• Previous qualifications as:
• Field Work Supervisor (FWS)
• Responsible Line Manager (RLM)
• Experience working in plutonium facilities (TA-55 / PF4)
• Strong understanding of NQA-1, quality assurance, and compliance frameworks

Core Competencies (What Hiring Managers Care About)

• Ability to lead and coordinate construction teams in radiological environments
• Strong communication skills (written & verbal)
• Excellent time management, tracking, and execution discipline
• Proactive mindset—anticipates issues before they impact execution

Additional Details

• Location: TA-55 PF4 (Plutonium Facility), LANL
• 100% onsite role in a secure nuclear environment
• Per diem available for qualified candidates
• Long-term, mission-critical work supporting D&D and construction operations

Deal Breakers

• No experience managing construction activities in DOE CAT II or NRC nuclear facilities

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

• 
  
• Operate 3 or 4 axis machining centers to perform precision machining operations
  
• Participate in continuous improvement activities.
  
• Analyze data and production reports
  
• Review samples, drawings or instructions to understand specifications of output
  
• Plan the sequence of necessary actions for the completion of a job
  
• Take measurements and mark material for cutting or shaping
  
• Select appropriate machines (e.g. lathes) and position or load material for a job
  
• Determine and program size of batches, speed of machine etc.
  
• Monitor machine while working to adjust the feed, maintain temperature and identify issues
  
• Check output to ensure consistency with specifications and discard defects
  
• Keep records of approved and defective units or final products
  
• Set-up and operate manual and CNC machines to manufacture parts to meet engineering blueprints.
  
• Work closely with CNC programmer to ensure that programs manufacture parts that meet drawing specifications.
  
• Support maintenance of tooling, identifying tooling needs and sharpening tooling as necessary
  
• Operation of one or more CNC machines under the direction of supervisors
  
• Minor maintenance on machines
  
• Load programs and perform simple edits as needed
  
• Adhere to company Malpractice & Ethics Policies
  

• 
  
• High School Diploma (Preferred) or GED
  
• Reliable transportation to and from work
  
• Manual and/or CNC Machining Experience
  
• 3 axis CNC Millsa plus
  
• G&M Code editing a plus
  
• Must be able to use indicators and setting starting coordinates
  
• Use of basic measuring tools
  
• Understand X,Y,Z coordinates
  
• Ability to set up machine and operate it independently (change cutters) adjust speeds, feeds and edits
  
• Troubleshooting skills a plus.
  
• Must be able to lift 30 lbs.
  
• Minimum of 3 years of machining experience. Experience on CNC Mills, Manual Lathes and Mills is preferred.
  
• Ability to interpret shop drawings, layouts and sample parts to determine dimensions and tolerances of finished work pieces, sequence of operation, and set-up requirements
  
• Experience using calipers, micrometers, gauges and other precision measuring instruments is required
  
• Strong attention to detail
  
• Ability to troubleshoot
  
• Fanuc experience is preferable
  
• Good coordination, motor skills, and dexterity
  
• Maintain a clean and safe work environment.
  
• Ensures that all safety procedures are followed as stated on posted signs and in Company policy
  
• Creative thinking and idea generation
  
• Significant manufacturing experience
  
• Ability to communicate information clearly
  
• Ability to collaborate with others and work independently
  

US-ME-Bath

Type: Regular Full-Time

Category: Manufacturing

Salary Grade: ..

Shift: ALL

Overview

The pay range for this position ranges from $30.04/hr - $33.36/hr. Install of ships equipment which includes general machinery, main machinery, weapons systems, remote operating gear etc. which involves layout, tacking, grinding, drilling, reaming, spot facing, bolting, torqueing, testing etc. (but not limited to). And/or Responsible for safely activating, testing and operating of ships, main propulsion and auxiliary systems in accordance with approved procedures, practices and policies. Responsible to comply with approved Departmental Operating Instructions. Read and interpret test memos. Participate in sea trials and work list ship systems to provide direction to the construction mechanics.

Responsibilities

High School Diploma or GED preferred. Experience using basic shop tools, tacking, hand tools, torqueing and portable drilling tools. 2 years Trade or Technical schooling in a mechanical field, or at least 3 years of experience working in a mechanical Field And/or Any of the following: Valid USCG engine license or QMED certification for steam, motor or gas turbine engines A minimum of 3 years Navy or Coast Guard experience in engineering position, minimum E4 pay grade A minimum of 3 years successfully operating and testing shipboard systems

Qualifications

Required - Must be able to read blueprints in detail. Required - Must be able to do layout, read measuring tools, tape measure, inside and outside micrometers, Vernier or dial calipers, and perform simple math calculations. Preferred - Knowledge of equipment alignment, machining, torqueing methods. Preferred - Gas Turbine operating experience Preferred - Hydrostatic flushing and testing systems. Required - Must meet the requirements of the O04 physical task analysis.