Uci Machine Learning Repository Iris Dataset Jobs in Usa

WE ARE CURRENTLY ACCEPTING APPLICATIONS FOR A 2ND SHIFT MACHINE OPERATOR AT NEW OXFORD CONTAINER FACILITY

RESPONSIBILITIES:

Set-up rails, print, and die cut section on Flexo accurately in accordance with proper setup techniques.

Inspect all dies before and after run to ensure that any necessary repairs are made before the next run.

Ensure all bolts for cutting dies are in place and tightly secured.

Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print. Check rolls for damage.

Maximize the utilization of equipment by operating the machinery at available capacity and speed.

Assist Operator, Assistant Operator and Utility with job duties on the machine.

Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data Machine Operational Status, Safety Data, Quality Data.

Turn in maintenance work orders to supervision for needed repairs.

Complete annual food packaging safety training.

Report any discovered food packaging safety risks or concerns.

Comply with all company policies and procedures, including safety and maintaining good housekeeping.

Adhere to production schedule and make recommendations for optimizing the schedule to meet cost, quality and service goals. Report any unusual scheduling issues to Supervisor.

BASIC QUALIFICATIONS:

High school diploma/GED.

Ability and willingness to work overtime on short notice, both during the week and weekends.

Ability to work in manufacturing environment, with varying temperatures.

Must be authorized to work in the U.S.

PREFERRED QUALIFICATIONS:

Experience in a packaging or other manufacturing environment.

6 months experience working on a Flexo machine.

KNOWLEDGE, SKILLS & ABILITIES:

Ability to work in a fast paced environment and handle multiple requests simultaneously.

Ability to work within a team and effectively communicate with members.

Triumvirate Environmental, one of the largest environmental services firms in North America, is seeking an (onsite) Processing Machine Operator for our Pennsylvania recycling operation. This position reports to Production Supervisor. The schedule is Monday through Friday, 4:00pm-2:30am.

This safety sensitive, detail oriented, and highly motivated individual will be responsible for operating different types of shredders and grinders. They will also be working closely with compounding (densifying) equipment.

Triumvirate Environmental provides leading organizations in the higher education, life sciences, healthcare, and advanced manufacturing sectors with diverse services and expertise to assist them with compliance management. At Triumvirate Environmental, we strive to WOW both our employees and our customers. Our unique culture fosters growth, development, education, and creativity.

Triumvirate Environmental is committed to social responsibility, focusing on environmental protection, sustainable development, and improving access to education and healthcare. Through our products, services, and corporate initiatives, we strive to make a positive impact, going beyond compliance to promote social good. Our dedication to sustainability and ethical standards drives our long-term success and strengthens relationships with stakeholders.

Essential Responsibilities:

• Identify and label different types of material properly.
• Use basic and power hand tools to remove unwanted metal and plastic from recycled plastics.
• Help drive sustainability by sorting different types of plastic and separating them to be used in the extrusion process.
• Identify when material is not melting properly, adjust temperatures, screw speed and ram settings as needed on compounder machines.
• Regular/Daily cleaning of work area and tools.
• Work efficiently and productively.
• Ability to multi-task.
• Stack material in a safe and efficient manner.
• Develop an understanding of OSHA regulations and Triumvirate's Health and Safety Practices.
• Respect and build a working relationship with co-workers.
• Must successfully complete on-the-job training.
• Ability to stand 8+ hours per day.
• Must be able to lift-up to 50lbs repetitively.
• Must be able to operate a forklift.
• Other duties as assigned.

Basic Requirements:

• High School diploma or equivalent.
• Ability to operate large precision shop machinery.
• Strong aptitude in problem solving and process improvement.
• Demonstrate the ability to articulate problems and solutions.
• Demonstrate a sense of urgency and personal initiative related to problem resolution duties with follow-through and professionalism.
• Self-motivated and capable of managing stressful situations.
• Must demonstrate a strong commitment to safety.
• Collaborate effectively with team members.
• Demonstrate openness to learning by adapting to new processes, incorporating constructive feedback, and taking initiative to develop skills and expertise.
• Must be able to lift 50 pounds repetitively.
• Ability to work overtime.
• This role is considered safety sensitive.
• Must have a reliable form of transportation.
• Must be eligible to work in the United States without future sponsorship.

Preferred Requirements:

• Previous manufacturing experience.
• Previous forklift experience.
• Manufacturing experience.
• Detail oriented.
• Works well with a team.
• Takes direction/criticism positively.
• Willingness to learn.

Work Environment:

• Manufacturing environment where hearing protection, safety glasses and steel toed boots are required.
• Large facility with approximately 100,000 square feet of ground to cover.
• Seasonal variation in temperature and weather conditions.
• Frequent radio communication with operators and managers.
• Teamwork-centered atmosphere with over 100 employees.

Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Besides Health, Dental and Vision Insurance, we contribute to a 401k, offer a generous tuition reimbursement program, TONS of safety training for some positions with opportunities for external trainings and certifications, Mentorship & Career Succession Planning, Relocation Opportunities, Auto/Home insurance discounts, pet assistance discount plans, discounted movie passes & more!

Triumvirate Environmental is committed to a diverse and inclusive workplace. As an Equal Opportunity Employer (EOE), Triumvirate does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individuals with Disabilities and Protected Veterans are encouraged to apply.

If you have a disability and need accommodation during the application and hiring process, please contact us at https:///contact or call us at 888-834-9697. The requirements listed above are representative of the knowledge, skill, and/or ability required. To view our California Privacy Notice and Policy, click here.

Pay Range: $19 - $20 USD

Perform routine and non-routine cleaning tasks along with other staff on Meltblown equipment assuring their ongoing cleanliness

Ability to set-up, operate and troubleshoot and/or make proper machine adjustments to the process to produce quality product that meets and/or exceeds customer expectations

Understand and be able to do basic upkeep and troubleshooting on the following equipment:

• Meltblown machines in total including all sub-systems
• TSI Testers
• Cutters
• Presses
• Resin drying equipment
• Resin mixing equipment
• Silo and sensor for silo depth

Collaborate with and support engineering from Neillsville and Stoughton with new processes and products

Directly engage engineering and maintenance in a timely manner to assist with issues

Assist in creation of documentation for existing and new processes and procedures

Properly complete all documentation within the department including quality records, maintenance logs, production logs, 5S scores, etc as directed

Understand and apply media specifications as needed to maintain product quality.

Assist in managing scrap amounts by promptly addressing causes of scrap including involving engineering or maintenance

Calibrate machines and testing equipment per schedule and as needed, perform quality test procedures as required.

Support and maintain OE initiatives throughout designated work area

Responsible for completing weekly and monthly Preventative Maintenance on equipment.

Apply all safety, quality, ITAR, and other plant processes and procedures to the products

Keep department organized and focused to meet production demands (5S Sort, Straighten, Shine, Standardize, Sustain)

Communicate effectively with department, maintenance, engineering, plant leadership, and any other co-workers

Demonstrated ability to perform critical job functions (as outlined above) and train new employees in the department.

Other duties as assigned by the team leader or manager

Ability to follow directions, read blueprints, job data sheets, safety instructions, etc

Good written and oral communication skills

Must be a quick learner with strong problem solving skills

Must be very adaptive to change and be an active change agent

Must be motivated and self-driven, able to work with minimal supervision

1-2 years experience working in a similar position is preferred

Must be able to walk/stand at least 75% of the time including during required overtime hours.

Must be able to lift up to 35 lbs

Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training.

Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material.

Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair.

Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development.

We are deliberately working towards a brighter future. Our daily actions consider what is important to our people, our customers and our planet. We are focused on performance, durability and sustainability to serve the world better.

Job Identification 1389

Job Category Manufacturing

Locations 1401 E Division Street, Neillsville, Wisconsin, 54456, US

• Machine Operation:
• Set up and operate grinders, including surface, cylindrical, or centerless grinders.
• Adjust machine settings, such as speeds, feeds, and tooling, to achieve the desired results.
• Quality Assurance:
• Measure and inspect finished parts using precision tools (e.g., micrometers, calipers, and gauges) to ensure compliance with blueprints and specifications.
• Identify and address any quality issues during the grinding process.
• Machine Maintenance:
• Perform routine maintenance and cleaning of grinding equipment to ensure optimal performance.
• Report any mechanical or technical issues to the maintenance team.
• Production Monitoring:
• Read and interpret work orders, blueprints, and technical drawings.
• Monitor grinding processes to maintain efficiency and minimize downtime.
• Safety Compliance:
• Follow safety protocols and wear appropriate personal protective equipment (PPE).
• Maintain a clean and organized work area to reduce hazards.
• Collaboration:
• Work closely with the production team, quality control personnel, and supervisors to meet production goals.
• Assist in training new operators as needed.

• Experience:
• Previous experience as a grinder operator or similar role in a manufacturing environment.
• Familiarity with different types of grinders (surface, cylindrical, centerless, etc.).
• Technical Skills:
• Proficiency in reading blueprints and technical specifications.
• Strong knowledge of grinding techniques and tool setups.
• Ability to use precision measuring instruments.
• Physical Requirements:
• Ability to lift heavy materials (up to 50 lbs) and stand for extended periods.
• Good hand-eye coordination and manual dexterity.
• Other Skills:
• Strong attention to detail and problem-solving skills.
• Ability to work independently or as part of a team.

AMI Construction's concrete division is growing, and we're seeking an exceptional Curb Machine Operator. This vital, hands-on role ensures we exceed customer expectations. We need a highly collaborative team player with a positive, can-do attitude and a strong commitment to expertly completing every project.

Job Responsibilities:

• Follow all safety and company policies.
• Create patterns, forms, or foundations per work order and inspect finished surfaces.
• Drive and guide the curb machine to extrude concrete along guidelines, ensuring correct shape, width, and base
• Set forms, assist with string lines, oversee pour, and spread concrete to level.
• Finish top surfaces to desired texture using tools and water.
• Work with crew members to exceed expectations and spread motivation.
• Stay updated on project knowledge with the management team.
• Report issues, material needs, and progress to supervisors
• Perform other assigned duties.

Skills Needed:

• The ability to operate a Curb and Gutter Machine is required.
• Minimum 2-3 years of concrete finishing/forming experience.
• Proficiency with industry tools and equipment.
• Available to work weekends.
• Valid Driver’s License.

Please click the following link to view our Curb and Gutter Machine:

Who we are looking for:

We are currently searching for a Coiler (Machine operator) to be based out of New Bedford, MA Duchaine Facility. Reporting to the Manufacturing Shift Supervisor, the operator will be responsible for operating machinery in the areas of coiling, packing and using simple measurement instruments to check work and completing paperwork required.

What you will do:

Machine Operator's responsibilities include, but are not limited to:

• 
  
• Read and comprehend production Standard Work and Job Function Analysis (JFA)
  
• Ensure production materials are available.
  
• Operate and observe machinery during production.
  
• Identify acceptable or unacceptable product quality to customer requirements and quality standards.
  
• Collaborate with co-workers, supervisors, and managers to achieve productivity and site goals.
  
• Adhere to all safety procedures and report potentially unsafe conditions immediately.
  

What you will bring:

• 
  
• High School diploma or equivalent education and experience strongly preferred but not required.
  
• Previous experience working in a manufacturing or industrial environment is strongly preferred.
  
• Ability to work in an environment with loud noises, smells and/or extreme temperatures at times.
  
• Basic Math skills required.
  
• Must have the ability to lift up to 70 lbs.
  
• Must be able to push, pull, bend, sit and stand without assistance.
  
• Good attendance and strong work ethic required.
  
• Must have the ability to understand and carry out verbal and written instructions in English.
  
• Ability to follow directions and complete work in a safe and efficient manner while producing a quality product.
  
• The ability to align with our core values - Accountability, Teamwork, Integrity, Respect and Excellence.
  
  

Within 3 months, you'll:

• 
  
• Complete any required training.
  
• Have developed relationships with the key stakeholders for this role.
  
• Be well-versed in Atkore's Business System and the importance of your role to daily operations.
  

Who we are:

Atkore is a four-time Great Place to Work certified company and a two-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values.

Join our team and align yourself with an industry leader!