Twp Sub Jobs in Usa

Job Description Summary

Under general supervision, the Certified Surgical Technologist III functions as a member of the operating room team to prepare sterile supplies and equipment used in the surgical procedures and perform appropriate room duties involved with direct patient care with adherence to established procedural guidelines at the advanced level. The Certified Surgical Technologist III demonstrates advanced knowledge and critical thinking skills required to provide care and/or service appropriate to the level of development of patients, with consideration of the needs of patients’ families.

Entity

Medical University Hospital Authority (MUHA)

Worker Type

Employee

Worker Sub-Type​

Regular

Cost Center

CC005406 COL - Labor and Deliver (NMC)

Pay Rate Type

Hourly

Pay Grade

Health-27

Scheduled Weekly Hours

36

Work Shift

Job Description

Entity/Organization:  MUHA (Medical University Hospital Authority/Medical Center)

 

Hours per week: 

 

Scheduled Work Hours/Shift: 

 

Fair Labor Standards Act Status:

 

Job summary:

Under general supervision, the Certified Surgical Technologist III functions as a member of the operating room team to prepare sterile supplies and equipment used in the surgical procedures and perform appropriate room duties involved with direct patient care with adherence to established procedural guidelines at the advanced level. The Certified Surgical Technologist III demonstrates advanced knowledge and critical thinking skills required to provide care and/or service appropriate to the level of development of patients, with consideration of the needs of patients’ families.

 

Required License Certification and Registration: Incumbent must hold and maintain the Certified Surgical Technologist credential administered by the National Board of Surgical Technology and Surgical Assisting, (formerly LCC-ST). If not certified, evidence of continuous employment in the state of South Carolina as a Surgical Technologist before January 1, 2008 is required. New graduates must obtain certification within 90 days of hire.

 

Basic Life Support required within 2 weeks of hire.  Thereafter, must maintain a Current Basic Life Support (BLS), either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider.

 

Minimum Experience and Training Requirements:

High school diploma.  Graduation from an accredited school of surgical technology or surgical technology military program. 

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. This role offers not only recognition but also a clear path for growth and development within our organization. If you're passionate about shaping the future of aerospace and defense, this is your chance to thrive in a dynamic and rewarding environment!

What You Will Do

• Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).

• Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.

• Interface with factory, program, and customer personnel to implement design improvements.

• Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior work experience.

• Experience with and/or relevant coursework on transmit/receive functions covering large frequency range (MHz thru Ka-band).  

• Experience with data analysis using MATLAB.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• MS in Electrical Engineering is a PLUS.

• RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.

• Experience using Keysight ADS and Mentor Graphics Xpedition design software.

• Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.

• Experience with engineering RF requirements development and verification.

• Experience interfacing with technical engineers production personnel and presenting to upper-level management.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-23

Country:

United States of America

Location:

US-TX-MCKINNEY-513WM ~ 2501 W University Dr ~ WING M BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon Engineers design, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges.  The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon.  Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.  

We are looking to add to our team and desire a Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats.  The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience.  May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work. 

What You Will Do

• Work with various teams of engineers, assemblers, and technicians.

• Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.

• Perform analysis on production data, to determine root cause analysis of failures.

• Be involved in planning and executing rework of production assemblies.

• Coordinate and execute tasks in Raytheon antenna ranges, maintain and standardize range infrastructure to meet program requirements.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and less than 2 years of prior work experience to include any combination of the following:

  • Experience with RF fundamentals, such as RF electro-magnetic spectrum, propagation delay, and RF components.

  • Experience with antenna measurement patterns and how antennas work.

  • Experience with decibels (dB’s) and/or dBm values within respect to equivalent power levels in Watts.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• RF experience and knowledge of microwave theory.

• Ability to build positive relationships and craft clear communication in and out of direct team members.

• Focus on results with ability to drive tasks to closure.

• Active DoD Secret clearance with investigation within last five years.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 57,200 USD - 108,800 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES The Project Lead is responsible to manage complex projects focused on avionics systems and sub-system for both manned and unmanned aircraft.

JT4 seeks an experienced and highly motivated candidate that will apply comprehensive knowledge of project management and systems engineering to lead small to medium-sized projects, ensuring they meet rigorous customer requirements, budget, and schedule constraints.

This role is critical to advancing the capabilities of our nation's military aviation platforms.

The ideal candidate will: Perform equally well independently or as part of a multi-disciplined team in a fast-paced, dynamic environment.

Be responsible for mission avionics systems integration and performance.

Lead cross-functional teams in the design, development, integration, and testing of avionics systems, including RADAR, Electronic Warfare (EW), and tactical communication/datalink systems.

Oversee projects, from initial concept and requirements definition through to deployment.

Make priority determinations, manage resources effectively, and perform resource leveling to ensure project milestones are met.

Develop, review, and approve all project documentation, including system specifications, test plans, and technical data packages.

Manage and control project scope, ensuring all technical requirements for manned and unmanned avionics systems are fulfilled.

Establish, execute, and report on project budgets, with a strong understanding of Earned Value Management (EVM) techniques.

Provide regular project status updates to program managers and customer stakeholders through detailed reviews and reports.

Serve as the primary interface with government customers, including the Air Force, Space Force, and Navy, ensuring their requirements are met and fostering strong relationships.

May be required to recruit, hire, and mentor technical personnel to build a high-performing project team.

Facilitate technical interchange meetings, working groups, and design reviews.

First-look opportunities may be extended to qualified candidates with an active Top Secret security clearance.

DESIRED QUALIFICATIONS A Bachelor's Degree in Engineering (Electrical, Aerospace, Computer), or a related technical field.

Minimum of 5 years of demonstrated experience in project or systems engineering related to military aircraft avionics.

Active Top Secret clearance highly desirable.

REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Must have a bachelor's or higher degree, or any combination of formal education, training and experience equivalent to 10 years involvement in technically demanding program or project assignments.

In addition, a Project Lead III must possess the following qualifications: Demonstrated experience in resource organization, planning, budgeting, and configuration management.

Must have excellent verbal and written communication skills, with the ability to present complex technical information to a variety of audiences.

Strong analytical, problem-solving, and troubleshooting abilities.

Must be a U.S.

citizen Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.

SALARY The expected salary range for this position is $105,000 to $160,000 annually.

Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.

JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.

BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

WORKING CONDITIONS This position involves work typical of an aircraft maintenance environment.

While most work will be performed using computers in an office setting, occasional hands-on tasks will require the ability to travel between work areas.

There is occasional lifting to 20 pounds, constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.

The incumbent must possess planning/organizing skills, be able to work under deadlines, and be able to work independently with minimal supervision.

Routine travel to remote Company work locations will be required.

Travel during the performance of work-related tasks may also be required.

DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a federal government contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.

SCC: JPM6, JABO33; JCORP12

Title : Controls Technician III Location : Newton NC | Onsite Pay Rate : $26/Hr on W2 Type & Duration : 6 Years contract possibility of extension based on demand.

Scope of this position: Supports the design and implementation of controls-based solutions for novel future processing equipment, specifically fiber making and cable process equipment, in the optical waveguide and cabling manufacturing processes.

These controls solutions will enable manufacturing systems to deliver and transform raw materials to product, convey ware between discrete processing steps, and/or measure and characterize ware created and/or processed by these novel manufacturing methods.

Day to Day Responsibilities: Integrate field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems based the system design package enabling a fully functional equipment platform.

Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences.

Implement specified field devices to accomplish desired process / equipment functions, and compatible / compliant with site standards.

Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline.

Participate in engineering project teams that are responsible to deliver robust, cost effective automation and process machine systems to Corning’s manufacturing plants and processes.

Work within project teams to support the solving of difficult automation problems, resolution of project related issues, and development of fundamental understanding of technical / process requirements critical to system success.

Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements.

Interface with external system integrators and machine builders to enable project deliverables.

Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer.

Report to project leader on assigned project activities on a pre-determined basis.

Required Education: Two-year technical degree Required Years and Area of Experience : 3+ years equipment/controls experience Required Skills: Experience integrating field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems into an overall controls package enabling a fully functional equipment platform.

Experience with PID control loop tuning and techniques.

Experience working closely with IT & process engineers to implement control sequence logic (both time-based and event-based), fail-safe states and process / equipment recovery sequences.

Experience with graphical user interface and human machine interface.

Experience working within engineering project teams.

Accurately estimates timeframe to complete assigned project work, once scope of work is adequately defined, then completes work to agreed-to timeline.

Understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration.

Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment.

Familiar with state-of-the-art technologies in the following areas: control systems integration, controls architectures, PLC’s, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems.

Ability to work in a team-based environment and lead or participate on a highly matrixed team.

Possesses an understanding of general mechanics and ability to apply that understanding during troubleshooting and system implementation.

Sound problem solving and decision-making skills.

Highly motivated, results oriented, customer focused, with a high commitment level.

Must be able to program in ladder logic or equivalent.

Experienced in the checkout and verification of electrical control panels.

Desired Skills: Experience preferred with Allen-Bradley, Beckhoff, LabVIEW, Safety PLCs, iFIX SCADA.

Manufacturing experience and ability to work in a manufacturing environment.

Computer vision system experience.

Experience with programming manufacturing systems using higher level programming languages: o C++ or C# o VB or VB.Net Robot programming skills.

Sound knowledge of the rules and regulation relating to implementation and best practices in electrical system design and implementation: o National Electric Code o NFPA 79 Specification o NFPA 70e Specification o ANSI and IEC electrical symbols o Grounding and shielding of electrical systems Able to work with external machine builders and system integrators for build, and integration of later stages of system implementation.

Identify, analyze, diagnose, and troubleshoot difital control systems Adhere to all client and customer safety standards Complete service repairs, replacements, upgrades, adjustments and calibration on automation systems and components Repair direct digital control systems
- Preventative maintenance, replacement, and modifications as needed
- On-site installation and repairs by examining building layout, anticipating difficulties Perform other tasks as directed by Supervisor Assist with relocation to Minneapolis, MN Utilize hand tools, laptop, and test equipment on site Work each day to help clients keep facilities running in top condition with no downtime Perform commissioning and start-up of HVAC and Building Controls on complex systems, including troubleshooting of systems Work independently and will be responsible for the efficient use of materials, equipment and time in performance of the job Perform scheduled preventative maintenance on all equipment (mostly Dematic Conveyors and some Intelligrated) Troubleshoot Electrical problems on the equipment as well as PLC's (Allen Bradley) Work independently with minimal supervision End testing, downloading programming, starting up, commissioning, and servicing Assist in the integration, startup and debugging of plant floor equipment Provide technical assistance to subcontractors Determining proposal price & selling strategy Act as the on-site project leader to plan, execute, and complete HVAC controls and building automation (BAS) projects with assigned customers Replace electrical, mechanical, pneumatic, and steam components Perform other work-related duties as assigned by supervisor Build electrical assemblies from schematics and drawings, including control panels, cables, and electro-mechanical sub-assemblies

DCS Corp has an exciting opportunity for a Senior Program Manager to support the Aerospace Dominance Enabler Division at Hill AFB in Ogden Utah.

HBZ functions as the Air Force’s technical, acquisition and sustainment experts providing unique and comprehensive support to the warfighter.

The ADE Division is responsible for a vast array of USAF systems to include Electronic Warfare, Range Systems, Range Instrumentation, Air Combat Training and Aircrew Readiness, Command and Control Systems, Advanced Radar Threat Systems, Combat Survivor Evader Locator, P5 Combat Training Systems, Black Switch and Legacy Voice Systems.

Furthermore, the ADE Division provides support to depot level sustainment and maintenance efforts, FMS, U.S.

Army, Navy, Pacific Air Forces, Air Combat Command (ACC), Air Force Materiel Command (AFMC), and Air Education and Training Command (AETC) on a continuous basis.

Essential Job Functions: Plan, research, analyze and assess projects in order to formulate plans and recommend effective strategies in meeting cost, schedule and performance objectives.

Support cost and schedule reduction activities for acquisition and development efforts.

Provide program level acquisition support to the Program Manager and Integrated Product Team Leads by helping guide successful program execution to maintain the acquisition battle rhythm and deliver warfighter capability.

Provide support and solutions to program leadership to facilitate successful contract execution for the program and analyzes overall program health and advises program leadership on options to maintain cost, schedule and performance objectives.

Support and develop various briefings/schedules of program status and acquisition tasks to senior management.

Provide expert Program Management inputs to Request for Proposal (RFPs) including systems specs, Electronic Warfare Systems (SRDs), Statement of Work (SOWs), and Contract Data Requirements List (CDRLs), and other RFP products.

Review acquisition documents and provides comments with programmatic perspective to ensure consistency and accuracy.

Documents may include, but are not limited to, ADMs, LCSP, Acquisition Strategies, APBs, Risk Management Plans, PMRs and milestone decision briefings.

Support, prepare, review and develop acquisition reports, including statutory and regulatory acquisition report and milestone review documentations identified in DoDI 5000.02.

Support implementation and execution of acquisition and development effort processes in concert with Government and weapon system prime contractors.

Provide non-technical acquisition program management to include guidance and expertise necessary to apply principles, criteria, and procedures of DoD Directive 5000.1, DoDI 5000.02, NSSAP 03-02, and other DoD, AF, AFMC, and AFLCMC Instructions, Directives, Regulations, and guidance documents as applicable.

Outline policy disconnects, policy interpretation, and management of all acquisition efforts.

Advise the PM on best practice PM principles to achieve substantial process improvements, efficiencies, and potential cost avoidance.

Assist with planning, evaluating and implementing program acquisition strategies.

This includes DoD and AF policy and/or guidance; technical approach and/or requirements; risk assessment; and realism in achieving a product suitable for the warfighter within cost, schedule, and performance constraints.

Also includes broad range of program acquisition strategies, market research, evaluating deliverables requirements and best practice management; this includes support to Urgent Capability Acquisitions and Middle Tier of Acquisition as defined in DoDI 5000.80, Operation of the Middle Tier of Acquisition and DoDI 5000.81, Urgent Capability Acquisition.

Support and coordinate with program level scheduling personnel.

Develop, maintain, and update program risk management plans IAW the Risk Management Guide for DoD Acquisition, AFPAM 63-128, and the Air Force RI3 Guidebook; facilitate program risk identification, risk analysis, risk handling and risk monitoring; assist with execution of program risk management boards, risk management working groups (or equivalent), and document meeting minutes; includes analyzing prime and sub-contractor risk management processes.

Assist with development, maintenance, and update of acquisition reports such as the Monthly Activity Reports (MAR), Source Approval Request (SAR), Defense Acquisition Executive Summary (DAES), Acquisition Program Baseline (APB), and supplemental reports as required by DoD policy for ACAT I, ACAT II, and ACAT III programs and IAW DoDI 5000.02, AFI 63-101_20-101, and AFPAM 63-128.

This requires use of standardized and specialized software applications such as M/S Office, Integrated Budget Documentation and Execution System (IDECS), Electronic Document Access (EDA), Comprehensive Cost and Requirement’s System (CCaR), and any other DoD/Office of the Secretary of Defense (OSD) mandated system(s).

Provide direct support in preparing and submitting funding documents (e.g.

Purchase Request, MIPR, Purchase Orders, etc.).

Requires familiarity with Financial systems such as Comprehensive Cost and Requirement’s System (CCaR).

Assist with preparation of briefings, graphics and reports in direct support of the acquisition program management functions.

Provide services critical to Life Cycle Logistics and operational supportability.

Interpret, organize, execute, and coordinate acquisition project assignments and make recommendations to Government Program Manager regarding problems with unique or controversial items that may have a major effect on the overall performance and execution of acquisition & sustainment projects.

Compare program direction and program plans for consistency.

Review and track prime contractor deliverables status and schedules.

Review program integration plans and provide comments.

Monitor interface control between IT systems.

Assist with drafting contractual letters on program management issues.

Assist with development of source selection strategies, evaluation criteria, Request for Proposal (RFP) documentation, and other source selection administrative support.

Keep abreast of DoD acquisition reform policies and Air Force Instructions, and recommend revisions to new and existing programs impacted by the changes, such as Review, Discuss and Concur (RDC) and Evolutionary Acquisition, including Spiral Development and Incremental Development.

Assist with mission execution to include but not limited to operational planning, operational analysis, capability development, event integration, event execution, analysis and reporting.

Required Skills: Due to the sensitivity of customer related requirements, U.S.

Citizenship is required.

A High School Diploma plus 30 years of experience, 20 of which must be in the DoD or a Bachelor's degree plus 25 years of experience, 15 of which must be in the DoD.

An adjudicated DoD Secret Security clearance on the First Day of employment.

Familiar with cloud-based systems, including management and projection of cost and performance.

Familiar with agile methods and CI/CD, DevSecOps and DevOps principals.

Comprehensive knowledge of principles, policies and practices of systems acquisition and program management, as defined in DoDI 5000.02 and 5000.75, as well as knowledge of roles and relationships within the DoD and the Air Force.

Possess knowledge of qualitative and quantitative techniques for gathering, analyzing, and measuring the effectiveness, efficiency and productivity of acquisition programs.

Possesses the ability to effectively communicate orally and in writing, providing quality acquisition and program documentation including but not limited to briefings, documents, and plans.

Position Summary The Manager Financial Analysis assists the Market Director of Finance, Field Operations (MDOF) or Director of Finance, Field Operations (DOF) by providing leadership, guidance and support with financial compliance.

As a business advisor, the position provides the financial expertise to enable the successful implementation of the annual budgeted goals and delivery of desirable financial results.

Perform various financial modeling and analytical requests, and maintain strong internal controls environment, including the compliance to company standards, policies, and Sarbanes-Oxley requirements.

Ensuring proper controls are in place to mitigate risks for the organization.

Core work activities include, but not limited to business partnering with various stakeholders to meet financial objectives, financial statement review and analysis, and compliance of accounting controls.

Expected Contributions Accounting, Controls, and Financial Analysis: Supports day to day operations and department objectives including but not limited to, verifying compliance with the Cash Handling policy and Compliance Standards, conducting initial research to assist internal customers and escalates to corporate F&A Leaders as appropriate, identifying and anticipating future business needs, and implementing new processes.

Review and analyze financial statements in accordance to Generally Accepted Accounting Principles.

Provide guidance and support to accounting services group as appropriate.

Research and document variances from actual results compared to budget and previous forecast.

Ensure balance sheet accounts are supported by appropriate documentation Ensure tax rates used for sales and use tax are current and proper amounts are collected and/or accrued.

Conduct property level self-assessments and assist with internal, tax, and regulatory audits.

Identify, develop, communicate, and complete action plans to rectify deficiencies in a timely manner.

Provide analysis and analytical support during budget reviews and capital planning to identify cost savings and productivity opportunities.

Assist with cash flow and profit forecasts that facilitate timely adjustments to the business by on-site leaders.

Prepare data, information, and clear, concise variance explanations demonstrating a thorough understanding of the financial statements to corporate F&A leaders.

Effectively present information and respond to inquiries from various key stakeholders.

Managing and Business Partnerships: Utilize effective relationship building skills with a broad range of business partners to gain trust, positively impact decision outcomes, and mitigate risk to the organization.

Stakeholders include on-site leaders and associates, corporate and regional F&A executives, corporate and regional Marketing & Sales executives, internal and external auditors, corporate tax, corporate Accounting Shared Services Group, and third-party vendors.

Provide financial expertise, analysis and insights that enable our stakeholders to make timely and informed business decisions, optimize business value, and manage financial risk.

Champion, drive, and embed finance principles in the Business Unit and ensure its inclusion in the business planning process.

Create a positive work environment with collaborative relationships that encourages others and celebrates successes.

Provide hands-on, real time, financial analysis expertise to Marketing & Sales on-site leaders and other key stakeholders.

Train non-financial Marketing & Sales on-site leaders as appropriate in order to enhance business understanding.

Perform reasonable request as assigned.

Candidate Profile Education: Bachelor's degree in Finance or Accounting preferred, or related major; 2-4 years related work experience in finance and accounting.

High School Diploma/GED and equivalent work experience Skills and Attributes: Leadership Adaptability
- Determines how change impacts self and others; displays flexibility in adjusting priorities; and communicates both the reasons for change and how it impacts the workplace.

- Customizes approach to conveying complex information and ideas to others in a convincing and engaging manner; appropriately interprets verbal and non-verbal behavior; and models active listening to ensure understanding.

Problem Solving and Decision Making
- Models and coaches others on breaking complex issues into manageable parts, identifying and evaluating alternatives and their implications before making decisions, and involving and gaining agreement from others when making key decisions.

Professional Demeanor
- Exhibits behavioral styles that convey confidence and command respect from others; makes a good first impression and represents the company in alignment with its values.

Managing Execution Building and Contributing to Teams
- Leads and participates as a member of a team to move the team toward the completion of common goals while fostering cohesion and collaboration among team members.

Driving for Results
- Sets high standards of performance for self and/or others; assumes responsibility for work objectives; initiates, focuses, and monitors the efforts of self and/or others toward the accomplishment goals; proactively takes action and goes beyond what is required Planning and Organizing
- Gathers information and resources required to set a plan of action for self and/or others; prioritizes and arranges work requirements for self and/or others to accomplish goals and ensure work is completed.

Building Relationships Coworker Relationships
- Interacts with others in a way that builds openness, trust, and confidence in the pursuit of organizational goals and lasting relationships.

Customer Relationships
- Develops and sustains relationships based on an understanding of customer needs and actions consistent with the company’s service standards Global Mindset
- Supports employees and business partners with diverse styles, abilities, motivations, and/or cultural perspectives; utilizes differences to drive innovation, engagement and enhance business results; and ensures employees are given the opportunity to contribute to their full potential.

Generating Talent and Organizational Capability Organizational Capability
- Evaluates and adapts the structure of team assignments and work processes to best fit the needs and/or support the goals of an organizational unit.

Talent Management
- Provides guidance and feedback to help individuals develop and strengthen skills and abilities needed to accomplish work objectives.

Learning and Applying Professional Expertise Applied Learning
- Seeks and makes the most of learning opportunities to improve performance of self and/or others.

Business Acumen
- Understands and utilizes business information to manage everyday operations and generate innovative solutions to approach team, business, and administrative challenges.

Economics and Accounting
- Knowledge of P&L statements, operating budgets, forecasting and scheduling, and the reporting of financial data Auditing and Reconciliation
- The ability to recognize, research, and resolve discrepancies in financial data, and create flow charts on main accounting and control cycles (A/R, AP, Cash) to facilitate understanding of key control points.

General Finance and Accounting
- The ability to perform bookkeeping procedures, proficiently use financial systems technology, and accurately complete general ledger entries; knowledge of database structures in order to obtain financial queries; establish Cash flow statements and cash flow forecast with a good understanding the financials flows and the working capital needs.

Analysis
- The ability to create and maintain spreadsheets as well as analyze and summarize financial data using appropriate financial software.

Accounting Knowledge
- Knowledge of general accounting principles and current company accounting policies and procedures.

This includes general accounting and financial reporting, auditing, accounts payable, and accounts receivable.

Accounting and Internal Control Knowledge
- Knowledge of local Generally Accepted Accounting Principles (local GAAP), Marriott International Policies (MIP), and International Standard Operating Procedures (ISOPs).

Legal
- Ability to read and understand basic contract elements, e.g.

royalty fees, management agreement, terms, priorities and profit distribution.

Auditing Skills
- The ability to perform auditing procedures, including the ability to recognize, research, and resolve discrepancies in financial data.

Payroll Systems
- Knowledge of local payroll reporting and tax requirements, ability to effectively record wages/tax liabilities, and operate payroll software applications, including understanding the features and functions of the applications.

Accounts Payable and Accounts Receivable
- Knowledge of Accounts Payable and Accounts Receivable processes, including knowledge of sub ledger reconciliation and controls.

Basic Competencies
- Fundamental competencies required for accomplishing basic work activities.

Mathematical Reasoning
- Demonstrates ability to add, subtract, multiply, or divide quickly, correctly, and in a way that allows one to solve work-related issues.

Oral Comprehension
- Demonstrates ability to listen to and understand information and ideas presented through spoken words and sentences.

Reading Comprehension
- Demonstrates understanding of written sentences and paragraphs in work-related documents.

- Communicates effectively in writing as appropriate for the needs of the audience.

Any four days the candidate chooses.

The standard work hours are 9:00 AM to 5:00 PM Budget Range for this Role- $70,000
- $80,000 Hyatt Vacation Ownership is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.

Description

Our 27-bed Emergency Department is designated as a Level 4 Trauma Center. The ED is capable of providing emergency, urgent and non-urgent care to patients of all ages. Patients in need of medical-surgical and sub-specialty services are seen and treated in the Emergency Department. The patients seeking care have a wide range of needs from basic ambulatory care to trauma intervention and life support. We are a primary Percutaneous Coronary Intervention (PCI) center and Primary Stroke Center. Currently working on an ED expansion plan to include the addition of patient treatments rooms as well as CT, X-Ray and Laboratory all located inside the Emergency Department.

CHRISTUS Health has a very strict Code of Ethics Guide. It is implemented in the highest standards and is part of our everyday responsibilities. Our actions are filled with a spirit of mutual respect, which encourages us to treat those we serve with compassion, respect and dignity.

Do you want to work in a friendly, professional and supportive faith-based organization? Come and join our Westover hills family!!!

Summary:

The competent Nurse, in the same or similar clinical setting, practices independently and demonstrates an awareness of all relevant aspects of a situation. Provides routine and complex care, with the ability to on long-range goals or plans. Continues to develop the ability to cope with and manage contingencies of clinical nursing. Makes appropriate assignments and delegates to other care providers as a means to help manage the clinical situation.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Consistent with the ANA Scope and Standards of Practice, provides nursing care utilizing the nursing process, including assessment, diagnosis, planning, intervention and evaluation for assigned patients.
• Addresses increasingly complex psychological, emotional, cultural, and social needs of patient and families in accordance with their level of practice.
• Using the appropriate protocol, administers medications and treatments; monitors for side-effects and effectiveness of the treatment prescribed.
• Documents patient history, symptoms, medication, and care given.
• Assess learning needs and provides education to patients, family members and/or care givers; identify issues and resources.

Job Requirements:

Education/Skills

• Bachelor of Science Degree in Nursing, preferred

Experience

• 1 year of experience in the related nursing specialty preferred

Licenses, Registrations, or Certifications

• BLS required
• RN License in state of employment or compact

Position Requirements:

Education/Skills

• All newly hired experienced RNs must attend New Nurses Orientation within the first 30 days of hire.
• New hires are precepted by a designated trained staff member and initial on-boarding requirements are validated through successful completion of the designated organizational entry competency validation and an Emergency Department- specific competency validation.
• All newly licensed RNs may participate in a residency program or other specific orientation. Skills completion and competency completion will be achieved with the preceptor at the bedside and documented through the program's tracking software.
• Completion of all annual competency verification requirements.

Experience

• One year of experience in a related nursing specialty preferred.

Licenses, Registrations, or Certifications

• Current ACLS certification required
• Current PALS certification required
• Current TNCC certification required

In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain required certifications for their respective positions within the designated time frame.

Credential Grace Periods:

If additional credentials are required per the Position Requirements section, a grace period to obtain the certification will apply, dependent on your experience level.

• Any Candidate/Associate with at least one year of acute care clinical experience in a similar service line within the past three years is considered an Experienced Associate.
• Any Candidate/Associate who does not have at least one year of full-time acute care clinical experience in the same service line within the past three years is considered an Experienced Associate New to the Specialty.

Work Schedule:

MIDS - 12 HOURS

Work Type:

Full Time

Description

Our 27-bed Emergency Department is designated as a Level 4 Trauma Center. The ED is capable of providing emergency, urgent and non-urgent care to patients of all ages. Patients in need of medical-surgical and sub-specialty services are seen and treated in the Emergency Department. The patients seeking care have a wide range of needs from basic ambulatory care to trauma intervention and life support. We are a primary Percutaneous Coronary Intervention (PCI) center and Primary Stroke Center. Currently working on an ED expansion plan to include the addition of patient treatments rooms as well as CT, X-Ray and Laboratory all located inside the Emergency Department.

CHRISTUS Health has a very strict Code of Ethics Guide. It is implemented in the highest standards and is part of our everyday responsibilities. Our actions are filled with a spirit of mutual respect, which encourages us to treat those we serve with compassion, respect and dignity.

Do you want to work in a friendly, professional and supportive faith-based organization? Come and join our Westover hills family!!!

Summary:

The competent Nurse, in the same or similar clinical setting, practices independently and demonstrates an awareness of all relevant aspects of a situation. Provides routine and complex care, with the ability to on long-range goals or plans. Continues to develop the ability to cope with and manage contingencies of clinical nursing. Makes appropriate assignments and delegates to other care providers as a means to help manage the clinical situation.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Consistent with the ANA Scope and Standards of Practice, provides nursing care utilizing the nursing process, including assessment, diagnosis, planning, intervention and evaluation for assigned patients.
• Addresses increasingly complex psychological, emotional, cultural, and social needs of patient and families in accordance with their level of practice.
• Using the appropriate protocol, administers medications and treatments; monitors for side-effects and effectiveness of the treatment prescribed.
• Documents patient history, symptoms, medication, and care given.
• Assess learning needs and provides education to patients, family members and/or care givers; identify issues and resources.

Job Requirements:

Education/Skills

• Bachelor of Science Degree in Nursing, preferred

Experience

• 1 year of experience in the related nursing specialty preferred

Licenses, Registrations, or Certifications

• BLS required
• RN License in state of employment or compact

Position Requirements:

Education/Skills

• All newly hired experienced RNs must attend New Nurses Orientation within the first 30 days of hire.
• New hires are precepted by a designated trained staff member and initial on-boarding requirements are validated through successful completion of the designated organizational entry competency validation and an Emergency Department- specific competency validation.
• All newly licensed RNs may participate in a residency program or other specific orientation. Skills completion and competency completion will be achieved with the preceptor at the bedside and documented through the program's tracking software.
• Completion of all annual competency verification requirements.

Experience

• One year of experience in a related nursing specialty preferred.

Licenses, Registrations, or Certifications

• Current ACLS certification required
• Current PALS certification required
• Current TNCC certification required

In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain required certifications for their respective positions within the designated time frame.

Credential Grace Periods:

If additional credentials are required per the Position Requirements section, a grace period to obtain the certification will apply, dependent on your experience level.

• Any Candidate/Associate with at least one year of acute care clinical experience in a similar service line within the past three years is considered an Experienced Associate.
• Any Candidate/Associate who does not have at least one year of full-time acute care clinical experience in the same service line within the past three years is considered an Experienced Associate New to the Specialty.

Work Schedule:

MIDS - 12 HOURS

Work Type:

Full Time

Description

CHRISTUS Santa Rosa Hospital - Westover Hills (CSRH-WH) is a 150-bed hospital serving the fastest growing area of San Antonio. Specialized care includes orthopedic and surgical services, ICU, women's services, a newborn nursery, comprehensive cardiovascular care from diagnostics to open heart surgery, vascular lab, sleep center, emergency services, the CHRISTUS Weight Loss Institute, wound care, rehabilitation, and more. The campus also boasts an Outpatient Imaging Center and three medical plazas, one of which houses our CHRISTUS Santa Rosa Family Medicine Residency Program and CHRISTUS Santa Rosa Family Health Center.

Our 27-bed Emergency Department isdesignatedas a Level 4 Trauma Center. The ED is capable of providing emergency,urgentand non-urgent care to patients of all ages. Patients in need of medical-surgical and sub-specialty services are seen and treated in the Emergency Department. The patients seeking care have a wide range of needs from basic ambulatory care to trauma intervention and life support. We are a primary Percutaneous Coronary Intervention (PCI) center and Primary Stroke Center. Currently working on an ED expansion plan to include the addition of patient treatments rooms as well as CT, X-Ray and Laboratory alllocatedinside the Emergency Department.

CHRISTUS Health hasa very strictCode of Ethics Guide. It is implementedinthe highest standards and is part of our everyday responsibilities. Our actions are filled with a spirit of mutual respect, which encourages us to treat those we serve with compassion,respectand dignity.

Do you want to work in a friendly, professional and supportive faith-based organization? Come and join our Westover hills family!!!

Summary:

The competent Nurse, in the same or similar clinical setting, practices independently and demonstrates an awareness of all relevant aspects of a situation. Provides routine and complex care, with the ability to on long-range goals or plans. Continues to develop the ability to cope with and manage contingencies of clinical nursing. Makes appropriate assignments and delegates to other care providers as a means to help manage the clinical situation.

Responsibilities:

• Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
• Consistent with the ANA Scope and Standards of Practice, provides nursing care utilizing the nursing process, including assessment, diagnosis, planning, intervention and evaluation for assigned patients.
• Addresses increasingly complex psychological, emotional, cultural, and social needs of patient and families in accordance with their level of practice.
• Using the appropriate protocol, administers medications and treatments; monitors for side-effects and effectiveness of the treatment prescribed.
• Documents patient history, symptoms, medication, and care given.
• Assess learning needs and provides education to patients, family members and/or care givers; identify issues and resources.

Job Requirements:

Education/Skills

• Bachelor of Science Degree in Nursing, preferred

Experience

• 1 year of experience in the related nursing specialty preferred

Licenses, Registrations, or Certifications

• BLS required
• RN License in state of employment or compact

Position Requirements:

Education/Skills

• All newly hired experienced RNs must attend New Nurses Orientation within the first 30 days of hire.
• New hires are precepted by a designated trained staff member and initial on-boarding requirements are validated through successful completion of the designated organizational entry competency validation and an Emergency Department- specific competency validation.
• All newly licensed RNs may participate in a residency program or other specific orientation. Skills completion and competency completion will be achieved with the preceptor at the bedside and documented through the program's tracking software.
• Completion of all annual competency verification requirements.

Experience

• One year of experience in a related nursing specialty preferred.

Licenses, Registrations, or Certifications

• Current ACLS certification required
• Current PALS certification required
• Current TNCC certification required

In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain required certifications for their respective positions within the designated time frame.

Credential Grace Periods:

If additional credentials are required per the Position Requirements section, a grace period to obtain the certification will apply, dependent on your experience level.

• Any Candidate/Associate with at least one year of acute care clinical experience in a similar service line within the past three years is considered an Experienced Associate.
• Any Candidate/Associate who does not have at least one year of full-time acute care clinical experience in the same service line within the past three years is considered an Experienced Associate New to the Specialty.

Work Schedule:

PRN

Work Type:

Per Diem As Needed