Trace Elemental Instruments, BV Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.

As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes. In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels. Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow. You will collaborate with various teams to facilitate the movement of parts. Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.

• Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.

• Coordinate, prepare, and package finished products for transportation to customers.

• Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.

• Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.

• Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks. Utilize information systems to track parts and manage work priority and sequencing. Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.

• Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.

• Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.

• Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.

• Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.

• Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily. Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using tools and/or hand-held power tools.

• Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).

• Experience with electrical assembly installation.

• Ability to recognize colors.

• Proficiency in reading, writing, and speaking English.

• Ability to lift 35 pounds.

Preferred Qualifications:

• Experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This position is for 2nd shift.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jun. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington.

As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures.

• Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight).

• Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments.

• Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance.

• Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions.

• Create production aids as needed to facilitate inspection assignments.

• Maintain necessary certifications, licenses, and permits required for the role.

• Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights up to 35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

• Must be willing to work any shift; including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Safety Sensitive Statement:

This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 06, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a seasoned Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model.

The successful candidate will apply deep expertise in LO materials, integration, manufacturing, computational electromagnetic (CEM) modelling, and test support to design, build and test a representative pole model for an advanced next generation program in the St. Louis region.

Key Responsibilities:

• Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration.

• Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics.

• Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components.

• Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop.

• Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations.

• Prepare and execute data processing workflows to reduce, calibrate, and analyze measured RCS and related EM test data; combine simulation and measurement data for validation and design iteration.

• Produce clear technical documentation: design descriptions, analysis reports, test plans, test reports, procedures, and presentation materials for program reviews.

• Mentor junior engineers and support continuous improvement of LO design, test, and data processing practices.

Working Conditions and Physical Requirements:

• Hands-on support in fabrication or test setups may be required.

• Will require travel to other company locations, supplier facilities, fabrication shops, and test ranges (including anechoic chambers and outdoor ranges).

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 7+ years of professional experience working with low observable materials and technologies, including hands-on exposure to LO integration, design, manufacturing, and test.

• Demonstrated experience using computational electromagnetic solvers (e.g., FEKO, HFSS, CST, WIPL-D, CARLOS, SENTRI, XPATCH or equivalent) for design and optimization of LO systems and RCS predictions.

• Strong understanding of electromagnetic principles relevant to scattering, phenomena and Radar Cross Section.

• Proven track record supporting fabrication and testing of LO components/assemblies and correlating measurements to models.

• Proficiency in data processing and analysis of RCS/EM test data, including calibration, clutter and background rejection, and data visualization techniques.

• Excellent technical writing skills with experience producing engineering reports, test plans, and test reports.

• Effective verbal communication and collaboration skills; ability to lead technical discussions and interface with suppliers, customers, leadership and test facility personnel.

• Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required)

Preferred Qualifications (Desired Skills and Experience):

• Advanced degree (MS/PhD) in a relevant discipline.

• Past experience with RCS pole models, and range testing.

• Experience with material characterization techniques.

• Knowledge of LO materials and application processes, as well as nondestructive inspection methods for LO components.

• Familiarity with CAD tools and integration with CEM workflows.

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $136,850- $185,150

Applications for this position will be accepted until Apr. 01, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Are you an experienced MDS nurse interested in the next step? The MDS Coordinator provides oversight of the RAI process and conducts assessments and care plan coordination for guests. The MDS Coordinator supervises the Care Management Nurse, MDS Nurse.

The Laurels of Fulton offers one of the leading employee benefit packages in the industry, including health insurance, 401K with matching funds, paid time off and paid holidays. When you work with The Laurels of Fulton, you will join an experienced, hard-working team that values communication and collaboration. Why just work when you can help shape a legacy?

Responsibilities

• Completes the MDS, CAA’s and care plans within regulated time frames.

• Coordinates scheduling the RAI process with the interdisciplinary team

• Assesses resident through physical assessment, interview and chart review.

• Discusses resident care needs with care givers, including physician, nursing, social services, therapy, dietary, and activity staff.

• Reviews information from hospital, consults and outside agencies and uses such information in the completion of the assessment and care planning.

• Coordinates, identifies, and/or initiates significant change MDS’

• Is prepared to conduct PPS meetings maintaining MDS assessments per Medicare schedule and maintains PPS board for monitoring of Medicare days and RUGs utilization in the absence of the Care Management Coordinator

• Remains current with American Association of Nursing Assessment Coordinators (AANAC) requirements.

Qualifications

• Registered Nurse (RN) 

• AANC certification a plus. RAC-CT

• Knowledge of the Resident Assessment Instrument (RAI) process, including the principles the Prospective Payment Process (PPS) strongly preferred.

• Experience as an MDS Nurse

About Laurel Health Care Company

Laurel Health Care Company is a national provider of skilled nursing, subacute, rehabilitative, and assisted living services dedicated to achieving the highest standards of care.

At The Laurels, caring is more than providing excellent medical and guest services. It's also being a companion, and treating each guest with the utmost dignity, respect and compassion. It's what we call "The Laurel Way of Caring", and it comes from within each one of us.

The Laurels was named a Great Place to Work for 2020 based on approximately 3,500 employee surveys that evaluated more than 60 elements of employee experience on the job, including employee pride in community impact, belief that their work makes a difference, and feeling their work has special meaning.

IND123

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

This position is for an Electrical Engineer II with at least 2 years of professional experience.  If you enjoy working in hands-on multidiscipline teams, the Test Equipment Directorate is interested in hearing from you!

The Test Equipment Directorate is a multi-discipline organization responsible for developing test solutions for all Raytheon products. Our engineers are responsible for all elements of the development lifecycle for test.  We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world.  Typical work involves designing interface assemblies, selection and integration with test instruments and environments, to develop a test system for all Raytheon products.  These core activities may be performed for both lab engineering and factory production test systems.  The candidate will contribute to the completion of all stages of test product development and will be responsible for helping to maintain the technical, cost and schedule aspects of their assigned projects. They will be expected to act, either as a part of their team or independently, to uncover and resolve issues associated with the development and implementation of test products.

This position will be onsite in Tucson, Arizona

This role will work Second Shift: 4PM-4AM Monday through Friday

What You Will Do:

•    Design, development, and integrate Raytheon test products within Test Equipment in multidiscipline engineering teams
•    Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis
•    Contribute to the completion of all stages of test product development, and responsible for performing technical, cost and schedule management of assigned projects
•    Act, either as a part of the team or independently, to uncover and resolve issues associated with the development and implementation of test products 

Qualifications You Must Have:

•    Typically requires Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two (2) years of prior relevant experience OR an Advanced degree
•    The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
•    Experience with electrical engineering to include troubleshooting, analysis, and test
•    Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic
•    Experience with commonly used test equipment including but not limited to: Oscilloscopes, DMMs, Network Analyzers, Power Meters
•    Experience using schematic capture tools and interpreting schematics
 

Qualifications We Prefer:

•    Master of Science degree in Science, Technology, Engineering or Mathematics (STEM). ABET is the preferred, although not required, accreditation standard
•    Ability to provide technical leadership in a multidiscipline team environment
•    Experience performing analog, digital, and/or RF design
•    Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect
•    Experience utilizing integrated development environments and debugging tools to troubleshoot software
•    Self-starter and able to manage workload to meet assigned deadlines
•    Experience working in a team environment
•    Proficient technical writing and formal presentation experience
•    Ability to lead single- or multi-discipline teams of engineers
•    Project management experience
•    Bid and proposal experience
•    Knowledge of computer architecture and computer hardware optimization techniques
•    Experience with developing and implementing programming languages
•    Utilize existing designs as a starting point to interface with new units under test (UUTs) and UUT configurations when necessary
•    Experience with troubleshooting and root-cause analysis
•    Knowledge of RTX projects, programs or systems to make enhancements and leverage in daily work.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms