Topstep X Jobs in Usa

JOB REQUIREMENTS AND DUTIES

• 
  
• You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings.
  
• General Job Duties For All Store Team Members
  
• Operate all equipment.
  
• Stock ingredients from delivery area to storage, work area, walk-in cooler.
  
• Prepare product.
  
• Receive and process telephone orders.
  
• Take inventory and complete associated paperwork.
  
• Clean equipment and facility approximately daily.
  

Training

• 
  
• Orientation and training provided on the job.
  
• Communication Skills
  
• Ability to comprehend and give correct written instructions.
  
• Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person.
  

Essential Functions/Skills

• 
  
• Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator).
  
• Must be able to make correct monetary change.
  
• Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed.
  
• Ability to enter orders using a computer keyboard or touch screen.
  
• Navigational skills to read a map, locate addresses within designated delivery area.
  
• Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product.
  

Work Conditions
EXPOSURE TO

• 
  
• Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks.
  
• In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas.
  
• Sudden changes in temperature in work area and while outside.
  
• Fumes from food odors.
  
• Exposure to cornmeal dust.
  
• Cramped quarters including walk-in cooler.
  
• Hot surfaces/tools from oven up to 500 degrees or higher.
  
• Sharp edges and moving mechanical parts.
  
• Varying and sometimes adverse weather conditions when delivering product, driving and couponing.
  

SENSING

• 
  
• Talking and hearing on telephone. Near and mid-range vision for most in-store tasks.
  
• Depth perception.
  
• Ability to differentiate between hot and cold surfaces.
  
• Far vision and night vision for driving.
  

TEMPERAMENTS

The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions.

PHYSICAL REQUIREMENTS, including, but not limited to the following:

Standing
Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48".

Walking
For short distances for short durations
Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the
customer's location.

Sitting
Paperwork is normally completed in an office at a desk or table

Lifting
Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand
truck.
Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'.
Cases are usually lifted from floor and stacked onto shelves up to 72" high.

Carrying
Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves.
Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store.
Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray.
During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties.

Pushing
To move trays which are placed on dollies.
A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push.
Trays may also be pulled.

Climbing
Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls,
perform maintenance.
During delivery of product, navigation of five or more flights of stairs may be required.

Stooping/Bending
Forward bending at the waist is necessary at the pizza assembly station.
Toe room is present, but workers are unable to flex their knees while standing at this station.
Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day.
Forward bending is also present at the front counter and when stocking ingredients.

Crouching/Squatting
Performed occasionally to stock shelves and to clean low areas.

Hand Tasks
Eye-hand coordination is essential. Use of hands is continuous during the day.
Frequently activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists.
Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter.
Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes.
Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes.

Driving Specific Job Duties
Deliver product by car and then to door of customer.
Deliver flyers and door hangers.

Requires
Valid driver's license with safe driving record meeting company standards.
Access to insured vehicle which can be used for delivery.

ABOUT THE JOB
You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you.

We are searching for qualified customer service reps with personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you.

ADVANCEMENT
Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From customer service representative to management, General Manager to Manager Corporate Operations or Franchisee, our stores offer a world of opportunity.

DIVERSITY
Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential.

SUMMARY STATEMENT
We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first!

JOB REQUIREMENTS

• 
  
• You must be 16 years of age or older.
  
• General Job Duties For All Store Team Members
  
• Operate all equipment.
  
• Stock ingredients from delivery area to storage, work area, walk-in cooler.
  
• Prepare product. Receive and process telephone orders
  
• Take inventory and complete associated paperwork.
  
• Clean equipment and facility approximately daily.
  
• Training
  
• Orientation and training provided on the job.
  
• Communication Skills
  
• Ability to comprehend and give correct written instructions.
  
• Ability to communicate verbally with customers and co-workers to process orders both over the phone and in
  
• person.
  
• Essential Functions/Skills
  
• Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator).
  
• Must be able to make correct monetary change.
  
• Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and
  
• hands/fingers to rapidly and accurately make precise movements with speed.
  
• Ability to enter orders using a computer keyboard or touch screen.
  

Work Conditions

• 
  
• EXPOSURE TO
  
• Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks.
  
• In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas.
  
• Sudden changes in temperature in work area and while outside.
  
• Fumes from food odors.
  
• Exposure to cornmeal dust.
  
• Cramped quarters including walk-in cooler.
  
• Hot surfaces/tools from oven up to 500 degrees or higher.
  
• Sharp edges and moving mechanical parts.
  

SENSING

• 
  
• Talking and hearing on telephone. Near and mid-range vision for most in-store tasks.
  
• Depth perception.
  
• Ability to differentiate between hot and cold surfaces.
  

TEMPERAMENTS
The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions.

Additional Job Details PHYSICAL REQUIREMENTS, including, but not limited to the following:

• 
  
• Standing
  
• Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 4".
  
• Walking For short distances for short durations
  
• Sitting
  
• Paperwork is normally completed in an office at a desk or table
  
• Lifting
  
• Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck.
  
• Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3'x 1.5'.
  
• Cases are usually lifted from floor and stacked onto shelves up to 72" high.
  
• Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves.
  
• Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store.
  
• Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray.
  
• Pushing
  
• To move trays which are placed on dollies.
  
• A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push.
  
• Trays may also be pulled.
  
• Climbing
  
• Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls,
  
• perform maintenance.
  

JOB REQUIREMENTS AND DUTIES

• 
  
• You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings.
  
• General Job Duties For All Store Team Members
  
• Operate all equipment.
  
• Stock ingredients from delivery area to storage, work area, walk-in cooler.
  
• Prepare product.
  
• Receive and process telephone orders.
  
• Take inventory and complete associated paperwork.
  
• Clean equipment and facility approximately daily.
  

Training

• 
  
• Orientation and training provided on the job.
  
• Communication Skills
  
• Ability to comprehend and give correct written instructions.
  
• Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person.
  

Essential Functions/Skills

• 
  
• Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator).
  
• Must be able to make correct monetary change.
  
• Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed.
  
• Ability to enter orders using a computer keyboard or touch screen.
  
• Navigational skills to read a map, locate addresses within designated delivery area.
  
• Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product 
  

Work Conditions
EXPOSURE TO

• 
  
• Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks.
  
• In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas.
  
• Sudden changes in temperature in work area and while outside.
  
• Fumes from food odors.
  
• Exposure to cornmeal dust.
  
• Cramped quarters including walk-in cooler.
  
• Hot surfaces/tools from oven up to 500 degrees or higher.
  
• Sharp edges and moving mechanical parts.
  
• Varying and sometimes adverse weather conditions when delivering product, driving and couponing.
  

SENSING

• 
  
• Talking and hearing on telephone. Near and mid-range vision for most in-store tasks.
  
• Depth perception.
  
• Ability to differentiate between hot and cold surfaces.
  
• Far vision and night vision for driving.
  

TEMPERAMENTS

The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions

PHYSICAL REQUIREMENTS, including, but not limited to the following:

Standing
Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48".

Walking
For short distances for short durations
Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location.

Sitting
Paperwork is normally completed in an office at a desk or table

Lifting
Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand
truck.
Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'.
Cases are usually lifted from floor and stacked onto shelves up to 72" high.

Carrying
Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves.
Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store.
Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray.
During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties.

Pushing
To move trays which are placed on dollies.
A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push.
Trays may also be pulled.

Climbing
Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance.
During delivery of product, navigation of five or more flights of stairs may be required.

Stooping/Bending
Forward bending at the waist is necessary at the pizza assembly station.
Toe room is present, but workers are unable to flex their knees while standing at this station.
Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day.
Forward bending is also present at the front counter and when stocking ingredients.

Crouching/Squatting
Performed occasionally to stock shelves and to clean low areas.

Driving
Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift.

Hand Tasks
Eye-hand coordination is essential. Use of hands is continuous during the day.
Frequently activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists.
Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter.
Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes.
Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes.

Machines, Tools, Equipment, Work Aids
Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel.

Driving Specific Job Duties

• 
  
• Deliver product by car and then to door of customer.
  
• Deliver flyers and door hangers.
  

Requires
Valid driver's license with safe driving record meeting company standards.
Access to insured vehicle which can be used for delivery.

• 
  
• Medical: Multiple plan options.
  
• Dental: Delta Dental or reimbursement account for flexible coverage.
  
• Vision: Affordable plan with national network.
  
• Pre-Tax Savings: HSA and FSAs for eligible expenses.
  
• Retirement: Competitive retirement package to secure your future.
  

The registered nurse (RN) is accountable for the coordination of nursing care, including direct patient care, patient/family education and transitions of care. The RN supports professional nursing practice across practice settings and across the continuum of care to meet the needs of the patient and family. The RN will function within the Mayo Clinic Nursing Professional Practice Model, which includes accountability for planning, implementing, evaluating and communicating all phases of nursing care for assigned patients. The ANA Nursing: Scope and Standards of Practice provide a basis for the practice of the RN. The RN provides leadership through activities such as preceptor role, informal and formal leadership roles, and quality improvement efforts. The RN delegates patient care according to skill level, experience, patient acuity, fiscal accountability and availability of resources. The RN possesses excellent communication skills; is skillful in mentoring and teaching; and may participate on committees or projects. A subset of employees may be required to drive their personal vehicle as a part of the responsibility of their role. 

This role is eligible for TN sponsorship. 

Graduate of a baccalaureate nursing program, as recognized by the Accreditation Commission for Education in Nursing (ACEN), Commission on Collegiate Nursing Education (CCNE), National League for Nursing Commission for Nursing Education Accreditation (NLN CNEA). If graduated from a nursing program that was not accredited by ACEN, CCNE, or NLN CNEA, at least one year of RN experience in an applicable care setting or one year of LPN experience at Mayo Clinic is required.

All entry-level associate degree registered nurses with a RN start date of April 1, 2020 and after must provide documented evidence of program completion of the baccalaureate degree in nursing from an accredited nursing program within five years from the last day of the month of the RN start date.

All entry-level associate degree registered nurses with a RN start date prior to April 1, 2020 must provide documented evidence of program completion of the baccalaureate degree in nursing from an accredited nursing program as stipulated by the degree requirement program in place at time of hire.
One year of RN experience in an applicable care setting or one year of current LPN experience at Mayo Clinic is preferred.

 

• Excellent communication skills (verbal and written). 
• Experience working in a team environment. 
• Computer skills required, prior experience with electronic medical record systems preferred. 
• Ability to work flexible hours, which may include days, evenings, nights, holidays, and weekends and on-call. 
• Ability to adapt to unpredictable situations within the work setting. 
• Demonstrated leadership, effective communicator, and excellent critical thinking skills.
• Current RN license by applicable state requirements. 
• BLS (Basic Life Support) must be valid for 90 days post start date from American Heart Association: “BLS Provider” or American Red Cross: “Basic Life Support” or “CPR/AED for Professional Rescuers and Health Care Providers.”
• BLS required upon hire. 
• ACLS & FCCN required after hire. 
• Hem/Onc/BMT, PCU experience preferred.                      
   

At Trane TechnologiesTM  and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.

What’s in it for you:

Be a part of our mission!  As a world leader in creating comfortable, sustainable, and efficient environments, it’s our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what’s possible for a sustainable world.  

This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacturer, giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth.

Why Trane Technologies is the Best Company for HVAC Technicians:

• Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems

• Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation

• Dedicated to a military friendly environment (Veterans are highly encouraged to apply)

• Unlimited opportunities for career development and promotions

• Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)

• World Class continuing education, featuring Manufacturer (OEM) Level Training

• Company-wide commitment to promoting a strong work/life balance

• Organizational encouragement of community involvement and sustainability (green initiatives)

• Late model, clean, and dependable company vehicle, high speed laptop, and smart phone

Where is the work:

On-site (5 days)

What you will do: 

• Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.

• Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.

• Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.

• Displays team effort and dedication to customers by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.

• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.

What you will bring:

• A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred.

• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).

• Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.

• EPA Certification

Additional Requirements and Environmental Exposure:

• Must be able to safely and legally operate a vehicle using a seat belt

• Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties

• Must be able to twist the trunk of your body 90 degrees in each direction

• Must be able to squat and touch the floor with both hands

• Must be able to reach your hands over your head

• Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours

• This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.

• Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less

• Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal

• Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet +

• This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location

Compensation: 

Base Pay Range: $  24-$42/Hr  

Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. 

Equal Employment Opportunity: 

We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Fort Lauderdale, FL – Seeking Medical Assistant with Limited License X-Ray

Join our team as a Medical Assistant with Limited License X-Ray at MOOV Health & Wellness, where we are focused on outpacing aging through a physician-guided, personalized approach to wellness. In this role, you will provide each patient with an excellent experience while taking responsibility for all aspects of the radiology functions, such as monitoring maintenance, performance and quality of x-ray machines and training new Medical Assistants with Limited License X-Ray certifications. If you’re passionate about wellness and want to make a meaningful impact on people’s lives, we’d love for you to join our team.

The Opportunity

• Triage, vital and room patients.
• Record patient interview, history, and chief complaint into the Electronic Medical Record.
• Facilitate patient flow and ensure efficiency in the back office.
• Prepare patients for Physician/Advance Provider evaluation.
• Assistant Physician/Advanced Provider in evaluation and treatment of the patient.
• Administer medication/injections under the supervision of the Physician or Advanced Provider.
• Perform ordered procedures (Electrocardiogram (EKG), injections, tray set-ups, assist Physician/Advanced Provider as needed)
• Change dressings, apply bandages, and perform other first aid procedures.
• Provides accurate, legal, and ethical documentation always.
• Maintains safe, secure, and healthy work environment by establishing and following standards and procedures.
• Have knowledge of ICD-10 and CPT coding of nurse procedures.
• Monitor inventory for expiration and ordering of supplies.
• Keeps equipment operation by following manufacturer’s operating instructions and notifying clinic manager of any equipment malfunction.
• Responsible for cleaning rooms after each patient in a timely manner.
• Autoclave equipment each night.
• Assist in answering phones and taking accurate messages, as needed.
• Perform patient call-backs, as requested by physician/Advanced Provider.
• Runs all lab procedures assigned (strep, urine, drug screens).
• Execute Radiology tests per certification.
• Oversee the production of x-rays.
• Maintain accurate record of all x-ray films to include appropriate log entries, x-ray documentation for jackets, and accurate filing of films.
• Follow up on physician/radiologist interpretations of films daily.
• Maintain effective and efficient inventory of x-ray administrative and clinical supplies.
• Ensure calibration and maintenance of all x-ray equipment.
• Update x-ray control panel techniques as needed.
• Ensure coordination of normal startup and shut down procedures of the x-ray department.
• Follow all regulations for protecting patients, coworkers, and themselves from unnecessary exposure.
• Prepare appropriate and accurate documentation.

Required Experience and Competencies

• High school diploma or equivalent required.
• Two [2] years healthcare experience preferred, preferably in an urgent care/primary care setting
• Medical Assistant Certification required.
• CRT Certification required, with American Registry of Radiologic Technologists (AART).
• CPR certificate required.
• BLS certificate required.
• Familiar with charting in an electronic health record.
• Knowledge of clinical compliance.
• Solid understanding of medical insurance plans and office procedures.
• Sets and maintains high performance standards.
• Maintains a high level of productivity and self-direction.
• Excellent verbal and written communication skills.
• Team oriented with a productivity-driven demeanor.
• Ability to communicate clearly and professionally (verbally and in writing).
• Excellent customer service skills.
• Maintains confidentiality and adheres to site HIPAA policies.
• Adheres to organizational policies and procedures.
• Pays close attention to detail, accuracy and completeness.
• Completes work in a timely and consistent manner.
• Able to effectively deal with change and diverse people.

The Practice

MOOV Health and Wellness

At MOOV, we believe that aging doesn’t have to mean slowing down. Our focus is helping individuals outpace aging by embracing a proactive approach to their health. Through a personal, pioneering, and physician-led approach, we offer solutions that promote physical, mental and emotional well-being, unlocking each member’s full potential.

The Community

• Fort Lauderdale, Florida, is a coastal gem celebrated for its stunning beaches, vibrant culture, and endless sunshine.
• Located in South Florida along the Atlantic Coast, it offers a perfect blend of relaxed coastal living and big-city amenities.
• Residents enjoy boating along the city’s scenic canals—earning it the nickname “Venice of America”—as well as dining and shopping on Las Olas Boulevard.
• Nearby landmarks include the Bonnet House Museum & Gardens, Hugh Taylor Birch State Park, and the lively Riverwalk Arts & Entertainment District.
• Just a short drive away, you’ll find Miami’s dynamic nightlife and Palm Beach’s upscale charm.
• The weather stays warm year-round, making it ideal for outdoor living and beach days in every season.
• Sports fans can easily cheer on Florida’s major league teams, including the NFL Miami Dolphins, NBA Miami Heat, and NHL Florida Panthers.
• All this and more make Fort Lauderdale the perfect place to live and work.

Benefits & Beyond*

MOOV cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most support your needs of today and your plans for the future.

• Superior health plan options.
• Medical, dental, vision, HSA/FSA, life coverage, and more.
• 401(k) retirement savings plans.
• Generous paid time off.
• Voluntary benefits and family planning support.
• Professional and career development programs.
• Employee Assistance Program (EAP).
• Wellness program.
• Commuter benefits.
• Student loan refinancing discounts.

*Benefits for part-time and per diem vary. Please speak to a recruiter for more information.

MOOV does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. MOOV is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity. 

Applicants only. No agencies please.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.

As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.

• Document any discrepancies and report them to the appropriate personnel for resolution.

• Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.

• Witness and document functional tests of aircraft components and systems to detect leaks.

• Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.

• Maintain personal and tool certifications, ensuring compliance with operational standards.

• Assist and train other employees on inspection methods and procedures, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.

• Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Ability to complete Fall Protection Training.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use a respirator or have been respirator certified.

• Proficiency in reading, writing, and speaking English. 

Preferred Qualifications:

• Experience working with precision measuring tools.

• Experience sealing

Conflict of Interest: 
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.