Technoblade Died Reason Jobs in Usa
4,841 positions found — Page 3
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington .
As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials.
Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained.
You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes.
Your attention to detail and commitment to excellence will directly contribute to our operational success.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities: Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 1 Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators? 1 Years of experience reading blueprints and structural drawings.
1 Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications: Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
This role supports product development, manufacturing engineering, tooling suppliers, and production teams to ensure robust designs, efficient manufacturability, and cost-effective solutions.
Key Responsibilities Design, model, and detail progressive, transfer, and line dies using CAD software (e.g., SolidWorks, AutoCAD, CATIA, NX).
Create stamping process layouts, strip layouts, and material utilization plans.
Conduct formability analysis, draw simulations, and stress analysis to ensure part feasibility.
Collaborate with product engineering teams to refine part designs for manufacturability (DFM).
Develop die specifications, bill of materials (BOMs), and technical documentation.
Support tooling build, trials, debugging, and runoff at both internal and supplier tool shops.
Lead root-cause troubleshooting for die performance issues such as wrinkles, splits, springback, and excessive wear.
Optimize tooling for improved production rate, reduced scrap, and extended tool life.
Work with purchasing and suppliers to evaluate tool quotes, timelines, and feasibility.
Ensure all designs comply with safety standards, quality standards, and customer requirements.
Support APQP, PPAP, and launch activities for new programs.
Provide technical guidance to toolmakers, machinists, and production operators as needed.
Required Skills & Qualifications Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field (or equivalent experience).
3–10+ years of experience in metal stamping, die design, or tooling engineering.
Strong proficiency in 3D CAD and GD&T.
Understanding of stamping processes including blanking, drawing, bending, forming, and restriking.
Knowledge of tool steels, coatings, heat treatment, and die maintenance.
Ability to interpret engineering drawings, specifications, and customer standards.
Strong analytical, problem-solving, and root-cause analysis skills.
Experience supporting production in high-volume stamping environments.
Excellent communication and cross-functional collaboration skills.
Preferred Qualifications Experience with simulation software (AutoForm, Pam-Stamp, etc.).
Background in automotive or appliance metal stamping.
Experience with automation, sensors, or in-die detection.
Knowledge of lean manufacturing principles and continuous improvement methodologies.
Description:Fabricates and assembles details for all types of tooling such as jigs, fixtures, tools and dies, including pierce, blank and form dies, all standard and related tooling, standard power brake punches and dies, form blocks, plastic and wood tools, working in close conjunction with more highly -skilled tooling personnel; scribes lines for contour and hole location layouts from such references as tooling templates; prepares rough tooling stock for final finishing; trims laminated fiberglass tools; performs gating operations preparatory to casting plastic nests and faces for plastic forming tools; installs new or replaces worn or damaged bushings; mixes, prepares and applies plaster to pattern frames; makes splash frames for forming operations and takes less complex types of plaster splashes; clamps structural components for welding and locates tooling reference points on jig structures, tools and dies after methods and sequences have been determined by others; sets up and operates such equipment as drill presses, arbor presses, power shears, power saws, band files, radial drill presses, pedestal and disc grinders, and other power tools to perform such operations as grinding to form and maintain cutters, sanding, drilling, reaming, tapping, spot facing, counterboring, sawing and filing, where it is required to interpret and work from blueprints, tooling drawings and sketches, using machinist hand tools and precision measuring instruments, and exercising a knowledge of cutting characteristics of metals, feeds and speeds of machines and of related machine shop practices and procedures, including shop mathematics.
Fabricates, assembles, and reworks multiple operation router blocks and/or multiple operation hand and hydropress forming blocks and accessories, when required tooling and information are available.
Lays out flat and simple templates using empirical bend allowance formulae.
Makes templates from flat layout masters; makes sample parts from extruded or standard formed materials where pickup and/or interpretation of information from plaster patterns; fabricates individual countour templates for use in box template setups.
Performs modification and rework of the level of difficulty of the operations described above.
PERFORMS SUCH RELATED DUTIES AS:
Fabricates shims, spacers, clamps, jig base and locator pads, ribs and other structural components. Prepares rough die stock, pipe, bar, plate and tubular stock for layout, machining, painting or inspection.
Moves, positions and helps others in handling, moving and positioning parts, dies, tools, equipment, fixtures and heavy materials as assigned; assists others in braking down setups, and returns tools and fixtures to proper sources; lays out and finishes simple templates such as individual trim, drill and bend templates, working from established references and blueprints, duplicates all types of individual templates from master layouts; cuts, fits, punches, shears and repairs templates as required; operates such machinery as saws, routers drill presses, shears, pedestal and disc grinders to perform such routine operations such as trimming, burring, sanding and drilling; performs assembly of tooling.
Paints and properly identifies and codes tooling.
Improvises shop aids to facilitate completion of work assignments.
Performs disassembly and cleaning of tooling. Checks tools for wear, damage, etc., and replaces defective or worn components such as bushings, shims, clamps and pins, and reassembles same.
Helps to maintain work area and machinery in a clean and orderly condition.
May require certifications and must be able to work any shift.
Basic Qualifications:
Utilizes Blueprint Reading and shop mathematics or equivalent.
Must possess a minimum of one year of experience operating machine tools.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 9x80 every other Friday off
The base range for this position in California $27.42 - $46.82.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer.
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: Possible
Career Area: Manufacturing
Type: Full-Time
Shift: First
Primary Objective: Supervises the activities of hourly maintenance technicians and equipment to ensure continual operation for the Press area.
Major Functions and Scope:
1. Leadership & Personnel Management
· Supervise hourly maintenance personnel involved in maintenance, repair, programming, and service of plant facilities and equipment.
· Interview and train new employees as needed.
· Maintain employee performance records; provide regular coaching and feedback to improve skills and productivity.
· Evaluate and manage employee performance in accordance with company policy.
· Manage team scheduling, attendance, vacation planning, and daily work assignments to ensure proper coverage.
· Conduct safety meetings, shift hand‑off meetings, and team development sessions.
· Develop and implement training procedures to improve technical skills and support learning of new processes and equipment.
· Ensure all required technical training is provided to maintain competency across the team.
2. Equipment & Facilities Maintenance
· Ensure all press department equipment is operating safely, reliably, and efficiently.
· Oversee proper functioning of environmental equipment such as dust collectors.
· Maintain an organized press department, Powder Delivery, Enea Pad and Die shop to support safe and efficient operations.
· Inspect dies to ensure they are in proper working condition and verify die inventory adequacy to meet production planning requirements.
· Coordinate die rebuilds with external vendors and ensure timely return and quality.
· Ensure Preventive Maintenance Program execution and identify opportunities to improve equipment performance and reduce downtime.
3. Troubleshooting & Technical Support
· Troubleshoot press equipment, dies, and related process issues to ensure tile quality and maximize press throughput.
· Analyze equipment problems and determine corrective actions that minimize downtime, lower costs, and improve yield.
· Recommend improvements to systems, processes, or equipment; implement approved changes.
4. Operations & Cross‑Functional Support
· Support Operations Department as needed to maintain production flow and meet performance targets.
· Collaborate with other departments (Safety, Quality, Operations, Corporate) to resolve issues and coordinate activities.
· Assist with spare parts management to ensure availability of critical components.
5. Safety & Environmental Compliance
· Ensure all safety and environmental regulations, policies, and standards are followed.
· Perform or support safety inspections, audits, and hazard assessments.
· Promote safe work practices and reinforce compliance with procedures such as Lockout/Tagout (LOTO), machine guarding, and PPE use.
6. Planning, Documentation & Reporting · Collect and record data including requisitions, labor hours, work tags, PM documentation, and machine records. · Ensure the completion and accuracy of preventive maintenance work orders and documentation. · Provide input to improve maintenance planning, scheduling, and resource allocation.
7. Department Presence & Support · Maintain a consistent and visible presence in the press department and related areas to support maintenance and operational activities. · Be readily available on the floor to respond to equipment issues, assist technicians, and coordinate Maintenance team in real time. · Ensure strong communication and alignment between Maintenance and Operation teams throughout the shift. 8. Other Responsibilities · Perform other duties as assigned to support department and plant objectives.
Education and Knowledge:
knowledge that are required. College or Technical degree in Engineering, Electronics or related field highly preferred. High school diploma and five plus years of maintenance leadership experience may substitute for a degree. Three or more years of technical leadership experience required. Knowledge of electrical, PLC, mechanical, pneumatic, hydraulic and/or electronic equipment and systems required.
Experience:
- Requires 3 to 5 years of industrial maintenance experience and prior leadership experience. Tile manufacturing equipment knowledge is a plus.
Competencies:
- Core competencies include good communication and problem solving skills, mathematical aptitude, data analysis and interpretation, and ability to prioritize. Computer skills in word processing and spreadsheets. Strong/Proven interpersonal skills a must. Effective and persuasive communications skills both written and verbal required.
Associates Supervised:
- Hourly 10 Technicians
Other Pertinent Job Information:
- This employee will be responsible for direct reports.
- Occasional exposure to hazardous conditions caused by noise, moving mechanical parts, airborne particles, and other conditions associated with a high-traffic production floor.
- Must be able to walk long distances and stand for long periods of time.
- Bending, crouching, and stooping may be required.
- Must be able to work in non-climate-controlled facilities.
- The work environment may be a noisy, high traffic manufacturing production floor.
- May be required to work a flexible schedule to include evening and night shifts, weekends, and holidays.
- The ability to wear personal protective gear correctly most of the day.
- The ability to lift 50 pounds regularly.
Nemak is dedicated to developing technological solutions that make sustainable mobility possible. We are committed to working together across disciplines to drive innovation and to shape the future of automotive lightweighting.
The Tooling Engineer is responsible for supporting new program tooling development, production requests for die improvements, cavity replacement builds, designing gating and venting systems, managing day to day dimensional issues/die failures and carrying out validation of changes.
Main Responsibilities:
- Run flow and thermal simulation software to design and optimize gating and venting systems. Review results with cross functional teams, update tool CAD/prints and implement changes. Collect and review data to verify results.
- Analyzes tool failures and work with cross functional team to solve problems. Design innovative solutions to improve filling, thermal balance, venting and die life.
- Create, modify and maintain tool CAD and prints.
- Manage quoting, procuring and build of new program tooling, cavity replacement and other die components. Lead design review meetings.
- Other duties as assigned.
Position Requirements:
- 3-5 years experience.
- Must be proficient in Microsoft Office.
- Must be proficient in CAD.
- Must have die design experience.
- Bachelors degree.
- Journeyman toolmaker experience highly desirable.
- Experience with flow simulation software is desirable.
- Ability to multi-task.
- Strong communication skills both written and verbal.
- Must have a strong attention to detail.
Nemak USA, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Nemak USA, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Nemak USA, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Nemak USA, Inc.'s employees to perform their job duties may result in discipline up to and including discharge.
Job Title: Engineering Technician (Machine Shop & Fabrication)
Location: West Columbia, SC
Hire Type: Contract to Hire | Full time
Schedule: Mon-Fri 7a-3:30p
Pay Rate: $27/hr
Benefits: Health, Dental, Vision, 401k, PTO
Position Summary
Sterling is seeking a highly skilled Engineering Technician with strong machining, fabrication, and design experience to join our team. This role will support engineering and production initiatives by designing, fabricating, and modifying components, fixtures, and tooling in a machine shop environment. The ideal candidate is a self-starter with extensive hands-on experience in tool and die making, manual machining, and fabrication, capable of working independently while maintaining a strong commitment to safety and quality.
This role will initially be hired as an Engineering Technician III, with the opportunity for promotion to Engineering Technician IV upon transition to a core employee.
Key Responsibilities
- Design, fabricate, and modify tools, fixtures, and custom components to support engineering and production operations.
- Operate and maintain manual machining equipment, including manual lathes, manual mills, and other machine shop tools.
- Perform tool and die making, precision machining, and fabrication work based on engineering drawings and specifications.
- Utilize 3D modeling software to support design, prototyping, and process improvements.
- Develop and edit CNC programs using MasterCam when required to support machining operations.
- Create and present technical documentation, process updates, and project summaries using PowerPoint and Excel.
- Collaborate with engineering teams to design, troubleshoot, and improve mechanical systems, tooling, and fabrication processes.
- Ensure work is performed independently, safely, and in accordance with machine shop best practices and safety standards.
- Maintain a clean and organized machine shop environment and ensure equipment is properly maintained.
Required Qualifications
- 5+ years of experience in a machine shop, tool and die, fabrication, or precision machining environment.
- Associate’s degree or technical certification in Mechanical Engineering Technology, Machining, Tool & Die, or related field.
- Experience supporting engineering prototyping, R&D, or manufacturing process development.
- Experience working in high-precision or prototype fabrication environments.
- Extensive experience operating manual lathes, manual mills, and other machine shop equipment.
- Strong background in tool and die making and custom fabrication.
- Experience using 3D modeling software for mechanical design or component development.
- Proficiency with MasterCam for CNC programming or machining support.
- Strong working knowledge of Microsoft PowerPoint and Excel.
- Ability to read and interpret engineering drawings, blueprints, and technical specifications.
Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.
Job Title: Engineering Technician (Machine Shop & Fabrication)
Location: West Columbia, SC
Hire Type: Contract to Hire | Full time
Schedule: Mon-Fri 7a-3:30p
Pay Rate: $27/hr
Benefits: Health, Dental, Vision, 401k, PTO
Position Summary
Sterling is seeking a highly skilled Engineering Technician with strong machining, fabrication, and design experience to join our team. This role will support engineering and production initiatives by designing, fabricating, and modifying components, fixtures, and tooling in a machine shop environment. The ideal candidate is a self-starter with extensive hands-on experience in tool and die making, manual machining, and fabrication, capable of working independently while maintaining a strong commitment to safety and quality.
This role will initially be hired as an Engineering Technician III, with the opportunity for promotion to Engineering Technician IV upon transition to a core employee.
Key Responsibilities
- Design, fabricate, and modify tools, fixtures, and custom components to support engineering and production operations.
- Operate and maintain manual machining equipment, including manual lathes, manual mills, and other machine shop tools.
- Perform tool and die making, precision machining, and fabrication work based on engineering drawings and specifications.
- Utilize 3D modeling software to support design, prototyping, and process improvements.
- Develop and edit CNC programs using MasterCam when required to support machining operations.
- Create and present technical documentation, process updates, and project summaries using PowerPoint and Excel.
- Collaborate with engineering teams to design, troubleshoot, and improve mechanical systems, tooling, and fabrication processes.
- Ensure work is performed independently, safely, and in accordance with machine shop best practices and safety standards.
- Maintain a clean and organized machine shop environment and ensure equipment is properly maintained.
Required Qualifications
- 5+ years of experience in a machine shop, tool and die, fabrication, or precision machining environment.
- Associate’s degree or technical certification in Mechanical Engineering Technology, Machining, Tool & Die, or related field.
- Experience supporting engineering prototyping, R&D, or manufacturing process development.
- Experience working in high-precision or prototype fabrication environments.
- Extensive experience operating manual lathes, manual mills, and other machine shop equipment.
- Strong background in tool and die making and custom fabrication.
- Experience using 3D modeling software for mechanical design or component development.
- Proficiency with MasterCam for CNC programming or machining support.
- Strong working knowledge of Microsoft PowerPoint and Excel.
- Ability to read and interpret engineering drawings, blueprints, and technical specifications.
- Proven ability to work independently, troubleshoot problems, and manage projects with minimal supervision.
- Strong commitment to workplace safety and machine shop best practices.
Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.
Minimum of two years work-related experience or training preferred.
Ability to work a flexible schedule as needed.
Basic reading, writing, and math skills.
Computer experience is required.
Reports to Production Manager and Blow Mold Lead.
This position may work with little supervision.
Forklift certification (Must complete certification within 90 days of hire.) Responsibilities: This position operates and performs routine maintenance to blow mold equipment.
The incumbent is responsible for supplying bottles as a raw material to multiple PWI plants at a minimal cost to the company.
The position is required to work 12-hour shifts.
Essential Job Duties: Operates blow mold machinery and ensures through constant observation and routine inspections that high quality product is being produced.
Performs basic cleaning and preventative maintenance of equipment.
Detect jams or malfunctions and make adjustments as necessary.
Measure and visually inspect products for surface and dimension defects in order to ensure conformance to specifications, using precision measuring instruments.
Set up and operate blow molding machines to mold PET bottles.
Install dies onto machines or presses, then coat dies with parting agents, according to work order specifications.
Use a forklift to store palletized bottles in the warehouse for transport.
Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
GMP & PPE Required: While on the production floor in the plant you will be required to follow and help to enforce all GMP regulations in the plant.
Anyone entering the production floor must follow the GMP rules in their employee handbook, which includes the required hairnets, beard nets, and earplugs.
It is also required that all personnel wear safety glasses.
Follows standard operating procedures including quality checks and procedures for all operations.
Meets food safety and quality objectives and the requirements of the SQF System.
Non-Essential Job Duties: Performs any and all related work as assigned by the manager and needs of the business.
In the absence of this employee, the direct manager or appointee will cover responsibilities.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Standing
- 75% Walking
- 25% Sitting
- Rarely Bending/Stooping
- Frequently Push/Pull
- Frequently Climb heights
- Occasionally Crouch
- Occasionally Reach above shoulder level
- Occasionally Carrying/Lifting up to 40 lbs.
- Frequently Carrying/Lifting up to 50 lbs.
- Frequently Verbal communication
- Frequently Written communication
- Frequently Hearing normal conversation
- Frequently Sight, including near acuity and depth perception
- Frequently
This Jobot Job is hosted by: Ryan Anderson
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $18 - $20 per hour
A bit about us:
We are seeking a dynamic and highly skilled Permanent Tool Room Associate to join our fast-paced Engineering team. This is an exciting opportunity for a mechanically inclined individual who is passionate about the tooling and machining industry. In this role, you will be responsible for maintaining, repairing, and modifying tools, dies, and molds. You will also handle changeovers and staging molds, and operate the press. The ideal candidate should have a minimum of 2 years of experience in a similar role and have a strong understanding of tool room operations.
Why join us?
Steady work and room for growth! Advancement and training opportunities into their apprenticeship program!
Job Details
Responsibilities:
1. Perform routine maintenance of tools, dies, and molds to ensure optimal performance and longevity.
2. Diagnose and repair malfunctions in tools and equipment, utilizing your expertise in tooling repair.
3. Handle changeovers and staging of molds, ensuring they are ready for production.
4. Operate press and other machinery, adhering to safety standards at all times.
5. Assist in the development and construction of new tools and molds as a mold maker.
6. Collaborate with the engineering team to identify and implement improvements in tool design and production processes.
7. Maintain a clean and organized tool room, ensuring all tools and equipment are stored properly.
8. Document tool room activities, including maintenance and repair work, for future reference and reporting purposes.
9. Adhere to all company policies and procedures, as well as safety regulations, to ensure a safe and productive work environment.
Qualifications:
1. High school diploma or equivalent; technical or vocational training in tool and die, machining, or a related field is preferred.
2. Minimum of 2 years of experience in tool room operations, tooling repair, or a similar role.
3. Proficiency in operating machinery, such as a press, and handling changeovers and staging molds.
4. Solid understanding of tool and die, mold making, and tooling repair.
5. Excellent problem-solving skills, with the ability to diagnose and repair tool malfunctions.
6. Strong attention to detail, with the ability to maintain and organize a tool room effectively.
7. Good communication skills, with the ability to collaborate with team members and report on tool room activities.
8. Ability to adhere to safety regulations and company policies.
9. Willingness to continue learning and improving skills in tool room operations.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
Responsibilities
- Manually set up press, print, score, and die cut accurately in accordance with proper operating techniques and specs.
- Inspect all dies before and after a run to ensure any necessary repairs are made before the next run.
- Ensure all bolts for the die cut cylinder are in place and tightly secured.
- Monitor box quality including, but not limited to, loose liner, warp, correct size, die cut, and print.
- Become efficient in all aspects of the machine pre-feeder, rotary press, bundle breaker, load former.
- Ink management skills/color adjustment (PH and Viscosity).
- Perform other duties as assigned.
Qualifications
- High school diploma/GED required.
- The ability to multi-task and keep up with the pace of production while maintaining excellent quality and meeting machine efficiency goals for setup and run speeds.
- Strong communication and teamwork skills.
- Mathematical and problem-solving ability, and an ability to effectively utilize a tape measure.
- Must be willing to work overtime as required including Saturdays when needed.
Compensation & Benefits
The selected candidate will enjoy a comprehensive benefit package including medical, dental, vision, prescription drug, wellness programs, STD, LTD, life insurance, company matching 401(k) and pension. Green Bay Packaging benefits may vary by position or division.
Company Overview
Started in 1933, Green Bay Packaging Inc. is a family owned, vertically integrated company consisting of corrugated container plants, a folding carton facility, recycled and virgin containerboard mills, pressure-sensitive label roll stock plants, timberlands, a paper slitting operation, and a sawmill facility. Headquartered in Green Bay, Wis., Green Bay Packaging Inc. employs over 4,600 team members and operates 40 facilities in 16 states, each with a dedication to innovative development of its products and forestry resources, with a focus on safety, sustainability, quality, and continuous improvement. For more information about Green Bay Packaging Inc., visit .
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.
