Taylor Root Jobs in Usa

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

About the Role

We are seeking a seasoned Sr Project Manager to lead and deliver initiatives that improve scalability, efficiency, and execution across Marketing, Product, and Sales teams. This role is execution-oriented and some key areas this role will support - process optimization, operating model improvements, new system implementations, system upgrades and cross-functional delivery.

This is a hybrid role (3 days in the office) based out of our San Leandro Office. Ideal candidate is structured, proactive, and comfortable driving clarity in complex, and ambiguous environments.

You’ll Make a Difference By

Program Planning, Delivery & Reporting

• Leading end-to-end delivery of operational and transformation initiatives, including process redesign, workflow optimization, system implementations and upgrades, etc.
• Translating business and operational needs into clear project plans, milestones, and deliverables
• Supporting intake, prioritization, and sequencing of projects across multiple teams
• Building and managing detailed project plans, timelines, and resource needs
• Tracking progress against milestones, identifying risks and issues, and proactively mitigating them
• Providing clear, concise status updates to stakeholders and leadership

Cross-Functional Leadership

• Partnering closely with cross functional teams across the organization managing dependencies and handoffs across teams to ensure smooth execution
• Facilitating working sessions, decision forums, and executive readouts
• Serving as a neutral operator who can align diverse perspectives toward outcomes
• Partnering with stakeholders to assess current-state processes across Marketing, Product, and Sales, identifying gaps, inefficiencies, and root causes impacting speed, quality, and predictability
• Partnering with stakeholders to design and document future-state processes
• Driving adoption of new processes through change management, training, and enablement

Change Management & Adoption

• Partnering closely with the Organizational Change Manager to develop rollout plans to ensure successful adoption of new tools, processes, and operating models
• Coordinating training, communications, and documentation
• Measuring effectiveness post-implementation and driving continuous improvement
• Assisting with other responsibilities based on business needs

About You

• 7+ years of experience as a Project Manager leading operational, transformation, or process improvement initiatives
• Experience in Retail, eCommerce, B2B or B2C environments
• Proven experience supporting Marketing Operations, Product Operations, Sales, or similar functions
• Strong working knowledge of project management methodologies (Agile, hybrid, and waterfall)
• Demonstrated ability to manage complex, cross-functional programs with multiple stakeholders
• Excellent facilitation, communication, and stakeholder management skills
• Strong analytical and problem-solving capabilities
• Ability to drive structure and clarity in ambiguous environments
• Tools & Technical Skills
• Proficiency with project and work management tools such as JIRA, Confluence, Smartsheet
• Experience with documentation and visualization tools (Excel, PowerPoint, Visio, Lucidchart)
• Comfort building dashboards, reports, and executive-ready materials

About Ariat

Ariat is an innovative, outdoor global brand with roots in equestrian performance. We develop high-quality footwear and apparel for people who ride, work, and play outdoors, and care about performance, quality, comfort, and style.

The salary range for this position is $135,000-145,000 per year.

The salary is determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data for geographic locations. Ariat in good faith believes that this posted compensation range is accurate for this role at this location at the time of this posting. This range may be modified in the future.

Ariat’s holistic benefits package for full-time team members includes (but is not limited to):

• Medical, dental, vision, and life insurance options
• Expanded wellness and mental health benefits
• Paid time off (PTO), paid holidays, and paid volunteer days
• 401(k) with company match
• Bonus incentive plans
• Team member discount on Ariat merchandise

Note: Availability of benefits may be subject to location & employment type and may have certain eligibility requirements. Ariat reserves the right to alter these benefits in whole or in part at any time without advance notice.

Ariat will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local laws. Ariat is an Equal Opportunity Employer and considers applicants for employment without regard to race, color, religion, sex, orientation, national origin, age, disability, genetics or any other basis protected under federal, state, or local law. Ariat is committed to providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, email

Please see our Employment Candidate Privacy Policy at to learn more about how we collect, use, retain and disclose Personal Information.

Please note that Ariat does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agreement, Ariat will not consider or agree to payment of any referral compensation or recruiter/agency placement fee. In the event a recruiter or agency submits a resume or candidate without a previously signed Agreement, Ariat explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted directly to hiring managers, are deemed to be the property of Ariat.

Title: Senior Software Engineer Backend

Location: Sunnyvale, CA - Hybrid

Duration: 3-months, team extends quarterly

Please note! There are interim nights worked, once a week.

Our client is seeking a talented and passionate Staff, Software Engineer - Backend to join their team. The ideal candidate will have experience working in a large project environment with solid technical leadership abilities and strong development background in Java along with experience Cloud Implementation architecture and a proven track record of delivering high-quality scalable software applications.

Required Skills & Experience

• 7-10 years experience
• 60–70% coding, 20–30% design/architecture
• Technologies: Java, SpringBoot, Kafka, CosmosDB, Bigquery, and Kubernetes
• Owns design, ensures scalability
• Confident in pushing designs to production
• Tests own code
• Participates in cross-team contract discussions

Job Description

• Provide deep technical expertise and thought leadership that helps accelerate adoption of the absolute best engineering practices, while maintaining knowledge on industry innovations, trends, and practices.
• Lead and participate in medium to large-scale projects by reviewing project requirements, translating requirements into technical solutions, gathering requested information, writing, and developing code, and conducting unit testing. Communicating status and issues to team members and stakeholders.
• Developing highly scalable services to process millions of requests per day and solve complex software systems problems by leveraging state-of-the-art technology.
• Gaining exposure to various technologies used in Marketplace and E-commerce platforms.
• Designing and developing backend microservices and APIs for web applications using JVM ecosystem (Kotlin, Java) and other languages and frameworks (Python, Go)
• Collaborate with project teams and cross functional teams. Troubleshoot open issues and bug-fixes, ensuring on-time delivery and hand-offs. Interact with project manager to provide e input on project plan.
• Troubleshoot business and production issues by gathering information (for example, issue, impact, criticality, root cause), engaging support teams to assist in the resolution of issues. Formulate action plans, performing actions as designated in the plan. Interpret the results to determine further action, perform root cause analysis to prevent future occurrence of issues and complete online documentation.
• Provide support to the business by responding to users' questions, concerns, and issues (for example, technical feasibility, implementation strategies). Facilitate resolutions and lead cross-functional partnerships.
• Driving projects of high visibility across the organization.

Compensation: $50-$60/hour, depending on experience

Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 1st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Job Description

About the job

About the Company

With facilities in Northeast (Ashtabula) Ohio and El Paso, Texas, we emerged as a trusted leader in the metal finishing industry. We proudly serve North America’s leading manufacturers and distributors.

Our automated facilities, talented mix of experienced platers and continuous improvement professionals, and our data-driven, systems approach to plating enable us to consistently process parts correctly and on time.

We have the capability to plate complex and delicate parts, and we possess the flexibility to handle high-volume orders as well as small lot orders.

Summary/Objective of Role

The Technical Director is responsible for the performance and stability of our plating chemistry and wastewater treatment (WWT) systems.

This role ensures chemistry and WWT processes operate safely, consistently, efficiently and within defined operating parameters so production reliably meets customer specifications. The role focuses on building and maintaining disciplined process control systems so plating chemistry and wastewater treatment operate predictably and support stable production.

The Technical Director leads the company’s chemistry teams across all facilities, establishes strong process control systems, and drives continuous improvement.

We operate facilities in Ashtabula, Ohio; Jefferson, Ohio; and El Paso, Texas, each with a chemistry and wastewater treatment team reporting to the Technical Director.

Essential Functions

Process Control

• Define operating targets and specification limits for plating chemistry and WWT systems
• Ensure plating baths remain within optimal operating parameters
• Review titration, Hull cell, and lab data to detect and correct issues
• Lead root cause analysis when plating results fall outside expectations

Wastewater Treatment & Compliance

• Ensure wastewater treatment systems consistently operate within permitted limits
• Troubleshoot treatment issues and restore process control
• Maintain compliance with EPA and environmental regulations

Leadership

• Lead Chemistry Managers and Chemistry Technicians across all facilities
• Set clear expectations and hold teams accountable for performance
• Coach and develop team members to strengthen technical capability

Continuous Improvement

• Reduce process variation, scrap, rework, and chemical consumption
• Work with suppliers and industry experts to evaluate new chemistries and processes
• Identify opportunities to improve plating efficiency and reliability

Cross-Functional Collaboration

• Partner with Operations, Maintenance, Quality, and Procurement to improve process performance
• Support troubleshooting, product development, and operational improvements

Systems & Metrics Ownership

• Establish process controls and monitoring systems for plating chemistry and WWT
• Ensure lab data and operating metrics are consistently recorded and reviewed
• Identify trends before processes move out of control
• Standardize best practices across all facilities

Required Education, Experience, Skills, and Needs

• Bachelor’s degree in Chemistry, Chemical Engineering, Materials Science, or related field
• 7–10+ years of experience in electroplating
• Strong knowledge of plating chemistry control and wastewater treatment systems
• Experience leading technical or process teams in a manufacturing environment
• Strong troubleshooting and root cause analysis skills
• Ability to use data to monitor and improve process performance
• Comfortable working in a cross-functional teams.
• Willing to reside within 30 miles of Ashtabula County, Ohio.
• Strong computer skills
• Comfortable working in a high-energy, continuous improvement, results-focused environment

Preferred Experience and Education

• 10 or more years of experience supervising a staff of 5 or more associates
• Familiar with TrueChem software

Company Description

Venus et Fleur is a luxury rose atelier renowned for its meticulously handcrafted arrangements of real roses that maintain their freshness for over a year. Inspired by Parisian design, our roses are delivered in elegant keepsake boxes, creating a modern and luxurious gifting experience. Every arrangement is customized to customers’ specifications, offering a stunning array of patterns, letters, symbols, and an extensive color palette. Dedicated to artistry and innovation, our team ensures each exquisitely curated order reflects the highest standards of design and beauty.

Position Overview

The Inbound & Inventory Supervisor owns inbound execution, warehouse-controlled inventory accuracy, material availability, and warehouse standards. This role supervises 1–2 Inventory / Receiving Clerks and serves as the operational link between Supply Chain, Logistics, and Production to ensure clean material flow into and out of the warehouse.

This role is accountable for all inventory accuracy from dock receipt through warehouse storage and staged release to production. Once inventory is formally transferred to Production, ownership shifts.

In this business, small gaps create lost revenue. This role exists to eliminate those gaps inside the warehouse while ensuring safe handling, storage, and movement of all materials.

Leadership & Team Oversight

• Supervise and develop 1–2 Inventory / Receiving Clerks
• Set daily priorities for receiving, putaway, counts, replenishment, and staging
• Audit work for accuracy and scanning compliance
• Coach for detail, urgency, and disciplined execution
• Enforce SOP adherence across Receiving, Putaway, Picking, and Transfer to Production
• Hold team accountable for warehouse inventory standards

Inbound Management & Quality Control

• Lead receiving operations for florals, vessels, packaging, and consumables
• Validate quantities against POs prior to system receipt
• Inspect florals for quality and specification compliance
• Ensure lot tracking accuracy for florals
• Quarantine and resolve non-conforming materials
• Document and escalate vendor discrepancies within 24–48 hours
• Coordinate dock flow and inbound prioritization
• Ensure accurate labeling, LPN creation, and system transactions

Warehouse Inventory Accuracy & Control

• Maintain 98–99%+ accuracy for all warehouse-controlled inventory
• Design and execute A/B/C cycle count programs
• Lead daily cycle counts and reconciliation
• Perform documented root cause analysis on variances
• Identify recurring drivers of shrink within warehouse operations
• Implement corrective and preventative controls
• Monitor aging, at-risk, and space-constrained inventory

Cross-Functional & Logistics Coordination

• Partner with Logistics to understand inbound schedules, lead times, and container arrivals
• Align with Supply Chain on POs, forecasts, and inbound prioritization
• Anticipate space constraints based on inbound pipeline
• Adjust labor focus and urgency based on inbound risk
• Communicate material arrival timing and constraints to Production
• Escalate inbound delays that may affect service levels

Material Release & Production Interface

• Ensure accurate staging and system transfer of materials to Production
• Maintain clear physical and system boundaries between warehouse and production inventory
• Prevent undocumented movement of materials
• Support investigations of production-related discrepancies while maintaining ownership boundaries

Warehouse Standards & Safety

• Maintain a clean, structured, luxury-grade warehouse environment
• Ensure proper storage conditions for florals and packaging
• Enforce safe material handling practices and adherence to all warehouse safety procedures
• Identify and address safety risks related to storage, material movement, and equipment use
• Promote a proactive safety culture where hazards are reported and corrected immediately

KPIs

• 98–99%+ warehouse inventory accuracy
• 100% cycle count completion
• Zero preventable warehouse-driven stock-outs
• Inbound discrepancy resolution within 48 hours
• Reduction in warehouse-related shrink
• 100% lot traceability for florals within warehouse control
• Team scanning compliance > 99%

Qualifications

• 3–5+ years in inventory control or warehouse supervision
• Experience supervising small teams
• Strong WMS/ERP experience with lot tracking
• Experience coordinating with Logistics and Supply Chain
• Strong root cause and process control mindset
• Demonstrated continuous improvement mindset with the ability to identify process gaps and implement practical operational improvements
• Detail-driven, disciplined operator

Job Title: Mechanical Engineer – Product Validation / DVP

Location: Sunnyvale, CA

Role Overview

We are seeking an experienced Mechanical Engineer to lead the Design Verification Plan (DVP) and validation activities for complex product systems. The role involves managing and executing mechanical, environmental, and electrical validation testing while working closely with internal teams and external test houses.

The ideal candidate will have strong hands-on prototyping and fixture design experience and the ability to independently drive validation programs in a fast-paced engineering environment.

Key Responsibilities

• Lead the Design Verification Plan (DVP) for product validation and testing.
• Plan and execute structural testing including vibration, shock, and impact tests.
• Conduct environmental testing such as temperature, humidity, ingress protection, and solar load validation.
• Coordinate testing activities with external test labs and test houses.
• Design and build test fixtures, jigs, and setups for validation and reliability testing.
• Perform hands-on prototype builds and mechanical test setups.
• Analyze test results and perform root cause analysis for product failures.
• Ensure validation coverage across the entire product system including electrical and mechanical components.
• Collaborate with cross-functional teams to support product development and validation timelines.
• Work independently to drive testing programs in a fast-paced engineering environment.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering or related field.
• 5+ years of experience in product validation, testing, or reliability engineering.
• Strong experience developing and managing Design Verification Plans (DVP).
• Hands-on experience with structural testing (vibration, shock, impact).
• Experience with environmental testing (temperature, humidity, ingress, solar load).
• Experience designing test fixtures and jigs for validation testing.
• Ability to perform root cause analysis for product failures.
• Strong understanding of mechanical systems and product-level validation.

Preferred Skills

• Experience working with external test houses and certification labs.
• Background in hardware product development environments.
• Ability to work independently and manage multiple validation tasks.

Client Notes: 3rd shift

Job Description

Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment

Primary Duties & Responsibilities

Real-Time Equipment Support & Troubleshooting

• Immediately respond to breakdowns and perform on-the-spot repairs to restore production.
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation.
• Collaborate with operators to identify and resolve root causes of equipment malfunctions.
• Support line changeovers and production start-ups.

PLC and Electrical Control Support

• Diagnose and repair PLCs, HMIs, VFDs, and control-related issues.
• Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000.
• Assist with equipment upgrades, installations, and control panel builds.
• Run conduit, pull wire, and terminate Ethernet and communication cabling.

Preventive Maintenance and Continuous Improvement

• Perform scheduled preventive maintenance with focus on reliability and efficiency.
• Take ownership of specific PM areas and proactively improve them.
• Accurately document all maintenance activities in the CMMS.
• Identify recurring issues and propose long-term corrective actions.

Project and Fabrication Work

• Assist in machinery installation and facility improvement projects.
• Perform light fabrication and welding for safety and efficiency-related improvements.

Safety & Communication

• Always follow safety protocols and use proper PPE.
• Keep work areas clean, organized, and free from hazards.
• Attend and contribute to daily shift meetings and status updates.

Key Attributes & Abilities

• Strong problem-solving and troubleshooting skills.
• Ability to work under pressure and make fast, informed decisions.
• Good communication and team collaboration abilities.
• High personal accountability, attention to detail, and reliability.
• Open-minded and eager to learn new systems and technologies.
• Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed.

Qualifications & Experience

• High school diploma or equivalent required; technical certifications or trade school training preferred.
• Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment.
• Demonstrated experience with PLC troubleshooting and industrial electrical systems.
• Working knowledge of RS Logix 5000 or similar programming environments preferred.
• Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics.
• Basic welding and fabrication skills.
• Understanding of Lean principles, 5S, and Root Cause Analysis is a plus.
• Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately.

Physical Requirements

• Must be able to remain on the factory floor for long periods of time, potentially a full shift
• Ability to lift, push, pull, or carry up to 50 lbs.
• Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods
• Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort
• Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools
• Must be able to climb and work on ladders
• Ability to stay alert and react quickly to plant conditions
• Schedule may require 40+ hours per week to support manufacturing production.
• Compensation

• Location: Boston, MA
• Hybrid: 3 days on site
• Potential Convert: Yes, USC/GC ONLY no exceptions. WILL NOT SPONSOR

• ETL/ELT
• ODI
• PL/SQL coding
• 7 years’ experience
• Knowledge on how to be an admin side of things (not day to day but is able to do that)
• Scripting – Python & Unix Scripting

• Build ODI mappings/interfaces, packages, procedures, scenarios, topology configuration, ODI Agent and load plans to integrate data from multiple enterprise systems.
• Expertise in building Pl/SQL queries, procedures, data loading process, ensuring high-performance and scalability to meet the evolving data needs of the various applications.
• Design, develop, and maintain ETL/ELT pipelines using Oracle Data Integrator (ODI).
• Collaborate effectively with cross-functional teams, including other data engineers, DBA group, analysts, and business stakeholders, to understand data requirements and deliver solutions.
• Monitor and troubleshoot RMJ jobs, ODI workflows, sessions, agents, and data pipelines on Linux environments.
• Perform root cause analysis for failures related to ODI workflows, RMJ jobs, network connectivity, API integrations, and file transfers.
• Optimize ETL workflows to improve reliability, performance, and scalability.
• Use scripting and automation tools to support data processing and operational workflows.
• Work in Linux/Unix environments, using command-line tools and shell scripts for job automation and troubleshooting.
• Maintain comprehensive documentation of data processes, configurations, and best practices.
• Participate in walk-throughs which review program specifications, source code, and all technical supporting documentation, including screens/reports. Provide feedback in accordance with team standards and guidelines.
• Participate in implementation of changes, enhancements, and newly developed programs.
• Conduct technical research and provide recommendations, develop proofs of concept or prototypes, contributing to technical design of applications.
• Helping to identify coding patterns and anti-patterns and enforce implementation of the patterns through code reviews.
• Quickly resolving issues encountered by business lines in the production environment, maintaining a helpful, "high touch" approach to working with business users, performing root cause analysis, technology evaluation, and performance tuning.

Desired Qualifications:

• Degree in Computer Science, Engineering or related technical area
• 7+ years of extensive hands-on experience in ODI, Oracle Datawarehouse, Oracle PL/SQL, Linux, Python scripting, and ODI admin module (ODI Agent setup, logs configuration, certificate installation).
• Must have experience in building Pl/SQL queries for Oracle Server (incl. stored procedures, functions…) and must understand basic principles of data modeling
• Excellent collaborative and communication skills, particularly in high-stress situations
• Experience with scripting Python and Linux scripting, CLE, networking fundamentals (API, IP/ports, SFTP/FTP connectivity)
• High proficiency in development practices: unit testing, Continuous Integration (CI/CD), refactoring, clean code
• Experience with Bitbucket/GIT source control management
• Problem solving skills, able to determine upcoming risks & issues and address them accordingly.
• Ability to interpret and troubleshoot applications using logs.
• Pro-active approach and good communication skills.
• Experience with agile methodologies (Scrum, Kanban) and tools (Jira)

• Private Banking domain experience.
• Working experience in a financial service industry
• Financial application knowledge like FIS AddVantage, CRD, CRM Pivotal.
• Experience with Apache Airflow for workflow orchestration.
• Knowledge of dbt (Data Build Tool) for modern data transformations.
• Exposure to cloud data platforms or hybrid data architectures.

Key Competencies:

• Strong analytical and problem-solving skills
• Ability to work with large-scale enterprise data environments
• Excellent collaboration and communication skills
• Ability to manage multiple priorities in a fast-paced environment
• Commitment to continuous learning and technology innovation

Estimated Min Rate: $55.00

Estimated Max Rate: $72.00

What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:

• Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
• Health Savings Account (HSA) (for employees working 20+ hours per week)
• Life & Disability Insurance (for employees working 20+ hours per week)
• MetLife Voluntary Benefits
• Employee Assistance Program (EAP)
• 401K Retirement Savings Plan
• Direct Deposit & weekly epayroll
• Referral Bonus Programs
• Certification and training opportunities

Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Visit to contact us if you are an individual with a disability and require accommodation in the application process.

For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice:  working/work at home options are available for this role.